NAME

       PERFQUERY -

QUERY INFINIBAND PORT COUNTERS ON A SINGLE PORT

   SYNOPSIS
       perfquery [options] [<lid|guid> [[port(s)] [reset_mask]]]

   DESCRIPTION
       perfquery  uses  PerfMgt  GMPs  to  obtain  the  PortCounters (basic performance and error
       counters),  PortExtendedCounters,  PortXmitDataSL,   PortRcvDataSL,   PortRcvErrorDetails,
       PortXmitDiscardDetails,  PortExtendedSpeedsCounters, or PortSamplesControl from the PMA at
       the node/port specified. Optionally shows aggregated  counters  for  all  ports  of  node.
       Finally it can, reset after read, or just reset the counters.

       Note: In PortCounters, PortCountersExtended, PortXmitDataSL, and PortRcvDataSL, components
       that represent Data (e.g. PortXmitData and  PortRcvData)  indicate  octets  divided  by  4
       rather than just octets.

       Note: Inputting a port of 255 indicates an operation be performed on all ports.

       Note:  For  PortCounters, ExtendedCounters, and resets, multiple ports can be specified by
       either a comma separated list or a port range.  See examples below.

   OPTIONS
       -x, --extended
              show extended port counters rather than (basic) port counters.  Note that  extended
              port counters attribute is optional.

       -X, --xmtsl
              show transmit data SL counter. This is an optional counter for QoS.

       -S, --rcvsl
              show receive data SL counter. This is an optional counter for QoS.

       -D, --xmtdisc
              show transmit discard details. This is an optional counter.

       -E, --rcverr
              show receive error details. This is an optional counter.

       -D, --xmtdisc
              show transmit discard details. This is an optional counter.

       -T, --extended_speeds
              show extended speeds port counters. This is an optional counter.

       --oprcvcounters
              show Rcv Counters per Op code. This is an optional counter.

       --flowctlcounters
              show flow control counters. This is an optional counter.

       --vloppackets
              show packets received per Op code per VL. This is an optional counter.

       --vlopdata
              show data received per Op code per VL. This is an optional counter.

       --vlxmitflowctlerrors
              show flow control update errors per VL. This is an optional counter.

       --vlxmitcounters
              show ticks waiting to transmit counters per VL. This is an optional counter.

       --swportvlcong
              show sw port VL congestion. This is an optional counter.

       --rcvcc
              show Rcv congestion control counters. This is an optional counter.

       --slrcvfecn
              show SL Rcv FECN counters. This is an optional counter.

       --slrcvbecn
              show SL Rcv BECN counters. This is an optional counter.

       --xmitcc
              show Xmit congestion control counters. This is an optional counter.

       --vlxmittimecc
              show VL Xmit Time congestion control counters. This is an optional counter.

       -c, --smplctl
              show port samples control.

       -a, --all_ports
              show  aggregated  counters for all ports of the destination lid, reset all counters
              for all ports, or if multiple ports are specified, aggregate the  counters  of  the
              specified  ports.   If the destination lid does not support the AllPortSelect flag,
              all ports will be iterated through to emulate AllPortSelect behavior.

       -l, --loop_ports
              If all ports are selected by the user (either through the -a option or port 255) or
              multiple  ports  are  specified  iterate  through  each port rather than doing than
              aggregate operation.

       -r, --reset_after_read
              reset counters after read

       -R, --Reset_only
              only reset counters

   Addressing Flags
       -G, --Guid     The address specified is a Port GUID

       -L, --Lid   The address specified is a LID

       -s, --sm_port <smlid>     use 'smlid' as the target lid for SA queries.

   Port Selection flags
       -C, --Ca <ca_name>    use the specified ca_name.

       -P, --Port <ca_port>    use the specified ca_port.

   Local port Selection
       Multiple port/Multiple CA support: when no IB device or port is specified (see the  "local
       umad  parameters"  below),  the libibumad library selects the port to use by the following
       criteria:

          1. the first port that is ACTIVE.

          2. if not found, the first port that is UP (physical link up).

          If a port and/or CA name is specified, the libibumad library attempts  to  fulfill  the
          user request, and will fail if it is not possible.

          For example:

              ibaddr                 # use the first port (criteria #1 above)
              ibaddr -C mthca1       # pick the best port from "mthca1" only.
              ibaddr -P 2            # use the second (active/up) port from the first available IB device.
              ibaddr -C mthca0 -P 2  # use the specified port only.

   Debugging flags
       -d     raise the IB debugging level.  May be used several times (-ddd or -d -d -d).

       -e     show send and receive errors (timeouts and others)

       -h, --help      show the usage message

       -v, --verbose
              increase  the application verbosity level.  May be used several times (-vv or -v -v
              -v)

       -V, --version     show the version info.

   Configuration flags
       -t, --timeout <timeout_ms> override the default timeout for the solicited mads.

       -y, --m_key <key>
              use the specified M_key for requests. If non-numeric value (like 'x') is  specified
              then a value will be prompted for.

       --config, -z  <config_file> Specify alternate config file.
          Default: /etc/infiniband-diags/ibdiag.conf

   FILES
   CONFIG FILE
       /etc/infiniband-diags/ibdiag.conf

       A  global  config  file  is provided to set some of the common options for all tools.  See
       supplied config file for details.

   EXAMPLES
          perfquery                # read local port performance counters
          perfquery 32 1           # read performance counters from lid 32, port 1
          perfquery -x 32 1        # read extended performance counters from lid 32, port 1
          perfquery -a 32          # read perf counters from lid 32, all ports
          perfquery -r 32 1        # read performance counters and reset
          perfquery -x -r 32 1     # read extended performance counters and reset
          perfquery -R 0x20 1      # reset performance counters of port 1 only
          perfquery -x -R 0x20 1   # reset extended performance counters of port 1 only
          perfquery -R -a 32       # reset performance counters of all ports
          perfquery -R 32 2 0x0fff # reset only error counters of port 2
          perfquery -R 32 2 0xf000 # reset only non-error counters of port 2
          perfquery -a 32 1-10     # read performance counters from lid 32, port 1-10, aggregate output
          perfquery -l 32 1-10     # read performance counters from lid 32, port 1-10, output each port
          perfquery -a 32 1,4,8    # read performance counters from lid 32, port 1, 4, and 8, aggregate output
          perfquery -l 32 1,4,8    # read performance counters from lid 32, port 1, 4, and 8, output each port

   AUTHOR
       Hal Rosenstock
              < hal.rosenstock@gmail.com >

                                                                                     PERFQUERY(8)