Provided by: manpages-posix_2013a-1_all 
PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux implementation of
this interface may differ (consult the corresponding Linux manual page for details of
Linux behavior), or the interface may not be implemented on Linux.
NAME
uniq — report or filter out repeated lines in a file
SYNOPSIS
uniq [−c|−d|−u] [−f fields] [−s char] [input_file [output_file]]
DESCRIPTION
The uniq utility shall read an input file comparing adjacent lines, and write one copy of
each input line on the output. The second and succeeding copies of repeated adjacent input
lines shall not be written. The trailing <newline> of each line in the input shall be
ignored when doing comparisons.
Repeated lines in the input shall not be detected if they are not adjacent.
OPTIONS
The uniq utility shall conform to the Base Definitions volume of POSIX.1‐2008, Section
12.2, Utility Syntax Guidelines, except that '+' may be recognized as an option delimiter
as well as '−'.
The following options shall be supported:
−c Precede each output line with a count of the number of times the line occurred
in the input.
−d Suppress the writing of lines that are not repeated in the input.
−f fields Ignore the first fields fields on each input line when doing comparisons, where
fields is a positive decimal integer. A field is the maximal string matched by
the basic regular expression:
[[:blank:]]*[^[:blank:]]*
If the fields option-argument specifies more fields than appear on an input
line, a null string shall be used for comparison.
−s chars Ignore the first chars characters when doing comparisons, where chars shall be a
positive decimal integer. If specified in conjunction with the −f option, the
first chars characters after the first fields fields shall be ignored. If the
chars option-argument specifies more characters than remain on an input line, a
null string shall be used for comparison.
−u Suppress the writing of lines that are repeated in the input.
OPERANDS
The following operands shall be supported:
input_file
A pathname of the input file. If the input_file operand is not specified, or if
the input_file is '−', the standard input shall be used.
output_file
A pathname of the output file. If the output_file operand is not specified, the
standard output shall be used. The results are unspecified if the file named by
output_file is the file named by input_file.
STDIN
The standard input shall be used only if no input_file operand is specified or if
input_file is '−'. See the INPUT FILES section.
INPUT FILES
The input file shall be a text file.
ENVIRONMENT VARIABLES
The following environment variables shall affect the execution of uniq:
LANG Provide a default value for the internationalization variables that are unset or
null. (See the Base Definitions volume of POSIX.1‐2008, Section 8.2,
Internationalization Variables for the precedence of internationalization
variables used to determine the values of locale categories.)
LC_ALL If set to a non-empty string value, override the values of all the other
internationalization variables.
LC_COLLATE
Determine the locale for ordering rules.
LC_CTYPE Determine the locale for the interpretation of sequences of bytes of text data
as characters (for example, single-byte as opposed to multi-byte characters in
arguments and input files) and which characters constitute a <blank> in the
current locale.
LC_MESSAGES
Determine the locale that should be used to affect the format and contents of
diagnostic messages written to standard error.
NLSPATH Determine the location of message catalogs for the processing of LC_MESSAGES.
ASYNCHRONOUS EVENTS
Default.
STDOUT
The standard output shall be used if no output_file operand is specified, and shall be
used if the output_file operand is '−' and the implementation treats the '−' as meaning
standard output. Otherwise, the standard output shall not be used. See the OUTPUT FILES
section.
STDERR
The standard error shall be used only for diagnostic messages.
OUTPUT FILES
If the −c option is specified, the output file shall be empty or each line shall be of the
form:
"%d %s", <number of duplicates>, <line>
otherwise, the output file shall be empty or each line shall be of the form:
"%s", <line>
EXTENDED DESCRIPTION
None.
EXIT STATUS
The following exit values shall be returned:
0 The utility executed successfully.
>0 An error occurred.
CONSEQUENCES OF ERRORS
Default.
The following sections are informative.
APPLICATION USAGE
The sort utility can be used to cause repeated lines to be adjacent in the input file.
EXAMPLES
The following input file data (but flushed left) was used for a test series on uniq:
#01 foo0 bar0 foo1 bar1
#02 bar0 foo1 bar1 foo1
#03 foo0 bar0 foo1 bar1
#04
#05 foo0 bar0 foo1 bar1
#06 foo0 bar0 foo1 bar1
#07 bar0 foo1 bar1 foo0
What follows is a series of test invocations of the uniq utility that use a mixture of
uniq options against the input file data. These tests verify the meaning of adjacent. The
uniq utility views the input data as a sequence of strings delimited by '\n'.
Accordingly, for the fieldsth member of the sequence, uniq interprets unique or repeated
adjacent lines strictly relative to the fields+1th member.
1. This first example tests the line counting option, comparing each line of the input
file data starting from the second field:
uniq −c −f 1 uniq_0I.t
1 #01 foo0 bar0 foo1 bar1
1 #02 bar0 foo1 bar1 foo1
1 #03 foo0 bar0 foo1 bar1
1 #04
2 #05 foo0 bar0 foo1 bar1
1 #07 bar0 foo1 bar1 foo0
The number '2', prefixing the fifth line of output, signifies that the uniq utility
detected a pair of repeated lines. Given the input data, this can only be true when
uniq is run using the −f 1 option (which shall cause uniq to ignore the first field on
each input line).
2. The second example tests the option to suppress unique lines, comparing each line of
the input file data starting from the second field:
uniq −d −f 1 uniq_0I.t
#05 foo0 bar0 foo1 bar1
3. This test suppresses repeated lines, comparing each line of the input file data
starting from the second field:
uniq −u −f 1 uniq_0I.t
#01 foo0 bar0 foo1 bar1
#02 bar0 foo1 bar1 foo1
#03 foo0 bar0 foo1 bar1
#04
#07 bar0 foo1 bar1 foo0
4. This suppresses unique lines, comparing each line of the input file data starting from
the third character:
uniq −d −s 2 uniq_0I.t
In the last example, the uniq utility found no input matching the above criteria.
RATIONALE
Some historical implementations have limited lines to be 1080 bytes in length, which does
not meet the implied {LINE_MAX} limit.
Earlier versions of this standard allowed the −number and +number options. These options
are no longer specified by POSIX.1‐2008 but may be present in some implementations.
FUTURE DIRECTIONS
None.
SEE ALSO
comm, sort
The Base Definitions volume of POSIX.1‐2008, Chapter 8, Environment Variables, Section
12.2, Utility Syntax Guidelines
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std
1003.1, 2013 Edition, Standard for Information Technology -- Portable Operating System
Interface (POSIX), The Open Group Base Specifications Issue 7, Copyright (C) 2013 by the
Institute of Electrical and Electronics Engineers, Inc and The Open Group. (This is
POSIX.1-2008 with the 2013 Technical Corrigendum 1 applied.) In the event of any
discrepancy between this version and the original IEEE and The Open Group Standard, the
original IEEE and The Open Group Standard is the referee document. The original Standard
can be obtained online at http://www.unix.org/online.html .
Any typographical or formatting errors that appear in this page are most likely to have
been introduced during the conversion of the source files to man page format. To report
such errors, see https://www.kernel.org/doc/man-pages/reporting_bugs.html .