NAME

       uhd_image_loader - UHD Image Loader

DESCRIPTION

       Burn firmware and FPGA images onto connected Ettus Research devices.

SYNOPSIS

       uhd_image_loader [OPTIONS]

OPTIONS

       List options:
              --help

       Device and loader arguments:
              --args=""

       Custom firmware filepath:
              --fw-path=""

       Custom FPGA filepath:
              --fpga-path=""

       Don't burn firmware:
              --no-fw

       Don't burn FPGA:
              --no-fpga

SPECIFYING A PARTICULAR DEVICE

       Without  any arguments given through the args="" option, this utility will start a session
       with the first Ettus Research device it sees. The arguments shown below will  narrow  down
       the utility's search for a particular device:

   All devices
       The  name= and serial= arguments can be used to specify any device except an uninitialized
       USB device or an OctoClock bootloader. The type= argument  can  be  used  to  specify  any
       device, as described below:

       "type=" argument

       Argument       |     Device

       type=usrp2     |     USRP N200, USRP N210

       type=b200      |     USRP B200, USRP B210

       type=e100      |     USRP E100, USRP E110

       type=e3x0      |     USRP E310

       type=octoclock |     OctoClock

       NOTE: The USRP1, USRP2, and USRP B100 are not supported.

   Network devices
       By  default, this utility will check all network interfaces for network-based devices, but
       a specific IP address can be specified with the addr= argument.

   NI-RIO devices
       An X-Series devices connected via PCIe can be specified by its NI-RIO resource through the
       resource= argument, and the RPC port through which to communicate with it can be specified
       with the rpc-port= argument. Using these options is  not  recommended,  as  their  default
       values are almost always used.

   OctoClock devices
       An  OctoClock's  name  and  serial are only exposed when the firmware is loaded, so if the
       device only has a bootloader, only the addr= argument can be used to find it.

DEVICE-SPECIFIC LOADER OPTIONS

       Certain devices have specific options for customizing their  image  loading  process,  and
       these can be passed in through the --args="" option. These arguments are specified below:

   USRP N200, USRP N210
       The  overwrite-safe option will overwrite the device's safe-mode firmware and FPGA images.
       This is NOT RECOMMENDED, as these images serve as  the  backup  if  the  device's  primary
       images are corrupted.

       The  reset  option  will automatically reset the device once the loading process finishes.
       When the device resets, it will have its new images loaded.

   USRP X300, USRP X310 (Ethernet only)
       The configure option  will  automatically  reset  the  device  once  the  loading  process
       finishes. When the device resets, it will have its new FPGA image loaded.

       The  verify option will tell the device to internally verify the integrity of the image as
       it loads.  This greatly increases the loading time.

EXAMPLES

   Load only the default FPGA image onto a specific N2x0 device and reset
       uhd_image_loader --args="type=usrp2,addr=192.168.10.2,reset" --no-fw

   Load a custom FPGA image onto a specific X3x0 device
       uhd_image_loader               --args="type=x300,addr=192.168.40.2"                --fpga-
       path="/home/user/my_x300_fpga_image.bit"

SEE ALSO

       UHD documentation: http://files.ettus.com/manual/

       GR-UHD documentation: http://gnuradio.org/doc/doxygen/page_uhd.html

       Other UHD programs:

       uhd_images_downloader(1) usrp2_card_burner(1)

AUTHOR

       This manual page was written by Nicholas Corgan for the Debian project (but may be used by
       others).

COPYRIGHT

       Copyright (c) 2015 Ettus Research LLC

       This program is free software: you can redistribute it and/or modify it under the terms of
       the  GNU  General  Public  License  as  published  by the Free Software Foundation, either
       version 3 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY  WARRANTY;
       without  even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.