Provided by: grass-doc_7.0.3-1build1_all 
NAME
v.lidar.edgedetection - Detects the object’s edges from a LIDAR data set.
KEYWORDS
vector, LIDAR, edges
SYNOPSIS
v.lidar.edgedetection
v.lidar.edgedetection --help
v.lidar.edgedetection [-e] input=name output=name [ew_step=float] [ns_step=float]
[lambda_g=float] [tgh=float] [tgl=float] [theta_g=float] [lambda_r=float]
[--overwrite] [--help] [--verbose] [--quiet] [--ui]
Flags:
-e
Estimate point density and distance
Estimate point density and distance for the input vector points within the current
region extends and quit
--overwrite
Allow output files to overwrite existing files
--help
Print usage summary
--verbose
Verbose module output
--quiet
Quiet module output
--ui
Force launching GUI dialog
Parameters:
input=name [required]
Name of input vector map
Or data source for direct OGR access
output=name [required]
Name for output vector map
ew_step=float
Length of each spline step in the east-west direction
Default: 4
ns_step=float
Length of each spline step in the north-south direction
Default: 4
lambda_g=float
Regularization weight in gradient evaluation
Default: 0.01
tgh=float
High gradient threshold for edge classification
Default: 6
tgl=float
Low gradient threshold for edge classification
Default: 3
theta_g=float
Angle range for same direction detection
Default: 0.26
lambda_r=float
Regularization weight in residual evaluation
Default: 2
DESCRIPTION
v.lidar.edgedetection is the first of three steps to filter LiDAR data. The filter aims to
recognize and extract attached and detached object (such as buildings, bridges, power
lines, trees, etc.) in order to create a Digital Terrain Model.
In particular, this module detects the edge of each single feature over the terrain
surface of a LIDAR point surface. First of all, a bilinear spline interpolation with a
Tychonov regularization parameter is performed. The gradient is minimized and the low
Tychonov regularization parameter brings the interpolated functions as close as possible
to the observations. Bicubic spline interpolation with Tychonov regularization is then
performed. However, now the curvature is minimized and the regularization parameter is set
to a high value. For each point, an interpolated value is computed from the bicubic
surface and an interpolated gradient is computed from the bilinear surface. At each point
the gradient magnitude and the direction of the edge vector are calculated, and the
residual between interpolated and observed values is computed. Two thresholds are defined
on the gradient, a high threshold tgh and a low one tgl. For each point, if the gradient
magnitude is greater than or equal to the high threshold and its residual is greater than
or equal to zero, it is labeled as an EDGE point. Similarly a point is labeled as being an
EDGE point if the gradient magnitude is greater than or equal to the low threshold, its
residual is greater than or equal to zero, and the gradient to two of eight neighboring
points is greater than the high threshold. Other points are classified as TERRAIN.
The output will be a vector map in which points has been classified as TERRAIN, EDGE or
UNKNOWN. This vector map should be the input of v.lidar.growing module.
NOTES
In this module, an external table will be created which will be useful for the next module
of the procedure of LiDAR data filtering. In this table the interpolated height values of
each point will be recorded. Also points in the output vector map will be classified as:
TERRAIN (cat = 1, layer = 1)
EDGE (cat = 2, layer = 1)
UNKNOWN (cat = 3, layer = 1)
The final result of the whole procedure (v.lidar.edgedetection, v.lidar.growing,
v.lidar.correction) will be a point classification in four categories:
TERRAIN SINGLE PULSE (cat = 1, layer = 2)
TERRAIN DOUBLE PULSE (cat = 2, layer = 2)
OBJECT SINGLE PULSE (cat = 3, layer = 2)
OBJECT DOUBLE PULSE (cat = 4, layer = 2)
EXAMPLES
Basic edge detection
v.lidar.edgedetection input=vector_last output=edge ew_step=8 ns_step=8 lambda_g=0.5
Complete workflow
# region settings (using an existing raster)
g.region raster=elev_lid792_1m
# import
v.in.lidar -tr input=points.las output=points
v.in.lidar -tr input=points.las output=points_first return_filter=first
# detection
v.lidar.edgedetection input=points output=edge ew_step=8 ns_step=8 lambda_g=0.5
v.lidar.growing input=edge output=growing first=points_first
v.lidar.correction input=growing output=correction terrain=only_terrain
# visualization of selected points
# zoom somewhere first, to make it faster
d.rast map=orthophoto
d.vect map=correction layer=2 cats=2,3,4 color=red size=0.25
d.vect map=correction layer=2 cats=1 color=0:128:0 size=0.5
# interpolation (this may take some time)
v.surf.rst input=only_terrain elevation=terrain
# get object points for 3D visualization
v.extract input=correction layer=2 cats=2,3,4 output=objects
Figure 1: Example output from complete workflow (red: objects, green: terrain)
Figure 2: 3D visualization of filtered object points (red) and terrain created from
terrain points (gray)
REFERENCES
• Antolin, R. et al., 2006. Digital terrain models determination by LiDAR
technology: Po basin experimentation. Bolletino di Geodesia e Scienze Affini, anno
LXV, n. 2, pp. 69-89.
• Brovelli M. A., Cannata M., Longoni U.M., 2004. LIDAR Data Filtering and DTM
Interpolation Within GRASS, Transactions in GIS, April 2004, vol. 8, iss. 2, pp.
155-174(20), Blackwell Publishing Ltd.
• Brovelli M. A., Cannata M., 2004. Digital Terrain model reconstruction in urban
areas from airborne laser scanning data: the method and an example for Pavia
(Northern Italy). Computers and Geosciences 30 (2004) pp.325-331
• Brovelli M. A. and Longoni U.M., 2003. Software per il filtraggio di dati LIDAR,
Rivista dell’Agenzia del Territorio, n. 3-2003, pp. 11-22 (ISSN 1593-2192).
• Brovelli M. A., Cannata M. and Longoni U.M., 2002. DTM LIDAR in area urbana,
Bollettino SIFET N.2, pp. 7-26.
• Performances of the filter can be seen in the ISPRS WG III/3 Comparison of Filters
report by Sithole, G. and Vosselman, G., 2003.
SEE ALSO
v.lidar.growing, v.lidar.correction, v.surf.bspline, v.surf.rst, v.in.lidar, v.in.ascii
AUTHORS
Original version of program in GRASS 5.4:
Maria Antonia Brovelli, Massimiliano Cannata, Ulisse Longoni and Mirko Reguzzoni
Update for GRASS 6.X:
Roberto Antolin and Gonzalo Moreno
Last changed: $Date: 2015-10-09 20:24:22 +0200 (Fri, 09 Oct 2015) $
Main index | Vector index | Topics index | Keywords index | Full index
© 2003-2016 GRASS Development Team, GRASS GIS 7.0.3 Reference Manual