Provided by: freebsd-manpages_10.1~RC1-1_all 
NAME
timeout, untimeout, callout_handle_init, callout_init, callout_init_mtx, callout_init_rm,
callout_init_rw, callout_stop, callout_drain, callout_reset, callout_reset_on,
callout_reset_curcpu, callout_reset_sbt, callout_reset_sbt_on, callout_reset_sbt_curcpu,
callout_schedule, callout_schedule_on, callout_schedule_curcpu, callout_pending,
callout_active, callout_deactivate — execute a function after a specified length of time
SYNOPSIS
#include <sys/types.h>
#include <sys/systm.h>
typedef void timeout_t (void *);
struct callout_handle
timeout(timeout_t *func, void *arg, int ticks);
void
callout_handle_init(struct callout_handle *handle);
struct callout_handle handle = CALLOUT_HANDLE_INITIALIZER(&handle);
void
untimeout(timeout_t *func, void *arg, struct callout_handle handle);
void
callout_init(struct callout *c, int mpsafe);
void
callout_init_mtx(struct callout *c, struct mtx *mtx, int flags);
void
callout_init_rm(struct callout *c, struct rmlock *rm, int flags);
void
callout_init_rw(struct callout *c, struct rwlock *rw, int flags);
int
callout_stop(struct callout *c);
int
callout_drain(struct callout *c);
int
callout_reset(struct callout *c, int ticks, timeout_t *func, void *arg);
int
callout_reset_on(struct callout *c, int ticks, timeout_t *func, void *arg, int cpu);
int
callout_reset_sbt_on(struct callout *c, sbintime_t sbt, sbintime_t pr, timeout_t *func,
void *arg, int cpu, int flags);
int
callout_reset_curcpu(struct callout *c, int ticks, timeout_t *func, void *arg);
int
callout_schedule(struct callout *c, int ticks);
int
callout_schedule_on(struct callout *c, int ticks, int cpu);
int
callout_schedule_curcpu(struct callout *c, int ticks);
int
callout_pending(struct callout *c);
int
callout_active(struct callout *c);
void
callout_deactivate(struct callout *c);
DESCRIPTION
The function timeout() schedules a call to the function given by the argument func to take
place after ticks/hz seconds. Non-positive values of ticks are silently converted to the
value ‘1’. func should be a pointer to a function that takes a void * argument. Upon
invocation, func will receive arg as its only argument. The return value from timeout() is
a struct callout_handle which can be used in conjunction with the untimeout() function to
request that a scheduled timeout be canceled. The timeout() call is the old style and new
code should use the callout_*() functions.
The function callout_handle_init() can be used to initialize a handle to a state which will
cause any calls to untimeout() with that handle to return with no side effects.
Assigning a callout handle the value of CALLOUT_HANDLE_INITIALIZER() performs the same
function as callout_handle_init() and is provided for use on statically declared or global
callout handles.
The function untimeout() cancels the timeout associated with handle using the func and arg
arguments to validate the handle. If the handle does not correspond to a timeout with the
function func taking the argument arg no action is taken. handle must be initialized by a
previous call to timeout(), callout_handle_init(), or assigned the value of
CALLOUT_HANDLE_INITIALIZER(&handle) before being passed to untimeout(). The behavior of
calling untimeout() with an uninitialized handle is undefined. The untimeout() call is the
old style and new code should use the callout_*() functions.
As handles are recycled by the system, it is possible (although unlikely) that a handle from
one invocation of timeout() may match the handle of another invocation of timeout() if both
calls used the same function pointer and argument, and the first timeout is expired or
canceled before the second call. The timeout facility offers O(1) running time for
timeout() and untimeout(). Timeouts are executed from softclock() with the Giant lock held.
Thus they are protected from re-entrancy.
The functions callout_init(), callout_init_mtx(), callout_init_rm(), callout_init_rw(),
callout_stop(), callout_drain(), callout_reset() and callout_schedule() are low-level
routines for clients who wish to allocate their own callout structures.
The function callout_init() initializes a callout so it can be passed to callout_stop(),
callout_drain(), callout_reset() or callout_schedule() without any side effects. If the
mpsafe argument is zero, the callout structure is not considered to be “multi-processor
safe”; that is, the Giant lock will be acquired before calling the callout function, and
released when the callout function returns.
The callout_init_mtx() function may be used as an alternative to callout_init(). The
parameter mtx specifies a mutex that is to be acquired by the callout subsystem before
calling the callout function, and released when the callout function returns. The following
flags may be specified:
CALLOUT_RETURNUNLOCKED The callout function will release mtx itself, so the callout
subsystem should not attempt to unlock it after the callout function
returns.
The callout_init_rw() and the callout_init_rm() fuctions serve the need of using rwlocks and
rmlocks in conjunction with callouts. The functions do the same as callout_init() with the
possibility of specifying an extra rw or rm argument. If an rm argument is specified, the
lock should be created without passing the RM_SLEEPABLE flag. The usable lock classes are
currently limited to mutexes, rwlocks and non-sleepable rmlocks, because callout handlers
run in softclock swi, so they cannot sleep nor acquire sleepable locks like sx or lockmgr.
The following flags may be specified:
CALLOUT_SHAREDLOCK The lock is only acquired in read mode when running the callout handler.
It has no effects when used in conjunction with mtx.
The function callout_stop() cancels a callout if it is currently pending. If the callout is
pending, then callout_stop() will return a non-zero value. If the callout is not set, has
already been serviced or is currently being serviced, then zero will be returned. If the
callout has an associated mutex, then that mutex must be held when this function is called.
The function callout_drain() is identical to callout_stop() except that it will wait for the
callout to be completed if it is already in progress. This function MUST NOT be called
while holding any locks on which the callout might block, or deadlock will result. Note
that if the callout subsystem has already begun processing this callout, then the callout
function may be invoked during the execution of callout_drain(). However, the callout
subsystem does guarantee that the callout will be fully stopped before callout_drain()
returns.
The function callout_reset() first performs the equivalent of callout_stop() to disestablish
the callout, and then establishes a new callout in the same manner as timeout(). If there
was already a pending callout and it was rescheduled, then callout_reset() will return a
non-zero value. If the callout has an associated mutex, then that mutex must be held when
this function is called. The function callout_schedule() (re)schedules an existing callout
for a new period of time; it is equivalent to calling callout_reset() with the func and arg
parameters extracted from the callout structure (though possibly with lower overhead).
The functions callout_reset_on() and callout_schedule_on() are equivalent to callout_reset()
and callout_schedule() but take an extra parameter specifying the target CPU for the
callout.
The function callout_reset_sbt_on() allows to get higher time resolution, taking relative or
absolute time and precision instead of relative ticks count. If specified time is in past,
it will be silently converted to present to run handler as soon as possible.
The following flags may be specified:
C_ABSOLUTE Handle the sbt argument as absolute time of the event since boot, or relative
time otherwise.
C_DIRECT_EXEC Run handler directly from hardware interrupt context instead of softclock
swi. It is faster, but puts more constraints on handlers. Handlers may use
only spin mutexes for locking, and they must be fast because they run with
absolute priority.
C_PREL() Specifies relative event time precision as binary logarithm of time interval
divided by acceptable time deviation: 1 -- 1/2, 2 -- 1/4, etc. Smaller value
allows to aggregate more events in one timer interrupt to reduce processing
overhead and power consumption.
The functions callout_reset_curcpu() and callout_schedule_curcpu() are wrappers for
callout_reset_on() and callout_schedule_on() using the current CPU as the target CPU.
The macros callout_pending(), callout_active() and callout_deactivate() provide access to
the current state of the callout. Careful use of these macros can avoid many of the race
conditions that are inherent in asynchronous timer facilities; see Avoiding Race Conditions
below for further details. The callout_pending() macro checks whether a callout is pending;
a callout is considered pending when a timeout has been set but the time has not yet
arrived. Note that once the timeout time arrives and the callout subsystem starts to
process this callout, callout_pending() will return FALSE even though the callout function
may not have finished (or even begun) executing. The callout_active() macro checks whether
a callout is marked as active, and the callout_deactivate() macro clears the callout's
active flag. The callout subsystem marks a callout as active when a timeout is set and it
clears the active flag in callout_stop() and callout_drain(), but it does not clear it when
a callout expires normally via the execution of the callout function.
Avoiding Race Conditions
The callout subsystem invokes callout functions from its own timer context. Without some
kind of synchronization it is possible that a callout function will be invoked concurrently
with an attempt to stop or reset the callout by another thread. In particular, since
callout functions typically acquire a mutex as their first action, the callout function may
have already been invoked, but be blocked waiting for that mutex at the time that another
thread tries to reset or stop the callout.
The callout subsystem provides a number of mechanisms to address these synchronization
concerns:
1. If the callout has an associated mutex that was specified using the
callout_init_mtx() function (or implicitly specified as the Giant mutex using
callout_init() with mpsafe set to FALSE), then this mutex is used to avoid the
race conditions. The associated mutex must be acquired by the caller before
calling callout_stop() or callout_reset() and it is guaranteed that the callout
will be correctly stopped or reset as expected. Note that it is still necessary
to use callout_drain() before destroying the callout or its associated mutex.
2. The return value from callout_stop() and callout_reset() indicates whether or not
the callout was removed. If it is known that the callout was set and the callout
function has not yet executed, then a return value of FALSE indicates that the
callout function is about to be called. For example:
if (sc->sc_flags & SCFLG_CALLOUT_RUNNING) {
if (callout_stop(&sc->sc_callout)) {
sc->sc_flags &= ~SCFLG_CALLOUT_RUNNING;
/* successfully stopped */
} else {
/*
* callout has expired and callout
* function is about to be executed
*/
}
}
3. The callout_pending(), callout_active() and callout_deactivate() macros can be
used together to work around the race conditions. When a callout's timeout is
set, the callout subsystem marks the callout as both active and pending. When
the timeout time arrives, the callout subsystem begins processing the callout by
first clearing the pending flag. It then invokes the callout function without
changing the active flag, and does not clear the active flag even after the
callout function returns. The mechanism described here requires the callout
function itself to clear the active flag using the callout_deactivate() macro.
The callout_stop() and callout_drain() functions always clear both the active and
pending flags before returning.
The callout function should first check the pending flag and return without
action if callout_pending() returns TRUE. This indicates that the callout was
rescheduled using callout_reset() just before the callout function was invoked.
If callout_active() returns FALSE then the callout function should also return
without action. This indicates that the callout has been stopped. Finally, the
callout function should call callout_deactivate() to clear the active flag. For
example:
mtx_lock(&sc->sc_mtx);
if (callout_pending(&sc->sc_callout)) {
/* callout was reset */
mtx_unlock(&sc->sc_mtx);
return;
}
if (!callout_active(&sc->sc_callout)) {
/* callout was stopped */
mtx_unlock(&sc->sc_mtx);
return;
}
callout_deactivate(&sc->sc_callout);
/* rest of callout function */
Together with appropriate synchronization, such as the mutex used above, this
approach permits the callout_stop() and callout_reset() functions to be used at
any time without races. For example:
mtx_lock(&sc->sc_mtx);
callout_stop(&sc->sc_callout);
/* The callout is effectively stopped now. */
If the callout is still pending then these functions operate normally, but if
processing of the callout has already begun then the tests in the callout
function cause it to return without further action. Synchronization between the
callout function and other code ensures that stopping or resetting the callout
will never be attempted while the callout function is past the
callout_deactivate() call.
The above technique additionally ensures that the active flag always reflects
whether the callout is effectively enabled or disabled. If callout_active()
returns false, then the callout is effectively disabled, since even if the
callout subsystem is actually just about to invoke the callout function, the
callout function will return without action.
There is one final race condition that must be considered when a callout is being stopped
for the last time. In this case it may not be safe to let the callout function itself
detect that the callout was stopped, since it may need to access data objects that have
already been destroyed or recycled. To ensure that the callout is completely finished, a
call to callout_drain() should be used.
RETURN VALUES
The timeout() function returns a struct callout_handle that can be passed to untimeout().
The callout_stop() and callout_drain() functions return non-zero if the callout was still
pending when it was called or zero otherwise.
HISTORY
The current timeout and untimeout routines are based on the work of Adam M. Costello and
George Varghese, published in a technical report entitled Redesigning the BSD Callout and
Timer Facilities and modified slightly for inclusion in FreeBSD by Justin T. Gibbs. The
original work on the data structures used in this implementation was published by G.
Varghese and A. Lauck in the paper Hashed and Hierarchical Timing Wheels: Data Structures
for the Efficient Implementation of a Timer Facility in the Proceedings of the 11th ACM
Annual Symposium on Operating Systems Principles. The current implementation replaces the
long standing BSD linked list callout mechanism which offered O(n) insertion and removal
running time but did not generate or require handles for untimeout operations.