NAME

       oss_audigyls - Creative Labs CA106 (AudigyLS/SBLive 24bit) driver.

DESCRIPTION

       Open Sound System driver for Creative Labs Audigy2-LS and SBLive 24bit 7.1 soundcards.

       Audigy-LS device characteristics:

              •  8/16/24 bit playback/record

              •  mono/stereo/4/5.1 playback

              •  8KHz to 192Khz sample rate.

   AUDIGYLS MODELS
       There  are 2 models of the AudigyLS device: one with an AC97 codec called the AudigyLS and
       the one without called the SBLive 7.1. Essentially they are the same chip but behave a bit
       differently.

       When  playing  AC3 on the AudigyLS (the one with the AC97 mixer) - you need to ensure that
       the igain slider is set to 0.

   AUDIGYLS MIXER
       •  The AudigyLS has 4 mixer controls for each channel.

       •  The "spread" button will simply duplicate the front audio on the other  3  channels  so
          that every speaker is playing what the front L/R is playing.

       •  LoopBack recording allows you to capture any channel that's playing audio.

       •  Record Volume slider just adjusts the input gain.

       •  Record Source selector selects the input.

       •  The "recmon" button enables a passthrough of the analog input signal.

       •  Monitor Volume slider sets the passthrough gain if recmon is enabled.

OPTIONS

       •  audigyls_spdif_enable=0|1  The  Audigy  LS has a versa-jack (orange) that can be set as
          SPDIF output or the Side-Surround left/right speakers in a  7.1  setup.   When  set  as
          SPDIF, you can get play PCM/AC3 audio to a Dolby(R) capable receiver.

FILES

       /etc/oss4/conf/oss_audigyls.conf Device configuration file

AUTHOR

       4Front Technologies

                                           09 July 2018                           oss_audigyls(7)