Provided by: sumo_0.25.0+dfsg1-2_amd64 bug

NAME

       SUMO - A microscopic road traffic simulation

SYNOPSIS

       sumo [OPTION]*

DESCRIPTION

       SUMO Version 0.25.0

              Copyright (C) 2001-2015 DLR and contributors; http://sumo.dlr.de

       A microscopic road traffic simulation.

   Configuration Options:
       -c, --configuration-file FILE
              Loads the named config on startup

       --save-configuration FILE
              Saves current configuration into FILE

       --save-template FILE
              Saves a configuration template (empty) into FILE

       --save-schema FILE
              Saves the configuration schema into FILE

       --save-commented
              Adds comments to saved template, configuration, or schema

   Input Options:
       -n, --net-file FILE
              Load road network description from FILE

       -r, --route-files FILE
              Load routes descriptions from FILE(s)

       -a, --additional-files FILE
              Load further descriptions from FILE(s)

       -w, --weight-files FILE
              Load edge/lane weights for online rerouting from FILE

       -x, --weight-attribute STR
              Name of the xml attribute which gives the edge weight

       --load-state FILE
              Loads a network state from FILE

       --load-state.offset TIME
              Shifts all times loaded from a saved state by the given offset

   Output Options:
       --output-prefix STR
              Prefix  which is applied to all output files. The special string 'TIME' is replaced
              by the current time.

       --netstate-dump FILE
              Save complete network states into FILE

       --netstate-dump.empty-edges
              Write also empty edges completely when dumping

       --netstate-dump.precision INT
              Write positions and speeds with the given precision (default 2)

       --emission-output FILE
              Save the emission values of each vehicle

       --battery-output FILE
              Save the battery values of each vehicle

       --battery-output.precision INT
              Write battery values with the given precision (default 2)

       --fcd-output FILE
              Save the Floating Car Data

       --fcd-output.geo
              Save the Floating Car Data using geo-coordinates (lon/lat)

       --fcd-output.signals
              Add the vehicle signal state to the FCD output (brake lights etc.)

       --full-output FILE
              Save a lot of information for each timestep (very redundant)

       --queue-output FILE
              Save the vehicle queues at the junctions (experimental)

       --vtk-output FILE
              Save complete vehicle positions inclusive speed values in the  VTK  Format  (usage:
              /path/out will produce /path/out_$TIMESTEP$.vtp files)

       --amitran-output FILE
              Save the vehicle trajectories in the Amitran format

       --summary-output FILE
              Save aggregated vehicle departure info into FILE

       --tripinfo-output FILE
              Save single vehicle trip info into FILE

       --tripinfo-output.write-unfinished
              Write tripinfo output for vehicles which have not arrived at simulation end

       --vehroute-output FILE
              Save single vehicle route info into FILE

       --vehroute-output.exit-times
              Write the exit times for all edges

       --vehroute-output.last-route
              Write the last route only

       --vehroute-output.sorted
              Sorts the output by departure time

       --vehroute-output.dua
              Write the output in the duarouter alternatives style

       --vehroute-output.intended-depart
              Write the output with the intended instead of the real departure time

       --vehroute-output.route-length
              Include total route length in the output

       --vehroute-output.write-unfinished
              Write vehroute output for vehicles which have not arrived at simulation end

       --link-output FILE
              Save links states into FILE

       --bt-output FILE
              Save  bluetooth  visibilities  into FILE (in conjunction with device.btreceiver and
              device.btsender)

       --save-state.times INT[]
              Use INT[] as times at which a network state written

       --save-state.prefix FILE
              Prefix for network states

       --save-state.files FILE
              Files for network states

   Time Options:
       -b, --begin TIME
              Defines the begin time; The simulation starts at this time

       -e, --end TIME
              Defines the end time; The simulation ends at this time

       --step-length TIME
              Defines the step duration

   Processing Options:
       -s, --route-steps TIME
              Load routes for the next number of seconds ahead

       --no-internal-links
              Disable (junction) internal links

       --ignore-junction-blocker TIME
              Ignore vehicles which block the junction after they have been standing for  SECONDS
              (-1 means never ignore)

       --ignore-accidents
              Do not check whether accidents occur

       --ignore-route-errors
              Do not check whether routes are connected

       --max-num-vehicles INT
              Delay vehicle insertion to stay within the given maximum number

       --scale FLOAT
              Scale demand by the given factor (by discarding or duplicating vehicles)

       --time-to-teleport TIME
              Specify  how  long  a  vehicle  may  wait  until being teleported, defaults to 300,
              non-positive values disable teleporting

       --time-to-teleport.highways TIME
              The waiting time after which vehicles on a fast road (speed > 69m/s) are teleported
              if they are on a non-continuing lane

       --max-depart-delay TIME
              How  long  vehicles  wait  for departure before being skipped, defaults to -1 which
              means vehicles are never skipped

       --sloppy-insert
              Whether insertion on an edge shall not be repeated in same step once failed

       --eager-insert
              Whether each vehicle is checked separately for insertion on an edge

       --random-depart-offset TIME
              Each vehicle receives a random offset to its depart value drawn uniformly from  [0,
              TIME]

       --lanechange.allow-swap
              Whether blocking vehicles trying to change lanes may be swapped

       --lanechange.duration TIME
              Duration of a lane change maneuver (default 0)

       --lanechange.overtake-right
              Whether overtaking on the right on motorways is permitted

       --pedestrian.model STR
              Select among pedestrian models ['nonInteracting', 'striping']

       --pedestrian.striping.stripe-width FLOAT
              Width  of  parallel  stripes  for segmenting a sidewalk (meters) for use with model
              'striping'

       --pedestrian.striping.dawdling FLOAT
              factor for random slow-downs [0,1] for use with model 'striping'

       --pedestrian.striping.jamtime TIME
              Time in seconds after which pedestrians start squeezing through a  jam  when  using
              model 'striping' (non-positive values disable squeezing)

   Routing Options:
       --routing-algorithm STR
              Select among routing algorithms ['dijkstra', 'astar', 'CH', 'CHWrapper']

       --weights.random-factor FLOAT
              Edge  weights  for  routing  are  dynamically  disturbed  by  a random factor drawn
              uniformly from [1,FLOAT)

       --device.rerouting.probability FLOAT
              The probability for a vehicle to have a 'rerouting' device

       --device.rerouting.explicit STR
              Assign a 'rerouting' device to named vehicles

       --device.rerouting.deterministic
              The 'rerouting' devices are set deterministic using a fraction of 1000

       --device.rerouting.period TIME
              The period with which the vehicle shall be rerouted

       --device.rerouting.pre-period TIME
              The rerouting period before depart

       --device.rerouting.adaptation-weight FLOAT
              The weight of prior edge weights

       --device.rerouting.adaptation-interval TIME
              The interval for updating the edge weights

       --device.rerouting.with-taz
              Use zones (districts) as routing startand endpoints

       --device.rerouting.init-with-loaded-weights
              Use given weight files for initializing edge weights

       --device.rerouting.shortest-path-file FILE
              Initialize lookup table for astar from the given distance matrix

       --device.rerouting.threads INT
              The number of parallel execution threads used for rerouting

       --device.rerouting.output FILE
              Save adapting weights to FILE

   Report Options:
       -v, --verbose
              Switches to verbose output

       --print-options
              Prints option values before processing

       -?, --help
              Prints this screen

       -V, --version
              Prints the current version

       -X, --xml-validation STR
              Set schema validation scheme of XML inputs ("never", "auto" or "always")

       --xml-validation.net STR
              Set schema validation scheme of SUMO network inputs ("never", "auto" or "always")

       -W, --no-warnings
              Disables output of warnings

       -l, --log FILE
              Writes all messages to FILE (implies verbose)

       --message-log FILE
              Writes all non-error messages to FILE (implies verbose)

       --error-log FILE
              Writes all warnings and errors to FILE

       --duration-log.disable
              Disable performance reports for individual simulation steps

       --duration-log.statistics
              Enable statistics on vehicle trips

       --no-step-log
              Disable console output of current simulation step

   Emissions Options:
       --phemlight-path FILE
              Determines where to load PHEMlight definitions from.

       --device.emissions.probability FLOAT
              The probability for a vehicle to have a 'emissions' device

       --device.emissions.explicit STR
              Assign a 'emissions' device to named vehicles

       --device.emissions.deterministic
              The 'emissions' devices are set deterministic using a fraction of 1000

   Communication Options:
       --device.btreceiver.probability FLOAT
              The probability for a vehicle to have a 'btreceiver' device

       --device.btreceiver.explicit STR
              Assign a 'btreceiver' device to named vehicles

       --device.btreceiver.deterministic
              The 'btreceiver' devices are set deterministic using a fraction of 1000

       --device.btreceiver.range FLOAT
              The range of the bt receiver

       --device.btreceiver.all-recognitions
              Whether all recognition point shall be written

       --device.btreceiver.offtime FLOAT
              The offtime used for calculating detection probability (in seconds)

       --device.btsender.probability FLOAT
              The probability for a vehicle to have a 'btsender' device

       --device.btsender.explicit STR
              Assign a 'btsender' device to named vehicles

       --device.btsender.deterministic
              The 'btsender' devices are set deterministic using a fraction of 1000

   Battery Options:
       --device.battery.probability FLOAT
              The probability for a vehicle to have a 'battery' device

       --device.battery.explicit STR
              Assign a 'battery' device to named vehicles

       --device.battery.deterministic
              The 'battery' devices are set deterministic using a fraction of 1000

   Example Device Options:
       --device.example.probability FLOAT
              The probability for a vehicle to have a 'example' device

       --device.example.explicit STR
              Assign a 'example' device to named vehicles

       --device.example.deterministic
              The 'example' devices are set deterministic using a fraction of 1000

       --device.example.parameter FLOAT
              An exemplary parameter which can be used by all instances of the example device

   TraCI Server Options:
       --remote-port INT
              Enables TraCI Server if set

   Random Number Options:
       --random
              Initialises the random number generator with the current system time

       --seed INT
              Initialises the random number generator with the given value

   GUI Only Options:
       --gui-settings-file FILE
              Load visualisation settings from FILE

       -Q, --quit-on-end
              Quits the GUI when the simulation stops

       -G, --game
              Start the GUI in gaming mode

       -S, --start
              Start the simulation after loading

       -T, --disable-textures
              Do not load background pictures

EXAMPLES

              sumo -b 0 -e 1000 -n net.xml -r routes.xml

              start a simulation from time 0 to 1000 with given net and routes

              sumo -c munich_config.cfg

              start with a configuration file

              sumo --help

              print help

REPORTING BUGS

       Report bugs at <http://sumo.dlr.de/trac/>.
       Get in contact via <sumo@dlr.de>.

              Copyright (C) 2001-2015 DLR and contributors; http://sumo.dlr.de

       SUMO Version 0.25.0 is part of SUMO.
       SUMO is free software: you can redistribute it and/or modify it under the terms of the GNU
       General  Public  License as published by the Free Software Foundation, either version 3 of
       the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY  WARRANTY;
       without even the implied warranty of
       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
       GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program.
       If not, see http://www.gnu.org/licenses/gpl.html