Provided by: collectd-core_5.5.1-1build2_amd64 bug

NAME

       collectd.conf - Configuration for the system statistics collection daemon collectd

SYNOPSIS

         BaseDir "/var/lib/collectd"
         PIDFile "/run/collectd.pid"
         Interval 10.0

         LoadPlugin cpu
         LoadPlugin load

         <LoadPlugin df>
           Interval 3600
         </LoadPlugin>
         <Plugin df>
           ValuesPercentage true
         </Plugin>

         LoadPlugin ping
         <Plugin ping>
           Host "example.org"
           Host "provider.net"
         </Plugin>

DESCRIPTION

       This config file controls how the system statistics collection daemon collectd behaves.
       The most significant option is LoadPlugin, which controls which plugins to load. These
       plugins ultimately define collectd's behavior. If the AutoLoadPlugin option has been
       enabled, the explicit LoadPlugin lines may be omitted for all plugins with a configuration
       block, i.e. a "<Plugin ...>" block.

       The syntax of this config file is similar to the config file of the famous Apache
       webserver. Each line contains either an option (a key and a list of one or more values) or
       a section-start or -end. Empty lines and everything after a non-quoted hash-symbol ("#")
       is ignored. Keys are unquoted strings, consisting only of alphanumeric characters and the
       underscore ("_") character. Keys are handled case insensitive by collectd itself and all
       plugins included with it. Values can either be an unquoted string, a quoted string
       (enclosed in double-quotes) a number or a boolean expression. Unquoted strings consist of
       only alphanumeric characters and underscores ("_") and do not need to be quoted. Quoted
       strings are enclosed in double quotes ("""). You can use the backslash character ("\") to
       include double quotes as part of the string. Numbers can be specified in decimal and
       floating point format (using a dot "." as decimal separator), hexadecimal when using the
       "0x" prefix and octal with a leading zero (0).  Boolean values are either true or false.

       Lines may be wrapped by using "\" as the last character before the newline.  This allows
       long lines to be split into multiple lines. Quoted strings may be wrapped as well.
       However, those are treated special in that whitespace at the beginning of the following
       lines will be ignored, which allows for nicely indenting the wrapped lines.

       The configuration is read and processed in order, i.e. from top to bottom. So the plugins
       are loaded in the order listed in this config file. It is a good idea to load any logging
       plugins first in order to catch messages from plugins during configuration. Also, unless
       AutoLoadPlugin is enabled, the LoadPlugin option must occur before the appropriate
       "<Plugin ...>" block.

GLOBAL OPTIONS

       BaseDir Directory
           Sets the base directory. This is the directory beneath all RRD-files are created.
           Possibly more subdirectories are created. This is also the working directory for the
           daemon.

       LoadPlugin Plugin
           Loads the plugin Plugin. This is required to load plugins, unless the AutoLoadPlugin
           option is enabled (see below). Without any loaded plugins, collectd will be mostly
           useless.

           Only the first LoadPlugin statement or block for a given plugin name has any effect.
           This is useful when you want to split up the configuration into smaller files and want
           each file to be "self contained", i.e. it contains a Plugin block and then appropriate
           LoadPlugin statement. The downside is that if you have multiple conflicting LoadPlugin
           blocks, e.g. when they specify different intervals, only one of them (the first one
           encountered) will take effect and all others will be silently ignored.

           LoadPlugin may either be a simple configuration statement or a block with additional
           options, affecting the behavior of LoadPlugin. A simple statement looks like this:

            LoadPlugin "cpu"

           Options inside a LoadPlugin block can override default settings and influence the way
           plugins are loaded, e.g.:

            <LoadPlugin perl>
              Interval 60
            </LoadPlugin>

           The following options are valid inside LoadPlugin blocks:

           Globals true|false
               If enabled, collectd will export all global symbols of the plugin (and of all
               libraries loaded as dependencies of the plugin) and, thus, makes those symbols
               available for resolving unresolved symbols in subsequently loaded plugins if that
               is supported by your system.

               This is useful (or possibly even required), e.g., when loading a plugin that
               embeds some scripting language into the daemon (e.g. the Perl and Python plugins).
               Scripting languages usually provide means to load extensions written in C. Those
               extensions require symbols provided by the interpreter, which is loaded as a
               dependency of the respective collectd plugin.  See the documentation of those
               plugins (e.g., collectd-perl(5) or collectd-python(5)) for details.

               By default, this is disabled. As a special exception, if the plugin name is either
               "perl" or "python", the default is changed to enabled in order to keep the average
               user from ever having to deal with this low level linking stuff.

           Interval Seconds
               Sets a plugin-specific interval for collecting metrics. This overrides the global
               Interval setting. If a plugin provides own support for specifying an interval,
               that setting will take precedence.

       AutoLoadPlugin false|true
           When set to false (the default), each plugin needs to be loaded explicitly, using the
           LoadPlugin statement documented above. If a <Plugin ...> block is encountered and no
           configuration handling callback for this plugin has been registered, a warning is
           logged and the block is ignored.

           When set to true, explicit LoadPlugin statements are not required. Each <Plugin ...>
           block acts as if it was immediately preceded by a LoadPlugin statement. LoadPlugin
           statements are still required for plugins that don't provide any configuration, e.g.
           the Load plugin.

       CollectInternalStats false|true
           When set to true, various statistics about the collectd daemon will be collected, with
           "collectd" as the plugin name. Defaults to false.

           The following metrics are reported:

           "collectd-write_queue/queue_length"
               The number of metrics currently in the write queue. You can limit the queue length
               with the WriteQueueLimitLow and WriteQueueLimitHigh options.

           "collectd-write_queue/derive-dropped"
               The number of metrics dropped due to a queue length limitation.  If this value is
               non-zero, your system can't handle all incoming metrics and protects itself
               against overload by dropping metrics.

           "collectd-cache/cache_size"
               The number of elements in the metric cache (the cache you can interact with using
               collectd-unixsock(5)).

       Include Path [pattern]
           If Path points to a file, includes that file. If Path points to a directory,
           recursively includes all files within that directory and its subdirectories. If the
           "wordexp" function is available on your system, shell-like wildcards are expanded
           before files are included. This means you can use statements like the following:

             Include "/etc/collectd.d/*.conf"

           Starting with version 5.3, this may also be a block in which further options affecting
           the behavior of Include may be specified. The following option is currently allowed:

             <Include "/etc/collectd.d">
               Filter "*.conf"
             </Include>

           Filter pattern
               If the "fnmatch" function is available on your system, a shell-like wildcard
               pattern may be specified to filter which files to include. This may be used in
               combination with recursively including a directory to easily be able to
               arbitrarily mix configuration files and other documents (e.g. README files).  The
               given example is similar to the first example above but includes all files
               matching "*.conf" in any subdirectory of "/etc/collectd.d":

                 Include "/etc/collectd.d" "*.conf"

           If more than one files are included by a single Include option, the files will be
           included in lexicographical order (as defined by the "strcmp" function). Thus, you can
           e. g. use numbered prefixes to specify the order in which the files are loaded.

           To prevent loops and shooting yourself in the foot in interesting ways the nesting is
           limited to a depth of 8 levels, which should be sufficient for most uses. Since
           symlinks are followed it is still possible to crash the daemon by looping symlinks. In
           our opinion significant stupidity should result in an appropriate amount of pain.

           It is no problem to have a block like "<Plugin foo>" in more than one file, but you
           cannot include files from within blocks.

       PIDFile File
           Sets where to write the PID file to. This file is overwritten when it exists and
           deleted when the program is stopped. Some init-scripts might override this setting
           using the -P command-line option.

       PluginDir Directory
           Path to the plugins (shared objects) of collectd.

       TypesDB File [File ...]
           Set one or more files that contain the data-set descriptions. See types.db(5) for a
           description of the format of this file.

       Interval Seconds
           Configures the interval in which to query the read plugins. Obviously smaller values
           lead to a higher system load produced by collectd, while higher values lead to more
           coarse statistics.

           Warning: You should set this once and then never touch it again. If you do, you will
           have to delete all your RRD files or know some serious RRDtool magic! (Assuming you're
           using the RRDtool or RRDCacheD plugin.)

       MaxReadInterval Seconds
           Read plugin doubles interval between queries after each failed attempt to get data.

           This options limits the maximum value of the interval. The default value is 86400.

       Timeout Iterations
           Consider a value list "missing" when no update has been read or received for
           Iterations iterations. By default, collectd considers a value list missing when no
           update has been received for twice the update interval. Since this setting uses
           iterations, the maximum allowed time without update depends on the Interval
           information contained in each value list. This is used in the Threshold configuration
           to dispatch notifications about missing values, see collectd-threshold(5) for details.

       ReadThreads Num
           Number of threads to start for reading plugins. The default value is 5, but you may
           want to increase this if you have more than five plugins that take a long time to
           read. Mostly those are plugins that do network-IO. Setting this to a value higher than
           the number of registered read callbacks is not recommended.

       WriteThreads Num
           Number of threads to start for dispatching value lists to write plugins. The default
           value is 5, but you may want to increase this if you have more than five plugins that
           may take relatively long to write to.

       WriteQueueLimitHigh HighNum
       WriteQueueLimitLow LowNum
           Metrics are read by the read threads and then put into a queue to be handled by the
           write threads. If one of the write plugins is slow (e.g. network timeouts, I/O
           saturation of the disk) this queue will grow. In order to avoid running into memory
           issues in such a case, you can limit the size of this queue.

           By default, there is no limit and memory may grow indefinitely. This is most likely
           not an issue for clients, i.e. instances that only handle the local metrics. For
           servers it is recommended to set this to a non-zero value, though.

           You can set the limits using WriteQueueLimitHigh and WriteQueueLimitLow.  Each of them
           takes a numerical argument which is the number of metrics in the queue. If there are
           HighNum metrics in the queue, any new metrics will be dropped. If there are less than
           LowNum metrics in the queue, all new metrics will be enqueued. If the number of
           metrics currently in the queue is between LowNum and HighNum, the metric is dropped
           with a probability that is proportional to the number of metrics in the queue (i.e. it
           increases linearly until it reaches 100%.)

           If WriteQueueLimitHigh is set to non-zero and WriteQueueLimitLow is unset, the latter
           will default to half of WriteQueueLimitHigh.

           If you do not want to randomly drop values when the queue size is between LowNum and
           HighNum, set WriteQueueLimitHigh and WriteQueueLimitLow to the same value.

           Enabling the CollectInternalStats option is of great help to figure out the values to
           set WriteQueueLimitHigh and WriteQueueLimitLow to.

       Hostname Name
           Sets the hostname that identifies a host. If you omit this setting, the hostname will
           be determined using the gethostname(2) system call.

       FQDNLookup true|false
           If Hostname is determined automatically this setting controls whether or not the
           daemon should try to figure out the "fully qualified domain name", FQDN.  This is done
           using a lookup of the name returned by "gethostname". This option is enabled by
           default.

       PreCacheChain ChainName
       PostCacheChain ChainName
           Configure the name of the "pre-cache chain" and the "post-cache chain". Please see
           "FILTER CONFIGURATION" below on information on chains and how these setting change the
           daemon's behavior.

PLUGIN OPTIONS

       Some plugins may register own options. These options must be enclosed in a
       "Plugin"-Section. Which options exist depends on the plugin used. Some plugins require
       external configuration, too. The "apache plugin", for example, required "mod_status" to be
       configured in the webserver you're going to collect data from. These plugins are listed
       below as well, even if they don't require any configuration within collectd's
       configuration file.

       A list of all plugins and a short summary for each plugin can be found in the README file
       shipped with the sourcecode and hopefully binary packets as well.

   Plugin "aggregation"
       The Aggregation plugin makes it possible to aggregate several values into one using
       aggregation functions such as sum, average, min and max.  This can be put to a wide
       variety of uses, e.g. average and total CPU statistics for your entire fleet.

       The grouping is powerful but, as with many powerful tools, may be a bit difficult to wrap
       your head around. The grouping will therefore be demonstrated using an example: The
       average and sum of the CPU usage across all CPUs of each host is to be calculated.

       To select all the affected values for our example, set "Plugin cpu" and "Type cpu". The
       other values are left unspecified, meaning "all values". The Host, Plugin, PluginInstance,
       Type and TypeInstance options work as if they were specified in the "WHERE" clause of an
       "SELECT" SQL statement.

         Plugin "cpu"
         Type "cpu"

       Although the Host, PluginInstance (CPU number, i.e. 0, 1, 2, ...)  and TypeInstance (idle,
       user, system, ...) fields are left unspecified in the example, the intention is to have a
       new value for each host / type instance pair. This is achieved by "grouping" the values
       using the "GroupBy" option.  It can be specified multiple times to group by more than one
       field.

         GroupBy "Host"
         GroupBy "TypeInstance"

       We do neither specify nor group by plugin instance (the CPU number), so all metrics that
       differ in the CPU number only will be aggregated. Each aggregation needs at least one such
       field, otherwise no aggregation would take place.

       The full example configuration looks like this:

        <Plugin "aggregation">
          <Aggregation>
            Plugin "cpu"
            Type "cpu"

            GroupBy "Host"
            GroupBy "TypeInstance"

            CalculateSum true
            CalculateAverage true
          </Aggregation>
        </Plugin>

       There are a couple of limitations you should be aware of:

       ·   The Type cannot be left unspecified, because it is not reasonable to add apples to
           oranges. Also, the internal lookup structure won't work if you try to group by type.

       ·   There must be at least one unspecified, ungrouped field. Otherwise nothing will be
           aggregated.

       As you can see in the example above, each aggregation has its own Aggregation block. You
       can have multiple aggregation blocks and aggregation blocks may match the same values,
       i.e. one value list can update multiple aggregations. The following options are valid
       inside Aggregation blocks:

       Host Host
       Plugin Plugin
       PluginInstance PluginInstance
       Type Type
       TypeInstance TypeInstance
           Selects the value lists to be added to this aggregation. Type must be a valid data set
           name, see types.db(5) for details.

           If the string starts with and ends with a slash ("/"), the string is interpreted as a
           regular expression. The regex flavor used are POSIX extended regular expressions as
           described in regex(7). Example usage:

            Host "/^db[0-9]\\.example\\.com$/"

       GroupBy Host|Plugin|PluginInstance|TypeInstance
           Group valued by the specified field. The GroupBy option may be repeated to group by
           multiple fields.

       SetHost Host
       SetPlugin Plugin
       SetPluginInstance PluginInstance
       SetTypeInstance TypeInstance
           Sets the appropriate part of the identifier to the provided string.

           The PluginInstance should include the placeholder "%{aggregation}" which will be
           replaced with the aggregation function, e.g. "average". Not including the placeholder
           will result in duplication warnings and/or messed up values if more than one
           aggregation function are enabled.

           The following example calculates the average usage of all "even" CPUs:

            <Plugin "aggregation">
              <Aggregation>
                Plugin "cpu"
                PluginInstance "/[0,2,4,6,8]$/"
                Type "cpu"

                SetPlugin "cpu"
                SetPluginInstance "even-%{aggregation}"

                GroupBy "Host"
                GroupBy "TypeInstance"

                CalculateAverage true
              </Aggregation>
            </Plugin>

           This will create the files:

           ·   foo.example.com/cpu-even-average/cpu-idle

           ·   foo.example.com/cpu-even-average/cpu-system

           ·   foo.example.com/cpu-even-average/cpu-user

           ·   ...

       CalculateNum true|false
       CalculateSum true|false
       CalculateAverage true|false
       CalculateMinimum true|false
       CalculateMaximum true|false
       CalculateStddev true|false
           Boolean options for enabling calculation of the number of value lists, their sum,
           average, minimum, maximum and / or standard deviation. All options are disabled by
           default.

   Plugin "amqp"
       The AMQP plugin can be used to communicate with other instances of collectd or third party
       applications using an AMQP message broker. Values are sent to or received from the broker,
       which handles routing, queueing and possibly filtering or messages.

        <Plugin "amqp">
          # Send values to an AMQP broker
          <Publish "some_name">
            Host "localhost"
            Port "5672"
            VHost "/"
            User "guest"
            Password "guest"
            Exchange "amq.fanout"
        #   ExchangeType "fanout"
        #   RoutingKey "collectd"
        #   Persistent false
        #   ConnectionRetryDelay 0
        #   Format "command"
        #   StoreRates false
        #   GraphitePrefix "collectd."
        #   GraphiteEscapeChar "_"
        #   GraphiteSeparateInstances false
        #   GraphiteAlwaysAppendDS false
          </Publish>

          # Receive values from an AMQP broker
          <Subscribe "some_name">
            Host "localhost"
            Port "5672"
            VHost "/"
            User "guest"
            Password "guest"
            Exchange "amq.fanout"
        #   ExchangeType "fanout"
        #   Queue "queue_name"
        #   QueueDurable false
        #   QueueAutoDelete true
        #   RoutingKey "collectd.#"
        #   ConnectionRetryDelay 0
          </Subscribe>
        </Plugin>

       The plugin's configuration consists of a number of Publish and Subscribe blocks, which
       configure sending and receiving of values respectively. The two blocks are very similar,
       so unless otherwise noted, an option can be used in either block. The name given in the
       blocks starting tag is only used for reporting messages, but may be used to support
       flushing of certain Publish blocks in the future.

       Host Host
           Hostname or IP-address of the AMQP broker. Defaults to the default behavior of the
           underlying communications library, rabbitmq-c, which is "localhost".

       Port Port
           Service name or port number on which the AMQP broker accepts connections. This
           argument must be a string, even if the numeric form is used. Defaults to "5672".

       VHost VHost
           Name of the virtual host on the AMQP broker to use. Defaults to "/".

       User User
       Password Password
           Credentials used to authenticate to the AMQP broker. By default "guest"/"guest" is
           used.

       Exchange Exchange
           In Publish blocks, this option specifies the exchange to send values to.  By default,
           "amq.fanout" will be used.

           In Subscribe blocks this option is optional. If given, a binding between the given
           exchange and the queue is created, using the routing key if configured. See the Queue
           and RoutingKey options below.

       ExchangeType Type
           If given, the plugin will try to create the configured exchange with this type after
           connecting. When in a Subscribe block, the queue will then be bound to this exchange.

       Queue Queue (Subscribe only)
           Configures the queue name to subscribe to. If no queue name was configured explicitly,
           a unique queue name will be created by the broker.

       QueueDurable true|false (Subscribe only)
           Defines if the queue subscribed to is durable (saved to persistent storage) or
           transient (will disappear if the AMQP broker is restarted). Defaults to "false".

           This option should be used in conjunction with the Persistent option on the publish
           side.

       QueueAutoDelete true|false (Subscribe only)
           Defines if the queue subscribed to will be deleted once the last consumer
           unsubscribes. Defaults to "true".

       RoutingKey Key
           In Publish blocks, this configures the routing key to set on all outgoing messages. If
           not given, the routing key will be computed from the identifier of the value. The
           host, plugin, type and the two instances are concatenated together using dots as the
           separator and all containing dots replaced with slashes. For example
           "collectd.host/example/com.cpu.0.cpu.user". This makes it possible to receive only
           specific values using a "topic" exchange.

           In Subscribe blocks, configures the routing key used when creating a binding between
           an exchange and the queue. The usual wildcards can be used to filter messages when
           using a "topic" exchange. If you're only interested in CPU statistics, you could use
           the routing key "collectd.*.cpu.#" for example.

       Persistent true|false (Publish only)
           Selects the delivery method to use. If set to true, the persistent mode will be used,
           i.e. delivery is guaranteed. If set to false (the default), the transient delivery
           mode will be used, i.e. messages may be lost due to high load, overflowing queues or
           similar issues.

       ConnectionRetryDelay Delay
           When the connection to the AMQP broker is lost, defines the time in seconds to wait
           before attempting to reconnect. Defaults to 0, which implies collectd will attempt to
           reconnect at each read interval (in Subscribe mode) or each time values are ready for
           submission (in Publish mode).

       Format Command|JSON|Graphite (Publish only)
           Selects the format in which messages are sent to the broker. If set to Command (the
           default), values are sent as "PUTVAL" commands which are identical to the syntax used
           by the Exec and UnixSock plugins. In this case, the "Content-Type" header field will
           be set to "text/collectd".

           If set to JSON, the values are encoded in the JavaScript Object Notation, an easy and
           straight forward exchange format. The "Content-Type" header field will be set to
           "application/json".

           If set to Graphite, values are encoded in the Graphite format, which is "<metric>
           <value> <timestamp>\n". The "Content-Type" header field will be set to
           "text/graphite".

           A subscribing client should use the "Content-Type" header field to determine how to
           decode the values. Currently, the AMQP plugin itself can only decode the Command
           format.

       StoreRates true|false (Publish only)
           Determines whether or not "COUNTER", "DERIVE" and "ABSOLUTE" data sources are
           converted to a rate (i.e. a "GAUGE" value). If set to false (the default), no
           conversion is performed. Otherwise the conversion is performed using the internal
           value cache.

           Please note that currently this option is only used if the Format option has been set
           to JSON.

       GraphitePrefix (Publish and Format=Graphite only)
           A prefix can be added in the metric name when outputting in the Graphite format.  It's
           added before the Host name.  Metric name will be
           "<prefix><host><postfix><plugin><type><name>"

       GraphitePostfix (Publish and Format=Graphite only)
           A postfix can be added in the metric name when outputting in the Graphite format.
           It's added after the Host name.  Metric name will be
           "<prefix><host><postfix><plugin><type><name>"

       GraphiteEscapeChar (Publish and Format=Graphite only)
           Specify a character to replace dots (.) in the host part of the metric name.  In
           Graphite metric name, dots are used as separators between different metric parts
           (host, plugin, type).  Default is "_" (Underscore).

       GraphiteSeparateInstances true|false
           If set to true, the plugin instance and type instance will be in their own path
           component, for example "host.cpu.0.cpu.idle". If set to false (the default), the
           plugin and plugin instance (and likewise the type and type instance) are put into one
           component, for example "host.cpu-0.cpu-idle".

       GraphiteAlwaysAppendDS true|false
           If set to true, append the name of the Data Source (DS) to the "metric" identifier. If
           set to false (the default), this is only done when there is more than one DS.

   Plugin "apache"
       To configure the "apache"-plugin you first need to configure the Apache webserver
       correctly. The Apache-plugin "mod_status" needs to be loaded and working and the
       "ExtendedStatus" directive needs to be enabled. You can use the following snipped to base
       your Apache config upon:

         ExtendedStatus on
         <IfModule mod_status.c>
           <Location /mod_status>
             SetHandler server-status
           </Location>
         </IfModule>

       Since its "mod_status" module is very similar to Apache's, lighttpd is also supported. It
       introduces a new field, called "BusyServers", to count the number of currently connected
       clients. This field is also supported.

       The configuration of the Apache plugin consists of one or more "<Instance />" blocks. Each
       block requires one string argument as the instance name. For example:

        <Plugin "apache">
          <Instance "www1">
            URL "http://www1.example.com/mod_status?auto"
          </Instance>
          <Instance "www2">
            URL "http://www2.example.com/mod_status?auto"
          </Instance>
        </Plugin>

       The instance name will be used as the plugin instance. To emulate the old (version 4)
       behavior, you can use an empty string (""). In order for the plugin to work correctly,
       each instance name must be unique. This is not enforced by the plugin and it is your
       responsibility to ensure it.

       The following options are accepted within each Instance block:

       URL http://host/mod_status?auto
           Sets the URL of the "mod_status" output. This needs to be the output generated by
           "ExtendedStatus on" and it needs to be the machine readable output generated by
           appending the "?auto" argument. This option is mandatory.

       User Username
           Optional user name needed for authentication.

       Password Password
           Optional password needed for authentication.

       VerifyPeer true|false
           Enable or disable peer SSL certificate verification. See
           <http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by default.

       VerifyHost true|false
           Enable or disable peer host name verification. If enabled, the plugin checks if the
           "Common Name" or a "Subject Alternate Name" field of the SSL certificate matches the
           host name provided by the URL option. If this identity check fails, the connection is
           aborted. Obviously, only works when connecting to a SSL enabled server. Enabled by
           default.

       CACert File
           File that holds one or more SSL certificates. If you want to use HTTPS you will
           possibly need this option. What CA certificates come bundled with "libcurl" and are
           checked by default depends on the distribution you use.

       SSLCiphers list of ciphers
           Specifies which ciphers to use in the connection. The list of ciphers must specify
           valid ciphers. See <http://www.openssl.org/docs/apps/ciphers.html> for details.

       Timeout Milliseconds
           The Timeout option sets the overall timeout for HTTP requests to URL, in milliseconds.
           By default, the configured Interval is used to set the timeout.

   Plugin "apcups"
       Host Hostname
           Hostname of the host running apcupsd. Defaults to localhost. Please note that IPv6
           support has been disabled unless someone can confirm or decline that apcupsd can
           handle it.

       Port Port
           TCP-Port to connect to. Defaults to 3551.

       ReportSeconds true|false
           If set to true, the time reported in the "timeleft" metric will be converted to
           seconds. This is the recommended setting. If set to false, the default for backwards
           compatibility, the time will be reported in minutes.

   Plugin "aquaero"
       This plugin collects the value of the available sensors in an Aquaero 5 board. Aquaero 5
       is a water-cooling controller board, manufactured by Aqua Computer GmbH
       <http://www.aquacomputer.de/>, with a USB2 connection for monitoring and configuration.
       The board can handle multiple temperature sensors, fans, water pumps and water level
       sensors and adjust the output settings such as fan voltage or power used by the water pump
       based on the available inputs using a configurable controller included in the board.  This
       plugin collects all the available inputs as well as some of the output values chosen by
       this controller. The plugin is based on the libaquaero5 library provided by aquatools-ng.

       Device DevicePath
           Device path of the Aquaero 5's USB HID (human interface device), usually in the form
           "/dev/usb/hiddevX". If this option is no set the plugin will try to auto-detect the
           Aquaero 5 USB device based on vendor-ID and product-ID.

   Plugin "ascent"
       This plugin collects information about an Ascent server, a free server for the "World of
       Warcraft" game. This plugin gathers the information by fetching the XML status page using
       "libcurl" and parses it using "libxml2".

       The configuration options are the same as for the "apache" plugin above:

       URL http://localhost/ascent/status/
           Sets the URL of the XML status output.

       User Username
           Optional user name needed for authentication.

       Password Password
           Optional password needed for authentication.

       VerifyPeer true|false
           Enable or disable peer SSL certificate verification. See
           <http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by default.

       VerifyHost true|false
           Enable or disable peer host name verification. If enabled, the plugin checks if the
           "Common Name" or a "Subject Alternate Name" field of the SSL certificate matches the
           host name provided by the URL option. If this identity check fails, the connection is
           aborted. Obviously, only works when connecting to a SSL enabled server. Enabled by
           default.

       CACert File
           File that holds one or more SSL certificates. If you want to use HTTPS you will
           possibly need this option. What CA certificates come bundled with "libcurl" and are
           checked by default depends on the distribution you use.

       Timeout Milliseconds
           The Timeout option sets the overall timeout for HTTP requests to URL, in milliseconds.
           By default, the configured Interval is used to set the timeout.

   Plugin "barometer"
       This plugin reads absolute air pressure using digital barometer sensor on a I2C bus.
       Supported sensors are:

       MPL115A2 from Freescale, see
       <http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPL115A>.
       MPL3115 from Freescale see
       <http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPL3115A2>.
       BMP085 from Bosch Sensortec

       The sensor type - one of the above - is detected automatically by the plugin and indicated
       in the plugin_instance (you will see subdirectory "barometer-mpl115" or
       "barometer-mpl3115", or "barometer-bmp085"). The order of detection is BMP085 -> MPL3115
       -> MPL115A2, the first one found will be used (only one sensor can be used by the plugin).

       The plugin provides absolute barometric pressure, air pressure reduced to sea level
       (several possible approximations) and as an auxiliary value also internal sensor
       temperature. It uses (expects/provides) typical metric units - pressure in [hPa],
       temperature in [C], altitude in [m].

       It was developed and tested under Linux only. The only platform dependency is the standard
       Linux i2c-dev interface (the particular bus driver has to support the SM Bus command
       subset).

       The reduction or normalization to mean sea level pressure requires (depending on selected
       method/approximation) also altitude and reference to temperature sensor(s).  When multiple
       temperature sensors are configured the minumum of their values is always used (expecting
       that the warmer ones are affected by e.g. direct sun light at that moment).

       Synopsis:

         <Plugin "barometer">
            Device            "/dev/i2c-0";
            Oversampling      512
            PressureOffset    0.0
            TemperatureOffset 0.0
            Normalization     2
            Altitude          238.0
            TemperatureSensor "myserver/onewire-F10FCA000800/temperature"
         </Plugin>

       Device device
           The only mandatory configuration parameter.

           Device name of the I2C bus to which the sensor is connected. Note that typically you
           need to have loaded the i2c-dev module.  Using i2c-tools you can check/list i2c buses
           available on your system by:

             i2cdetect -l

           Then you can scan for devices on given bus. E.g. to scan the whole bus 0 use:

             i2cdetect -y -a 0

           This way you should be able to verify that the pressure sensor (either type) is
           connected and detected on address 0x60.

       Oversampling value
           Optional parameter controlling the oversampling/accuracy. Default value is 1 providing
           fastest and least accurate reading.

           For MPL115 this is the size of the averaging window. To filter out sensor noise a
           simple averaging using floating window of this configurable size is used. The plugin
           will use average of the last "value" measurements (value of 1 means no averaging).
           Minimal size is 1, maximal 1024.

           For MPL3115 this is the oversampling value. The actual oversampling is performed by
           the sensor and the higher value the higher accuracy and longer conversion time
           (although nothing to worry about in the collectd context).  Supported values are: 1,
           2, 4, 8, 16, 32, 64 and 128. Any other value is adjusted by the plugin to the closest
           supported one.

           For BMP085 this is the oversampling value. The actual oversampling is performed by the
           sensor and the higher value the higher accuracy and longer conversion time (although
           nothing to worry about in the collectd context).  Supported values are: 1, 2, 4, 8.
           Any other value is adjusted by the plugin to the closest supported one.

       PressureOffset offset
           Optional parameter for MPL3115 only.

           You can further calibrate the sensor by supplying pressure and/or temperature offsets.
           This is added to the measured/caclulated value (i.e. if the measured value is too high
           then use negative offset).  In hPa, default is 0.0.

       TemperatureOffset offset
           Optional parameter for MPL3115 only.

           You can further calibrate the sensor by supplying pressure and/or temperature offsets.
           This is added to the measured/caclulated value (i.e. if the measured value is too high
           then use negative offset).  In C, default is 0.0.

       Normalization method
           Optional parameter, default value is 0.

           Normalization method - what approximation/model is used to compute the mean sea level
           pressure from the air absolute pressure.

           Supported values of the "method" (integer between from 0 to 2) are:

           0 - no conversion, absolute pressure is simply copied over. For this method you do not
           need to configure "Altitude" or "TemperatureSensor".
           1 - international formula for conversion , See
           <http://en.wikipedia.org/wiki/Atmospheric_pressure#Altitude_atmospheric_pressure_variation>.
           For this method you have to configure "Altitude" but do not need "TemperatureSensor"
           (uses fixed global temperature average instead).
           2 - formula as recommended by the Deutsche Wetterdienst (German Meteorological
           Service). See <http://de.wikipedia.org/wiki/Barometrische_H%C3%B6henformel#Theorie>
           For this method you have to configure both  "Altitude" and "TemperatureSensor".
       Altitude altitude
           The altitude (in meters) of the location where you meassure the pressure.

       TemperatureSensor reference
           Temperature sensor(s) which should be used as a reference when normalizing the
           pressure using "Normalization" method 2.  When specified more sensors a minumum is
           found and used each time.  The temperature reading directly from this pressure
           sensor/plugin is typically not suitable as the pressure sensor will be probably inside
           while we want outside temperature.  The collectd reference name is something like
           <hostname>/<plugin_name>-<plugin_instance>/<type>-<type_instance> (<type_instance> is
           usually omitted when there is just single value type). Or you can figure it out from
           the path of the output data files.

   Plugin "battery"
       The battery plugin reports the remaining capacity, power and voltage of laptop batteries.

       ValuesPercentage false|true
           When enabled, remaining capacity is reported as a percentage, e.g. "42% capacity
           remaining". Otherwise the capacity is stored as reported by the battery, most likely
           in "Wh". This option does not work with all input methods, in particular when only
           "/proc/pmu" is available on an old Linux system.  Defaults to false.

       ReportDegraded false|true
           Typical laptop batteries degrade over time, meaning the capacity decreases with
           recharge cycles. The maximum charge of the previous charge cycle is tracked as "last
           full capacity" and used to determine that a battery is "fully charged".

           When this option is set to false, the default, the battery plugin will only report the
           remaining capacity. If the ValuesPercentage option is enabled, the relative remaining
           capacity is calculated as the ratio of the "remaining capacity" and the "last full
           capacity". This is what most tools, such as the status bar of desktop environments,
           also do.

           When set to true, the battery plugin will report three values: charged (remaining
           capacity), discharged (difference between "last full capacity" and "remaining
           capacity") and degraded (difference between "design capacity" and "last full
           capacity").

   Plugin "bind"
       Starting with BIND 9.5.0, the most widely used DNS server software provides extensive
       statistics about queries, responses and lots of other information.  The bind plugin
       retrieves this information that's encoded in XML and provided via HTTP and submits the
       values to collectd.

       To use this plugin, you first need to tell BIND to make this information available. This
       is done with the "statistics-channels" configuration option:

        statistics-channels {
          inet localhost port 8053;
        };

       The configuration follows the grouping that can be seen when looking at the data with an
       XSLT compatible viewer, such as a modern web browser. It's probably a good idea to make
       yourself familiar with the provided values, so you can understand what the collected
       statistics actually mean.

       Synopsis:

        <Plugin "bind">
          URL "http://localhost:8053/"
          ParseTime       false
          OpCodes         true
          QTypes          true

          ServerStats     true
          ZoneMaintStats  true
          ResolverStats   false
          MemoryStats     true

          <View "_default">
            QTypes        true
            ResolverStats true
            CacheRRSets   true

            Zone "127.in-addr.arpa/IN"
          </View>
        </Plugin>

       The bind plugin accepts the following configuration options:

       URL URL
           URL from which to retrieve the XML data. If not specified, "http://localhost:8053/"
           will be used.

       ParseTime true|false
           When set to true, the time provided by BIND will be parsed and used to dispatch the
           values. When set to false, the local time source is queried.

           This setting is set to true by default for backwards compatibility; setting this to
           false is recommended to avoid problems with timezones and localization.

       OpCodes true|false
           When enabled, statistics about the "OpCodes", for example the number of "QUERY"
           packets, are collected.

           Default: Enabled.

       QTypes true|false
           When enabled, the number of incoming queries by query types (for example "A", "MX",
           "AAAA") is collected.

           Default: Enabled.

       ServerStats true|false
           Collect global server statistics, such as requests received over IPv4 and IPv6,
           successful queries, and failed updates.

           Default: Enabled.

       ZoneMaintStats true|false
           Collect zone maintenance statistics, mostly information about notifications (zone
           updates) and zone transfers.

           Default: Enabled.

       ResolverStats true|false
           Collect resolver statistics, i. e. statistics about outgoing requests (e. g. queries
           over IPv4, lame servers). Since the global resolver counters apparently were removed
           in BIND 9.5.1 and 9.6.0, this is disabled by default. Use the ResolverStats option
           within a View "_default" block instead for the same functionality.

           Default: Disabled.

       MemoryStats
           Collect global memory statistics.

           Default: Enabled.

       Timeout Milliseconds
           The Timeout option sets the overall timeout for HTTP requests to URL, in milliseconds.
           By default, the configured Interval is used to set the timeout.

       View Name
           Collect statistics about a specific "view". BIND can behave different, mostly
           depending on the source IP-address of the request. These different configurations are
           called "views". If you don't use this feature, you most likely are only interested in
           the "_default" view.

           Within a <View name> block, you can specify which information you want to collect
           about a view. If no View block is configured, no detailed view statistics will be
           collected.

           QTypes true|false
               If enabled, the number of outgoing queries by query type (e. g. "A", "MX") is
               collected.

               Default: Enabled.

           ResolverStats true|false
               Collect resolver statistics, i. e. statistics about outgoing requests (e. g.
               queries over IPv4, lame servers).

               Default: Enabled.

           CacheRRSets true|false
               If enabled, the number of entries ("RR sets") in the view's cache by query type is
               collected. Negative entries (queries which resulted in an error, for example names
               that do not exist) are reported with a leading exclamation mark, e. g. "!A".

               Default: Enabled.

           Zone Name
               When given, collect detailed information about the given zone in the view. The
               information collected if very similar to the global ServerStats information (see
               above).

               You can repeat this option to collect detailed information about multiple zones.

               By default no detailed zone information is collected.

   Plugin "ceph"
       The ceph plugin collects values from JSON data to be parsed by libyajl
       (<https://lloyd.github.io/yajl/>) retrieved from ceph daemon admin sockets.

       A separate Daemon block must be configured for each ceph daemon to be monitored. The
       following example will read daemon statistics from four separate ceph daemons running on
       the same device (two OSDs, one MON, one MDS) :

         <Plugin ceph>
           LongRunAvgLatency false
           ConvertSpecialMetricTypes true
           <Daemon "osd.0">
             SocketPath "/var/run/ceph/ceph-osd.0.asok"
           </Daemon>
           <Daemon "osd.1">
             SocketPath "/var/run/ceph/ceph-osd.1.asok"
           </Daemon>
           <Daemon "mon.a">
             SocketPath "/var/run/ceph/ceph-mon.ceph1.asok"
           </Daemon>
           <Daemon "mds.a">
             SocketPath "/var/run/ceph/ceph-mds.ceph1.asok"
           </Daemon>
         </Plugin>

       The ceph plugin accepts the following configuration options:

       LongRunAvgLatency true|false
           If enabled, latency values(sum,count pairs) are calculated as the long run average -
           average since the ceph daemon was started = (sum / count).  When disabled, latency
           values are calculated as the average since the last collection = (sum_now - sum_last)
           / (count_now - count_last).

           Default: Disabled

       ConvertSpecialMetricTypes true|false
           If enabled, special metrics (metrics that differ in type from similar counters) are
           converted to the type of those similar counters. This currently only applies to
           filestore.journal_wr_bytes which is a counter for OSD daemons. The ceph schema reports
           this metric type as a sum,count pair while similar counters are treated as derive
           types. When converted, the sum is used as the counter value and is treated as a derive
           type.  When disabled, all metrics are treated as the types received from the ceph
           schema.

           Default: Enabled

       Each Daemon block must have a string argument for the plugin instance name.  A SocketPath
       is also required for each Daemon block:

       Daemon DaemonName
           Name to be used as the instance name for this daemon.

       SocketPath SocketPath
           Specifies the path to the UNIX admin socket of the ceph daemon.

   Plugin "cgroups"
       This plugin collects the CPU user/system time for each cgroup by reading the cpuacct.stat
       files in the first cpuacct-mountpoint (typically /sys/fs/cgroup/cpu.cpuacct on machines
       using systemd).

       CGroup Directory
           Select cgroup based on the name. Whether only matching cgroups are collected or if
           they are ignored is controlled by the IgnoreSelected option; see below.

       IgnoreSelected true|false
           Invert the selection: If set to true, all cgroups except the ones that match any one
           of the criteria are collected. By default only selected cgroups are collected if a
           selection is made. If no selection is configured at all, all cgroups are selected.

   Plugin "conntrack"
       This plugin collects IP conntrack statistics.

       OldFiles
           Assume the conntrack_count and conntrack_max files to be found in
           /proc/sys/net/ipv4/netfilter instead of /proc/sys/net/netfilter/.

   Plugin "cpu"
       The CPU plugin collects CPU usage metrics. By default, CPU usage is reported as Jiffies,
       using the "cpu" type. Two aggregations are available:

       ·   Sum, per-state, over all CPUs installed in the system; and

       ·   Sum, per-CPU, over all non-idle states of a CPU, creating an "active" state.

       The two aggregations can be combined, leading to collectd only emitting a single "active"
       metric for the entire system. As soon as one of these aggregations (or both) is enabled,
       the cpu plugin will report a percentage, rather than Jiffies. In addition, you can request
       individual, per-state, per-CPU metrics to be reported as percentage.

       The following configuration options are available:

       ReportByState true|false
           When set to true, the default, reports per-state metrics, e.g. "system", "user" and
           "idle".  When set to false, aggregates (sums) all non-idle states into one "active"
           metric.

       ReportByCpu true|false
           When set to true, the default, reports per-CPU (per-core) metrics.  When set to false,
           instead of reporting metrics for individual CPUs, only a global sum of CPU states is
           emitted.

       ValuesPercentage false|true
           This option is only considered when both, ReportByCpu and ReportByState are set to
           true. In this case, by default, metrics will be reported as Jiffies. By setting this
           option to true, you can request percentage values in the un-aggregated (per-CPU, per-
           state) mode as well.

   Plugin "cpufreq"
       This plugin doesn't have any options. It reads
       /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq (for the first CPU installed) to get
       the current CPU frequency. If this file does not exist make sure cpufreqd
       (<http://cpufreqd.sourceforge.net/>) or a similar tool is installed and an "cpu governor"
       (that's a kernel module) is loaded.

   Plugin "csv"
       DataDir Directory
           Set the directory to store CSV-files under. Per default CSV-files are generated
           beneath the daemon's working directory, i. e. the BaseDir.  The special strings stdout
           and stderr can be used to write to the standard output and standard error channels,
           respectively. This, of course, only makes much sense when collectd is running in
           foreground- or non-daemon-mode.

       StoreRates true|false
           If set to true, convert counter values to rates. If set to false (the default) counter
           values are stored as is, i. e. as an increasing integer number.

   Plugin "curl"
       The curl plugin uses the libcurl (<http://curl.haxx.se/>) to read web pages and the match
       infrastructure (the same code used by the tail plugin) to use regular expressions with the
       received data.

       The following example will read the current value of AMD stock from Google's finance page
       and dispatch the value to collectd.

         <Plugin curl>
           <Page "stock_quotes">
             URL "http://finance.google.com/finance?q=NYSE%3AAMD"
             User "foo"
             Password "bar"
             Digest false
             VerifyPeer true
             VerifyHost true
             CACert "/path/to/ca.crt"
             Header "X-Custom-Header: foobar"
             Post "foo=bar"

             MeasureResponseTime false
             MeasureResponseCode false

             <Match>
               Regex "<span +class=\"pr\"[^>]*> *([0-9]*\\.[0-9]+) *</span>"
               DSType "GaugeAverage"
               # Note: `stock_value' is not a standard type.
               Type "stock_value"
               Instance "AMD"
             </Match>
           </Page>
         </Plugin>

       In the Plugin block, there may be one or more Page blocks, each defining a web page and
       one or more "matches" to be performed on the returned data. The string argument to the
       Page block is used as plugin instance.

       The following options are valid within Page blocks:

       URL URL
           URL of the web site to retrieve. Since a regular expression will be used to extract
           information from this data, non-binary data is a big plus here ;)

       User Name
           Username to use if authorization is required to read the page.

       Password Password
           Password to use if authorization is required to read the page.

       Digest true|false
           Enable HTTP digest authentication.

       VerifyPeer true|false
           Enable or disable peer SSL certificate verification. See
           <http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by default.

       VerifyHost true|false
           Enable or disable peer host name verification. If enabled, the plugin checks if the
           "Common Name" or a "Subject Alternate Name" field of the SSL certificate matches the
           host name provided by the URL option. If this identity check fails, the connection is
           aborted. Obviously, only works when connecting to a SSL enabled server. Enabled by
           default.

       CACert file
           File that holds one or more SSL certificates. If you want to use HTTPS you will
           possibly need this option. What CA certificates come bundled with "libcurl" and are
           checked by default depends on the distribution you use.

       Header Header
           A HTTP header to add to the request. Multiple headers are added if this option is
           specified more than once.

       Post Body
           Specifies that the HTTP operation should be a POST instead of a GET. The complete data
           to be posted is given as the argument.  This option will usually need to be
           accompanied by a Header option to set an appropriate "Content-Type" for the post body
           (e.g. to "application/x-www-form-urlencoded").

       MeasureResponseTime true|false
           Measure response time for the request. If this setting is enabled, Match blocks (see
           below) are optional. Disabled by default.

           Beware that requests will get aborted if they take too long to complete. Adjust
           Timeout accordingly if you expect MeasureResponseTime to report such slow requests.

       MeasureResponseCode true|false
           Measure response code for the request. If this setting is enabled, Match blocks (see
           below) are optional. Disabled by default.

       <Match>
           One or more Match blocks that define how to match information in the data returned by
           "libcurl". The "curl" plugin uses the same infrastructure that's used by the "tail"
           plugin, so please see the documentation of the "tail" plugin below on how matches are
           defined. If the MeasureResponseTime or MeasureResponseCode options are set to true,
           Match blocks are optional.

       Timeout Milliseconds
           The Timeout option sets the overall timeout for HTTP requests to URL, in milliseconds.
           By default, the configured Interval is used to set the timeout. Prior to version
           5.5.0, there was no timeout and requests could hang indefinitely. This legacy
           behaviour can be achieved by setting the value of Timeout to 0.

           If Timeout is 0 or bigger than the Interval, keep in mind that each slow network
           connection will stall one read thread. Adjust the ReadThreads global setting
           accordingly to prevent this from blocking other plugins.

   Plugin "curl_json"
       The curl_json plugin collects values from JSON data to be parsed by libyajl
       (<https://lloyd.github.io/yajl/>) retrieved via either libcurl (<http://curl.haxx.se/>) or
       read directly from a unix socket. The former can be used, for example, to collect values
       from CouchDB documents (which are stored JSON notation), and the latter to collect values
       from a uWSGI stats socket.

       The following example will collect several values from the built-in "_stats" runtime
       statistics module of CouchDB (<http://wiki.apache.org/couchdb/Runtime_Statistics>).

         <Plugin curl_json>
           <URL "http://localhost:5984/_stats">
             Instance "httpd"
             <Key "httpd/requests/count">
               Type "http_requests"
             </Key>

             <Key "httpd_request_methods/*/count">
               Type "http_request_methods"
             </Key>

             <Key "httpd_status_codes/*/count">
               Type "http_response_codes"
             </Key>
           </URL>
         </Plugin>

       This example will collect data directly from a uWSGI "Stats Server" socket.

         <Plugin curl_json>
           <Sock "/var/run/uwsgi.stats.sock">
             Instance "uwsgi"
             <Key "workers/*/requests">
               Type "http_requests"
             </Key>

             <Key "workers/*/apps/*/requests">
               Type "http_requests"
             </Key>
           </Sock>
         </Plugin>

       In the Plugin block, there may be one or more URL blocks, each defining a URL to be
       fetched via HTTP (using libcurl) or Sock blocks defining a unix socket to read JSON from
       directly.  Each of these blocks may have one or more Key blocks.

       The Key string argument must be in a path format. Each component is used to match the key
       from a JSON map or the index of an JSON array. If a path component of a Key is a
       * wildcard, the values for all map keys or array indices will be collectd.

       The following options are valid within URL blocks:

       Instance Instance
           Sets the plugin instance to Instance.

       Interval Interval
           Sets the interval (in seconds) in which the values will be collected from this URL. By
           default the global Interval setting will be used.

       User Name
       Password Password
       Digest true|false
       VerifyPeer true|false
       VerifyHost true|false
       CACert file
       Header Header
       Post Body
       Timeout Milliseconds
           These options behave exactly equivalent to the appropriate options of the cURL plugin.
           Please see there for a detailed description.

       The following options are valid within Key blocks:

       Type Type
           Sets the type used to dispatch the values to the daemon. Detailed information about
           types and their configuration can be found in types.db(5). This option is mandatory.

       Instance Instance
           Type-instance to use. Defaults to the current map key or current string array element
           value.

   Plugin "curl_xml"
       The curl_xml plugin uses libcurl (<http://curl.haxx.se/>) and libxml2
       (<http://xmlsoft.org/>) to retrieve XML data via cURL.

        <Plugin "curl_xml">
          <URL "http://localhost/stats.xml">
            Host "my_host"
            Instance "some_instance"
            User "collectd"
            Password "thaiNg0I"
            VerifyPeer true
            VerifyHost true
            CACert "/path/to/ca.crt"
            Header "X-Custom-Header: foobar"
            Post "foo=bar"

            <XPath "table[@id=\"magic_level\"]/tr">
              Type "magic_level"
              #InstancePrefix "prefix-"
              InstanceFrom "td[1]"
              ValuesFrom "td[2]/span[@class=\"level\"]"
            </XPath>
          </URL>
        </Plugin>

       In the Plugin block, there may be one or more URL blocks, each defining a URL to be
       fetched using libcurl. Within each URL block there are options which specify the
       connection parameters, for example authentication information, and one or more XPath
       blocks.

       Each XPath block specifies how to get one type of information. The string argument must be
       a valid XPath expression which returns a list of "base elements". One value is dispatched
       for each "base element". The type instance and values are looked up using further XPath
       expressions that should be relative to the base element.

       Within the URL block the following options are accepted:

       Host Name
           Use Name as the host name when submitting values. Defaults to the global host name
           setting.

       Instance Instance
           Use Instance as the plugin instance when submitting values. Defaults to an empty
           string (no plugin instance).

       Namespace Prefix URL
           If an XPath expression references namespaces, they must be specified with this option.
           Prefix is the "namespace prefix" used in the XML document.  URL is the "namespace
           name", an URI reference uniquely identifying the namespace. The option can be repeated
           to register multiple namespaces.

           Examples:

             Namespace "s" "http://schemas.xmlsoap.org/soap/envelope/"
             Namespace "m" "http://www.w3.org/1998/Math/MathML"

       User User
       Password Password
       Digest true|false
       VerifyPeer true|false
       VerifyHost true|false
       CACert CA Cert File
       Header Header
       Post Body
       Timeout Milliseconds
           These options behave exactly equivalent to the appropriate options of the cURL plugin.
           Please see there for a detailed description.

       <XPath XPath-expression>
           Within each URL block, there must be one or more XPath blocks. Each XPath block
           specifies how to get one type of information. The string argument must be a valid
           XPath expression which returns a list of "base elements". One value is dispatched for
           each "base element".

           Within the XPath block the following options are accepted:

           Type Type
               Specifies the Type used for submitting patches. This determines the number of
               values that are required / expected and whether the strings are parsed as signed
               or unsigned integer or as double values. See types.db(5) for details.  This option
               is required.

           InstancePrefix InstancePrefix
               Prefix the type instance with InstancePrefix. The values are simply concatenated
               together without any separator.  This option is optional.

           InstanceFrom InstanceFrom
               Specifies a XPath expression to use for determining the type instance. The XPath
               expression must return exactly one element. The element's value is then used as
               type instance, possibly prefixed with InstancePrefix (see above).

               This value is required. As a special exception, if the "base XPath expression"
               (the argument to the XPath block) returns exactly one argument, then this option
               may be omitted.

           ValuesFrom ValuesFrom [ValuesFrom ...]
               Specifies one or more XPath expression to use for reading the values. The number
               of XPath expressions must match the number of data sources in the type specified
               with Type (see above). Each XPath expression must return exactly one element. The
               element's value is then parsed as a number and used as value for the appropriate
               value in the value list dispatched to the daemon.

   Plugin "dbi"
       This plugin uses the dbi library (<http://libdbi.sourceforge.net/>) to connect to various
       databases, execute SQL statements and read back the results. dbi is an acronym for
       "database interface" in case you were wondering about the name. You can configure how each
       column is to be interpreted and the plugin will generate one or more data sets from each
       row returned according to these rules.

       Because the plugin is very generic, the configuration is a little more complex than those
       of other plugins. It usually looks something like this:

         <Plugin dbi>
           <Query "out_of_stock">
             Statement "SELECT category, COUNT(*) AS value FROM products WHERE in_stock = 0 GROUP BY category"
             # Use with MySQL 5.0.0 or later
             MinVersion 50000
             <Result>
               Type "gauge"
               InstancePrefix "out_of_stock"
               InstancesFrom "category"
               ValuesFrom "value"
             </Result>
           </Query>
           <Database "product_information">
             Driver "mysql"
             DriverOption "host" "localhost"
             DriverOption "username" "collectd"
             DriverOption "password" "aZo6daiw"
             DriverOption "dbname" "prod_info"
             SelectDB "prod_info"
             Query "out_of_stock"
           </Database>
         </Plugin>

       The configuration above defines one query with one result and one database. The query is
       then linked to the database with the Query option within the <Database> block. You can
       have any number of queries and databases and you can also use the Include statement to
       split up the configuration file in multiple, smaller files. However, the <Query> block
       must precede the <Database> blocks, because the file is interpreted from top to bottom!

       The following is a complete list of options:

       Query blocks

       Query blocks define SQL statements and how the returned data should be interpreted. They
       are identified by the name that is given in the opening line of the block. Thus the name
       needs to be unique. Other than that, the name is not used in collectd.

       In each Query block, there is one or more Result blocks. Result blocks define which column
       holds which value or instance information. You can use multiple Result blocks to create
       multiple values from one returned row. This is especially useful, when queries take a long
       time and sending almost the same query again and again is not desirable.

       Example:

         <Query "environment">
           Statement "select station, temperature, humidity from environment"
           <Result>
             Type "temperature"
             # InstancePrefix "foo"
             InstancesFrom "station"
             ValuesFrom "temperature"
           </Result>
           <Result>
             Type "humidity"
             InstancesFrom "station"
             ValuesFrom "humidity"
           </Result>
         </Query>

       The following options are accepted:

       Statement SQL
           Sets the statement that should be executed on the server. This is not interpreted by
           collectd, but simply passed to the database server. Therefore, the SQL dialect that's
           used depends on the server collectd is connected to.

           The query has to return at least two columns, one for the instance and one value. You
           cannot omit the instance, even if the statement is guaranteed to always return exactly
           one line. In that case, you can usually specify something like this:

             Statement "SELECT \"instance\", COUNT(*) AS value FROM table"

           (That works with MySQL but may not be valid SQL according to the spec. If you use a
           more strict database server, you may have to select from a dummy table or something.)

           Please note that some databases, for example Oracle, will fail if you include a
           semicolon at the end of the statement.

       MinVersion Version
       MaxVersion Value
           Only use this query for the specified database version. You can use these options to
           provide multiple queries with the same name but with a slightly different syntax. The
           plugin will use only those queries, where the specified minimum and maximum versions
           fit the version of the database in use.

           The database version is determined by "dbi_conn_get_engine_version", see the libdbi
           documentation <http://libdbi.sourceforge.net/docs/programmers-guide/reference-
           conn.html#DBI-CONN-GET-ENGINE-VERSION> for details. Basically, each part of the
           version is assumed to be in the range from 00 to 99 and all dots are removed. So
           version "4.1.2" becomes "40102", version "5.0.42" becomes "50042".

           Warning: The plugin will use all matching queries, so if you specify multiple queries
           with the same name and overlapping ranges, weird stuff will happen. Don't to it! A
           valid example would be something along these lines:

             MinVersion 40000
             MaxVersion 49999
             ...
             MinVersion 50000
             MaxVersion 50099
             ...
             MinVersion 50100
             # No maximum

           In the above example, there are three ranges that don't overlap. The last one goes
           from version "5.1.0" to infinity, meaning "all later versions". Versions before
           "4.0.0" are not specified.

       Type Type
           The type that's used for each line returned. See types.db(5) for more details on how
           types are defined. In short: A type is a predefined layout of data and the number of
           values and type of values has to match the type definition.

           If you specify "temperature" here, you need exactly one gauge column. If you specify
           "if_octets", you will need two counter columns. See the ValuesFrom setting below.

           There must be exactly one Type option inside each Result block.

       InstancePrefix prefix
           Prepends prefix to the type instance. If InstancesFrom (see below) is not given, the
           string is simply copied. If InstancesFrom is given, prefix and all strings returned in
           the appropriate columns are concatenated together, separated by dashes ("-").

       InstancesFrom column0 [column1 ...]
           Specifies the columns whose values will be used to create the "type-instance" for each
           row. If you specify more than one column, the value of all columns will be joined
           together with dashes ("-") as separation characters.

           The plugin itself does not check whether or not all built instances are different.
           It's your responsibility to assure that each is unique. This is especially true, if
           you do not specify InstancesFrom: You have to make sure that only one row is returned
           in this case.

           If neither InstancePrefix nor InstancesFrom is given, the type-instance will be empty.

       ValuesFrom column0 [column1 ...]
           Names the columns whose content is used as the actual data for the data sets that are
           dispatched to the daemon. How many such columns you need is determined by the Type
           setting above. If you specify too many or not enough columns, the plugin will complain
           about that and no data will be submitted to the daemon.

           The actual data type in the columns is not that important. The plugin will
           automatically cast the values to the right type if it know how to do that. So it
           should be able to handle integer an floating point types, as well as strings (if they
           include a number at the beginning).

           There must be at least one ValuesFrom option inside each Result block.

       MetadataFrom [column0 column1 ...]
           Names the columns whose content is used as metadata for the data sets that are
           dispatched to the daemon.

           The actual data type in the columns is not that important. The plugin will
           automatically cast the values to the right type if it know how to do that. So it
           should be able to handle integer an floating point types, as well as strings (if they
           include a number at the beginning).

       Database blocks

       Database blocks define a connection to a database and which queries should be sent to that
       database. Since the used "dbi" library can handle a wide variety of databases, the
       configuration is very generic. If in doubt, refer to libdbi's documentation - we stick as
       close to the terminology used there.

       Each database needs a "name" as string argument in the starting tag of the block. This
       name will be used as "PluginInstance" in the values submitted to the daemon. Other than
       that, that name is not used.

       Driver Driver
           Specifies the driver to use to connect to the database. In many cases those drivers
           are named after the database they can connect to, but this is not a technical
           necessity. These drivers are sometimes referred to as "DBD", DataBase Driver, and some
           distributions ship them in separate packages. Drivers for the "dbi" library are
           developed by the libdbi-drivers project at <http://libdbi-drivers.sourceforge.net/>.

           You need to give the driver name as expected by the "dbi" library here. You should be
           able to find that in the documentation for each driver. If you mistype the driver
           name, the plugin will dump a list of all known driver names to the log.

       DriverOption Key Value
           Sets driver-specific options. What option a driver supports can be found in the
           documentation for each driver, somewhere at <http://libdbi-drivers.sourceforge.net/>.
           However, the options "host", "username", "password", and "dbname" seem to be de facto
           standards.

           DBDs can register two types of options: String options and numeric options. The plugin
           will use the "dbi_conn_set_option" function when the configuration provides a string
           and the "dbi_conn_require_option_numeric" function when the configuration provides a
           number. So these two lines will actually result in different calls being used:

             DriverOption "Port" 1234      # numeric
             DriverOption "Port" "1234"    # string

           Unfortunately, drivers are not too keen to report errors when an unknown option is
           passed to them, so invalid settings here may go unnoticed. This is not the plugin's
           fault, it will report errors if it gets them from the library / the driver. If a
           driver complains about an option, the plugin will dump a complete list of all options
           understood by that driver to the log. There is no way to programatically find out if
           an option expects a string or a numeric argument, so you will have to refer to the
           appropriate DBD's documentation to find this out. Sorry.

       SelectDB Database
           In some cases, the database name you connect with is not the database name you want to
           use for querying data. If this option is set, the plugin will "select" (switch to)
           that database after the connection is established.

       Query QueryName
           Associates the query named QueryName with this database connection. The query needs to
           be defined before this statement, i. e. all query blocks you want to refer to must be
           placed above the database block you want to refer to them from.

       Host Hostname
           Sets the host field of value lists to Hostname when dispatching values. Defaults to
           the global hostname setting.

   Plugin "df"
       Device Device
           Select partitions based on the devicename.

       MountPoint Directory
           Select partitions based on the mountpoint.

       FSType FSType
           Select partitions based on the filesystem type.

       IgnoreSelected true|false
           Invert the selection: If set to true, all partitions except the ones that match any
           one of the criteria are collected. By default only selected partitions are collected
           if a selection is made. If no selection is configured at all, all partitions are
           selected.

       ReportByDevice true|false
           Report using the device name rather than the mountpoint. i.e. with this false, (the
           default), it will report a disk as "root", but with it true, it will be "sda1" (or
           whichever).

       ReportInodes true|false
           Enables or disables reporting of free, reserved and used inodes. Defaults to inode
           collection being disabled.

           Enable this option if inodes are a scarce resource for you, usually because many small
           files are stored on the disk. This is a usual scenario for mail transfer agents and
           web caches.

       ValuesAbsolute true|false
           Enables or disables reporting of free and used disk space in 1K-blocks.  Defaults to
           true.

       ValuesPercentage false|true
           Enables or disables reporting of free and used disk space in percentage.  Defaults to
           false.

           This is useful for deploying collectd on the cloud, where machines with different disk
           size may exist. Then it is more practical to configure thresholds based on relative
           disk size.

   Plugin "disk"
       The "disk" plugin collects information about the usage of physical disks and logical disks
       (partitions). Values collected are the number of octets written to and read from a disk or
       partition, the number of read/write operations issued to the disk and a rather complex
       "time" it took for these commands to be issued.

       Using the following two options you can ignore some disks or configure the collection only
       of specific disks.

       Disk Name
           Select the disk Name. Whether it is collected or ignored depends on the IgnoreSelected
           setting, see below. As with other plugins that use the daemon's ignorelist
           functionality, a string that starts and ends with a slash is interpreted as a regular
           expression. Examples:

             Disk "sdd"
             Disk "/hda[34]/"

       IgnoreSelected true|false
           Sets whether selected disks, i. e. the ones matches by any of the Disk statements, are
           ignored or if all other disks are ignored. The behavior (hopefully) is intuitive: If
           no Disk option is configured, all disks are collected. If at least one Disk option is
           given and no IgnoreSelected or set to false, only matching disks will be collected. If
           IgnoreSelected is set to true, all disks are collected except the ones matched.

       UseBSDName true|false
           Whether to use the device's "BSD Name", on Mac OS X, instead of the default
           major/minor numbers. Requires collectd to be built with Apple's IOKitLib support.

       UdevNameAttr Attribute
           Attempt to override disk instance name with the value of a specified udev attribute
           when built with libudev.  If the attribute is not defined for the given device, the
           default name is used. Example:

             UdevNameAttr "DM_NAME"

   Plugin "dns"
       Interface Interface
           The dns plugin uses libpcap to capture dns traffic and analyzes it. This option sets
           the interface that should be used. If this option is not set, or set to "any", the
           plugin will try to get packets from all interfaces. This may not work on certain
           platforms, such as Mac OS X.

       IgnoreSource IP-address
           Ignore packets that originate from this address.

       SelectNumericQueryTypes true|false
           Enabled by default, collects unknown (and thus presented as numeric only) query types.

   Plugin "email"
       SocketFile Path
           Sets the socket-file which is to be created.

       SocketGroup Group
           If running as root change the group of the UNIX-socket after it has been created.
           Defaults to collectd.

       SocketPerms Permissions
           Change the file permissions of the UNIX-socket after it has been created. The
           permissions must be given as a numeric, octal value as you would pass to chmod(1).
           Defaults to 0770.

       MaxConns Number
           Sets the maximum number of connections that can be handled in parallel. Since this
           many threads will be started immediately setting this to a very high value will waste
           valuable resources. Defaults to 5 and will be forced to be at most 16384 to prevent
           typos and dumb mistakes.

   Plugin "ethstat"
       The ethstat plugin collects information about network interface cards (NICs) by talking
       directly with the underlying kernel driver using ioctl(2).

       Synopsis:

        <Plugin "ethstat">
          Interface "eth0"
          Map "rx_csum_offload_errors" "if_rx_errors" "checksum_offload"
          Map "multicast" "if_multicast"
        </Plugin>

       Options:

       Interface Name
           Collect statistical information about interface Name.

       Map Name Type [TypeInstance]
           By default, the plugin will submit values as type "derive" and type instance set to
           Name, the name of the metric as reported by the driver. If an appropriate Map option
           exists, the given Type and, optionally, TypeInstance will be used.

       MappedOnly true|false
           When set to true, only metrics that can be mapped to to a type will be collected, all
           other metrics will be ignored. Defaults to false.

   Plugin "exec"
       Please make sure to read collectd-exec(5) before using this plugin. It contains valuable
       information on when the executable is executed and the output that is expected from it.

       Exec User[:[Group]] Executable [<arg> [<arg> ...]]
       NotificationExec User[:[Group]] Executable [<arg> [<arg> ...]]
           Execute the executable Executable as user User. If the user name is followed by a
           colon and a group name, the effective group is set to that group.  The real group and
           saved-set group will be set to the default group of that user. If no group is given
           the effective group ID will be the same as the real group ID.

           Please note that in order to change the user and/or group the daemon needs superuser
           privileges. If the daemon is run as an unprivileged user you must specify the same
           user/group here. If the daemon is run with superuser privileges, you must supply a
           non-root user here.

           The executable may be followed by optional arguments that are passed to the program.
           Please note that due to the configuration parsing numbers and boolean values may be
           changed. If you want to be absolutely sure that something is passed as-is please
           enclose it in quotes.

           The Exec and NotificationExec statements change the semantics of the programs
           executed, i. e. the data passed to them and the response expected from them. This is
           documented in great detail in collectd-exec(5).

   Plugin "fhcount"
       The "fhcount" plugin provides statistics about used, unused and total number of file
       handles on Linux.

       The fhcount plugin provides the following configuration options:

       ValuesAbsolute true|false
           Enables or disables reporting of file handles usage in absolute numbers, e.g. file
           handles used. Defaults to true.

       ValuesPercentage false|true
           Enables or disables reporting of file handles usage in percentages, e.g.  percent of
           file handles used. Defaults to false.

   Plugin "filecount"
       The "filecount" plugin counts the number of files in a certain directory (and its
       subdirectories) and their combined size. The configuration is very straight forward:

         <Plugin "filecount">
           <Directory "/var/qmail/queue/mess">
             Instance "qmail-message"
           </Directory>
           <Directory "/var/qmail/queue/todo">
             Instance "qmail-todo"
           </Directory>
           <Directory "/var/lib/php5">
             Instance "php5-sessions"
             Name "sess_*"
           </Directory>
         </Plugin>

       The example above counts the number of files in QMail's queue directories and the number
       of PHP5 sessions. Jfiy: The "todo" queue holds the messages that QMail has not yet looked
       at, the "message" queue holds the messages that were classified into "local" and "remote".

       As you can see, the configuration consists of one or more "Directory" blocks, each of
       which specifies a directory in which to count the files. Within those blocks, the
       following options are recognized:

       Instance Instance
           Sets the plugin instance to Instance. That instance name must be unique, but it's your
           responsibility, the plugin doesn't check for that. If not given, the instance is set
           to the directory name with all slashes replaced by underscores and all leading
           underscores removed.

       Name Pattern
           Only count files that match Pattern, where Pattern is a shell-like wildcard as
           understood by fnmatch(3). Only the filename is checked against the pattern, not the
           entire path. In case this makes it easier for you: This option has been named after
           the -name parameter to find(1).

       MTime Age
           Count only files of a specific age: If Age is greater than zero, only files that
           haven't been touched in the last Age seconds are counted. If Age is a negative number,
           this is inversed. For example, if -60 is specified, only files that have been modified
           in the last minute will be counted.

           The number can also be followed by a "multiplier" to easily specify a larger timespan.
           When given in this notation, the argument must in quoted, i. e.  must be passed as
           string. So the -60 could also be written as "-1m" (one minute). Valid multipliers are
           "s" (second), "m" (minute), "h" (hour), "d" (day), "w" (week), and "y" (year). There
           is no "month" multiplier. You can also specify fractional numbers, e. g. "0.5d" is
           identical to "12h".

       Size Size
           Count only files of a specific size. When Size is a positive number, only files that
           are at least this big are counted. If Size is a negative number, this is inversed,
           i. e. only files smaller than the absolute value of Size are counted.

           As with the MTime option, a "multiplier" may be added. For a detailed description see
           above. Valid multipliers here are "b" (byte), "k" (kilobyte), "m" (megabyte), "g"
           (gigabyte), "t" (terabyte), and "p" (petabyte). Please note that there are 1000 bytes
           in a kilobyte, not 1024.

       Recursive true|false
           Controls whether or not to recurse into subdirectories. Enabled by default.

       IncludeHidden true|false
           Controls whether or not to include "hidden" files and directories in the count.
           "Hidden" files and directories are those, whose name begins with a dot.  Defaults to
           false, i.e. by default hidden files and directories are ignored.

   Plugin "GenericJMX"
       The GenericJMX plugin is written in Java and therefore documented in collectd-java(5).

   Plugin "gmond"
       The gmond plugin received the multicast traffic sent by gmond, the statistics collection
       daemon of Ganglia. Mappings for the standard "metrics" are built-in, custom mappings may
       be added via Metric blocks, see below.

       Synopsis:

        <Plugin "gmond">
          MCReceiveFrom "239.2.11.71" "8649"
          <Metric "swap_total">
            Type "swap"
            TypeInstance "total"
            DataSource "value"
          </Metric>
          <Metric "swap_free">
            Type "swap"
            TypeInstance "free"
            DataSource "value"
          </Metric>
        </Plugin>

       The following metrics are built-in:

       ·   load_one, load_five, load_fifteen

       ·   cpu_user, cpu_system, cpu_idle, cpu_nice, cpu_wio

       ·   mem_free, mem_shared, mem_buffers, mem_cached, mem_total

       ·   bytes_in, bytes_out

       ·   pkts_in, pkts_out

       Available configuration options:

       MCReceiveFrom MCGroup [Port]
           Sets sets the multicast group and UDP port to which to subscribe.

           Default: 239.2.11.71 / 8649

       <Metric Name>
           These blocks add a new metric conversion to the internal table. Name, the string
           argument to the Metric block, is the metric name as used by Ganglia.

           Type Type
               Type to map this metric to. Required.

           TypeInstance Instance
               Type-instance to use. Optional.

           DataSource Name
               Data source to map this metric to. If the configured type has exactly one data
               source, this is optional. Otherwise the option is required.

   Plugin "hddtemp"
       To get values from hddtemp collectd connects to localhost (127.0.0.1), port 7634/tcp. The
       Host and Port options can be used to change these default values, see below. "hddtemp" has
       to be running to work correctly. If "hddtemp" is not running timeouts may appear which may
       interfere with other statistics..

       The hddtemp homepage can be found at <http://www.guzu.net/linux/hddtemp.php>.

       Host Hostname
           Hostname to connect to. Defaults to 127.0.0.1.

       Port Port
           TCP-Port to connect to. Defaults to 7634.

   Plugin "interface"
       Interface Interface
           Select this interface. By default these interfaces will then be collected. For a more
           detailed description see IgnoreSelected below.

       IgnoreSelected true|false
           If no configuration if given, the traffic-plugin will collect data from all
           interfaces. This may not be practical, especially for loopback- and similar
           interfaces. Thus, you can use the Interface-option to pick the interfaces you're
           interested in. Sometimes, however, it's easier/preferred to collect all interfaces
           except a few ones. This option enables you to do that: By setting IgnoreSelected to
           true the effect of Interface is inverted: All selected interfaces are ignored and all
           other interfaces are collected.

           It is possible to use regular expressions to match interface names, if the name is
           surrounded by /.../ and collectd was compiled with support for regexps. This is useful
           if there's a need to collect (or ignore) data for a group of interfaces that are
           similarly named, without the need to explicitly list all of them (especially useful if
           the list is dynamic).  Example:

            Interface "lo"
            Interface "/^veth/"
            Interface "/^tun[0-9]+/"
            IgnoreSelected "true"

           This will ignore the loopback interface, all interfaces with names starting with veth
           and all interfaces with names starting with tun followed by at least one digit.

   Plugin "ipmi"
       Sensor Sensor
           Selects sensors to collect or to ignore, depending on IgnoreSelected.

       IgnoreSelected true|false
           If no configuration if given, the ipmi plugin will collect data from all sensors found
           of type "temperature", "voltage", "current" and "fanspeed".  This option enables you
           to do that: By setting IgnoreSelected to true the effect of Sensor is inverted: All
           selected sensors are ignored and all other sensors are collected.

       NotifySensorAdd true|false
           If a sensor appears after initialization time of a minute a notification is sent.

       NotifySensorRemove true|false
           If a sensor disappears a notification is sent.

       NotifySensorNotPresent true|false
           If you have for example dual power supply and one of them is (un)plugged then a
           notification is sent.

   Plugin "iptables"
       Chain Table Chain [Comment|Number [Name]]
       Chain6 Table Chain [Comment|Number [Name]]
           Select the iptables/ip6tables filter rules to count packets and bytes from.

           If only Table and Chain are given, this plugin will collect the counters of all rules
           which have a comment-match. The comment is then used as type-instance.

           If Comment or Number is given, only the rule with the matching comment or the nth rule
           will be collected. Again, the comment (or the number) will be used as the type-
           instance.

           If Name is supplied, it will be used as the type-instance instead of the comment or
           the number.

   Plugin "irq"
       Irq Irq
           Select this irq. By default these irqs will then be collected. For a more detailed
           description see IgnoreSelected below.

       IgnoreSelected true|false
           If no configuration if given, the irq-plugin will collect data from all irqs. This may
           not be practical, especially if no interrupts happen. Thus, you can use the Irq-option
           to pick the interrupt you're interested in.  Sometimes, however, it's easier/preferred
           to collect all interrupts except a few ones. This option enables you to do that: By
           setting IgnoreSelected to true the effect of Irq is inverted: All selected interrupts
           are ignored and all other interrupts are collected.

   Plugin "java"
       The Java plugin makes it possible to write extensions for collectd in Java.  This section
       only discusses the syntax and semantic of the configuration options. For more in-depth
       information on the Java plugin, please read collectd-java(5).

       Synopsis:

        <Plugin "java">
          JVMArg "-verbose:jni"
          JVMArg "-Djava.class.path=/opt/collectd/lib/collectd/bindings/java"
          LoadPlugin "org.collectd.java.Foobar"
          <Plugin "org.collectd.java.Foobar">
            # To be parsed by the plugin
          </Plugin>
        </Plugin>

       Available configuration options:

       JVMArg Argument
           Argument that is to be passed to the Java Virtual Machine (JVM). This works exactly
           the way the arguments to the java binary on the command line work.  Execute
           "java --help" for details.

           Please note that all these options must appear before (i. e. above) any other options!
           When another option is found, the JVM will be started and later options will have to
           be ignored!

       LoadPlugin JavaClass
           Instantiates a new JavaClass object. The constructor of this object very likely then
           registers one or more callback methods with the server.

           See collectd-java(5) for details.

           When the first such option is found, the virtual machine (JVM) is created. This means
           that all JVMArg options must appear before (i. e. above) all LoadPlugin options!

       Plugin Name
           The entire block is passed to the Java plugin as an org.collectd.api.OConfigItem
           object.

           For this to work, the plugin has to register a configuration callback first, see
           "config callback" in collectd-java(5). This means, that the Plugin block must appear
           after the appropriate LoadPlugin block. Also note, that Name depends on the (Java)
           plugin registering the callback and is completely independent from the JavaClass
           argument passed to LoadPlugin.

   Plugin "load"
       The Load plugin collects the system load. These numbers give a rough overview over the
       utilization of a machine. The system load is defined as the number of runnable tasks in
       the run-queue and is provided by many operating systems as a one, five or fifteen minute
       average.

       The following configuration options are available:

       ReportRelative false|true
           When enabled, system load divided by number of available CPU cores is reported for
           intervals 1 min, 5 min and 15 min. Defaults to false.

   Plugin "logfile"
       LogLevel debug|info|notice|warning|err
           Sets the log-level. If, for example, set to notice, then all events with severity
           notice, warning, or err will be written to the logfile.

           Please note that debug is only available if collectd has been compiled with debugging
           support.

       File File
           Sets the file to write log messages to. The special strings stdout and stderr can be
           used to write to the standard output and standard error channels, respectively. This,
           of course, only makes much sense when collectd is running in foreground- or non-
           daemon-mode.

       Timestamp true|false
           Prefix all lines printed by the current time. Defaults to true.

       PrintSeverity true|false
           When enabled, all lines are prefixed by the severity of the log message, for example
           "warning". Defaults to false.

       Note: There is no need to notify the daemon after moving or removing the log file (e. g.
       when rotating the logs). The plugin reopens the file for each line it writes.

   Plugin "log_logstash"
       The log logstash plugin behaves like the logfile plugin but formats messages as JSON
       events for logstash to parse and input.

       LogLevel debug|info|notice|warning|err
           Sets the log-level. If, for example, set to notice, then all events with severity
           notice, warning, or err will be written to the logfile.

           Please note that debug is only available if collectd has been compiled with debugging
           support.

       File File
           Sets the file to write log messages to. The special strings stdout and stderr can be
           used to write to the standard output and standard error channels, respectively. This,
           of course, only makes much sense when collectd is running in foreground- or non-
           daemon-mode.

       Note: There is no need to notify the daemon after moving or removing the log file (e. g.
       when rotating the logs). The plugin reopens the file for each line it writes.

   Plugin "lpar"
       The LPAR plugin reads CPU statistics of Logical Partitions, a virtualization technique for
       IBM POWER processors. It takes into account CPU time stolen from or donated to a
       partition, in addition to the usual user, system, I/O statistics.

       The following configuration options are available:

       CpuPoolStats false|true
           When enabled, statistics about the processor pool are read, too. The partition needs
           to have pool authority in order to be able to acquire this information.  Defaults to
           false.

       ReportBySerial false|true
           If enabled, the serial of the physical machine the partition is currently running on
           is reported as hostname and the logical hostname of the machine is reported in the
           plugin instance. Otherwise, the logical hostname will be used (just like other
           plugins) and the plugin instance will be empty.  Defaults to false.

   Plugin "mbmon"
       The "mbmon plugin" uses mbmon to retrieve temperature, voltage, etc.

       Be default collectd connects to localhost (127.0.0.1), port 411/tcp. The Host and Port
       options can be used to change these values, see below.  "mbmon" has to be running to work
       correctly. If "mbmon" is not running timeouts may appear which may interfere with other
       statistics..

       "mbmon" must be run with the -r option ("print TAG and Value format"); Debian's
       /etc/init.d/mbmon script already does this, other people will need to ensure that this is
       the case.

       Host Hostname
           Hostname to connect to. Defaults to 127.0.0.1.

       Port Port
           TCP-Port to connect to. Defaults to 411.

   Plugin "md"
       The "md plugin" collects information from Linux Software-RAID devices (md).

       All reported values are of the type "md_disks". Reported type instances are active, failed
       (present but not operational), spare (hot stand-by) and missing (physically absent) disks.

       Device Device
           Select md devices based on device name. The device name is the basename of the device,
           i.e. the name of the block device without the leading "/dev/".  See IgnoreSelected for
           more details.

       IgnoreSelected true|false
           Invert device selection: If set to true, all md devices except those listed using
           Device are collected. If false (the default), only those listed are collected. If no
           configuration is given, the md plugin will collect data from all md devices.

   Plugin "memcachec"
       The "memcachec plugin" connects to a memcached server, queries one or more given pages and
       parses the returned data according to user specification.  The matches used are the same
       as the matches used in the "curl" and "tail" plugins.

       In order to talk to the memcached server, this plugin uses the libmemcached library.
       Please note that there is another library with a very similar name, libmemcache (notice
       the missing `d'), which is not applicable.

       Synopsis of the configuration:

        <Plugin "memcachec">
          <Page "plugin_instance">
            Server "localhost"
            Key "page_key"
            <Match>
              Regex "(\\d+) bytes sent"
              DSType CounterAdd
              Type "ipt_octets"
              Instance "type_instance"
            </Match>
          </Page>
        </Plugin>

       The configuration options are:

       <Page Name>
           Each Page block defines one page to be queried from the memcached server.  The block
           requires one string argument which is used as plugin instance.

       Server Address
           Sets the server address to connect to when querying the page. Must be inside a Page
           block.

       Key Key
           When connected to the memcached server, asks for the page Key.

       <Match>
           Match blocks define which strings to look for and how matches substrings are
           interpreted. For a description of match blocks, please see "Plugin tail".

   Plugin "memcached"
       The memcached plugin connects to a memcached server and queries statistics about cache
       utilization, memory and bandwidth used.  <http://www.danga.com/memcached/>

        <Plugin "memcached">
          <Instance "name">
            Host "memcache.example.com"
            Port 11211
          </Instance>
        </Plugin>

       The plugin configuration consists of one or more Instance blocks which specify one
       memcached connection each. Within the Instance blocks, the following options are allowed:

       Host Hostname
           Hostname to connect to. Defaults to 127.0.0.1.

       Port Port
           TCP-Port to connect to. Defaults to 11211.

       Socket Path
           Connect to memcached using the UNIX domain socket at Path. If this setting is given,
           the Host and Port settings are ignored.

   Plugin "mic"
       The mic plugin gathers CPU statistics, memory usage and temperatures from Intel's Many
       Integrated Core (MIC) systems.

       Synopsis:

        <Plugin mic>
          ShowCPU true
          ShowCPUCores true
          ShowMemory true

          ShowTemperatures true
          Temperature vddg
          Temperature vddq
          IgnoreSelectedTemperature true

          ShowPower true
          Power total0
          Power total1
          IgnoreSelectedPower true
        </Plugin>

       The following options are valid inside the Plugin mic block:

       ShowCPU true|false
           If enabled (the default) a sum of the CPU usage across all cores is reported.

       ShowCPUCores true|false
           If enabled (the default) per-core CPU usage is reported.

       ShowMemory true|false
           If enabled (the default) the physical memory usage of the MIC system is reported.

       ShowTemperatures true|false
           If enabled (the default) various temperatures of the MIC system are reported.

       Temperature Name
           This option controls which temperatures are being reported. Whether matching
           temperatures are being ignored or only matching temperatures are reported depends on
           the IgnoreSelectedTemperature setting below. By default all temperatures are reported.

       IgnoreSelectedTemperature false|true
           Controls the behavior of the Temperature setting above. If set to false (the default)
           only temperatures matching a Temperature option are reported or, if no Temperature
           option is specified, all temperatures are reported. If set to true, matching
           temperatures are ignored and all other temperatures are reported.

           Known temperature names are:

           die Die of the CPU

           devmem
               Device Memory

           fin Fan In

           fout
               Fan Out

           vccp
               Voltage ccp

           vddg
               Voltage ddg

           vddq
               Voltage ddq

       ShowPower true|false
           If enabled (the default) various temperatures of the MIC system are reported.

       Power Name
           This option controls which power readings are being reported. Whether matching power
           readings are being ignored or only matching power readings are reported depends on the
           IgnoreSelectedPower setting below. By default all power readings are reported.

       IgnoreSelectedPower false|true
           Controls the behavior of the Power setting above. If set to false (the default) only
           power readings matching a Power option are reported or, if no Power option is
           specified, all power readings are reported. If set to true, matching power readings
           are ignored and all other power readings are reported.

           Known power names are:

           total0
               Total power utilization averaged over Time Window 0 (uWatts).

           total1
               Total power utilization averaged over Time Window 0 (uWatts).

           inst
               Instantaneous power (uWatts).

           imax
               Max instantaneous power (uWatts).

           pcie
               PCI-E connector power (uWatts).

           c2x3
               2x3 connector power (uWatts).

           c2x4
               2x4 connector power (uWatts).

           vccp
               Core rail (uVolts).

           vddg
               Uncore rail (uVolts).

           vddq
               Memory subsystem rail (uVolts).

   Plugin "memory"
       The memory plugin provides the following configuration options:

       ValuesAbsolute true|false
           Enables or disables reporting of physical memory usage in absolute numbers, i.e.
           bytes. Defaults to true.

       ValuesPercentage false|true
           Enables or disables reporting of physical memory usage in percentages, e.g.  percent
           of physical memory used. Defaults to false.

           This is useful for deploying collectd in a heterogeneous environment in which the
           sizes of physical memory vary.

   Plugin "modbus"
       The modbus plugin connects to a Modbus "slave" via Modbus/TCP or Modbus/RTU and reads
       register values. It supports reading single registers (unsigned 16 bit values), large
       integer values (unsigned 32 bit values) and floating point values (two registers
       interpreted as IEEE floats in big endian notation).

       Synopsis:

        <Data "voltage-input-1">
          RegisterBase 0
          RegisterType float
          RegisterCmd ReadHolding
          Type voltage
          Instance "input-1"
        </Data>

        <Data "voltage-input-2">
          RegisterBase 2
          RegisterType float
          RegisterCmd ReadHolding
          Type voltage
          Instance "input-2"
        </Data>

        <Data "supply-temperature-1">
          RegisterBase 0
          RegisterType Int16
          RegisterCmd ReadHolding
          Type temperature
          Instance "temp-1"
        </Data>

        <Host "modbus.example.com">
          Address "192.168.0.42"
          Port    "502"
          Interval 60

          <Slave 1>
            Instance "power-supply"
            Collect  "voltage-input-1"
            Collect  "voltage-input-2"
          </Slave>
        </Host>

        <Host "localhost">
          Device "/dev/ttyUSB0"
          Baudrate 38400
          Interval 20

          <Slave 1>
            Instance "temperature"
            Collect  "supply-temperature-1"
          </Slave>
        </Host>

       <Data Name> blocks
           Data blocks define a mapping between register numbers and the "types" used by
           collectd.

           Within <Data /> blocks, the following options are allowed:

           RegisterBase Number
               Configures the base register to read from the device. If the option RegisterType
               has been set to Uint32 or Float, this and the next register will be read (the
               register number is increased by one).

           RegisterType Int16|Int32|Uint16|Uint32|Float
               Specifies what kind of data is returned by the device. If the type is Int32,
               Uint32 or Float, two 16 bit registers will be read and the data is combined into
               one value. Defaults to Uint16.

           RegisterCmd ReadHolding|ReadInput
               Specifies register type to be collected from device. Works only with libmodbus
               2.9.2 or higher. Defaults to ReadHolding.

           Type Type
               Specifies the "type" (data set) to use when dispatching the value to collectd.
               Currently, only data sets with exactly one data source are supported.

           Instance Instance
               Sets the type instance to use when dispatching the value to collectd. If unset, an
               empty string (no type instance) is used.

       <Host Name> blocks
           Host blocks are used to specify to which hosts to connect and what data to read from
           their "slaves". The string argument Name is used as hostname when dispatching the
           values to collectd.

           Within <Host /> blocks, the following options are allowed:

           Address Hostname
               For Modbus/TCP, specifies the node name (the actual network address) used to
               connect to the host. This may be an IP address or a hostname. Please note that the
               used libmodbus library only supports IPv4 at the moment.

           Port Service
               for Modbus/TCP, specifies the port used to connect to the host. The port can
               either be given as a number or as a service name. Please note that the Service
               argument must be a string, even if ports are given in their numerical form.
               Defaults to "502".

           Device Devicenode
               For Modbus/RTU, specifies the path to the serial device being used.

           Baudrate Baudrate
               For Modbus/RTU, specifies the baud rate of the serial device.  Note, connections
               currently support only 8/N/1.

           Interval Interval
               Sets the interval (in seconds) in which the values will be collected from this
               host. By default the global Interval setting will be used.

           <Slave ID>
               Over each connection, multiple Modbus devices may be reached. The slave ID is used
               to specify which device should be addressed. For each device you want to query,
               one Slave block must be given.

               Within <Slave /> blocks, the following options are allowed:

               Instance Instance
                   Specify the plugin instance to use when dispatching the values to collectd.
                   By default "slave_ID" is used.

               Collect DataName
                   Specifies which data to retrieve from the device. DataName must be the same
                   string as the Name argument passed to a Data block. You can specify this
                   option multiple times to collect more than one value from a slave. At least
                   one Collect option is mandatory.

   Plugin "mysql"
       The "mysql plugin" requires mysqlclient to be installed. It connects to one or more
       databases when started and keeps the connection up as long as possible. When the
       connection is interrupted for whatever reason it will try to re-connect. The plugin will
       complain loudly in case anything goes wrong.

       This plugin issues the MySQL "SHOW STATUS" / "SHOW GLOBAL STATUS" command and collects
       information about MySQL network traffic, executed statements, requests, the query cache
       and threads by evaluating the "Bytes_{received,sent}", "Com_*", "Handler_*", "Qcache_*"
       and "Threads_*" return values. Please refer to the MySQL reference manual, 5.1.6. Server
       Status Variables for an explanation of these values.

       Optionally, master and slave statistics may be collected in a MySQL replication setup. In
       that case, information about the synchronization state of the nodes are collected by
       evaluating the "Position" return value of the "SHOW MASTER STATUS" command and the
       "Seconds_Behind_Master", "Read_Master_Log_Pos" and "Exec_Master_Log_Pos" return values of
       the "SHOW SLAVE STATUS" command. See the MySQL reference manual, 12.5.5.21 SHOW MASTER
       STATUS Syntax and 12.5.5.31 SHOW SLAVE STATUS Syntax for details.

       Synopsis:

         <Plugin mysql>
           <Database foo>
             Host "hostname"
             User "username"
             Password "password"
             Port "3306"
             MasterStats true
             ConnectTimeout 10
           </Database>

           <Database bar>
             Alias "squeeze"
             Host "localhost"
             Socket "/var/run/mysql/mysqld.sock"
             SlaveStats true
             SlaveNotifications true
           </Database>
         </Plugin>

       A Database block defines one connection to a MySQL database. It accepts a single argument
       which specifies the name of the database. None of the other options are required. MySQL
       will use default values as documented in the section "mysql_real_connect()" in the MySQL
       reference manual.

       Alias Alias
           Alias to use as sender instead of hostname when reporting. This may be useful when
           having cryptic hostnames.

       Host Hostname
           Hostname of the database server. Defaults to localhost.

       User Username
           Username to use when connecting to the database. The user does not have to be granted
           any privileges (which is synonym to granting the "USAGE" privilege), unless you want
           to collectd replication statistics (see MasterStats and SlaveStats below). In this
           case, the user needs the "REPLICATION CLIENT" (or "SUPER") privileges. Else, any
           existing MySQL user will do.

       Password Password
           Password needed to log into the database.

       Database Database
           Select this database. Defaults to no database which is a perfectly reasonable option
           for what this plugin does.

       Port Port
           TCP-port to connect to. The port must be specified in its numeric form, but it must be
           passed as a string nonetheless. For example:

             Port "3306"

           If Host is set to localhost (the default), this setting has no effect.  See the
           documentation for the "mysql_real_connect" function for details.

       Socket Socket
           Specifies the path to the UNIX domain socket of the MySQL server. This option only has
           any effect, if Host is set to localhost (the default).  Otherwise, use the Port option
           above. See the documentation for the "mysql_real_connect" function for details.

       InnodbStats true|false
           If enabled, metrics about the InnoDB storage engine are collected.  Disabled by
           default.

       MasterStats true|false
       SlaveStats true|false
           Enable the collection of master / slave statistics in a replication setup. In order to
           be able to get access to these statistics, the user needs special privileges. See the
           User documentation above. Defaults to false.

       SlaveNotifications true|false
           If enabled, the plugin sends a notification if the replication slave I/O and / or SQL
           threads are not running. Defaults to false.

       ConnectTimeout Seconds
           Sets the connect timeout for the MySQL client.

   Plugin "netapp"
       The netapp plugin can collect various performance and capacity information from a NetApp
       filer using the NetApp API.

       Please note that NetApp has a wide line of products and a lot of different software
       versions for each of these products. This plugin was developed for a NetApp FAS3040
       running OnTap 7.2.3P8 and tested on FAS2050 7.3.1.1L1, FAS3140 7.2.5.1 and FAS3020
       7.2.4P9. It should work for most combinations of model and software version but it is very
       hard to test this.  If you have used this plugin with other models and/or software
       version, feel free to send us a mail to tell us about the results, even if it's just a
       short "It works".

       To collect these data collectd will log in to the NetApp via HTTP(S) and HTTP basic
       authentication.

       Do not use a regular user for this! Create a special collectd user with just the minimum
       of capabilities needed. The user only needs the "login-http-admin" capability as well as a
       few more depending on which data will be collected.  Required capabilities are documented
       below.

       Synopsis

        <Plugin "netapp">
          <Host "netapp1.example.com">
           Protocol      "https"
           Address       "10.0.0.1"
           Port          443
           User          "username"
           Password      "aef4Aebe"
           Interval      30

           <WAFL>
             Interval 30
             GetNameCache   true
             GetDirCache    true
             GetBufferCache true
             GetInodeCache  true
           </WAFL>

           <Disks>
             Interval 30
             GetBusy true
           </Disks>

           <VolumePerf>
             Interval 30
             GetIO      "volume0"
             IgnoreSelectedIO      false
             GetOps     "volume0"
             IgnoreSelectedOps     false
             GetLatency "volume0"
             IgnoreSelectedLatency false
           </VolumePerf>

           <VolumeUsage>
             Interval 30
             GetCapacity "vol0"
             GetCapacity "vol1"
             IgnoreSelectedCapacity false
             GetSnapshot "vol1"
             GetSnapshot "vol3"
             IgnoreSelectedSnapshot false
           </VolumeUsage>

           <Quota>
             Interval 60
           </Quota>

           <Snapvault>
             Interval 30
           </Snapvault>

           <System>
             Interval 30
             GetCPULoad     true
             GetInterfaces  true
             GetDiskOps     true
             GetDiskIO      true
           </System>

           <VFiler vfilerA>
             Interval 60

             SnapVault true
             # ...
           </VFiler>
          </Host>
        </Plugin>

       The netapp plugin accepts the following configuration options:

       Host Name
           A host block defines one NetApp filer. It will appear in collectd with the name you
           specify here which does not have to be its real name nor its hostname (see the Address
           option below).

       VFiler Name
           A VFiler block may only be used inside a host block. It accepts all the same options
           as the Host block (except for cascaded VFiler blocks) and will execute all NetApp API
           commands in the context of the specified VFiler(R). It will appear in collectd with
           the name you specify here which does not have to be its real name. The VFiler name may
           be specified using the VFilerName option. If this is not specified, it will default to
           the name you specify here.

           The VFiler block inherits all connection related settings from the surrounding Host
           block (which appear before the VFiler block) but they may be overwritten inside the
           VFiler block.

           This feature is useful, for example, when using a VFiler as SnapVault target
           (supported since OnTap 8.1). In that case, the SnapVault statistics are not available
           in the host filer (vfiler0) but only in the respective VFiler context.

       Protocol httpd|http
           The protocol collectd will use to query this host.

           Optional

           Type: string

           Default: https

           Valid options: http, https

       Address Address
           The hostname or IP address of the host.

           Optional

           Type: string

           Default: The "host" block's name.

       Port Port
           The TCP port to connect to on the host.

           Optional

           Type: integer

           Default: 80 for protocol "http", 443 for protocol "https"

       User User
       Password Password
           The username and password to use to login to the NetApp.

           Mandatory

           Type: string

       VFilerName Name
           The name of the VFiler in which context to execute API commands. If not specified, the
           name provided to the VFiler block will be used instead.

           Optional

           Type: string

           Default: name of the VFiler block

           Note: This option may only be used inside VFiler blocks.

       Interval Interval
           TODO

       The following options decide what kind of data will be collected. You can either use them
       as a block and fine tune various parameters inside this block, use them as a single
       statement to just accept all default values, or omit it to not collect any data.

       The following options are valid inside all blocks:

       Interval Seconds
           Collect the respective statistics every Seconds seconds. Defaults to the host specific
           setting.

       The System block

       This will collect various performance data about the whole system.

       Note: To get this data the collectd user needs the "api-perf-object-get-instances"
       capability.

       Interval Seconds
           Collect disk statistics every Seconds seconds.

       GetCPULoad true|false
           If you set this option to true the current CPU usage will be read. This will be the
           average usage between all CPUs in your NetApp without any information about individual
           CPUs.

           Note: These are the same values that the NetApp CLI command "sysstat" returns in the
           "CPU" field.

           Optional

           Type: boolean

           Default: true

           Result: Two value lists of type "cpu", and type instances "idle" and "system".

       GetInterfaces true|false
           If you set this option to true the current traffic of the network interfaces will be
           read. This will be the total traffic over all interfaces of your NetApp without any
           information about individual interfaces.

           Note: This is the same values that the NetApp CLI command "sysstat" returns in the
           "Net kB/s" field.

           Or is it?

           Optional

           Type: boolean

           Default: true

           Result: One value list of type "if_octects".

       GetDiskIO true|false
           If you set this option to true the current IO throughput will be read. This will be
           the total IO of your NetApp without any information about individual disks, volumes or
           aggregates.

           Note: This is the same values that the NetApp CLI command "sysstat" returns in the
           "Disk kB/s" field.

           Optional

           Type: boolean

           Default: true

           Result: One value list of type "disk_octets".

       GetDiskOps true|false
           If you set this option to true the current number of HTTP, NFS, CIFS, FCP, iSCSI, etc.
           operations will be read. This will be the total number of operations on your NetApp
           without any information about individual volumes or aggregates.

           Note: These are the same values that the NetApp CLI command "sysstat" returns in the
           "NFS", "CIFS", "HTTP", "FCP" and "iSCSI" fields.

           Optional

           Type: boolean

           Default: true

           Result: A variable number of value lists of type "disk_ops_complex". Each type of
           operation will result in one value list with the name of the operation as type
           instance.

       The WAFL block

       This will collect various performance data about the WAFL file system. At the moment this
       just means cache performance.

       Note: To get this data the collectd user needs the "api-perf-object-get-instances"
       capability.

       Note: The interface to get these values is classified as "Diagnostics" by NetApp. This
       means that it is not guaranteed to be stable even between minor releases.

       Interval Seconds
           Collect disk statistics every Seconds seconds.

       GetNameCache true|false
           Optional

           Type: boolean

           Default: true

           Result: One value list of type "cache_ratio" and type instance "name_cache_hit".

       GetDirCache true|false
           Optional

           Type: boolean

           Default: true

           Result: One value list of type "cache_ratio" and type instance "find_dir_hit".

       GetInodeCache true|false
           Optional

           Type: boolean

           Default: true

           Result: One value list of type "cache_ratio" and type instance "inode_cache_hit".

       GetBufferCache true|false
           Note: This is the same value that the NetApp CLI command "sysstat" returns in the
           "Cache hit" field.

           Optional

           Type: boolean

           Default: true

           Result: One value list of type "cache_ratio" and type instance "buf_hash_hit".

       The Disks block

       This will collect performance data about the individual disks in the NetApp.

       Note: To get this data the collectd user needs the "api-perf-object-get-instances"
       capability.

       Interval Seconds
           Collect disk statistics every Seconds seconds.

       GetBusy true|false
           If you set this option to true the busy time of all disks will be calculated and the
           value of the busiest disk in the system will be written.

           Note: This is the same values that the NetApp CLI command "sysstat" returns in the
           "Disk util" field. Probably.

           Optional

           Type: boolean

           Default: true

           Result: One value list of type "percent" and type instance "disk_busy".

       The VolumePerf block

       This will collect various performance data about the individual volumes.

       You can select which data to collect about which volume using the following options. They
       follow the standard ignorelist semantic.

       Note: To get this data the collectd user needs the api-perf-object-get-instances
       capability.

       Interval Seconds
           Collect volume performance data every Seconds seconds.

       GetIO Volume
       GetOps Volume
       GetLatency Volume
           Select the given volume for IO, operations or latency statistics collection.  The
           argument is the name of the volume without the "/vol/" prefix.

           Since the standard ignorelist functionality is used here, you can use a string
           starting and ending with a slash to specify regular expression matching: To match the
           volumes "vol0", "vol2" and "vol7", you can use this regular expression:

             GetIO "/^vol[027]$/"

           If no regular expression is specified, an exact match is required. Both, regular and
           exact matching are case sensitive.

           If no volume was specified at all for either of the three options, that data will be
           collected for all available volumes.

       IgnoreSelectedIO true|false
       IgnoreSelectedOps true|false
       IgnoreSelectedLatency true|false
           When set to true, the volumes selected for IO, operations or latency statistics
           collection will be ignored and the data will be collected for all other volumes.

           When set to false, data will only be collected for the specified volumes and all other
           volumes will be ignored.

           If no volumes have been specified with the above Get* options, all volumes will be
           collected regardless of the IgnoreSelected* option.

           Defaults to false

       The VolumeUsage block

       This will collect capacity data about the individual volumes.

       Note: To get this data the collectd user needs the api-volume-list-info capability.

       Interval Seconds
           Collect volume usage statistics every Seconds seconds.

       GetCapacity VolumeName
           The current capacity of the volume will be collected. This will result in two to four
           value lists, depending on the configuration of the volume. All data sources are of
           type "df_complex" with the name of the volume as plugin_instance.

           There will be type_instances "used" and "free" for the number of used and available
           bytes on the volume.  If the volume has some space reserved for snapshots, a
           type_instance "snap_reserved" will be available.  If the volume has SIS enabled, a
           type_instance "sis_saved" will be available. This is the number of bytes saved by the
           SIS feature.

           Note: The current NetApp API has a bug that results in this value being reported as a
           32 bit number. This plugin tries to guess the correct number which works most of the
           time.  If you see strange values here, bug NetApp support to fix this.

           Repeat this option to specify multiple volumes.

       IgnoreSelectedCapacity true|false
           Specify whether to collect only the volumes selected by the GetCapacity option or to
           ignore those volumes. IgnoreSelectedCapacity defaults to false. However, if no
           GetCapacity option is specified at all, all capacities will be selected anyway.

       GetSnapshot VolumeName
           Select volumes from which to collect snapshot information.

           Usually, the space used for snapshots is included in the space reported as "used". If
           snapshot information is collected as well, the space used for snapshots is subtracted
           from the used space.

           To make things even more interesting, it is possible to reserve space to be used for
           snapshots. If the space required for snapshots is less than that reserved space, there
           is "reserved free" and "reserved used" space in addition to "free" and "used". If the
           space required for snapshots exceeds the reserved space, that part allocated in the
           normal space is subtracted from the "used" space again.

           Repeat this option to specify multiple volumes.

       IgnoreSelectedSnapshot
           Specify whether to collect only the volumes selected by the GetSnapshot option or to
           ignore those volumes. IgnoreSelectedSnapshot defaults to false. However, if no
           GetSnapshot option is specified at all, all capacities will be selected anyway.

       The Quota block

       This will collect (tree) quota statistics (used disk space and number of used files). This
       mechanism is useful to get usage information for single qtrees.  In case the quotas are
       not used for any other purpose, an entry similar to the following in "/etc/quotas" would
       be sufficient:

         /vol/volA/some_qtree tree - - - - -

       After adding the entry, issue "quota on -w volA" on the NetApp filer.

       Interval Seconds
           Collect SnapVault(R) statistics every Seconds seconds.

       The SnapVault block

       This will collect statistics about the time and traffic of SnapVault(R) transfers.

       Interval Seconds
           Collect SnapVault(R) statistics every Seconds seconds.

   Plugin "netlink"
       The "netlink" plugin uses a netlink socket to query the Linux kernel about statistics of
       various interface and routing aspects.

       Interface Interface
       VerboseInterface Interface
           Instruct the plugin to collect interface statistics. This is basically the same as the
           statistics provided by the "interface" plugin (see above) but potentially much more
           detailed.

           When configuring with Interface only the basic statistics will be collected, namely
           octets, packets, and errors. These statistics are collected by the "interface" plugin,
           too, so using both at the same time is no benefit.

           When configured with VerboseInterface all counters except the basic ones, so that no
           data needs to be collected twice if you use the "interface" plugin.  This includes
           dropped packets, received multicast packets, collisions and a whole zoo of
           differentiated RX and TX errors. You can try the following command to get an idea of
           what awaits you:

             ip -s -s link list

           If Interface is All, all interfaces will be selected.

       QDisc Interface [QDisc]
       Class Interface [Class]
       Filter Interface [Filter]
           Collect the octets and packets that pass a certain qdisc, class or filter.

           QDiscs and classes are identified by their type and handle (or classid).  Filters
           don't necessarily have a handle, therefore the parent's handle is used.  The notation
           used in collectd differs from that used in tc(1) in that it doesn't skip the major or
           minor number if it's zero and doesn't print special ids by their name. So, for
           example, a qdisc may be identified by "pfifo_fast-1:0" even though the minor number of
           all qdiscs is zero and thus not displayed by tc(1).

           If QDisc, Class, or Filter is given without the second argument, i. .e. without an
           identifier, all qdiscs, classes, or filters that are associated with that interface
           will be collected.

           Since a filter itself doesn't necessarily have a handle, the parent's handle is used.
           This may lead to problems when more than one filter is attached to a qdisc or class.
           This isn't nice, but we don't know how this could be done any better. If you have a
           idea, please don't hesitate to tell us.

           As with the Interface option you can specify All as the interface, meaning all
           interfaces.

           Here are some examples to help you understand the above text more easily:

             <Plugin netlink>
               VerboseInterface "All"
               QDisc "eth0" "pfifo_fast-1:0"
               QDisc "ppp0"
               Class "ppp0" "htb-1:10"
               Filter "ppp0" "u32-1:0"
             </Plugin>

       IgnoreSelected
           The behavior is the same as with all other similar plugins: If nothing is selected at
           all, everything is collected. If some things are selected using the options described
           above, only these statistics are collected. If you set IgnoreSelected to true, this
           behavior is inverted, i. e. the specified statistics will not be collected.

   Plugin "network"
       The Network plugin sends data to a remote instance of collectd, receives data from a
       remote instance, or both at the same time. Data which has been received from the network
       is usually not transmitted again, but this can be activated, see the Forward option below.

       The default IPv6 multicast group is "ff18::efc0:4a42". The default IPv4 multicast group is
       239.192.74.66. The default UDP port is 25826.

       Both, Server and Listen can be used as single option or as block. When used as block,
       given options are valid for this socket only. The following example will export the
       metrics twice: Once to an "internal" server (without encryption and signing) and one to an
       external server (with cryptographic signature):

        <Plugin "network">
          # Export to an internal server
          # (demonstrates usage without additional options)
          Server "collectd.internal.tld"

          # Export to an external server
          # (demonstrates usage with signature options)
          <Server "collectd.external.tld">
            SecurityLevel "sign"
            Username "myhostname"
            Password "ohl0eQue"
          </Server>
        </Plugin>

       <Server Host [Port]>
           The Server statement/block sets the server to send datagrams to. The statement may
           occur multiple times to send each datagram to multiple destinations.

           The argument Host may be a hostname, an IPv4 address or an IPv6 address. The optional
           second argument specifies a port number or a service name. If not given, the default,
           25826, is used.

           The following options are recognized within Server blocks:

           SecurityLevel Encrypt|Sign|None
               Set the security you require for network communication. When the security level
               has been set to Encrypt, data sent over the network will be encrypted using
               AES-256. The integrity of encrypted packets is ensured using SHA-1. When set to
               Sign, transmitted data is signed using the HMAC-SHA-256 message authentication
               code. When set to None, data is sent without any security.

               This feature is only available if the network plugin was linked with libgcrypt.

           Username Username
               Sets the username to transmit. This is used by the server to lookup the password.
               See AuthFile below. All security levels except None require this setting.

               This feature is only available if the network plugin was linked with libgcrypt.

           Password Password
               Sets a password (shared secret) for this socket. All security levels except None
               require this setting.

               This feature is only available if the network plugin was linked with libgcrypt.

           Interface Interface name
               Set the outgoing interface for IP packets. This applies at least to IPv6 packets
               and if possible to IPv4. If this option is not applicable, undefined or a non-
               existent interface name is specified, the default behavior is to let the kernel
               choose the appropriate interface. Be warned that the manual selection of an
               interface for unicast traffic is only necessary in rare cases.

           ResolveInterval Seconds
               Sets the interval at which to re-resolve the DNS for the Host. This is useful to
               force a regular DNS lookup to support a high availability setup. If not specified,
               re-resolves are never attempted.

       <Listen Host [Port]>
           The Listen statement sets the interfaces to bind to. When multiple statements are
           found the daemon will bind to multiple interfaces.

           The argument Host may be a hostname, an IPv4 address or an IPv6 address. If the
           argument is a multicast address the daemon will join that multicast group.  The
           optional second argument specifies a port number or a service name. If not given, the
           default, 25826, is used.

           The following options are recognized within "<Listen>" blocks:

           SecurityLevel Encrypt|Sign|None
               Set the security you require for network communication. When the security level
               has been set to Encrypt, only encrypted data will be accepted. The integrity of
               encrypted packets is ensured using SHA-1. When set to Sign, only signed and
               encrypted data is accepted. When set to None, all data will be accepted. If an
               AuthFile option was given (see below), encrypted data is decrypted if possible.

               This feature is only available if the network plugin was linked with libgcrypt.

           AuthFile Filename
               Sets a file in which usernames are mapped to passwords. These passwords are used
               to verify signatures and to decrypt encrypted network packets. If SecurityLevel is
               set to None, this is optional. If given, signed data is verified and encrypted
               packets are decrypted. Otherwise, signed data is accepted without checking the
               signature and encrypted data cannot be decrypted.  For the other security levels
               this option is mandatory.

               The file format is very simple: Each line consists of a username followed by a
               colon and any number of spaces followed by the password. To demonstrate, an
               example file could look like this:

                 user0: foo
                 user1: bar

               Each time a packet is received, the modification time of the file is checked using
               stat(2). If the file has been changed, the contents is re-read. While the file is
               being read, it is locked using fcntl(2).

           Interface Interface name
               Set the incoming interface for IP packets explicitly. This applies at least to
               IPv6 packets and if possible to IPv4. If this option is not applicable, undefined
               or a non-existent interface name is specified, the default behavior is, to let the
               kernel choose the appropriate interface. Thus incoming traffic gets only accepted,
               if it arrives on the given interface.

       TimeToLive 1-255
           Set the time-to-live of sent packets. This applies to all, unicast and multicast, and
           IPv4 and IPv6 packets. The default is to not change this value.  That means that
           multicast packets will be sent with a TTL of 1 (one) on most operating systems.

       MaxPacketSize 1024-65535
           Set the maximum size for datagrams received over the network. Packets larger than this
           will be truncated. Defaults to 1452 bytes, which is the maximum payload size that can
           be transmitted in one Ethernet frame using IPv6 / UDP.

           On the server side, this limit should be set to the largest value used on any client.
           Likewise, the value on the client must not be larger than the value on the server, or
           data will be lost.

           Compatibility: Versions prior to version 4.8 used a fixed sized buffer of 1024 bytes.
           Versions 4.8, 4.9 and 4.10 used a default value of 1024 bytes to avoid problems when
           sending data to an older server.

       Forward true|false
           If set to true, write packets that were received via the network plugin to the sending
           sockets. This should only be activated when the Listen- and Server-statements differ.
           Otherwise packets may be send multiple times to the same multicast group. While this
           results in more network traffic than necessary it's not a huge problem since the
           plugin has a duplicate detection, so the values will not loop.

       ReportStats true|false
           The network plugin cannot only receive and send statistics, it can also create
           statistics about itself. Collected data included the number of received and sent
           octets and packets, the length of the receive queue and the number of values handled.
           When set to true, the Network plugin will make these statistics available. Defaults to
           false.

   Plugin "nginx"
       This plugin collects the number of connections and requests handled by the "nginx daemon"
       (speak: engine X), a HTTP and mail server/proxy. It queries the page provided by the
       "ngx_http_stub_status_module" module, which isn't compiled by default. Please refer to
       <http://wiki.codemongers.com/NginxStubStatusModule> for more information on how to compile
       and configure nginx and this module.

       The following options are accepted by the "nginx plugin":

       URL http://host/nginx_status
           Sets the URL of the "ngx_http_stub_status_module" output.

       User Username
           Optional user name needed for authentication.

       Password Password
           Optional password needed for authentication.

       VerifyPeer true|false
           Enable or disable peer SSL certificate verification. See
           <http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by default.

       VerifyHost true|false
           Enable or disable peer host name verification. If enabled, the plugin checks if the
           "Common Name" or a "Subject Alternate Name" field of the SSL certificate matches the
           host name provided by the URL option. If this identity check fails, the connection is
           aborted. Obviously, only works when connecting to a SSL enabled server. Enabled by
           default.

       CACert File
           File that holds one or more SSL certificates. If you want to use HTTPS you will
           possibly need this option. What CA certificates come bundled with "libcurl" and are
           checked by default depends on the distribution you use.

       Timeout Milliseconds
           The Timeout option sets the overall timeout for HTTP requests to URL, in milliseconds.
           By default, the configured Interval is used to set the timeout.

   Plugin "notify_desktop"
       This plugin sends a desktop notification to a notification daemon, as defined in the
       Desktop Notification Specification. To actually display the notifications, notification-
       daemon is required and collectd has to be able to access the X server (i. e., the
       "DISPLAY" and "XAUTHORITY" environment variables have to be set correctly) and the D-Bus
       message bus.

       The Desktop Notification Specification can be found at
       <http://www.galago-project.org/specs/notification/>.

       OkayTimeout timeout
       WarningTimeout timeout
       FailureTimeout timeout
           Set the timeout, in milliseconds, after which to expire the notification for "OKAY",
           "WARNING" and "FAILURE" severities respectively. If zero has been specified, the
           displayed notification will not be closed at all - the user has to do so herself.
           These options default to 5000. If a negative number has been specified, the default is
           used as well.

   Plugin "notify_email"
       The notify_email plugin uses the ESMTP library to send notifications to a configured email
       address.

       libESMTP is available from <http://www.stafford.uklinux.net/libesmtp/>.

       Available configuration options:

       From Address
           Email address from which the emails should appear to come from.

           Default: "root@localhost"

       Recipient Address
           Configures the email address(es) to which the notifications should be mailed.  May be
           repeated to send notifications to multiple addresses.

           At least one Recipient must be present for the plugin to work correctly.

       SMTPServer Hostname
           Hostname of the SMTP server to connect to.

           Default: "localhost"

       SMTPPort Port
           TCP port to connect to.

           Default: 25

       SMTPUser Username
           Username for ASMTP authentication. Optional.

       SMTPPassword Password
           Password for ASMTP authentication. Optional.

       Subject Subject
           Subject-template to use when sending emails. There must be exactly two string-
           placeholders in the subject, given in the standard printf(3) syntax, i. e. %s. The
           first will be replaced with the severity, the second with the hostname.

           Default: "Collectd notify: %s@%s"

   Plugin "ntpd"
       The "ntpd" plugin collects per-peer ntpd data such as time offset and time dispersion.

       For talking to ntpd, it mimics what the ntpdc control program does on wire - using mode 7
       specific requests. This mode is deprecated with newer ntpd releases (4.2.7p230 and later).
       For the "ntpd" plugin to work correctly with them, the ntp daemon must be explicitly
       configured to enable mode 7 (which is disabled by default). Refer to the ntp.conf(5)
       manual page for details.

       Available configuration options for the "ntpd" plugin:

       Host Hostname
           Hostname of the host running ntpd. Defaults to localhost.

       Port Port
           UDP-Port to connect to. Defaults to 123.

       ReverseLookups true|false
           Sets whether or not to perform reverse lookups on peers. Since the name or IP-address
           may be used in a filename it is recommended to disable reverse lookups. The default is
           to do reverse lookups to preserve backwards compatibility, though.

       IncludeUnitID true|false
           When a peer is a refclock, include the unit ID in the type instance.  Defaults to
           false for backward compatibility.

           If two refclock peers use the same driver and this is false, the plugin will try to
           write simultaneous measurements from both to the same type instance.  This will result
           in error messages in the log and only one set of measurements making it through.

   Plugin "nut"
       UPS upsname@hostname[:port]
           Add a UPS to collect data from. The format is identical to the one accepted by
           upsc(8).

   Plugin "olsrd"
       The olsrd plugin connects to the TCP port opened by the txtinfo plugin of the Optimized
       Link State Routing daemon and reads information about the current state of the meshed
       network.

       The following configuration options are understood:

       Host Host
           Connect to Host. Defaults to "localhost".

       Port Port
           Specifies the port to connect to. This must be a string, even if you give the port as
           a number rather than a service name. Defaults to "2006".

       CollectLinks No|Summary|Detail
           Specifies what information to collect about links, i. e. direct connections of the
           daemon queried. If set to No, no information is collected. If set to Summary, the
           number of links and the average of all link quality (LQ) and neighbor link quality
           (NLQ) values is calculated.  If set to Detail LQ and NLQ are collected per link.

           Defaults to Detail.

       CollectRoutes No|Summary|Detail
           Specifies what information to collect about routes of the daemon queried. If set to
           No, no information is collected. If set to Summary, the number of routes and the
           average metric and ETX is calculated. If set to Detail metric and ETX are collected
           per route.

           Defaults to Summary.

       CollectTopology No|Summary|Detail
           Specifies what information to collect about the global topology. If set to No, no
           information is collected. If set to Summary, the number of links in the entire
           topology and the average link quality (LQ) is calculated.  If set to Detail LQ and NLQ
           are collected for each link in the entire topology.

           Defaults to Summary.

   Plugin "onewire"
       EXPERIMENTAL! See notes below.

       The "onewire" plugin uses the owcapi library from the owfs project <http://owfs.org/> to
       read sensors connected via the onewire bus.

       It can be used in two possible modes - standard or advanced.

       In the standard mode only temperature sensors (sensors with the family code 10, 22 and 28
       - e.g. DS1820, DS18S20, DS1920) can be read. If you have other sensors you would like to
       have included, please send a sort request to the mailing list. You can select sensors to
       be read or to be ignored depending on the option IgnoreSelected). When no list is provided
       the whole bus is walked and all sensors are read.

       Hubs (the DS2409 chips) are working, but read the note, why this plugin is experimental,
       below.

       In the advanced mode you can configure any sensor to be read (only numerical value) using
       full OWFS path (e.g. "/uncached/10.F10FCA000800/temperature").  In this mode you have to
       list all the sensors. Neither default bus walk nor IgnoreSelected are used here. Address
       and type (file) is extracted from the path automatically and should produce compatible
       structure with the "standard" mode (basically the path is expected as for example
       "/uncached/10.F10FCA000800/temperature" where it would extract address part "F10FCA000800"
       and the rest after the slash is considered the type - here "temperature").  There are two
       advantages to this mode - you can access virtually any sensor (not just temperature),
       select whether to use cached or directly read values and it is slighlty faster. The
       downside is more complex configuration.

       The two modes are distinguished automatically by the format of the address.  It is not
       possible to mix the two modes. Once a full path is detected in any Sensor then the whole
       addressing (all sensors) is considered to be this way (and as standard addresses will fail
       parsing they will be ignored).

       Device Device
           Sets the device to read the values from. This can either be a "real" hardware device,
           such as a serial port or an USB port, or the address of the owserver(1) socket,
           usually localhost:4304.

           Though the documentation claims to automatically recognize the given address format,
           with version 2.7p4 we had to specify the type explicitly. So with that version, the
           following configuration worked for us:

             <Plugin onewire>
               Device "-s localhost:4304"
             </Plugin>

           This directive is required and does not have a default value.

       Sensor Sensor
           In the standard mode selects sensors to collect or to ignore (depending on
           IgnoreSelected, see below). Sensors are specified without the family byte at the
           beginning, so you have to use for example "F10FCA000800", and not include the leading
           10. family byte and point.  When no Sensor is configured the whole Onewire bus is
           walked and all supported sensors (see above) are read.

           In the advanced mode the Sensor specifies full OWFS path - e.g.
           "/uncached/10.F10FCA000800/temperature" (or when cached values are OK
           "/10.F10FCA000800/temperature"). IgnoreSelected is not used.

           As there can be multiple devices on the bus you can list multiple sensor (use multiple
           Sensor elements).

       IgnoreSelected true|false
           If no configuration is given, the onewire plugin will collect data from all sensors
           found. This may not be practical, especially if sensors are added and removed
           regularly. Sometimes, however, it's easier/preferred to collect only specific sensors
           or all sensors except a few specified ones. This option enables you to do that: By
           setting IgnoreSelected to true the effect of Sensor is inverted: All selected
           interfaces are ignored and all other interfaces are collected.

           Used only in the standard mode - see above.

       Interval Seconds
           Sets the interval in which all sensors should be read. If not specified, the global
           Interval setting is used.

       EXPERIMENTAL! The "onewire" plugin is experimental, because it doesn't yet work with big
       setups. It works with one sensor being attached to one controller, but as soon as you
       throw in a couple more senors and maybe a hub or two, reading all values will take more
       than ten seconds (the default interval). We will probably add some separate thread for
       reading the sensors and some cache or something like that, but it's not done yet. We will
       try to maintain backwards compatibility in the future, but we can't promise. So in short:
       If it works for you: Great! But keep in mind that the config might change, though this is
       unlikely. Oh, and if you want to help improving this plugin, just send a short notice to
       the mailing list. Thanks :)

   Plugin "openldap"
       To use the "openldap" plugin you first need to configure the OpenLDAP server correctly.
       The backend database "monitor" needs to be loaded and working. See slapd-monitor(5) for
       the details.

       The configuration of the "openldap" plugin consists of one or more Instance blocks. Each
       block requires one string argument as the instance name. For example:

        <Plugin "openldap">
          <Instance "foo">
            URL "ldap://localhost/"
          </Instance>
          <Instance "bar">
            URL "ldaps://localhost/"
          </Instance>
        </Plugin>

       The instance name will be used as the plugin instance. To emulate the old (version 4)
       behavior, you can use an empty string (""). In order for the plugin to work correctly,
       each instance name must be unique. This is not enforced by the plugin and it is your
       responsibility to ensure it is.

       The following options are accepted within each Instance block:

       URL ldap://host/binddn
           Sets the URL to use to connect to the OpenLDAP server. This option is mandatory.

       StartTLS true|false
           Defines whether TLS must be used when connecting to the OpenLDAP server.  Disabled by
           default.

       VerifyHost true|false
           Enables or disables peer host name verification. If enabled, the plugin checks if the
           "Common Name" or a "Subject Alternate Name" field of the SSL certificate matches the
           host name provided by the URL option. If this identity check fails, the connection is
           aborted. Enabled by default.

       CACert File
           File that holds one or more SSL certificates. If you want to use TLS/SSL you may
           possibly need this option. What CA certificates are checked by default depends on the
           distribution you use and can be changed with the usual ldap client configuration
           mechanisms. See ldap.conf(5) for the details.

       Timeout Seconds
           Sets the timeout value for ldap operations. Defaults to -1 which results in an
           infinite timeout.

       Version Version
           An integer which sets the LDAP protocol version number to use when connecting to the
           OpenLDAP server. Defaults to 3 for using LDAPv3.

   Plugin "openvpn"
       The OpenVPN plugin reads a status file maintained by OpenVPN and gathers traffic
       statistics about connected clients.

       To set up OpenVPN to write to the status file periodically, use the --status option of
       OpenVPN. Since OpenVPN can write two different formats, you need to set the required
       format, too. This is done by setting --status-version to 2.

       So, in a nutshell you need:

         openvpn $OTHER_OPTIONS \
           --status "/var/run/openvpn-status" 10 \
           --status-version 2

       Available options:

       StatusFile File
           Specifies the location of the status file.

       ImprovedNamingSchema true|false
           When enabled, the filename of the status file will be used as plugin instance and the
           client's "common name" will be used as type instance. This is required when reading
           multiple status files. Enabling this option is recommended, but to maintain backwards
           compatibility this option is disabled by default.

       CollectCompression true|false
           Sets whether or not statistics about the compression used by OpenVPN should be
           collected. This information is only available in single mode. Enabled by default.

       CollectIndividualUsers true|false
           Sets whether or not traffic information is collected for each connected client
           individually. If set to false, currently no traffic data is collected at all because
           aggregating this data in a save manner is tricky. Defaults to true.

       CollectUserCount true|false
           When enabled, the number of currently connected clients or users is collected.  This
           is especially interesting when CollectIndividualUsers is disabled, but can be
           configured independently from that option. Defaults to false.

   Plugin "oracle"
       The "oracle" plugin uses the OracleX Call Interface (OCI) to connect to an OracleX
       Database and lets you execute SQL statements there. It is very similar to the "dbi"
       plugin, because it was written around the same time. See the "dbi" plugin's documentation
       above for details.

         <Plugin oracle>
           <Query "out_of_stock">
             Statement "SELECT category, COUNT(*) AS value FROM products WHERE in_stock = 0 GROUP BY category"
             <Result>
               Type "gauge"
               # InstancePrefix "foo"
               InstancesFrom "category"
               ValuesFrom "value"
             </Result>
           </Query>
           <Database "product_information">
             ConnectID "db01"
             Username "oracle"
             Password "secret"
             Query "out_of_stock"
           </Database>
         </Plugin>

       Query blocks

       The Query blocks are handled identically to the Query blocks of the "dbi" plugin. Please
       see its documentation above for details on how to specify queries.

       Database blocks

       Database blocks define a connection to a database and which queries should be sent to that
       database. Each database needs a "name" as string argument in the starting tag of the
       block. This name will be used as "PluginInstance" in the values submitted to the daemon.
       Other than that, that name is not used.

       ConnectID ID
           Defines the "database alias" or "service name" to connect to. Usually, these names are
           defined in the file named "$ORACLE_HOME/network/admin/tnsnames.ora".

       Host Host
           Hostname to use when dispatching values for this database. Defaults to using the
           global hostname of the collectd instance.

       Username Username
           Username used for authentication.

       Password Password
           Password used for authentication.

       Query QueryName
           Associates the query named QueryName with this database connection. The query needs to
           be defined before this statement, i. e. all query blocks you want to refer to must be
           placed above the database block you want to refer to them from.

   Plugin "perl"
       This plugin embeds a Perl-interpreter into collectd and provides an interface to
       collectd's plugin system. See collectd-perl(5) for its documentation.

   Plugin "pinba"
       The Pinba plugin receives profiling information from Pinba, an extension for the PHP
       interpreter. At the end of executing a script, i.e. after a PHP-based webpage has been
       delivered, the extension will send a UDP packet containing timing information, peak memory
       usage and so on. The plugin will wait for such packets, parse them and account the
       provided information, which is then dispatched to the daemon once per interval.

       Synopsis:

        <Plugin pinba>
          Address "::0"
          Port "30002"
          # Overall statistics for the website.
          <View "www-total">
            Server "www.example.com"
          </View>
          # Statistics for www-a only
          <View "www-a">
            Host "www-a.example.com"
            Server "www.example.com"
          </View>
          # Statistics for www-b only
          <View "www-b">
            Host "www-b.example.com"
            Server "www.example.com"
          </View>
        </Plugin>

       The plugin provides the following configuration options:

       Address Node
           Configures the address used to open a listening socket. By default, plugin will bind
           to the any address "::0".

       Port Service
           Configures the port (service) to bind to. By default the default Pinba port "30002"
           will be used. The option accepts service names in addition to port numbers and thus
           requires a string argument.

       <View Name> block
           The packets sent by the Pinba extension include the hostname of the server, the server
           name (the name of the virtual host) and the script that was executed.  Using View
           blocks it is possible to separate the data into multiple groups to get more meaningful
           statistics. Each packet is added to all matching groups, so that a packet may be
           accounted for more than once.

           Host Host
               Matches the hostname of the system the webserver / script is running on. This will
               contain the result of the gethostname(2) system call. If not configured, all
               hostnames will be accepted.

           Server Server
               Matches the name of the virtual host, i.e. the contents of the
               $_SERVER["SERVER_NAME"] variable when within PHP. If not configured, all server
               names will be accepted.

           Script Script
               Matches the name of the script name, i.e. the contents of the
               $_SERVER["SCRIPT_NAME"] variable when within PHP. If not configured, all script
               names will be accepted.

   Plugin "ping"
       The Ping plugin starts a new thread which sends ICMP "ping" packets to the configured
       hosts periodically and measures the network latency. Whenever the "read" function of the
       plugin is called, it submits the average latency, the standard deviation and the drop rate
       for each host.

       Available configuration options:

       Host IP-address
           Host to ping periodically. This option may be repeated several times to ping multiple
           hosts.

       Interval Seconds
           Sets the interval in which to send ICMP echo packets to the configured hosts.  This is
           not the interval in which statistics are queries from the plugin but the interval in
           which the hosts are "pinged". Therefore, the setting here should be smaller than or
           equal to the global Interval setting. Fractional times, such as "1.24" are allowed.

           Default: 1.0

       Timeout Seconds
           Time to wait for a response from the host to which an ICMP packet had been sent. If a
           reply was not received after Seconds seconds, the host is assumed to be down or the
           packet to be dropped. This setting must be smaller than the Interval setting above for
           the plugin to work correctly. Fractional arguments are accepted.

           Default: 0.9

       TTL 0-255
           Sets the Time-To-Live of generated ICMP packets.

       SourceAddress host
           Sets the source address to use. host may either be a numerical network address or a
           network hostname.

       Device name
           Sets the outgoing network device to be used. name has to specify an interface name
           (e. g. "eth0"). This might not be supported by all operating systems.

       MaxMissed Packets
           Trigger a DNS resolve after the host has not replied to Packets packets. This enables
           the use of dynamic DNS services (like dyndns.org) with the ping plugin.

           Default: -1 (disabled)

   Plugin "postgresql"
       The "postgresql" plugin queries statistics from PostgreSQL databases. It keeps a
       persistent connection to all configured databases and tries to reconnect if the connection
       has been interrupted. A database is configured by specifying a Database block as described
       below. The default statistics are collected from PostgreSQL's statistics collector which
       thus has to be enabled for this plugin to work correctly. This should usually be the case
       by default. See the section "The Statistics Collector" of the PostgreSQL Documentation for
       details.

       By specifying custom database queries using a Query block as described below, you may
       collect any data that is available from some PostgreSQL database. This way, you are able
       to access statistics of external daemons which are available in a PostgreSQL database or
       use future or special statistics provided by PostgreSQL without the need to upgrade your
       collectd installation.

       Starting with version 5.2, the "postgresql" plugin supports writing data to PostgreSQL
       databases as well. This has been implemented in a generic way. You need to specify an SQL
       statement which will then be executed by collectd in order to write the data (see below
       for details). The benefit of that approach is that there is no fixed database layout.
       Rather, the layout may be optimized for the current setup.

       The PostgreSQL Documentation manual can be found at
       <http://www.postgresql.org/docs/manuals/>.

         <Plugin postgresql>
           <Query magic>
             Statement "SELECT magic FROM wizard WHERE host = $1;"
             Param hostname
             <Result>
               Type gauge
               InstancePrefix "magic"
               ValuesFrom magic
             </Result>
           </Query>

           <Query rt36_tickets>
             Statement "SELECT COUNT(type) AS count, type \
                               FROM (SELECT CASE \
                                            WHEN resolved = 'epoch' THEN 'open' \
                                            ELSE 'resolved' END AS type \
                                            FROM tickets) type \
                               GROUP BY type;"
             <Result>
               Type counter
               InstancePrefix "rt36_tickets"
               InstancesFrom "type"
               ValuesFrom "count"
             </Result>
           </Query>

           <Writer sqlstore>
             Statement "SELECT collectd_insert($1, $2, $3, $4, $5, $6, $7, $8, $9);"
             StoreRates true
           </Writer>

           <Database foo>
             Host "hostname"
             Port "5432"
             User "username"
             Password "secret"
             SSLMode "prefer"
             KRBSrvName "kerberos_service_name"
             Query magic
           </Database>

           <Database bar>
             Interval 300
             Service "service_name"
             Query backend # predefined
             Query rt36_tickets
           </Database>

           <Database qux>
             # ...
             Writer sqlstore
             CommitInterval 10
           </Database>
         </Plugin>

       The Query block defines one database query which may later be used by a database
       definition. It accepts a single mandatory argument which specifies the name of the query.
       The names of all queries have to be unique (see the MinVersion and MaxVersion options
       below for an exception to this rule). The following configuration options are available to
       define the query:

       In each Query block, there is one or more Result blocks. Result blocks define how to
       handle the values returned from the query. They define which column holds which value and
       how to dispatch that value to the daemon.  Multiple Result blocks may be used to extract
       multiple values from a single query.

       Statement sql query statement
           Specify the sql query statement which the plugin should execute. The string may
           contain the tokens $1, $2, etc. which are used to reference the first, second, etc.
           parameter. The value of the parameters is specified by the Param configuration option
           - see below for details. To include a literal $ character followed by a number,
           surround it with single quotes (').

           Any SQL command which may return data (such as "SELECT" or "SHOW") is allowed. Note,
           however, that only a single command may be used. Semicolons are allowed as long as a
           single non-empty command has been specified only.

           The returned lines will be handled separately one after another.

       Param hostname|database|username|interval
           Specify the parameters which should be passed to the SQL query. The parameters are
           referred to in the SQL query as $1, $2, etc. in the same order as they appear in the
           configuration file. The value of the parameter is determined depending on the value of
           the Param option as follows:

           hostname
               The configured hostname of the database connection. If a UNIX domain socket is
               used, the parameter expands to "localhost".

           database
               The name of the database of the current connection.

           instance
               The name of the database plugin instance. See the Instance option of the database
               specification below for details.

           username
               The username used to connect to the database.

           interval
               The interval with which this database is queried (as specified by the database
               specific or global Interval options).

           Please note that parameters are only supported by PostgreSQL's protocol version 3 and
           above which was introduced in version 7.4 of PostgreSQL.

       Type type
           The type name to be used when dispatching the values. The type describes how to handle
           the data and where to store it. See types.db(5) for more details on types and their
           configuration. The number and type of values (as selected by the ValuesFrom option)
           has to match the type of the given name.

           This option is required inside a Result block.

       InstancePrefix prefix
       InstancesFrom column0 [column1 ...]
           Specify how to create the "TypeInstance" for each data set (i. e. line).
           InstancePrefix defines a static prefix that will be prepended to all type instances.
           InstancesFrom defines the column names whose values will be used to create the type
           instance. Multiple values will be joined together using the hyphen ("-") as separation
           character.

           The plugin itself does not check whether or not all built instances are different. It
           is your responsibility to assure that each is unique.

           Both options are optional. If none is specified, the type instance will be empty.

       ValuesFrom column0 [column1 ...]
           Names the columns whose content is used as the actual data for the data sets that are
           dispatched to the daemon. How many such columns you need is determined by the Type
           setting as explained above. If you specify too many or not enough columns, the plugin
           will complain about that and no data will be submitted to the daemon.

           The actual data type, as seen by PostgreSQL, is not that important as long as it
           represents numbers. The plugin will automatically cast the values to the right type if
           it know how to do that. For that, it uses the strtoll(3) and strtod(3) functions, so
           anything supported by those functions is supported by the plugin as well.

           This option is required inside a Result block and may be specified multiple times. If
           multiple ValuesFrom options are specified, the columns are read in the given order.

       MinVersion version
       MaxVersion version
           Specify the minimum or maximum version of PostgreSQL that this query should be used
           with. Some statistics might only be available with certain versions of PostgreSQL.
           This allows you to specify multiple queries with the same name but which apply to
           different versions, thus allowing you to use the same configuration in a heterogeneous
           environment.

           The version has to be specified as the concatenation of the major, minor and patch-
           level versions, each represented as two-decimal-digit numbers. For example, version
           8.2.3 will become 80203.

       The following predefined queries are available (the definitions can be found in the
       postgresql_default.conf file which, by default, is available at "prefix/share/collectd/"):

       backends
           This query collects the number of backends, i. e. the number of connected clients.

       transactions
           This query collects the numbers of committed and rolled-back transactions of the user
           tables.

       queries
           This query collects the numbers of various table modifications (i. e.  insertions,
           updates, deletions) of the user tables.

       query_plans
           This query collects the numbers of various table scans and returned tuples of the user
           tables.

       table_states
           This query collects the numbers of live and dead rows in the user tables.

       disk_io
           This query collects disk block access counts for user tables.

       disk_usage
           This query collects the on-disk size of the database in bytes.

       In addition, the following detailed queries are available by default. Please note that
       each of those queries collects information by table, thus, potentially producing a lot of
       data. For details see the description of the non-by_table queries above.

       queries_by_table
       query_plans_by_table
       table_states_by_table
       disk_io_by_table

       The Writer block defines a PostgreSQL writer backend. It accepts a single mandatory
       argument specifying the name of the writer. This will then be used in the Database
       specification in order to activate the writer instance. The names of all writers have to
       be unique. The following options may be specified:

       Statement sql statement
           This mandatory option specifies the SQL statement that will be executed for each
           submitted value. A single SQL statement is allowed only. Anything after the first
           semicolon will be ignored.

           Nine parameters will be passed to the statement and should be specified as tokens $1,
           $2, through $9 in the statement string. The following values are made available
           through those parameters:

           $1  The timestamp of the queried value as a floating point number.

           $2  The hostname of the queried value.

           $3  The plugin name of the queried value.

           $4  The plugin instance of the queried value. This value may be NULL if there is no
               plugin instance.

           $5  The type of the queried value (cf. types.db(5)).

           $6  The type instance of the queried value. This value may be NULL if there is no type
               instance.

           $7  An array of names for the submitted values (i. e., the name of the data sources of
               the submitted value-list).

           $8  An array of types for the submitted values (i. e., the type of the data sources of
               the submitted value-list; "counter", "gauge", ...). Note, that if StoreRates is
               enabled (which is the default, see below), all types will be "gauge".

           $9  An array of the submitted values. The dimensions of the value name and value
               arrays match.

           In general, it is advisable to create and call a custom function in the PostgreSQL
           database for this purpose. Any procedural language supported by PostgreSQL will do
           (see chapter "Server Programming" in the PostgreSQL manual for details).

       StoreRates false|true
           If set to true (the default), convert counter values to rates. If set to false counter
           values are stored as is, i. e. as an increasing integer number.

       The Database block defines one PostgreSQL database for which to collect statistics. It
       accepts a single mandatory argument which specifies the database name. None of the other
       options are required. PostgreSQL will use default values as documented in the section
       "CONNECTING TO A DATABASE" in the psql(1) manpage. However, be aware that those defaults
       may be influenced by the user collectd is run as and special environment variables. See
       the manpage for details.

       Interval seconds
           Specify the interval with which the database should be queried. The default is to use
           the global Interval setting.

       CommitInterval seconds
           This option may be used for database connections which have "writers" assigned (see
           above). If specified, it causes a writer to put several updates into a single
           transaction. This transaction will last for the specified amount of time. By default,
           each update will be executed in a separate transaction. Each transaction generates a
           fair amount of overhead which can, thus, be reduced by activating this option. The
           draw-back is, that data covering the specified amount of time will be lost, for
           example, if a single statement within the transaction fails or if the database server
           crashes.

       Instance name
           Specify the plugin instance name that should be used instead of the database name
           (which is the default, if this option has not been specified). This allows to query
           multiple databases of the same name on the same host (e.g.  when running multiple
           database server versions in parallel).

       Host hostname
           Specify the hostname or IP of the PostgreSQL server to connect to. If the value begins
           with a slash, it is interpreted as the directory name in which to look for the UNIX
           domain socket.

           This option is also used to determine the hostname that is associated with a collected
           data set. If it has been omitted or either begins with with a slash or equals
           localhost it will be replaced with the global hostname definition of collectd. Any
           other value will be passed literally to collectd when dispatching values. Also see the
           global Hostname and FQDNLookup options.

       Port port
           Specify the TCP port or the local UNIX domain socket file extension of the server.

       User username
           Specify the username to be used when connecting to the server.

       Password password
           Specify the password to be used when connecting to the server.

       ExpireDelay delay
           Skip expired values in query output.

       SSLMode disable|allow|prefer|require
           Specify whether to use an SSL connection when contacting the server. The following
           modes are supported:

           disable
               Do not use SSL at all.

           allow
               First, try to connect without using SSL. If that fails, try using SSL.

           prefer (default)
               First, try to connect using SSL. If that fails, try without using SSL.

           require
               Use SSL only.

       Instance name
           Specify the plugin instance name that should be used instead of the database name
           (which is the default, if this option has not been specified). This allows to query
           multiple databases of the same name on the same host (e.g.  when running multiple
           database server versions in parallel).

       KRBSrvName kerberos_service_name
           Specify the Kerberos service name to use when authenticating with Kerberos 5 or
           GSSAPI. See the sections "Kerberos authentication" and "GSSAPI" of the PostgreSQL
           Documentation for details.

       Service service_name
           Specify the PostgreSQL service name to use for additional parameters. That service has
           to be defined in pg_service.conf and holds additional connection parameters. See the
           section "The Connection Service File" in the PostgreSQL Documentation for details.

       Query query
           Specifies a query which should be executed in the context of the database connection.
           This may be any of the predefined or user-defined queries. If no such option is given,
           it defaults to "backends", "transactions", "queries", "query_plans", "table_states",
           "disk_io" and "disk_usage" (unless a Writer has been specified). Else, the specified
           queries are used only.

       Writer writer
           Assigns the specified writer backend to the database connection. This causes all
           collected data to be send to the database using the settings defined in the writer
           configuration (see the section "FILTER CONFIGURATION" below for details on how to
           selectively send data to certain plugins).

           Each writer will register a flush callback which may be used when having long
           transactions enabled (see the CommitInterval option above). When issuing the FLUSH
           command (see collectd-unixsock(5) for details) the current transaction will be
           committed right away. Two different kinds of flush callbacks are available with the
           "postgresql" plugin:

           postgresql
               Flush all writer backends.

           postgresql-database
               Flush all writers of the specified database only.

   Plugin "powerdns"
       The "powerdns" plugin queries statistics from an authoritative PowerDNS nameserver and/or
       a PowerDNS recursor. Since both offer a wide variety of values, many of which are probably
       meaningless to most users, but may be useful for some. So you may chose which values to
       collect, but if you don't, some reasonable defaults will be collected.

         <Plugin "powerdns">
           <Server "server_name">
             Collect "latency"
             Collect "udp-answers" "udp-queries"
             Socket "/var/run/pdns.controlsocket"
           </Server>
           <Recursor "recursor_name">
             Collect "questions"
             Collect "cache-hits" "cache-misses"
             Socket "/var/run/pdns_recursor.controlsocket"
           </Recursor>
           LocalSocket "/opt/collectd/var/run/collectd-powerdns"
         </Plugin>

       Server and Recursor block
           The Server block defines one authoritative server to query, the Recursor does the same
           for an recursing server. The possible options in both blocks are the same, though. The
           argument defines a name for the server / recursor and is required.

           Collect Field
               Using the Collect statement you can select which values to collect. Here, you
               specify the name of the values as used by the PowerDNS servers, e. g.
               "dlg-only-drops", "answers10-100".

               The method of getting the values differs for Server and Recursor blocks: When
               querying the server a "SHOW *" command is issued in any case, because that's the
               only way of getting multiple values out of the server at once.  collectd then
               picks out the values you have selected. When querying the recursor, a command is
               generated to query exactly these values. So if you specify invalid fields when
               querying the recursor, a syntax error may be returned by the daemon and collectd
               may not collect any values at all.

               If no Collect statement is given, the following Server values will be collected:

               latency
               packetcache-hit
               packetcache-miss
               packetcache-size
               query-cache-hit
               query-cache-miss
               recursing-answers
               recursing-questions
               tcp-answers
               tcp-queries
               udp-answers
               udp-queries

               The following Recursor values will be collected by default:

               noerror-answers
               nxdomain-answers
               servfail-answers
               sys-msec
               user-msec
               qa-latency
               cache-entries
               cache-hits
               cache-misses
               questions

               Please note that up to that point collectd doesn't know what values are available
               on the server and values that are added do not need a change of the mechanism so
               far. However, the values must be mapped to collectd's naming scheme, which is done
               using a lookup table that lists all known values. If values are added in the
               future and collectd does not know about them, you will get an error much like
               this:

                 powerdns plugin: submit: Not found in lookup table: foobar = 42

               In this case please file a bug report with the collectd team.

           Socket Path
               Configures the path to the UNIX domain socket to be used when connecting to the
               daemon. By default "${localstatedir}/run/pdns.controlsocket" will be used for an
               authoritative server and "${localstatedir}/run/pdns_recursor.controlsocket" will
               be used for the recursor.

       LocalSocket Path
           Querying the recursor is done using UDP. When using UDP over UNIX domain sockets, the
           client socket needs a name in the file system, too. You can set this local name to
           Path using the LocalSocket option. The default is "prefix/var/run/collectd-powerdns".

   Plugin "processes"
       Process Name
           Select more detailed statistics of processes matching this name. The statistics
           collected for these selected processes are size of the resident segment size (RSS),
           user- and system-time used, number of processes and number of threads, io data (where
           available) and minor and major pagefaults.

       ProcessMatch name regex
           Similar to the Process option this allows to select more detailed statistics of
           processes matching the specified regex (see regex(7) for details). The statistics of
           all matching processes are summed up and dispatched to the daemon using the specified
           name as an identifier. This allows to "group" several processes together. name must
           not contain slashes.

   Plugin "protocols"
       Collects a lot of information about various network protocols, such as IP, TCP, UDP, etc.

       Available configuration options:

       Value Selector
           Selects whether or not to select a specific value. The string being matched is of the
           form "Protocol:ValueName", where Protocol will be used as the plugin instance and
           ValueName will be used as type instance. An example of the string being used would be
           "Tcp:RetransSegs".

           You can use regular expressions to match a large number of values with just one
           configuration option. To select all "extended" TCP values, you could use the following
           statement:

             Value "/^TcpExt:/"

           Whether only matched values are selected or all matched values are ignored depends on
           the IgnoreSelected. By default, only matched values are selected.  If no value is
           configured at all, all values will be selected.

       IgnoreSelected true|false
           If set to true, inverts the selection made by Value, i. e. all matching values will be
           ignored.

   Plugin "python"
       This plugin embeds a Python-interpreter into collectd and provides an interface to
       collectd's plugin system. See collectd-python(5) for its documentation.

   Plugin "routeros"
       The "routeros" plugin connects to a device running RouterOS, the Linux-based operating
       system for routers by MikroTik. The plugin uses librouteros to connect and reads
       information about the interfaces and wireless connections of the device. The configuration
       supports querying multiple routers:

         <Plugin "routeros">
           <Router>
             Host "router0.example.com"
             User "collectd"
             Password "secr3t"
             CollectInterface true
             CollectCPULoad true
             CollectMemory true
           </Router>
           <Router>
             Host "router1.example.com"
             User "collectd"
             Password "5ecret"
             CollectInterface true
             CollectRegistrationTable true
             CollectDF true
             CollectDisk true
           </Router>
         </Plugin>

       As you can see above, the configuration of the routeros plugin consists of one or more
       <Router> blocks. Within each block, the following options are understood:

       Host Host
           Hostname or IP-address of the router to connect to.

       Port Port
           Port name or port number used when connecting. If left unspecified, the default will
           be chosen by librouteros, currently "8728". This option expects a string argument,
           even when a numeric port number is given.

       User User
           Use the user name User to authenticate. Defaults to "admin".

       Password Password
           Set the password used to authenticate.

       CollectInterface true|false
           When set to true, interface statistics will be collected for all interfaces present on
           the device. Defaults to false.

       CollectRegistrationTable true|false
           When set to true, information about wireless LAN connections will be collected.
           Defaults to false.

       CollectCPULoad true|false
           When set to true, information about the CPU usage will be collected. The number is a
           dimensionless value where zero indicates no CPU usage at all.  Defaults to false.

       CollectMemory true|false
           When enabled, the amount of used and free memory will be collected. How used memory is
           calculated is unknown, for example whether or not caches are counted as used space.
           Defaults to false.

       CollectDF true|false
           When enabled, the amount of used and free disk space will be collected.  Defaults to
           false.

       CollectDisk true|false
           When enabled, the number of sectors written and bad blocks will be collected.
           Defaults to false.

   Plugin "redis"
       The Redis plugin connects to one or more Redis servers and gathers information about each
       server's state. For each server there is a Node block which configures the connection
       parameters for this node.

         <Plugin redis>
           <Node "example">
               Host "localhost"
               Port "6379"
               Timeout 2000
               <Query "LLEN myqueue">
                 Type "queue_length"
                 Instance "myqueue"
               <Query>
           </Node>
         </Plugin>

       The information shown in the synopsis above is the default configuration which is used by
       the plugin if no configuration is present.

       Node Nodename
           The Node block identifies a new Redis node, that is a new Redis instance running in an
           specified host and port. The name for node is a canonical identifier which is used as
           plugin instance. It is limited to 64 characters in length.

       Host Hostname
           The Host option is the hostname or IP-address where the Redis instance is running on.

       Port Port
           The Port option is the TCP port on which the Redis instance accepts connections.
           Either a service name of a port number may be given. Please note that numerical port
           numbers must be given as a string, too.

       Password Password
           Use Password to authenticate when connecting to Redis.

       Timeout Milliseconds
           The Timeout option set the socket timeout for node response. Since the Redis read
           function is blocking, you should keep this value as low as possible. Keep in mind that
           the sum of all Timeout values for all Nodes should be lower than Interval defined
           globally.

       Query Querystring
           The Query block identifies a query to execute against the redis server.  There may be
           an arbitrary number of queries to execute.

       Type Collectd type
           Within a query definition, a valid collectd type to use as when submitting the result
           of the query. When not supplied, will default to gauge.

       Instance Type instance
           Within a query definition, an optional type instance to use when submitting the result
           of the query. When not supplied will default to the escaped command, up to 64 chars.

   Plugin "rrdcached"
       The "rrdcached" plugin uses the RRDtool accelerator daemon, rrdcached(1), to store values
       to RRD files in an efficient manner. The combination of the "rrdcached" plugin and the
       "rrdcached" daemon is very similar to the way the "rrdtool" plugin works (see below). The
       added abstraction layer provides a number of benefits, though: Because the cache is not
       within "collectd" anymore, it does not need to be flushed when "collectd" is to be
       restarted. This results in much shorter (if any) gaps in graphs, especially under heavy
       load. Also, the "rrdtool" command line utility is aware of the daemon so that it can flush
       values to disk automatically when needed. This allows to integrate automated flushing of
       values into graphing solutions much more easily.

       There are disadvantages, though: The daemon may reside on a different host, so it may not
       be possible for "collectd" to create the appropriate RRD files anymore. And even if
       "rrdcached" runs on the same host, it may run in a different base directory, so relative
       paths may do weird stuff if you're not careful.

       So the recommended configuration is to let "collectd" and "rrdcached" run on the same
       host, communicating via a UNIX domain socket. The DataDir setting should be set to an
       absolute path, so that a changed base directory does not result in RRD files being
       created / expected in the wrong place.

       DaemonAddress Address
           Address of the daemon as understood by the "rrdc_connect" function of the RRD library.
           See rrdcached(1) for details. Example:

             <Plugin "rrdcached">
               DaemonAddress "unix:/var/run/rrdcached.sock"
             </Plugin>

       DataDir Directory
           Set the base directory in which the RRD files reside. If this is a relative path, it
           is relative to the working base directory of the "rrdcached" daemon!  Use of an
           absolute path is recommended.

       CreateFiles true|false
           Enables or disables the creation of RRD files. If the daemon is not running locally,
           or DataDir is set to a relative path, this will not work as expected. Default is true.

       CreateFilesAsync false|true
           When enabled, new RRD files are enabled asynchronously, using a separate thread that
           runs in the background. This prevents writes to block, which is a problem especially
           when many hundreds of files need to be created at once. However, since the purpose of
           creating the files asynchronously is not to block until the file is available, values
           before the file is available will be discarded.  When disabled (the default) files are
           created synchronously, blocking for a short while, while the file is being written.

       StepSize Seconds
           Force the stepsize of newly created RRD-files. Ideally (and per default) this setting
           is unset and the stepsize is set to the interval in which the data is collected. Do
           not use this option unless you absolutely have to for some reason. Setting this option
           may cause problems with the "snmp plugin", the "exec plugin" or when the daemon is set
           up to receive data from other hosts.

       HeartBeat Seconds
           Force the heartbeat of newly created RRD-files. This setting should be unset in which
           case the heartbeat is set to twice the StepSize which should equal the interval in
           which data is collected. Do not set this option unless you have a very good reason to
           do so.

       RRARows NumRows
           The "rrdtool plugin" calculates the number of PDPs per CDP based on the StepSize, this
           setting and a timespan. This plugin creates RRD-files with three times five RRAs, i.
           e. five RRAs with the CFs MIN, AVERAGE, and MAX. The five RRAs are optimized for
           graphs covering one hour, one day, one week, one month, and one year.

           So for each timespan, it calculates how many PDPs need to be consolidated into one CDP
           by calculating:
             number of PDPs = timespan / (stepsize * rrarows)

           Bottom line is, set this no smaller than the width of you graphs in pixels. The
           default is 1200.

       RRATimespan Seconds
           Adds an RRA-timespan, given in seconds. Use this option multiple times to have more
           then one RRA. If this option is never used, the built-in default of (3600, 86400,
           604800, 2678400, 31622400) is used.

           For more information on how RRA-sizes are calculated see RRARows above.

       XFF Factor
           Set the "XFiles Factor". The default is 0.1. If unsure, don't set this option.  Factor
           must be in the range "[0.0-1.0)", i.e. between zero (inclusive) and one (exclusive).

       CollectStatistics false|true
           When set to true, various statistics about the rrdcached daemon will be collected,
           with "rrdcached" as the plugin name. Defaults to false.

           Statistics are read via rrdcacheds socket using the STATS command.  See rrdcached(1)
           for details.

   Plugin "rrdtool"
       You can use the settings StepSize, HeartBeat, RRARows, and XFF to fine-tune your RRD-
       files. Please read rrdcreate(1) if you encounter problems using these settings. If you
       don't want to dive into the depths of RRDtool, you can safely ignore these settings.

       DataDir Directory
           Set the directory to store RRD files under. By default RRD files are generated beneath
           the daemon's working directory, i.e. the BaseDir.

       CreateFilesAsync false|true
           When enabled, new RRD files are enabled asynchronously, using a separate thread that
           runs in the background. This prevents writes to block, which is a problem especially
           when many hundreds of files need to be created at once. However, since the purpose of
           creating the files asynchronously is not to block until the file is available, values
           before the file is available will be discarded.  When disabled (the default) files are
           created synchronously, blocking for a short while, while the file is being written.

       StepSize Seconds
           Force the stepsize of newly created RRD-files. Ideally (and per default) this setting
           is unset and the stepsize is set to the interval in which the data is collected. Do
           not use this option unless you absolutely have to for some reason. Setting this option
           may cause problems with the "snmp plugin", the "exec plugin" or when the daemon is set
           up to receive data from other hosts.

       HeartBeat Seconds
           Force the heartbeat of newly created RRD-files. This setting should be unset in which
           case the heartbeat is set to twice the StepSize which should equal the interval in
           which data is collected. Do not set this option unless you have a very good reason to
           do so.

       RRARows NumRows
           The "rrdtool plugin" calculates the number of PDPs per CDP based on the StepSize, this
           setting and a timespan. This plugin creates RRD-files with three times five RRAs, i.e.
           five RRAs with the CFs MIN, AVERAGE, and MAX. The five RRAs are optimized for graphs
           covering one hour, one day, one week, one month, and one year.

           So for each timespan, it calculates how many PDPs need to be consolidated into one CDP
           by calculating:
             number of PDPs = timespan / (stepsize * rrarows)

           Bottom line is, set this no smaller than the width of you graphs in pixels. The
           default is 1200.

       RRATimespan Seconds
           Adds an RRA-timespan, given in seconds. Use this option multiple times to have more
           then one RRA. If this option is never used, the built-in default of (3600, 86400,
           604800, 2678400, 31622400) is used.

           For more information on how RRA-sizes are calculated see RRARows above.

       XFF Factor
           Set the "XFiles Factor". The default is 0.1. If unsure, don't set this option.  Factor
           must be in the range "[0.0-1.0)", i.e. between zero (inclusive) and one (exclusive).

       CacheFlush Seconds
           When the "rrdtool" plugin uses a cache (by setting CacheTimeout, see below) it writes
           all values for a certain RRD-file if the oldest value is older than (or equal to) the
           number of seconds specified. If some RRD-file is not updated anymore for some reason
           (the computer was shut down, the network is broken, etc.) some values may still be in
           the cache. If CacheFlush is set, then the entire cache is searched for entries older
           than CacheTimeout seconds and written to disk every Seconds seconds. Since this is
           kind of expensive and does nothing under normal circumstances, this value should not
           be too small.  900 seconds might be a good value, though setting this to 7200 seconds
           doesn't normally do much harm either.

       CacheTimeout Seconds
           If this option is set to a value greater than zero, the "rrdtool plugin" will save
           values in a cache, as described above. Writing multiple values at once reduces IO-
           operations and thus lessens the load produced by updating the files.  The trade off is
           that the graphs kind of "drag behind" and that more memory is used.

       WritesPerSecond Updates
           When collecting many statistics with collectd and the "rrdtool" plugin, you will run
           serious performance problems. The CacheFlush setting and the internal update queue
           assert that collectd continues to work just fine even under heavy load, but the system
           may become very unresponsive and slow. This is a problem especially if you create
           graphs from the RRD files on the same machine, for example using the "graph.cgi"
           script included in the "contrib/collection3/" directory.

           This setting is designed for very large setups. Setting this option to a value between
           25 and 80 updates per second, depending on your hardware, will leave the server
           responsive enough to draw graphs even while all the cached values are written to disk.
           Flushed values, i. e. values that are forced to disk by the FLUSH command, are not
           effected by this limit. They are still written as fast as possible, so that web
           frontends have up to date data when generating graphs.

           For example: If you have 100,000 RRD files and set WritesPerSecond to 30 updates per
           second, writing all values to disk will take approximately 56 minutes. Together with
           the flushing ability that's integrated into "collection3" you'll end up with a
           responsive and fast system, up to date graphs and basically a "backup" of your values
           every hour.

       RandomTimeout Seconds
           When set, the actual timeout for each value is chosen randomly between
           CacheTimeout-RandomTimeout and CacheTimeout+RandomTimeout. The intention is to avoid
           high load situations that appear when many values timeout at the same time. This is
           especially a problem shortly after the daemon starts, because all values were added to
           the internal cache at roughly the same time.

   Plugin "sensors"
       The Sensors plugin uses lm_sensors to retrieve sensor-values. This means that all the
       needed modules have to be loaded and lm_sensors has to be configured (most likely by
       editing /etc/sensors.conf. Read sensors.conf(5) for details.

       The lm_sensors homepage can be found at <http://secure.netroedge.com/~lm78/>.

       SensorConfigFile File
           Read the lm_sensors configuration from File. When unset (recommended), the library's
           default will be used.

       Sensor chip-bus-address/type-feature
           Selects the name of the sensor which you want to collect or ignore, depending on the
           IgnoreSelected below. For example, the option "Sensor it8712-isa-0290/voltage-in1"
           will cause collectd to gather data for the voltage sensor in1 of the it8712 on the isa
           bus at the address 0290.

       IgnoreSelected true|false
           If no configuration if given, the sensors-plugin will collect data from all sensors.
           This may not be practical, especially for uninteresting sensors.  Thus, you can use
           the Sensor-option to pick the sensors you're interested in. Sometimes, however, it's
           easier/preferred to collect all sensors except a few ones. This option enables you to
           do that: By setting IgnoreSelected to true the effect of Sensor is inverted: All
           selected sensors are ignored and all other sensors are collected.

   Plugin "sigrok"
       The sigrok plugin uses libsigrok to retrieve measurements from any device supported by the
       sigrok <http://sigrok.org/> project.

       Synopsis

        <Plugin sigrok>
          LogLevel 3
          <Device "AC Voltage">
             Driver "fluke-dmm"
             MinimumInterval 10
             Conn "/dev/ttyUSB2"
          </Device>
          <Device "Sound Level">
             Driver "cem-dt-885x"
             Conn "/dev/ttyUSB1"
          </Device>
        </Plugin>

       LogLevel 0-5
           The sigrok logging level to pass on to the collectd log, as a number between 0 and 5
           (inclusive). These levels correspond to "None", "Errors", "Warnings", "Informational",
           "Debug "and "Spew", respectively.  The default is 2 ("Warnings"). The sigrok log
           messages, regardless of their level, are always submitted to collectd at its INFO log
           level.

       <Device Name>
           A sigrok-supported device, uniquely identified by this section's options. The Name is
           passed to collectd as the plugin instance.

       Driver DriverName
           The sigrok driver to use for this device.

       Conn ConnectionSpec
           If the device cannot be auto-discovered, or more than one might be discovered by the
           driver, ConnectionSpec specifies the connection string to the device.  It can be of
           the form of a device path (e.g. "/dev/ttyUSB2"), or, in case of a non-serial USB-
           connected device, the USB VendorID.ProductID separated by a period (e.g. 0403.6001). A
           USB device can also be specified as Bus.Address (e.g. 1.41).

       SerialComm SerialSpec
           For serial devices with non-standard port settings, this option can be used to specify
           them in a form understood by sigrok, e.g. "9600/8n1".  This should not be necessary;
           drivers know how to communicate with devices they support.

       MinimumInterval Seconds
           Specifies the minimum time between measurement dispatches to collectd, in seconds.
           Since some sigrok supported devices can acquire measurements many times per second, it
           may be necessary to throttle these. For example, the RRD plugin cannot process writes
           more than once per second.

           The default MinimumInterval is 0, meaning measurements received from the device are
           always dispatched to collectd. When throttled, unused measurements are discarded.

   Plugin "smart"
       The "smart" plugin collects SMART information from physical disks. Values collectd include
       temperature, power cycle count, poweron time and bad sectors. Also, all SMART attributes
       are collected along with the normalized current value, the worst value, the threshold and
       a human readable value.

       Using the following two options you can ignore some disks or configure the collection only
       of specific disks.

       Disk Name
           Select the disk Name. Whether it is collected or ignored depends on the IgnoreSelected
           setting, see below. As with other plugins that use the daemon's ignorelist
           functionality, a string that starts and ends with a slash is interpreted as a regular
           expression. Examples:

             Disk "sdd"
             Disk "/hda[34]/"

       IgnoreSelected true|false
           Sets whether selected disks, i. e. the ones matches by any of the Disk statements, are
           ignored or if all other disks are ignored. The behavior (hopefully) is intuitive: If
           no Disk option is configured, all disks are collected. If at least one Disk option is
           given and no IgnoreSelected or set to false, only matching disks will be collected. If
           IgnoreSelected is set to true, all disks are collected except the ones matched.

   Plugin "snmp"
       Since the configuration of the "snmp plugin" is a little more complicated than other
       plugins, its documentation has been moved to an own manpage, collectd-snmp(5). Please see
       there for details.

   Plugin "statsd"
       The statsd plugin listens to a UDP socket, reads "events" in the statsd protocol and
       dispatches rates or other aggregates of these numbers periodically.

       The plugin implements the Counter, Timer, Gauge and Set types which are dispatched as the
       collectd types "derive", "latency", "gauge" and "objects" respectively.

       The following configuration options are valid:

       Host Host
           Bind to the hostname / address Host. By default, the plugin will bind to the "any"
           address, i.e. accept packets sent to any of the hosts addresses.

       Port Port
           UDP port to listen to. This can be either a service name or a port number.  Defaults
           to 8125.

       DeleteCounters false|true
       DeleteTimers false|true
       DeleteGauges false|true
       DeleteSets false|true
           These options control what happens if metrics are not updated in an interval.  If set
           to False, the default, metrics are dispatched unchanged, i.e. the rate of counters and
           size of sets will be zero, timers report "NaN" and gauges are unchanged. If set to
           True, the such metrics are not dispatched and removed from the internal cache.

       TimerPercentile Percent
           Calculate and dispatch the configured percentile, i.e. compute the latency, so that
           Percent of all reported timers are smaller than or equal to the computed latency. This
           is useful for cutting off the long tail latency, as it's often done in Service Level
           Agreements (SLAs).

           Different percentiles can be calculated by setting this option several times.  If none
           are specified, no percentiles are calculated / dispatched.

       TimerLower false|true
       TimerUpper false|true
       TimerSum false|true
       TimerCount false|true
           Calculate and dispatch various values out of Timer metrics received during an
           interval. If set to False, the default, these values aren't calculated / dispatched.

   Plugin "swap"
       The Swap plugin collects information about used and available swap space. On Linux and
       Solaris, the following options are available:

       ReportByDevice false|true
           Configures how to report physical swap devices. If set to false (the default), the
           summary over all swap devices is reported only, i.e. the globally used and available
           space over all devices. If true is configured, the used and available space of each
           device will be reported separately.

           This option is only available if the Swap plugin can read "/proc/swaps" (under Linux)
           or use the swapctl(2) mechanism (under Solaris).

       ReportBytes false|true
           When enabled, the swap I/O is reported in bytes. When disabled, the default, swap I/O
           is reported in pages. This option is available under Linux only.

       ValuesAbsolute true|false
           Enables or disables reporting of absolute swap metrics, i.e. number of bytes available
           and used. Defaults to true.

       ValuesPercentage false|true
           Enables or disables reporting of relative swap metrics, i.e. percent available and
           free. Defaults to false.

           This is useful for deploying collectd in a heterogeneous environment, where swap sizes
           differ and you want to specify generic thresholds or similar.

   Plugin "syslog"
       LogLevel debug|info|notice|warning|err
           Sets the log-level. If, for example, set to notice, then all events with severity
           notice, warning, or err will be submitted to the syslog-daemon.

           Please note that debug is only available if collectd has been compiled with debugging
           support.

       NotifyLevel OKAY|WARNING|FAILURE
           Controls which notifications should be sent to syslog. The default behaviour is not to
           send any. Less severe notifications always imply logging more severe notifications:
           Setting this to OKAY means all notifications will be sent to syslog, setting this to
           WARNING will send WARNING and FAILURE notifications but will dismiss OKAY
           notifications. Setting this option to FAILURE will only send failures to syslog.

   Plugin "table"
       The "table plugin" provides generic means to parse tabular data and dispatch user
       specified values. Values are selected based on column numbers. For example, this plugin
       may be used to get values from the Linux proc(5) filesystem or CSV (comma separated
       values) files.

         <Plugin table>
           <Table "/proc/slabinfo">
             Instance "slabinfo"
             Separator " "
             <Result>
               Type gauge
               InstancePrefix "active_objs"
               InstancesFrom 0
               ValuesFrom 1
             </Result>
             <Result>
               Type gauge
               InstancePrefix "objperslab"
               InstancesFrom 0
               ValuesFrom 4
             </Result>
           </Table>
         </Plugin>

       The configuration consists of one or more Table blocks, each of which configures one file
       to parse. Within each Table block, there are one or more Result blocks, which configure
       which data to select and how to interpret it.

       The following options are available inside a Table block:

       Instance instance
           If specified, instance is used as the plugin instance. So, in the above example, the
           plugin name "table-slabinfo" would be used. If omitted, the filename of the table is
           used instead, with all special characters replaced with an underscore ("_").

       Separator string
           Any character of string is interpreted as a delimiter between the different columns of
           the table. A sequence of two or more contiguous delimiters in the table is considered
           to be a single delimiter, i. e. there cannot be any empty columns. The plugin uses the
           strtok_r(3) function to parse the lines of a table - see its documentation for more
           details. This option is mandatory.

           A horizontal tab, newline and carriage return may be specified by "\\t", "\\n" and
           "\\r" respectively. Please note that the double backslashes are required because of
           collectd's config parsing.

       The following options are available inside a Result block:

       Type type
           Sets the type used to dispatch the values to the daemon. Detailed information about
           types and their configuration can be found in types.db(5). This option is mandatory.

       InstancePrefix prefix
           If specified, prepend prefix to the type instance. If omitted, only the InstancesFrom
           option is considered for the type instance.

       InstancesFrom column0 [column1 ...]
           If specified, the content of the given columns (identified by the column number
           starting at zero) will be used to create the type instance for each row. Multiple
           values (and the instance prefix) will be joined together with dashes (-) as separation
           character. If omitted, only the InstancePrefix option is considered for the type
           instance.

           The plugin itself does not check whether or not all built instances are different.
           ItXs your responsibility to assure that each is unique. This is especially true, if
           you do not specify InstancesFrom: You have to make sure that the table only contains
           one row.

           If neither InstancePrefix nor InstancesFrom is given, the type instance will be empty.

       ValuesFrom column0 [column1 ...]
           Specifies the columns (identified by the column numbers starting at zero) whose
           content is used as the actual data for the data sets that are dispatched to the
           daemon. How many such columns you need is determined by the Type setting above. If you
           specify too many or not enough columns, the plugin will complain about that and no
           data will be submitted to the daemon. The plugin uses strtoll(3) and strtod(3) to
           parse counter and gauge values respectively, so anything supported by those functions
           is supported by the plugin as well. This option is mandatory.

   Plugin "tail"
       The "tail plugin" follows logfiles, just like tail(1) does, parses each line and
       dispatches found values. What is matched can be configured by the user using (extended)
       regular expressions, as described in regex(7).

         <Plugin "tail">
           <File "/var/log/exim4/mainlog">
             Instance "exim"
             Interval 60
             <Match>
               Regex "S=([1-9][0-9]*)"
               DSType "CounterAdd"
               Type "ipt_bytes"
               Instance "total"
             </Match>
             <Match>
               Regex "\\<R=local_user\\>"
               ExcludeRegex "\\<R=local_user\\>.*mail_spool defer"
               DSType "CounterInc"
               Type "counter"
               Instance "local_user"
             </Match>
           </File>
         </Plugin>

       The config consists of one or more File blocks, each of which configures one logfile to
       parse. Within each File block, there are one or more Match blocks, which configure a
       regular expression to search for.

       The Instance option in the File block may be used to set the plugin instance. So in the
       above example the plugin name "tail-foo" would be used.  This plugin instance is for all
       Match blocks that follow it, until the next Instance option. This way you can extract
       several plugin instances from one logfile, handy when parsing syslog and the like.

       The Interval option allows you to define the length of time between reads. If this is not
       set, the default Interval will be used.

       Each Match block has the following options to describe how the match should be performed:

       Regex regex
           Sets the regular expression to use for matching against a line. The first
           subexpression has to match something that can be turned into a number by strtoll(3) or
           strtod(3), depending on the value of "CounterAdd", see below. Because extended regular
           expressions are used, you do not need to use backslashes for subexpressions! If in
           doubt, please consult regex(7). Due to collectd's config parsing you need to escape
           backslashes, though. So if you want to match literal parentheses you need to do the
           following:

             Regex "SPAM \\(Score: (-?[0-9]+\\.[0-9]+)\\)"

       ExcludeRegex regex
           Sets an optional regular expression to use for excluding lines from the match.  An
           example which excludes all connections from localhost from the match:

             ExcludeRegex "127\\.0\\.0\\.1"

       DSType Type
           Sets how the values are cumulated. Type is one of:

           GaugeAverage
               Calculate the average.

           GaugeMin
               Use the smallest number only.

           GaugeMax
               Use the greatest number only.

           GaugeLast
               Use the last number found.

           CounterSet
           DeriveSet
           AbsoluteSet
               The matched number is a counter. Simply sets the internal counter to this value.
               Variants exist for "COUNTER", "DERIVE", and "ABSOLUTE" data sources.

           GaugeAdd
           CounterAdd
           DeriveAdd
               Add the matched value to the internal counter. In case of DeriveAdd, the matched
               number may be negative, which will effectively subtract from the internal counter.

           GaugeInc
           CounterInc
           DeriveInc
               Increase the internal counter by one. These DSType are the only ones that do not
               use the matched subexpression, but simply count the number of matched lines. Thus,
               you may use a regular expression without submatch in this case.

           As you'd expect the Gauge* types interpret the submatch as a floating point number,
           using strtod(3). The Counter* and AbsoluteSet types interpret the submatch as an
           unsigned integer using strtoull(3). The Derive* types interpret the submatch as a
           signed integer using strtoll(3). CounterInc and DeriveInc do not use the submatch at
           all and it may be omitted in this case.

       Type Type
           Sets the type used to dispatch this value. Detailed information about types and their
           configuration can be found in types.db(5).

       Instance TypeInstance
           This optional setting sets the type instance to use.

   Plugin "tail_csv"
       The tail_csv plugin reads files in the CSV format, e.g. the statistics file written by
       Snort.

       Synopsis:

        <Plugin "tail_csv">
          <Metric "snort-dropped">
              Type "percent"
              Instance "dropped"
              Index 1
          </Metric>
          <File "/var/log/snort/snort.stats">
              Instance "snort-eth0"
              Interval 600
              Collect "snort-dropped"
          </File>
        </Plugin>

       The configuration consists of one or more Metric blocks that define an index into the line
       of the CSV file and how this value is mapped to collectd's internal representation. These
       are followed by one or more Instance blocks which configure which file to read, in which
       interval and which metrics to extract.

       <Metric Name>
           The Metric block configures a new metric to be extracted from the statistics file and
           how it is mapped on collectd's data model. The string Name is only used inside the
           Instance blocks to refer to this block, so you can use one Metric block for multiple
           CSV files.

           Type Type
               Configures which Type to use when dispatching this metric. Types are defined in
               the types.db(5) file, see the appropriate manual page for more information on
               specifying types. Only types with a single data source are supported by the
               tail_csv plugin. The information whether the value is an absolute value (i.e. a
               "GAUGE") or a rate (i.e. a "DERIVE") is taken from the Type's definition.

           Instance TypeInstance
               If set, TypeInstance is used to populate the type instance field of the created
               value lists. Otherwise, no type instance is used.

           ValueFrom Index
               Configure to read the value from the field with the zero-based index Index.  If
               the value is parsed as signed integer, unsigned integer or double depends on the
               Type setting, see above.

       <File Path>
           Each File block represents one CSV file to read. There must be at least one File block
           but there can be multiple if you have multiple CSV files.

           Instance PluginInstance
               Sets the plugin instance used when dispatching the values.

           Collect Metric
               Specifies which Metric to collect. This option must be specified at least once,
               and you can use this option multiple times to specify more than one metric to be
               extracted from this statistic file.

           Interval Seconds
               Configures the interval in which to read values from this instance / file.
               Defaults to the plugin's default interval.

           TimeFrom Index
               Rather than using the local time when dispatching a value, read the timestamp from
               the field with the zero-based index Index. The value is interpreted as seconds
               since epoch. The value is parsed as a double and may be factional.

   Plugin "teamspeak2"
       The "teamspeak2 plugin" connects to the query port of a teamspeak2 server and polls
       interesting global and virtual server data. The plugin can query only one physical server
       but unlimited virtual servers. You can use the following options to configure it:

       Host hostname/ip
           The hostname or ip which identifies the physical server.  Default: 127.0.0.1

       Port port
           The query port of the physical server. This needs to be a string.  Default: "51234"

       Server port
           This option has to be added once for every virtual server the plugin should query. If
           you want to query the virtual server on port 8767 this is what the option would look
           like:

             Server "8767"

           This option, although numeric, needs to be a string, i. e. you must use quotes around
           it! If no such statement is given only global information will be collected.

   Plugin "ted"
       The TED plugin connects to a device of "The Energy Detective", a device to measure power
       consumption. These devices are usually connected to a serial (RS232) or USB port. The
       plugin opens a configured device and tries to read the current energy readings. For more
       information on TED, visit <http://www.theenergydetective.com/>.

       Available configuration options:

       Device Path
           Path to the device on which TED is connected. collectd will need read and write
           permissions on that file.

           Default: /dev/ttyUSB0

       Retries Num
           Apparently reading from TED is not that reliable. You can therefore configure a number
           of retries here. You only configure the retries here, to if you specify zero, one
           reading will be performed (but no retries if that fails); if you specify three, a
           maximum of four readings are performed. Negative values are illegal.

           Default: 0

   Plugin "tcpconns"
       The "tcpconns plugin" counts the number of currently established TCP connections based on
       the local port and/or the remote port. Since there may be a lot of connections the default
       if to count all connections with a local port, for which a listening socket is opened. You
       can use the following options to fine-tune the ports you are interested in:

       ListeningPorts true|false
           If this option is set to true, statistics for all local ports for which a listening
           socket exists are collected. The default depends on LocalPort and RemotePort (see
           below): If no port at all is specifically selected, the default is to collect
           listening ports. If specific ports (no matter if local or remote ports) are selected,
           this option defaults to false, i. e. only the selected ports will be collected unless
           this option is set to true specifically.

       LocalPort Port
           Count the connections to a specific local port. This can be used to see how many
           connections are handled by a specific daemon, e. g. the mailserver.  You have to
           specify the port in numeric form, so for the mailserver example you'd need to set 25.

       RemotePort Port
           Count the connections to a specific remote port. This is useful to see how much a
           remote service is used. This is most useful if you want to know how many connections a
           local service has opened to remote services, e. g. how many connections a mail server
           or news server has to other mail or news servers, or how many connections a web proxy
           holds to web servers. You have to give the port in numeric form.

       AllPortsSummary true|false
           If this option is set to true a summary of statistics from all connections are
           collectd. This option defaults to false.

   Plugin "thermal"
       ForceUseProcfs true|false
           By default, the Thermal plugin tries to read the statistics from the Linux "sysfs"
           interface. If that is not available, the plugin falls back to the "procfs" interface.
           By setting this option to true, you can force the plugin to use the latter. This
           option defaults to false.

       Device Device
           Selects the name of the thermal device that you want to collect or ignore, depending
           on the value of the IgnoreSelected option. This option may be used multiple times to
           specify a list of devices.

       IgnoreSelected true|false
           Invert the selection: If set to true, all devices except the ones that match the
           device names specified by the Device option are collected. By default only selected
           devices are collected if a selection is made. If no selection is configured at all,
           all devices are selected.

   Plugin "threshold"
       The Threshold plugin checks values collected or received by collectd against a
       configurable threshold and issues notifications if values are out of bounds.

       Documentation for this plugin is available in the collectd-threshold(5) manual page.

   Plugin "tokyotyrant"
       The TokyoTyrant plugin connects to a TokyoTyrant server and collects a couple metrics:
       number of records, and database size on disk.

       Host Hostname/IP
           The hostname or ip which identifies the server.  Default: 127.0.0.1

       Port Service/Port
           The query port of the server. This needs to be a string, even if the port is given in
           its numeric form.  Default: 1978

   Plugin "turbostat"
       The Turbostat plugin reads CPU frequency and C-state residency on modern Intel processors
       by using the new Model Specific Registers.

       CoreCstates Bitmask(Integer)
           Bitmask of the list of core C states supported by the processor.  This option should
           only be used if the automated detection fails.  Default value extracted from the cpu
           model and family.

           Currently supported C-states (by this plugin): 3, 6, 7

           Example: (1<<3)+(1<<6)+(1<<7) = 392 for all states

       PackageCstates Bitmask(Integer)
           Bitmask of the list of pacages C states supported by the processor.  This option
           should only be used if the automated detection fails.  Default value extracted from
           the cpu model and family.

           Currently supported C-states (by this plugin): 2, 3, 6, 7, 8, 9, 10

           Example: (1<<2)+(1<<3)+(1<<6)+(1<<7) = 396 for states 2, 3, 6 and 7

       SystemManagementInterrupt true|false
           Boolean enabling the collection of the I/O System-Management Interrupt counter'. This
           option should only be used if the automated detection fails or if you want to disable
           this feature.

       DigitalTemperatureSensor true|false
           Boolean enabling the collection of the temperature of each core.  This option should
           only be used if the automated detectionfails or if you want to disable this feature.

       DigitalTemperatureSensor true|false
           Boolean enabling the collection of the temperature of each package.  This option
           should only be used if the automated detectionfails or if you want to disable this
           feature.

       TCCActivationTemp Temperature
           Thermal Control Circuit Activation Temperature of the installed CPU. This temperature
           is used when collecting the temperature of cores or packages. This option should only
           be used if the automated detection fails. Default value extracted from
           MSR_IA32_TEMPERATURE_TARGET

       RunningAveragePowerLimit Bitmask(Integer)
           Bitmask of the list of elements to be thermally monitored. This option should only be
           used if the automated detection fails or if you want to disable some collections. The
           different bits of this bitmask accepted by this plugin are:

           0 ('1'): Package
           1 ('2'): DRAM
           2 ('4'): Cores
           3 ('8'): Embedded graphic device

   Plugin "unixsock"
       SocketFile Path
           Sets the socket-file which is to be created.

       SocketGroup Group
           If running as root change the group of the UNIX-socket after it has been created.
           Defaults to collectd.

       SocketPerms Permissions
           Change the file permissions of the UNIX-socket after it has been created. The
           permissions must be given as a numeric, octal value as you would pass to chmod(1).
           Defaults to 0770.

       DeleteSocket false|true
           If set to true, delete the socket file before calling bind(2), if a file with the
           given name already exists. If collectd crashes a socket file may be left over,
           preventing the daemon from opening a new socket when restarted.  Since this is
           potentially dangerous, this defaults to false.

   Plugin "uuid"
       This plugin, if loaded, causes the Hostname to be taken from the machine's UUID. The UUID
       is a universally unique designation for the machine, usually taken from the machine's
       BIOS. This is most useful if the machine is running in a virtual environment such as Xen,
       in which case the UUID is preserved across shutdowns and migration.

       The following methods are used to find the machine's UUID, in order:

       ·   Check /etc/uuid (or UUIDFile).

       ·   Check for UUID from HAL (<http://www.freedesktop.org/wiki/Software/hal>) if present.

       ·   Check for UUID from "dmidecode" / SMBIOS.

       ·   Check for UUID from Xen hypervisor.

       If no UUID can be found then the hostname is not modified.

       UUIDFile Path
           Take the UUID from the given file (default /etc/uuid).

   Plugin "varnish"
       The varnish plugin collects information about Varnish, an HTTP accelerator.  It collects a
       subset of the values displayed by varnishstat(1), and organizes them in categories which
       can be enabled or disabled. Currently only metrics shown in varnishstat(1)'s MAIN section
       are collected. The exact meaning of each metric can be found in varnish-counters(7).

       Synopsis:

        <Plugin "varnish">
          <Instance "example">
            CollectBackend     true
            CollectBan         false
            CollectCache       true
            CollectConnections true
            CollectDirectorDNS false
            CollectESI         false
            CollectFetch       false
            CollectHCB         false
            CollectObjects     false
            CollectPurge       false
            CollectSession     false
            CollectSHM         true
            CollectSMA         false
            CollectSMS         false
            CollectSM          false
            CollectStruct      false
            CollectTotals      false
            CollectUptime      false
            CollectVCL         false
            CollectVSM         false
            CollectWorkers     false
          </Instance>
        </Plugin>

       The configuration consists of one or more <Instance Name> blocks. Name is the parameter
       passed to "varnishd -n". If left empty, it will collectd statistics from the default
       "varnishd" instance (this should work fine in most cases).

       Inside each <Instance> blocks, the following options are recognized:

       CollectBackend true|false
           Back-end connection statistics, such as successful, reused, and closed connections.
           True by default.

       CollectBan true|false
           Statistics about ban operations, such as number of bans added, retired, and number of
           objects tested against ban operations. Only available with Varnish 3.x and above.
           False by default.

       CollectCache true|false
           Cache hits and misses. True by default.

       CollectConnections true|false
           Number of client connections received, accepted and dropped. True by default.

       CollectDirectorDNS true|false
           DNS director lookup cache statistics. Only available with Varnish 3.x. False by
           default.

       CollectESI true|false
           Edge Side Includes (ESI) parse statistics. False by default.

       CollectFetch true|false
           Statistics about fetches (HTTP requests sent to the backend). False by default.

       CollectHCB true|false
           Inserts and look-ups in the crit bit tree based hash. Look-ups are divided into locked
           and unlocked look-ups. False by default.

       CollectObjects true|false
           Statistics on cached objects: number of objects expired, nuked (prematurely expired),
           saved, moved, etc. False by default.

       CollectPurge true|false
           Statistics about purge operations, such as number of purges added, retired, and number
           of objects tested against purge operations. Only available with Varnish 2.x. False by
           default.

       CollectSession true|false
           Client session statistics. Number of past and current sessions, session herd and
           linger counters, etc. False by default. Note that if using Varnish 4.x, some metrics
           found in the Connections and Threads sections with previous versions of Varnish have
           been moved here.

       CollectSHM true|false
           Statistics about the shared memory log, a memory region to store log messages which is
           flushed to disk when full. True by default.

       CollectSMA true|false
           malloc or umem (umem_alloc(3MALLOC) based) storage statistics. The umem storage
           component is Solaris specific. Only available with Varnish 2.x. False by default.

       CollectSMS true|false
           synth (synthetic content) storage statistics. This storage component is used
           internally only. False by default.

       CollectSM true|false
           file (memory mapped file) storage statistics. Only available with Varnish 2.x.  False
           by default.

       CollectStruct true|false
           Current varnish internal state statistics. Number of current sessions, objects in
           cache store, open connections to backends (with Varnish 2.x), etc. False by default.

       CollectTotals true|false
           Collects overview counters, such as the number of sessions created, the number of
           requests and bytes transferred. False by default.

       CollectUptime true|false
           Varnish uptime. Only available with Varnish 3.x and above. False by default.

       CollectVCL true|false
           Number of total (available + discarded) VCL (config files). False by default.

       CollectVSM true|false
           Collect statistics about Varnish's shared memory usage (used by the logging and
           statistics subsystems). Only available with Varnish 4.x. False by default.

       CollectWorkers true|false
           Collect statistics about worker threads. False by default.

   Plugin "virt"
       This plugin allows CPU, disk and network load to be collected for virtualized guests on
       the machine. This means that these metrics can be collected for guest systems without
       installing any software on them - collectd only runs on the host system. The statistics
       are collected through libvirt (<http://libvirt.org/>).

       Only Connection is required.

       Connection uri
           Connect to the hypervisor given by uri. For example if using Xen use:

            Connection "xen:///"

           Details which URIs allowed are given at <http://libvirt.org/uri.html>.

       RefreshInterval seconds
           Refresh the list of domains and devices every seconds. The default is 60 seconds.
           Setting this to be the same or smaller than the Interval will cause the list of
           domains and devices to be refreshed on every iteration.

           Refreshing the devices in particular is quite a costly operation, so if your
           virtualization setup is static you might consider increasing this. If this option is
           set to 0, refreshing is disabled completely.

       Domain name
       BlockDevice name:dev
       InterfaceDevice name:dev
       IgnoreSelected true|false
           Select which domains and devices are collected.

           If IgnoreSelected is not given or false then only the listed domains and disk/network
           devices are collected.

           If IgnoreSelected is true then the test is reversed and the listed domains and
           disk/network devices are ignored, while the rest are collected.

           The domain name and device names may use a regular expression, if the name is
           surrounded by /.../ and collectd was compiled with support for regexps.

           The default is to collect statistics for all domains and all their devices.

           Example:

            BlockDevice "/:hdb/"
            IgnoreSelected "true"

           Ignore all hdb devices on any domain, but other block devices (eg. hda) will be
           collected.

       HostnameFormat name|uuid|hostname|...
           When the virt plugin logs data, it sets the hostname of the collected data according
           to this setting. The default is to use the guest name as provided by the hypervisor,
           which is equal to setting name.

           uuid means use the guest's UUID. This is useful if you want to track the same guest
           across migrations.

           hostname means to use the global Hostname setting, which is probably not useful on its
           own because all guests will appear to have the same name.

           You can also specify combinations of these fields. For example name uuid means to
           concatenate the guest name and UUID (with a literal colon character between, thus
           "foo:1234-1234-1234-1234").

           At the moment of writing (collectd-5.5), hostname string is limited to 62 characters.
           In case when combination of fields exceeds 62 characters, hostname will be truncated
           without a warning.

       InterfaceFormat name|address
           When the virt plugin logs interface data, it sets the name of the collected data
           according to this setting. The default is to use the path as provided by the
           hypervisor (the "dev" property of the target node), which is equal to setting name.

           address means use the interface's mac address. This is useful since the interface path
           might change between reboots of a guest or across migrations.

       PluginInstanceFormat name|uuid
           When the virt plugin logs data, it sets the plugin_instance of the collected data
           according to this setting. The default is to use the guest name as provided by the
           hypervisor, which is equal to setting name.

           uuid means use the guest's UUID.

           You can also specify combinations of these fields. For example name uuid means to
           concatenate the guest name and UUID (with a literal colon character between, thus
           "foo:1234-1234-1234-1234").

   Plugin "vmem"
       The "vmem" plugin collects information about the usage of virtual memory.  Since the
       statistics provided by the Linux kernel are very detailed, they are collected very
       detailed. However, to get all the details, you have to switch them on manually. Most
       people just want an overview over, such as the number of pages read from swap space.

       Verbose true|false
           Enables verbose collection of information. This will start collecting page "actions",
           e. g. page allocations, (de)activations, steals and so on.  Part of these statistics
           are collected on a "per zone" basis.

   Plugin "vserver"
       This plugin doesn't have any options. VServer support is only available for Linux. It
       cannot yet be found in a vanilla kernel, though. To make use of this plugin you need a
       kernel that has VServer support built in, i. e. you need to apply the patches and compile
       your own kernel, which will then provide the /proc/virtual filesystem that is required by
       this plugin.

       The VServer homepage can be found at <http://linux-vserver.org/>.

       Note: The traffic collected by this plugin accounts for the amount of traffic passing a
       socket which might be a lot less than the actual on-wire traffic (e. g. due to headers and
       retransmission). If you want to collect on-wire traffic you could, for example, use the
       logging facilities of iptables to feed data for the guest IPs into the iptables plugin.

   Plugin "write_graphite"
       The "write_graphite" plugin writes data to Graphite, an open-source metrics storage and
       graphing project. The plugin connects to Carbon, the data layer of Graphite, via TCP or
       UDP and sends data via the "line based" protocol (per default using port 2003). The data
       will be sent in blocks of at most 1428 bytes to minimize the number of network packets.

       Synopsis:

        <Plugin write_graphite>
          <Node "example">
            Host "localhost"
            Port "2003"
            Protocol "tcp"
            LogSendErrors true
            Prefix "collectd"
          </Node>
        </Plugin>

       The configuration consists of one or more <Node Name> blocks. Inside the Node blocks, the
       following options are recognized:

       Host Address
           Hostname or address to connect to. Defaults to "localhost".

       Port Service
           Service name or port number to connect to. Defaults to 2003.

       Protocol String
           Protocol to use when connecting to Graphite. Defaults to "tcp".

       LogSendErrors false|true
           If set to true (the default), logs errors when sending data to Graphite.  If set to
           false, it will not log the errors. This is especially useful when using Protocol UDP
           since many times we want to use the "fire-and-forget" approach and logging errors
           fills syslog with unneeded messages.

       Prefix String
           When set, String is added in front of the host name. Dots and whitespace are not
           escaped in this string (see EscapeCharacter below).

       Postfix String
           When set, String is appended to the host name. Dots and whitespace are not escaped in
           this string (see EscapeCharacter below).

       EscapeCharacter Char
           Carbon uses the dot (".") as escape character and doesn't allow whitespace in the
           identifier. The EscapeCharacter option determines which character dots, whitespace and
           control characters are replaced with. Defaults to underscore ("_").

       StoreRates false|true
           If set to true (the default), convert counter values to rates. If set to false counter
           values are stored as is, i. e. as an increasing integer number.

       SeparateInstances false|true
           If set to true, the plugin instance and type instance will be in their own path
           component, for example "host.cpu.0.cpu.idle". If set to false (the default), the
           plugin and plugin instance (and likewise the type and type instance) are put into one
           component, for example "host.cpu-0.cpu-idle".

       AlwaysAppendDS false|true
           If set to true, append the name of the Data Source (DS) to the "metric" identifier. If
           set to false (the default), this is only done when there is more than one DS.

   Plugin "write_tsdb"
       The "write_tsdb" plugin writes data to OpenTSDB, a scalable open-source time series
       database. The plugin connects to a TSD, a masterless, no shared state daemon that ingests
       metrics and stores them in HBase. The plugin uses TCP over the "line based" protocol with
       a default port 4242. The data will be sent in blocks of at most 1428 bytes to minimize the
       number of network packets.

       Synopsis:

        <Plugin write_tsdb>
          <Node "example">
            Host "tsd-1.my.domain"
            Port "4242"
            HostTags "status=production"
          </Node>
        </Plugin>

       The configuration consists of one or more <Node Name> blocks. Inside the Node blocks, the
       following options are recognized:

       Host Address
           Hostname or address to connect to. Defaults to "localhost".

       Port Service
           Service name or port number to connect to. Defaults to 4242.

       HostTags String
           When set, HostTags is added to the end of the metric. It is intended to be used for
           name=value pairs that the TSD will tag the metric with. Dots and whitespace are not
           escaped in this string.

       StoreRates false|true
           If set to true, convert counter values to rates. If set to false (the default) counter
           values are stored as is, as an increasing integer number.

       AlwaysAppendDS false|true
           If set the true, append the name of the Data Source (DS) to the "metric" identifier.
           If set to false (the default), this is only done when there is more than one DS.

   Plugin "write_mongodb"
       The write_mongodb plugin will send values to MongoDB, a schema-less NoSQL database.

       Synopsis:

        <Plugin "write_mongodb">
          <Node "default">
            Host "localhost"
            Port "27017"
            Timeout 1000
            StoreRates true
          </Node>
        </Plugin>

       The plugin can send values to multiple instances of MongoDB by specifying one Node block
       for each instance. Within the Node blocks, the following options are available:

       Host Address
           Hostname or address to connect to. Defaults to "localhost".

       Port Service
           Service name or port number to connect to. Defaults to 27017.

       Timeout Milliseconds
           Set the timeout for each operation on MongoDB to Timeout milliseconds.  Setting this
           option to zero means no timeout, which is the default.

       StoreRates false|true
           If set to true (the default), convert counter values to rates. If set to false counter
           values are stored as is, i.e. as an increasing integer number.

       Database Database
       User User
       Password Password
           Sets the information used when authenticating to a MongoDB database. The fields are
           optional (in which case no authentication is attempted), but if you want to use
           authentication all three fields must be set.

   Plugin "write_http"
       This output plugin submits values to an HTTP server using POST requests and encoding
       metrics with JSON or using the "PUTVAL" command described in collectd-unixsock(5).

       Synopsis:

        <Plugin "write_http">
          <Node "example">
            URL "http://example.com/post-collectd"
            User "collectd"
            Password "weCh3ik0"
            Format JSON
          </Node>
        </Plugin>

       The plugin can send values to multiple HTTP servers by specifying one <Node Name> block
       for each server. Within each Node block, the following options are available:

       URL URL
           URL to which the values are submitted to. Mandatory.

       User Username
           Optional user name needed for authentication.

       Password Password
           Optional password needed for authentication.

       VerifyPeer true|false
           Enable or disable peer SSL certificate verification. See
           <http://curl.haxx.se/docs/sslcerts.html> for details. Enabled by default.

       VerifyHost true|false
           Enable or disable peer host name verification. If enabled, the plugin checks if the
           "Common Name" or a "Subject Alternate Name" field of the SSL certificate matches the
           host name provided by the URL option. If this identity check fails, the connection is
           aborted. Obviously, only works when connecting to a SSL enabled server. Enabled by
           default.

       CACert File
           File that holds one or more SSL certificates. If you want to use HTTPS you will
           possibly need this option. What CA certificates come bundled with "libcurl" and are
           checked by default depends on the distribution you use.

       CAPath Directory
           Directory holding one or more CA certificate files. You can use this if for some
           reason all the needed CA certificates aren't in the same file and can't be pointed to
           using the CACert option. Requires "libcurl" to be built against OpenSSL.

       ClientKey File
           File that holds the private key in PEM format to be used for certificate-based
           authentication.

       ClientCert File
           File that holds the SSL certificate to be used for certificate-based authentication.

       ClientKeyPass Password
           Password required to load the private key in ClientKey.

       SSLVersion SSLv2|SSLv3|TLSv1|TLSv1_0|TLSv1_1|TLSv1_2
           Define which SSL protocol version must be used. By default "libcurl" will attempt to
           figure out the remote SSL protocol version. See curl_easy_setopt(3) for more details.

       Format Command|JSON
           Format of the output to generate. If set to Command, will create output that is
           understood by the Exec and UnixSock plugins. When set to JSON, will create output in
           the JavaScript Object Notation (JSON).

           Defaults to Command.

       StoreRates true|false
           If set to true, convert counter values to rates. If set to false (the default) counter
           values are stored as is, i.e. as an increasing integer number.

       BufferSize Bytes
           Sets the send buffer size to Bytes. By increasing this buffer, less HTTP requests will
           be generated, but more metrics will be batched / metrics are cached for longer before
           being sent, introducing additional delay until they are available on the server side.
           Bytes must be at least 1024 and cannot exceed the size of an "int", i.e. 2 GByte.
           Defaults to 4096.

       LowSpeedLimit Bytes per Second
           Sets the minimal transfer rate in Bytes per Second below which the connection with the
           HTTP server will be considered too slow and aborted. All the data submitted over this
           connection will probably be lost. Defaults to 0, which means no minimum transfer rate
           is enforced.

       Timeout Timeout
           Sets the maximum time in milliseconds given for HTTP POST operations to complete. When
           this limit is reached, the POST operation will be aborted, and all the data in the
           current send buffer will probably be lost. Defaults to 0, which means the connection
           never times out.

           The "write_http" plugin regularly submits the collected values to the HTTP server. How
           frequently this happens depends on how much data you are collecting and the size of
           BufferSize. The optimal value to set Timeout to is slightly below this interval, which
           you can estimate by monitoring the network traffic between collectd and the HTTP
           server.

   Plugin "write_kafka"
       The write_kafka plugin will send values to a Kafka topic, a distributed queue.  Synopsis:

        <Plugin "write_kafka">
          Property "metadata.broker.list" "broker1:9092,broker2:9092"
          <Topic "collectd">
            Format JSON
          </Topic>
        </Plugin>

       The following options are understood by the write_kafka plugin:

       <Topic Name>
           The plugin's configuration consists of one or more Topic blocks. Each block is given a
           unique Name and specifies one kafka producer.  Inside the Topic block, the following
           per-topic options are understood:

           Property String String
               Configure the named property for the current topic. Properties are forwarded to
               the kafka producer library librdkafka.

           Key String
               Use the specified string as a partioning key for the topic. Kafka breaks topic
               into partitions and guarantees that for a given topology, the same consumer will
               be used for a specific key. The special (case insensitive) string Random can be
               used to specify that an arbitrary partition should be used.

           Format Command|JSON|Graphite
               Selects the format in which messages are sent to the broker. If set to Command
               (the default), values are sent as "PUTVAL" commands which are identical to the
               syntax used by the Exec and UnixSock plugins.

               If set to JSON, the values are encoded in the JavaScript Object Notation, an easy
               and straight forward exchange format.

               If set to Graphite, values are encoded in the Graphite format, which is "<metric>
               <value> <timestamp>\n".

           StoreRates true|false
               Determines whether or not "COUNTER", "DERIVE" and "ABSOLUTE" data sources are
               converted to a rate (i.e. a "GAUGE" value). If set to false (the default), no
               conversion is performed. Otherwise the conversion is performed using the internal
               value cache.

               Please note that currently this option is only used if the Format option has been
               set to JSON.

           GraphitePrefix (Format=Graphite only)
               A prefix can be added in the metric name when outputting in the Graphite format.
               It's added before the Host name.  Metric name will be
               "<prefix><host><postfix><plugin><type><name>"

           GraphitePostfix (Format=Graphite only)
               A postfix can be added in the metric name when outputting in the Graphite format.
               It's added after the Host name.  Metric name will be
               "<prefix><host><postfix><plugin><type><name>"

           GraphiteEscapeChar (Format=Graphite only)
               Specify a character to replace dots (.) in the host part of the metric name.  In
               Graphite metric name, dots are used as separators between different metric parts
               (host, plugin, type).  Default is "_" (Underscore).

           GraphiteSeparateInstances false|true
               If set to true, the plugin instance and type instance will be in their own path
               component, for example "host.cpu.0.cpu.idle". If set to false (the default), the
               plugin and plugin instance (and likewise the type and type instance) are put into
               one component, for example "host.cpu-0.cpu-idle".

           StoreRates true|false
               If set to true (the default), convert counter values to rates. If set to false
               counter values are stored as is, i.e. as an increasing integer number.

               This will be reflected in the "ds_type" tag: If StoreRates is enabled, converted
               values will have "rate" appended to the data source type, e.g.
               "ds_type:derive:rate".

       Property String String
           Configure the kafka producer through properties, you almost always will want to set
           metadata.broker.list to your Kafka broker list.

   Plugin "write_redis"
       The write_redis plugin submits values to Redis, a data structure server.

       Synopsis:

         <Plugin "write_redis">
           <Node "example">
               Host "localhost"
               Port "6379"
               Timeout 1000
           </Node>
         </Plugin>

       Values are submitted to Sorted Sets, using the metric name as the key, and the timestamp
       as the score. Retrieving a date range can then be done using the "ZRANGEBYSCORE" Redis
       command. Additionally, all the identifiers of these Sorted Sets are kept in a Set called
       "collectd/values" and can be retrieved using the "SMEMBERS" Redis command. See
       <http://redis.io/commands#sorted_set> and <http://redis.io/commands#set> for details.

       The information shown in the synopsis above is the default configuration which is used by
       the plugin if no configuration is present.

       The plugin can send values to multiple instances of Redis by specifying one Node block for
       each instance. Within the Node blocks, the following options are available:

       Node Nodename
           The Node block identifies a new Redis node, that is a new Redis instance running on a
           specified host and port. The node name is a canonical identifier which is used as
           plugin instance. It is limited to 51 characters in length.

       Host Hostname
           The Host option is the hostname or IP-address where the Redis instance is running on.

       Port Port
           The Port option is the TCP port on which the Redis instance accepts connections.
           Either a service name of a port number may be given. Please note that numerical port
           numbers must be given as a string, too.

       Timeout Milliseconds
           The Timeout option sets the socket connection timeout, in milliseconds.

   Plugin "write_riemann"
       The write_riemann plugin will send values to Riemann, a powerful stream aggregation and
       monitoring system. The plugin sends Protobuf encoded data to Riemann using UDP packets.

       Synopsis:

        <Plugin "write_riemann">
          <Node "example">
            Host "localhost"
            Port "5555"
            Protocol UDP
            StoreRates true
            AlwaysAppendDS false
            TTLFactor 2.0
          </Node>
          Tag "foobar"
          Attribute "foo" "bar"
        </Plugin>

       The following options are understood by the write_riemann plugin:

       <Node Name>
           The plugin's configuration consists of one or more Node blocks. Each block is given a
           unique Name and specifies one connection to an instance of Riemann. Indise the Node
           block, the following per-connection options are understood:

           Host Address
               Hostname or address to connect to. Defaults to "localhost".

           Port Service
               Service name or port number to connect to. Defaults to 5555.

           Protocol UDP|TCP
               Specify the protocol to use when communicating with Riemann. Defaults to TCP.

           Batch true|false
               If set to true and Protocol is set to TCP, events will be batched in memory and
               flushed at regular intervals or when BatchMaxSize is exceeded.

               Notifications are not batched and sent as soon as possible.

               When enabled, it can occur that events get processed by the Riemann server close
               to or after their expiration time. Tune the TTLFactor and BatchMaxSize settings
               according to the amount of values collected, if this is an issue.

               Defaults to true

           BatchMaxSize size
               Maximum payload size for a riemann packet. Defaults to 8192

           StoreRates true|false
               If set to true (the default), convert counter values to rates. If set to false
               counter values are stored as is, i.e. as an increasing integer number.

               This will be reflected in the "ds_type" tag: If StoreRates is enabled, converted
               values will have "rate" appended to the data source type, e.g.
               "ds_type:derive:rate".

           AlwaysAppendDS false|true
               If set to true, append the name of the Data Source (DS) to the "service", i.e. the
               field that, together with the "host" field, uniquely identifies a metric in
               Riemann. If set to false (the default), this is only done when there is more than
               one DS.

           TTLFactor Factor
               Riemann events have a Time to Live (TTL) which specifies how long each event is
               considered active. collectd populates this field based on the metrics interval
               setting. This setting controls the factor with which the interval is multiplied to
               set the TTL. The default value is 2.0. Unless you know exactly what you're doing,
               you should only increase this setting from its default value.

           Notifications false|true
               If set to true, create riemann events for notifications. This is true by default.
               When processing thresholds from write_riemann, it might prove useful to avoid
               getting notification events.

           CheckThresholds false|true
               If set to true, attach state to events based on thresholds defined in the
               Threshold plugin. Defaults to false.

           EventServicePrefix String
               Add the given string as a prefix to the event service name.  If EventServicePrefix
               not set or set to an empty string (""), no prefix will be used.

       Tag String
           Add the given string as an additional tag to the metric being sent to Riemann.

       Attribute String String
           Consider the two given strings to be the key and value of an additional attribute for
           each metric being sent out to Riemann.

   Plugin "write_sensu"
       The write_sensu plugin will send values to Sensu, a powerful stream aggregation and
       monitoring system. The plugin sends JSON encoded data to a local Sensu client using a TCP
       socket.

       At the moment, the write_sensu plugin does not send over a collectd_host parameter so it
       is not possible to use one collectd instance as a gateway for others. Each collectd host
       must pair with one Sensu client.

       Synopsis:

        <Plugin "write_sensu">
          <Node "example">
            Host "localhost"
            Port "3030"
            StoreRates true
            AlwaysAppendDS false
            MetricHandler "influx"
            MetricHandler "default"
            NotificationHandler "flapjack"
            NotificationHandler "howling_monkey"
            Notifications true
          </Node>
          Tag "foobar"
          Attribute "foo" "bar"
        </Plugin>

       The following options are understood by the write_sensu plugin:

       <Node Name>
           The plugin's configuration consists of one or more Node blocks. Each block is given a
           unique Name and specifies one connection to an instance of Sensu. Inside the Node
           block, the following per-connection options are understood:

           Host Address
               Hostname or address to connect to. Defaults to "localhost".

           Port Service
               Service name or port number to connect to. Defaults to 3030.

           StoreRates true|false
               If set to true (the default), convert counter values to rates. If set to false
               counter values are stored as is, i.e. as an increasing integer number.

               This will be reflected in the "collectd_data_source_type" tag: If StoreRates is
               enabled, converted values will have "rate" appended to the data source type, e.g.
               "collectd_data_source_type:derive:rate".

           AlwaysAppendDS false|true
               If set the true, append the name of the Data Source (DS) to the "service", i.e.
               the field that, together with the "host" field, uniquely identifies a metric in
               Sensu. If set to false (the default), this is only done when there is more than
               one DS.

           Notifications false|true
               If set to true, create Sensu events for notifications. This is false by default.
               At least one of Notifications or Metrics should be enabled.

           Metrics false|true
               If set to true, create Sensu events for metrics. This is false by default. At
               least one of Notifications or Metrics should be enabled.

           Separator String
               Sets the separator for Sensu metrics name or checks. Defaults to "/".

           MetricHandler String
               Add a handler that will be set when metrics are sent to Sensu. You can add several
               of them, one per line. Defaults to no handler.

           NotificationHandler String
               Add a handler that will be set when notifications are sent to Sensu. You can add
               several of them, one per line. Defaults to no handler.

           EventServicePrefix String
               Add the given string as a prefix to the event service name.  If EventServicePrefix
               not set or set to an empty string (""), no prefix will be used.

       Tag String
           Add the given string as an additional tag to the metric being sent to Sensu.

       Attribute String String
           Consider the two given strings to be the key and value of an additional attribute for
           each metric being sent out to Sensu.

   Plugin "zookeeper"
       The zookeeper plugin will collect statistics from a Zookeeper server using the mntr
       command.  It requires Zookeeper 3.4.0+ and access to the client port.

       Synopsis:

        <Plugin "zookeeper">
          Host "127.0.0.1"
          Port "2181"
        </Plugin>

       Host Address
           Hostname or address to connect to. Defaults to "localhost".

       Port Service
           Service name or port number to connect to. Defaults to 2181.

THRESHOLD CONFIGURATION

       Starting with version 4.3.0 collectd has support for monitoring. By that we mean that the
       values are not only stored or sent somewhere, but that they are judged and, if a problem
       is recognized, acted upon. The only action collectd takes itself is to generate and
       dispatch a "notification". Plugins can register to receive notifications and perform
       appropriate further actions.

       Since systems and what you expect them to do differ a lot, you can configure thresholds
       for your values freely. This gives you a lot of flexibility but also a lot of
       responsibility.

       Every time a value is out of range a notification is dispatched. This means that the idle
       percentage of your CPU needs to be less then the configured threshold only once for a
       notification to be generated. There's no such thing as a moving average or similar - at
       least not now.

       Also, all values that match a threshold are considered to be relevant or "interesting". As
       a consequence collectd will issue a notification if they are not received for Timeout
       iterations. The Timeout configuration option is explained in section "GLOBAL OPTIONS". If,
       for example, Timeout is set to "2" (the default) and some hosts sends it's CPU statistics
       to the server every 60 seconds, a notification will be dispatched after about 120 seconds.
       It may take a little longer because the timeout is checked only once each Interval on the
       server.

       When a value comes within range again or is received after it was missing, an "OKAY-
       notification" is dispatched.

       Here is a configuration example to get you started. Read below for more information.

        <Plugin threshold>
          <Type "foo">
            WarningMin    0.00
            WarningMax 1000.00
            FailureMin    0.00
            FailureMax 1200.00
            Invert false
            Instance "bar"
          </Type>

          <Plugin "interface">
            Instance "eth0"
            <Type "if_octets">
              FailureMax 10000000
              DataSource "rx"
            </Type>
          </Plugin>

          <Host "hostname">
            <Type "cpu">
              Instance "idle"
              FailureMin 10
            </Type>

            <Plugin "memory">
              <Type "memory">
                Instance "cached"
                WarningMin 100000000
              </Type>
            </Plugin>
          </Host>
        </Plugin>

       There are basically two types of configuration statements: The "Host", "Plugin", and
       "Type" blocks select the value for which a threshold should be configured. The "Plugin"
       and "Type" blocks may be specified further using the "Instance" option. You can combine
       the block by nesting the blocks, though they must be nested in the above order, i. e.
       "Host" may contain either "Plugin" and "Type" blocks, "Plugin" may only contain "Type"
       blocks and "Type" may not contain other blocks. If multiple blocks apply to the same value
       the most specific block is used.

       The other statements specify the threshold to configure. They must be included in a "Type"
       block. Currently the following statements are recognized:

       FailureMax Value
       WarningMax Value
           Sets the upper bound of acceptable values. If unset defaults to positive infinity. If
           a value is greater than FailureMax a FAILURE notification will be created. If the
           value is greater than WarningMax but less than (or equal to) FailureMax a WARNING
           notification will be created.

       FailureMin Value
       WarningMin Value
           Sets the lower bound of acceptable values. If unset defaults to negative infinity. If
           a value is less than FailureMin a FAILURE notification will be created. If the value
           is less than WarningMin but greater than (or equal to) FailureMin a WARNING
           notification will be created.

       DataSource DSName
           Some data sets have more than one "data source". Interesting examples are the
           "if_octets" data set, which has received ("rx") and sent ("tx") bytes and the
           "disk_ops" data set, which holds "read" and "write" operations. The system load data
           set, "load", even has three data sources: "shortterm", "midterm", and "longterm".

           Normally, all data sources are checked against a configured threshold. If this is
           undesirable, or if you want to specify different limits for each data source, you can
           use the DataSource option to have a threshold apply only to one data source.

       Invert true|false
           If set to true the range of acceptable values is inverted, i. e.  values between
           FailureMin and FailureMax (WarningMin and WarningMax) are not okay. Defaults to false.

       Persist true|false
           Sets how often notifications are generated. If set to true one notification will be
           generated for each value that is out of the acceptable range. If set to false (the
           default) then a notification is only generated if a value is out of range but the
           previous value was okay.

           This applies to missing values, too: If set to true a notification about a missing
           value is generated once every Interval seconds. If set to false only one such
           notification is generated until the value appears again.

       Percentage true|false
           If set to true, the minimum and maximum values given are interpreted as percentage
           value, relative to the other data sources. This is helpful for example for the "df"
           type, where you may want to issue a warning when less than 5 % of the total space is
           available. Defaults to false.

       Hits Number
           Delay creating the notification until the threshold has been passed Number times. When
           a notification has been generated, or when a subsequent value is inside the threshold,
           the counter is reset. If, for example, a value is collected once every 10 seconds and
           Hits is set to 3, a notification will be dispatched at most once every 30 seconds.

           This is useful when short bursts are not a problem. If, for example, 100% CPU usage
           for up to a minute is normal (and data is collected every 10 seconds), you could set
           Hits to 6 to account for this.

       Hysteresis Number
           When set to non-zero, a hysteresis value is applied when checking minimum and maximum
           bounds. This is useful for values that increase slowly and fluctuate a bit while doing
           so. When these values come close to the threshold, they may "flap", i.e. switch
           between failure / warning case and okay case repeatedly.

           If, for example, the threshold is configures as

             WarningMax 100.0
             Hysteresis 1.0

           then a Warning notification is created when the value exceeds 101 and the
           corresponding Okay notification is only created once the value falls below 99, thus
           avoiding the "flapping".

FILTER CONFIGURATION

       Starting with collectd 4.6 there is a powerful filtering infrastructure implemented in the
       daemon. The concept has mostly been copied from ip_tables, the packet filter
       infrastructure for Linux. We'll use a similar terminology, so that users that are familiar
       with iptables feel right at home.

   Terminology
       The following are the terms used in the remainder of the filter configuration
       documentation. For an ASCII-art schema of the mechanism, see "General structure" below.

       Match
           A match is a criteria to select specific values. Examples are, of course, the name of
           the value or it's current value.

           Matches are implemented in plugins which you have to load prior to using the match.
           The name of such plugins starts with the "match_" prefix.

       Target
           A target is some action that is to be performed with data. Such actions could, for
           example, be to change part of the value's identifier or to ignore the value
           completely.

           Some of these targets are built into the daemon, see "Built-in targets" below. Other
           targets are implemented in plugins which you have to load prior to using the target.
           The name of such plugins starts with the "target_" prefix.

       Rule
           The combination of any number of matches and at least one target is called a rule. The
           target actions will be performed for all values for which all matches apply. If the
           rule does not have any matches associated with it, the target action will be performed
           for all values.

       Chain
           A chain is a list of rules and possibly default targets. The rules are tried in order
           and if one matches, the associated target will be called. If a value is handled by a
           rule, it depends on the target whether or not any subsequent rules are considered or
           if traversal of the chain is aborted, see "Flow control" below. After all rules have
           been checked, the default targets will be executed.

   General structure
       The following shows the resulting structure:

        +---------+
        ! Chain   !
        +---------+
             !
             V
        +---------+  +---------+  +---------+  +---------+
        ! Rule    !->! Match   !->! Match   !->! Target  !
        +---------+  +---------+  +---------+  +---------+
             !
             V
        +---------+  +---------+  +---------+
        ! Rule    !->! Target  !->! Target  !
        +---------+  +---------+  +---------+
             !
             V
             :
             :
             !
             V
        +---------+  +---------+  +---------+
        ! Rule    !->! Match   !->! Target  !
        +---------+  +---------+  +---------+
             !
             V
        +---------+
        ! Default !
        ! Target  !
        +---------+

   Flow control
       There are four ways to control which way a value takes through the filter mechanism:

       jump
           The built-in jump target can be used to "call" another chain, i. e.  process the value
           with another chain. When the called chain finishes, usually the next target or rule
           after the jump is executed.

       stop
           The stop condition, signaled for example by the built-in target stop, causes all
           processing of the value to be stopped immediately.

       return
           Causes processing in the current chain to be aborted, but processing of the value
           generally will continue. This means that if the chain was called via Jump, the next
           target or rule after the jump will be executed. If the chain was not called by another
           chain, control will be returned to the daemon and it may pass the value to another
           chain.

       continue
           Most targets will signal the continue condition, meaning that processing should
           continue normally. There is no special built-in target for this condition.

   Synopsis
       The configuration reflects this structure directly:

        PostCacheChain "PostCache"
        <Chain "PostCache">
          <Rule "ignore_mysql_show">
            <Match "regex">
              Plugin "^mysql$"
              Type "^mysql_command$"
              TypeInstance "^show_"
            </Match>
            <Target "stop">
            </Target>
          </Rule>
          <Target "write">
            Plugin "rrdtool"
          </Target>
        </Chain>

       The above configuration example will ignore all values where the plugin field is "mysql",
       the type is "mysql_command" and the type instance begins with "show_". All other values
       will be sent to the "rrdtool" write plugin via the default target of the chain. Since this
       chain is run after the value has been added to the cache, the MySQL "show_*" command
       statistics will be available via the "unixsock" plugin.

   List of configuration options
       PreCacheChain ChainName
       PostCacheChain ChainName
           Configure the name of the "pre-cache chain" and the "post-cache chain". The argument
           is the name of a chain that should be executed before and/or after the values have
           been added to the cache.

           To understand the implications, it's important you know what is going on inside
           collectd. The following diagram shows how values are passed from the read-plugins to
           the write-plugins:

              +---------------+
              !  Read-Plugin  !
              +-------+-------+
                      !
            + - - - - V - - - - +
            : +---------------+ :
            : !   Pre-Cache   ! :
            : !     Chain     ! :
            : +-------+-------+ :
            :         !         :
            :         V         :
            : +-------+-------+ :  +---------------+
            : !     Cache     !--->!  Value Cache  !
            : !     insert    ! :  +---+---+-------+
            : +-------+-------+ :      !   !
            :         !   ,------------'   !
            :         V   V     :          V
            : +-------+---+---+ :  +-------+-------+
            : !  Post-Cache   +--->! Write-Plugins !
            : !     Chain     ! :  +---------------+
            : +---------------+ :
            :                   :
            :  dispatch values  :
            + - - - - - - - - - +

           After the values are passed from the "read" plugins to the dispatch functions, the
           pre-cache chain is run first. The values are added to the internal cache afterwards.
           The post-cache chain is run after the values have been added to the cache. So why is
           it such a huge deal if chains are run before or after the values have been added to
           this cache?

           Targets that change the identifier of a value list should be executed before the
           values are added to the cache, so that the name in the cache matches the name that is
           used in the "write" plugins. The "unixsock" plugin, too, uses this cache to receive a
           list of all available values. If you change the identifier after the value list has
           been added to the cache, this may easily lead to confusion, but it's not forbidden of
           course.

           The cache is also used to convert counter values to rates. These rates are, for
           example, used by the "value" match (see below). If you use the rate stored in the
           cache before the new value is added, you will use the old, previous rate. Write
           plugins may use this rate, too, see the "csv" plugin, for example.  The "unixsock"
           plugin uses these rates too, to implement the "GETVAL" command.

           Last but not last, the stop target makes a difference: If the pre-cache chain returns
           the stop condition, the value will not be added to the cache and the post-cache chain
           will not be run.

       Chain Name
           Adds a new chain with a certain name. This name can be used to refer to a specific
           chain, for example to jump to it.

           Within the Chain block, there can be Rule blocks and Target blocks.

       Rule [Name]
           Adds a new rule to the current chain. The name of the rule is optional and currently
           has no meaning for the daemon.

           Within the Rule block, there may be any number of Match blocks and there must be at
           least one Target block.

       Match Name
           Adds a match to a Rule block. The name specifies what kind of match should be
           performed. Available matches depend on the plugins that have been loaded.

           The arguments inside the Match block are passed to the plugin implementing the match,
           so which arguments are valid here depends on the plugin being used.  If you do not
           need any to pass any arguments to a match, you can use the shorter syntax:

            Match "foobar"

           Which is equivalent to:

            <Match "foobar">
            </Match>

       Target Name
           Add a target to a rule or a default target to a chain. The name specifies what kind of
           target is to be added. Which targets are available depends on the plugins being
           loaded.

           The arguments inside the Target block are passed to the plugin implementing the
           target, so which arguments are valid here depends on the plugin being used.  If you do
           not need any to pass any arguments to a target, you can use the shorter syntax:

            Target "stop"

           This is the same as writing:

            <Target "stop">
            </Target>

   Built-in targets
       The following targets are built into the core daemon and therefore need no plugins to be
       loaded:

       return
           Signals the "return" condition, see the "Flow control" section above. This causes the
           current chain to stop processing the value and returns control to the calling chain.
           The calling chain will continue processing targets and rules just after the jump
           target (see below). This is very similar to the RETURN target of iptables, see
           iptables(8).

           This target does not have any options.

           Example:

            Target "return"

       stop
           Signals the "stop" condition, see the "Flow control" section above. This causes
           processing of the value to be aborted immediately. This is similar to the DROP target
           of iptables, see iptables(8).

           This target does not have any options.

           Example:

            Target "stop"

       write
           Sends the value to "write" plugins.

           Available options:

           Plugin Name
               Name of the write plugin to which the data should be sent. This option may be
               given multiple times to send the data to more than one write plugin. If the plugin
               supports multiple instances, the plugin's instance(s) must also be specified.

           If no plugin is explicitly specified, the values will be sent to all available write
           plugins.

           Single-instance plugin example:

            <Target "write">
              Plugin "rrdtool"
            </Target>

           Multi-instance plugin example:

            <Plugin "write_graphite">
              <Node "foo">
              ...
              </Node>
              <Node "bar">
              ...
              </Node>
            </Plugin>
             ...
            <Target "write">
              Plugin "write_graphite/foo"
            </Target>

       jump
           Starts processing the rules of another chain, see "Flow control" above. If the end of
           that chain is reached, or a stop condition is encountered, processing will continue
           right after the jump target, i. e. with the next target or the next rule. This is
           similar to the -j command line option of iptables, see iptables(8).

           Available options:

           Chain Name
               Jumps to the chain Name. This argument is required and may appear only once.

           Example:

            <Target "jump">
              Chain "foobar"
            </Target>

   Available matches
       regex
           Matches a value using regular expressions.

           Available options:

           Host Regex
           Plugin Regex
           PluginInstance Regex
           Type Regex
           TypeInstance Regex
               Match values where the given regular expressions match the various fields of the
               identifier of a value. If multiple regular expressions are given, all regexen must
               match for a value to match.

           Invert false|true
               When set to true, the result of the match is inverted, i.e. all value lists where
               all regular expressions apply are not matched, all other value lists are matched.
               Defaults to false.

           Example:

            <Match "regex">
              Host "customer[0-9]+"
              Plugin "^foobar$"
            </Match>

       timediff
           Matches values that have a time which differs from the time on the server.

           This match is mainly intended for servers that receive values over the "network"
           plugin and write them to disk using the "rrdtool" plugin. RRDtool is very sensitive to
           the timestamp used when updating the RRD files. In particular, the time must be ever
           increasing. If a misbehaving client sends one packet with a timestamp far in the
           future, all further packets with a correct time will be ignored because of that one
           packet. What's worse, such corrupted RRD files are hard to fix.

           This match lets one match all values outside a specified time range (relative to the
           server's time), so you can use the stop target (see below) to ignore the value, for
           example.

           Available options:

           Future Seconds
               Matches all values that are ahead of the server's time by Seconds or more seconds.
               Set to zero for no limit. Either Future or Past must be non-zero.

           Past Seconds
               Matches all values that are behind of the server's time by Seconds or more
               seconds. Set to zero for no limit. Either Future or Past must be non-zero.

           Example:

            <Match "timediff">
              Future  300
              Past   3600
            </Match>

           This example matches all values that are five minutes or more ahead of the server or
           one hour (or more) lagging behind.

       value
           Matches the actual value of data sources against given minimum / maximum values. If a
           data-set consists of more than one data-source, all data-sources must match the
           specified ranges for a positive match.

           Available options:

           Min Value
               Sets the smallest value which still results in a match. If unset, behaves like
               negative infinity.

           Max Value
               Sets the largest value which still results in a match. If unset, behaves like
               positive infinity.

           Invert true|false
               Inverts the selection. If the Min and Max settings result in a match, no-match is
               returned and vice versa. Please note that the Invert setting only effects how Min
               and Max are applied to a specific value. Especially the DataSource and Satisfy
               settings (see below) are not inverted.

           DataSource DSName [DSName ...]
               Select one or more of the data sources. If no data source is configured, all data
               sources will be checked. If the type handled by the match does not have a data
               source of the specified name(s), this will always result in no match (independent
               of the Invert setting).

           Satisfy Any|All
               Specifies how checking with several data sources is performed. If set to Any, the
               match succeeds if one of the data sources is in the configured range. If set to
               All the match only succeeds if all data sources are within the configured range.
               Default is All.

               Usually All is used for positive matches, Any is used for negative matches. This
               means that with All you usually check that all values are in a "good" range, while
               with Any you check if any value is within a "bad" range (or outside the "good"
               range).

           Either Min or Max, but not both, may be unset.

           Example:

            # Match all values smaller than or equal to 100. Matches only if all data
            # sources are below 100.
            <Match "value">
              Max 100
              Satisfy "All"
            </Match>

            # Match if the value of any data source is outside the range of 0 - 100.
            <Match "value">
              Min   0
              Max 100
              Invert true
              Satisfy "Any"
            </Match>

       empty_counter
           Matches all values with one or more data sources of type COUNTER and where all counter
           values are zero. These counters usually never increased since they started existing
           (and are therefore uninteresting), or got reset recently or overflowed and you had
           really, really bad luck.

           Please keep in mind that ignoring such counters can result in confusing behavior:
           Counters which hardly ever increase will be zero for long periods of time. If the
           counter is reset for some reason (machine or service restarted, usually), the graph
           will be empty (NAN) for a long time. People may not understand why.

       hashed
           Calculates a hash value of the host name and matches values according to that hash
           value. This makes it possible to divide all hosts into groups and match only values
           that are in a specific group. The intended use is in load balancing, where you want to
           handle only part of all data and leave the rest for other servers.

           The hashing function used tries to distribute the hosts evenly. First, it calculates a
           32 bit hash value using the characters of the hostname:

             hash_value = 0;
             for (i = 0; host[i] != 0; i++)
               hash_value = (hash_value * 251) + host[i];

           The constant 251 is a prime number which is supposed to make this hash value more
           random. The code then checks the group for this host according to the Total and Match
           arguments:

             if ((hash_value % Total) == Match)
               matches;
             else
               does not match;

           Please note that when you set Total to two (i. e. you have only two groups), then the
           least significant bit of the hash value will be the XOR of all least significant bits
           in the host name. One consequence is that when you have two hosts,
           "server0.example.com" and "server1.example.com", where the host name differs in one
           digit only and the digits differ by one, those hosts will never end up in the same
           group.

           Available options:

           Match Match Total
               Divide the data into Total groups and match all hosts in group Match as described
               above. The groups are numbered from zero, i. e. Match must be smaller than Total.
               Total must be at least one, although only values greater than one really do make
               any sense.

               You can repeat this option to match multiple groups, for example:

                 Match 3 7
                 Match 5 7

               The above config will divide the data into seven groups and match groups three and
               five. One use would be to keep every value on two hosts so that if one fails the
               missing data can later be reconstructed from the second host.

           Example:

            # Operate on the pre-cache chain, so that ignored values are not even in the
            # global cache.
            <Chain "PreCache">
              <Rule>
                <Match "hashed">
                  # Divide all received hosts in seven groups and accept all hosts in
                  # group three.
                  Match 3 7
                </Match>
                # If matched: Return and continue.
                Target "return"
              </Rule>
              # If not matched: Return and stop.
              Target "stop"
            </Chain>

   Available targets
       notification
           Creates and dispatches a notification.

           Available options:

           Message String
               This required option sets the message of the notification. The following
               placeholders will be replaced by an appropriate value:

               %{host}
               %{plugin}
               %{plugin_instance}
               %{type}
               %{type_instance}
                   These placeholders are replaced by the identifier field of the same name.

               %{ds:name}
                   These placeholders are replaced by a (hopefully) human readable representation
                   of the current rate of this data source. If you changed the instance name
                   (using the set or replace targets, see below), it may not be possible to
                   convert counter values to rates.

               Please note that these placeholders are case sensitive!

           Severity "FAILURE"|"WARNING"|"OKAY"
               Sets the severity of the message. If omitted, the severity "WARNING" is used.

           Example:

             <Target "notification">
               Message "Oops, the %{type_instance} temperature is currently %{ds:value}!"
               Severity "WARNING"
             </Target>

       replace
           Replaces parts of the identifier using regular expressions.

           Available options:

           Host Regex Replacement
           Plugin Regex Replacement
           PluginInstance Regex Replacement
           TypeInstance Regex Replacement
               Match the appropriate field with the given regular expression Regex. If the
               regular expression matches, that part that matches is replaced with Replacement.
               If multiple places of the input buffer match a given regular expression, only the
               first occurrence will be replaced.

               You can specify each option multiple times to use multiple regular expressions one
               after another.

           Example:

            <Target "replace">
              # Replace "example.net" with "example.com"
              Host "\\<example.net\\>" "example.com"

              # Strip "www." from hostnames
              Host "\\<www\\." ""
            </Target>

       set Sets part of the identifier of a value to a given string.

           Available options:

           Host String
           Plugin String
           PluginInstance String
           TypeInstance String
               Set the appropriate field to the given string. The strings for plugin instance and
               type instance may be empty, the strings for host and plugin may not be empty. It's
               currently not possible to set the type of a value this way.

           Example:

            <Target "set">
              PluginInstance "coretemp"
              TypeInstance "core3"
            </Target>

   Backwards compatibility
       If you use collectd with an old configuration, i. e. one without a Chain block, it will
       behave as it used to. This is equivalent to the following configuration:

        <Chain "PostCache">
          Target "write"
        </Chain>

       If you specify a PostCacheChain, the write target will not be added anywhere and you will
       have to make sure that it is called where appropriate. We suggest to add the above snippet
       as default target to your "PostCache" chain.

   Examples
       Ignore all values, where the hostname does not contain a dot, i. e. can't be an FQDN.

        <Chain "PreCache">
          <Rule "no_fqdn">
            <Match "regex">
              Host "^[^\.]*$"
            </Match>
            Target "stop"
          </Rule>
          Target "write"
        </Chain>

SEE ALSO

       collectd(1), collectd-exec(5), collectd-perl(5), collectd-unixsock(5), types.db(5),
       hddtemp(8), iptables(8), kstat(3KSTAT), mbmon(1), psql(1), regex(7), rrdtool(1),
       sensors(1)

AUTHOR

       Florian Forster <octo@collectd.org>