Provided by: manpages-posix_2013a-1_all bug

PROLOG

       This  manual  page  is part of the POSIX Programmer's Manual.  The Linux implementation of
       this interface may differ (consult the corresponding Linux  manual  page  for  details  of
       Linux behavior), or the interface may not be implemented on Linux.

NAME

       uuencode — encode a binary file

SYNOPSIS

       uuencode [−m] [file] decode_pathname

DESCRIPTION

       The  uuencode  utility shall write an encoded version of the named input file, or standard
       input if no file is specified, to standard output. The output shall be encoded  using  one
       of  the  algorithms  described  in  the  STDOUT  section and shall include the file access
       permission bits (in  chmod  octal  or  symbolic  notation)  of  the  input  file  and  the
       decode_pathname,  for  re-creation  of  the  file  on another system that conforms to this
       volume of POSIX.1‐2008.

OPTIONS

       The uuencode utility shall conform to the Base Definitions volume of POSIX.1‐2008, Section
       12.2, Utility Syntax Guidelines.

       The following option shall be supported by the implementation:

       −m        Encode the output using the MIME Base64 algorithm described in STDOUT.  If −m is
                 not specified, the historical algorithm described in STDOUT shall be used.

OPERANDS

       The following operands shall be supported:

       decode_pathname
                 The pathname of the file into which the uudecode utility shall place the decoded
                 file.  Specifying  a  decode_pathname operand of /dev/stdout shall indicate that
                 uudecode is to use standard output. If there are characters  in  decode_pathname
                 that are not in the portable filename character set the results are unspecified.

       file      A pathname of the file to be encoded.

STDIN

       See the INPUT FILES section.

INPUT FILES

       Input files can be files of any type.

ENVIRONMENT VARIABLES

       The following environment variables shall affect the execution of uuencode:

       LANG      Provide a default value for the internationalization variables that are unset or
                 null.  (See  the  Base  Definitions  volume  of   POSIX.1‐2008,   Section   8.2,
                 Internationalization   Variables  for  the  precedence  of  internationalization
                 variables used to determine the values of locale categories.)

       LC_ALL    If set to a non-empty string  value,  override  the  values  of  all  the  other
                 internationalization variables.

       LC_CTYPE  Determine  the  locale for the interpretation of sequences of bytes of text data
                 as characters (for example, single-byte as opposed to multi-byte  characters  in
                 arguments and input files).

       LC_MESSAGES
                 Determine  the  locale  that should be used to affect the format and contents of
                 diagnostic messages written to standard error.

       NLSPATH   Determine the location of message catalogs for the processing of LC_MESSAGES.

ASYNCHRONOUS EVENTS

       Default.

STDOUT

   uuencode Base64 Algorithm
       The standard output shall be a text file (encoded in the  character  set  of  the  current
       locale) that begins with the line:

           "begin-base64 %s %s\n", <mode>, <decode_pathname>

       and ends with the line:

           "====\n"

       In both cases, the lines shall have no preceding or trailing <blank> characters.

       The  encoding  process  represents  24-bit  groups of input bits as output strings of four
       encoded characters. Proceeding from left to right, a 24-bit input group shall be formed by
       concatenating  three  8-bit input groups. Each 24-bit input group then shall be treated as
       four concatenated 6-bit groups, each of which shall be translated into a single  digit  in
       the  Base64  alphabet.  When encoding a bit stream via the Base64 encoding, the bit stream
       shall be presumed to be ordered with the most-significant bit first. That  is,  the  first
       bit  in the stream shall be the high-order bit in the first byte, and the eighth bit shall
       be the low-order bit in the first byte, and so on. Each 6-bit group is used  as  an  index
       into an array of 64 printable characters, as shown in Table 4-22, uuencode Base64 Values.

                                   Table 4-22: uuencode Base64 Values

              ┌──────┬──────────┬┬──────┬──────────┬┬──────┬──────────┬┬──────┬──────────┐
              │ValueEncoding ││ValueEncoding ││ValueEncoding ││ValueEncoding │
              ├──────┼──────────┼┼──────┼──────────┼┼──────┼──────────┼┼──────┼──────────┤
              │  0   │    A     ││ 17   │    R     ││ 34   │    i     ││ 51   │    z     │
              │  1   │    B     ││ 18   │    S     ││ 35   │    j     ││ 52   │    0     │
              │  2   │    C     ││ 19   │    T     ││ 36   │    k     ││ 53   │    1     │
              │  3   │    D     ││ 20   │    U     ││ 37   │    l     ││ 54   │    2     │
              │  4   │    E     ││ 21   │    V     ││ 38   │    m     ││ 55   │    3     │
              │  5   │    F     ││ 22   │    W     ││ 39   │    n     ││ 56   │    4     │
              │  6   │    G     ││ 23   │    X     ││ 40   │    o     ││ 57   │    5     │
              │  7   │    H     ││ 24   │    Y     ││ 41   │    p     ││ 58   │    6     │
              │  8   │    I     ││ 25   │    Z     ││ 42   │    q     ││ 59   │    7     │
              │  9   │    J     ││ 26   │    a     ││ 43   │    r     ││ 60   │    8     │
              │ 10   │    K     ││ 27   │    b     ││ 44   │    s     ││ 61   │    9     │
              │ 11   │    L     ││ 28   │    c     ││ 45   │    t     ││ 62   │    +     │
              │ 12   │    M     ││ 29   │    d     ││ 46   │    u     ││ 63   │    /     │
              │ 13   │    N     ││ 30   │    e     ││ 47   │    v     ││      │          │
              │ 14   │    O     ││ 31   │    f     ││ 48   │    w     ││(pad) │    =     │
              │ 15   │    P     ││ 32   │    g     ││ 49   │    x     ││      │          │
              │ 16   │    Q     ││ 33   │    h     ││ 50   │    y     ││      │          │
              └──────┴──────────┴┴──────┴──────────┴┴──────┴──────────┴┴──────┴──────────┘
       The character referenced by the index shall be placed in the output string.

       The  output  stream  (encoded  bytes)  shall  be  represented  in lines of no more than 76
       characters each. All line breaks or other characters not  found  in  the  table  shall  be
       ignored by decoding software (see uudecode).

       Special  processing shall be performed if fewer than 24 bits are available at the end of a
       message or encapsulated part of a  message.  A  full  encoding  quantum  shall  always  be
       completed at the end of a message. When fewer than 24 input bits are available in an input
       group, zero bits shall be added (on the right) to form an integral number of 6-bit groups.
       Output  character  positions that are not required to represent actual input data shall be
       set to the character '='.  Since all Base64 input is an integral number  of  octets,  only
       the following cases can arise:

        1. The  final  quantum  of  encoding  input is an integral multiple of 24 bits; here, the
           final unit of encoded output shall be an integral multiple of 4 characters with no '='
           padding.

        2. The  final  quantum  of  encoding  input  is  exactly 16 bits; here, the final unit of
           encoded output shall be three characters followed by one '=' padding character.

        3. The final quantum of encoding input is exactly 8 bits; here, the final unit of encoded
           output shall be two characters followed by two '=' padding characters.

       A terminating "====" evaluates to nothing and denotes the end of the encoded data.

   uuencode Historical Algorithm
       The  standard  output  shall  be  a text file (encoded in the character set of the current
       locale) that begins with the line:

           "begin %s %s\n" <mode>, <decode_pathname>

       and ends with the line:

           "end\n"

       In both cases, the lines shall have no preceding or trailing <blank> characters.

       The algorithm that shall be used for lines in between begin and end takes three octets  as
       input  and  writes  four  characters of output by splitting the input at six-bit intervals
       into four octets, containing data in the lower  six  bits  only.  These  octets  shall  be
       converted  to characters by adding a value of 0x20 to each octet, so that each octet is in
       the range [0x20,0x5f], and then it shall be assumed to represent a printable character  in
       the  ISO/IEC 646:1991 standard encoded character set. It then shall be translated into the
       corresponding character codes for the codeset in use in the current locale. (For  example,
       the  octet 0x41, representing 'A', would be translated to 'A' in the current codeset, such
       as 0xc1 if it were EBCDIC.)

       Where the bits of two octets are combined, the least significant bits of the  first  octet
       shall  be  shifted  left  and  combined with the most significant bits of the second octet
       shifted right. Thus the three octets A, B, C shall be converted into the four octets:

           0x20 + (( A >> 2                    ) & 0x3F)
           0x20 + (((A << 4) | ((B >> 4) & 0xF)) & 0x3F)
           0x20 + (((B << 2) | ((C >> 6) & 0x3)) & 0x3F)
           0x20 + (( C                         ) & 0x3F)

       These octets then shall be translated into the local character set.

       Each encoded line contains a length character, equal to the number  of  characters  to  be
       decoded  plus  0x20  translated to the local character set as described above, followed by
       the encoded characters. The maximum number of octets to be encoded on each line  shall  be
       45.

STDERR

       The standard error shall be used only for diagnostic messages.

OUTPUT FILES

       None.

EXTENDED DESCRIPTION

       None.

EXIT STATUS

       The following exit values shall be returned:

        0    Successful completion.

       >0    An error occurred.

CONSEQUENCES OF ERRORS

       Default.

       The following sections are informative.

APPLICATION USAGE

       The  file  is  expanded  by  35  percent  (each  three  octets  become  four, plus control
       information) causing it to take longer to transmit.

       Since this utility is intended to create files to be used  for  data  interchange  between
       systems with possibly different codesets, and to represent binary data as a text file, the
       ISO/IEC 646:1991 standard was chosen for a midpoint in the algorithm as a known  reference
       point.  The output from uuencode is a text file on the local system. If the output were in
       the ISO/IEC 646:1991 standard codeset, it might not be a text file (at least  because  the
       <newline>  characters  might  not  match),  and  the goal of creating a text file would be
       defeated. If this text file was then carried to another machine with the same codeset,  it
       would  be  perfectly compatible with that system's uudecode.  If it was transmitted over a
       mail system or sent to a machine with a different codeset, it  is  assumed  that,  as  for
       every other text file, some translation mechanism would convert it (by the time it reached
       a user on the other system) into an appropriate codeset. This translation only makes sense
       from  the  local  codeset,  not  if the file has been put into a ISO/IEC 646:1991 standard
       representation first. Similarly,  files  processed  by  uuencode  can  be  placed  in  pax
       archives, intermixed with other text files in the same codeset.

EXAMPLES

       None.

RATIONALE

       A  new  algorithm was added at the request of the international community to parallel work
       in RFC 2045 (MIME). As with the historical uuencode format, the  Base64  Content-Transfer-
       Encoding  is  designed  to  represent  arbitrary sequences of octets in a form that is not
       humanly readable. A 65-character subset of the ISO/IEC 646:1991 standard is used, enabling
       6  bits to be represented per printable character. (The extra 65th character, '=', is used
       to signify a special processing function.)

       This subset has the important property that it is represented identically in all  versions
       of the ISO/IEC 646:1991 standard, including US ASCII, and all characters in the subset are
       also represented identically in all versions of EBCDIC. The historical uuencode  algorithm
       does not share this property, which is the reason that a second algorithm was added to the
       ISO POSIX‐2 standard.

       The string "====" was used for the termination instead of the end  used  in  the  original
       format because the latter is a string that could be valid encoded input.

       In  an early draft, the −m option was named −b (for Base64), but it was renamed to reflect
       its relationship to the RFC 2045. A −u was also present to invoke the  default  algorithm,
       but since this was not historical practice, it was omitted as being unnecessary.

       See the RATIONALE section in uudecode for the derivation of the /dev/stdout symbol.

FUTURE DIRECTIONS

       None.

SEE ALSO

       chmod, mailx, uudecode

       The  Base  Definitions  volume  of POSIX.1‐2008, Chapter 8, Environment Variables, Section
       12.2, Utility Syntax Guidelines

COPYRIGHT

       Portions of this text are reprinted and  reproduced  in  electronic  form  from  IEEE  Std
       1003.1,  2013  Edition,  Standard  for Information Technology -- Portable Operating System
       Interface (POSIX), The Open Group Base Specifications Issue 7, Copyright (C) 2013  by  the
       Institute  of  Electrical  and  Electronics  Engineers,  Inc and The Open Group.  (This is
       POSIX.1-2008 with the  2013  Technical  Corrigendum  1  applied.)  In  the  event  of  any
       discrepancy  between  this  version and the original IEEE and The Open Group Standard, the
       original IEEE and The Open Group Standard is the referee document. The  original  Standard
       can be obtained online at http://www.unix.org/online.html .

       Any  typographical  or  formatting errors that appear in this page are most likely to have
       been introduced during the conversion of the source files to man page  format.  To  report
       such errors, see https://www.kernel.org/doc/man-pages/reporting_bugs.html .