Provided by: alliance_5.1.1-1.1_amd64 bug

NAME

       genpat, A procedural pattern file generator

SYNOPSIS

       genpat [-v] [-k] [file]

DESCRIPTION

       Genpat  is a set of C fonctions that allows a procedural description of input pattern file
       for the logic simulator ASIMUT. The Unix genpat command accepts a  C  file  as  input  and
       produces  a pattern description file as output. The extension ".c" is not to be given. The
       file generated by genpat is in pat format, so IT IS STRONGLY  RECOMMENDED  TO  SEE  pat(5)
       BEFORE THIS MANUAL.

OPTIONS

       -v             verbose mode

       -k             keeps the executable along with the compilation Makefile after completion

GENPAT FILE FORMAT

       From  a  user point of view, genpat is a pattern description language using all standard C
       facilities (include, define, variables, loop, ...).  Fonctions provided by genpat  are  to
       be used in a given order. Using them in a different order won't crash the system, but will
       result in execution errors. Here follows the description of the input file.

       A pat format file can be divided in two parts : declaration and description part.

       The declaration part is the list of  inputs,  outputs,  internal  signals  and  registers.
       Inputs  are  to  be forced to a certain value and all the others are to be observed during
       simulation.

       The description part is a set of patterns, where each pattern defines the value of  inputs
       and outputs. The pattern number represents actually the absolute time for the simulator.

       Similarly,  a  genpat file can be divided in two parts : declaration and description part.
       Functions related to the declaration must be called before any  function  related  to  the
       description part.

       declaration part
                 The  first  thing  you  should do in this part is to give the output file's name
                 (see DEF_GENPAT(3)). Then, this part allows  you  to  declare  the  inputs,  the
                 outputs,  and  internal observing points (see DECLAR(3)). It is also possible to
                 create virtual arraies (see ARRAY(3)).

       description part
                 After all signals are declared, you can begin to define input values  which  are
                 to  be  applied  to  the  inputs of the circuit or output values which are to be
                 compare with the values produced during the simulation. (see AFFECT(3)).  Genpat
                 describes  the  stimulus by event : only signal transitions are described.  This
                 part also allows you to give instructions to the simulation  tool  to  save  the
                 state of the circuit at the end of the simulation. (see SAVE(3)). Last thing you
                 should do in this part is to generate the output file (see SAV_GENPAT(3)).

FUNCTIONS

       DEF_GENPAT()   defines the output file's name.

       SAV_GENPAT()   make the output file be generated

       DECLAR()       declares inputs, outputs, and the internal observing points.

       ARRAY()        allows signals of the same type to be groupped in  an  "virtual  array"  in
                      order to ease their manipulation

       INIT()         changes the values of registers between two patterns.

       AFFECT()       assigns  a value to a signal, at a given pattern number. This value is kept
                      on the signal until a new value is assigned to the signal.

       SAVE()         informs the simulation tool to save the state of the circuit at the end  of
                      simulation

       LABEL()        gives a label to the current pattern

       GETCPAT()      return the number of the current pattern

EXAMPLES

       #include <stdio.h>
       #include "genpat.h"

       char *inttostr(entier)
       int entier;
         {
         char *str;
         str = (char *) mbkalloc (32 * sizeof (char));
         sprintf (str, "%d",entier);
         return(str);
         }
          /*------------------------------*/
          /* end of the description       */
          /*------------------------------*/

        main ()
        {
        int i;
        int j;
        int cur_vect = 0;

        DEF_GENPAT("example");

        /* interface */
        DECLAR ("a", ":2", "X", IN, "3  downto 0", "" );
        DECLAR ("b", ":2", "X", IN, "3  downto 0", "" );
        DECLAR ("s", ":2", "X", OUT, "3 downto 0", "" );
        DECLAR ("vdd", ":2", "B", IN, "", "" );
        DECLAR ("vss", ":2", "B", IN, "", "" );

        LABEL ("adder");
        AFFECT ("0", "vdd", "0b1");
        AFFECT ("0", "vss", "0b0");

        for (i=0; i<16; i++)
        {
            for (j=0; j<16; j++)
            {
                AFFECT (inttostr(cur_vect), "a", inttostr(i) );
                AFFECT (inttostr(cur_vect), "b", inttostr(j) );
                cur_vect++;
            }
        }

        SAV_GENPAT ();
        }

ENVIRONMENT VARIABLES

       Genpat reads the environment variable VH_PATSFX to give the result file an extension.

SEE ALSO

       AFFECT(3),  ARRAY(3),  DECLAR(3),  DEF_GENPAT(3),  GETCPAT(3), INIT(3), LABEL(3), SAVE(3),
       SAV_GENPAT(3), pat(5), asimut(1)