Provided by: cue2toc_0.4-5_amd64 bug

NAME

       cue2toc - convert CUE to TOC format

SYNOPSIS

       cue2toc [-dhqv] [-o tocfile] [cuefile]

DESCRIPTION

       Cue2toc  converts  cuefile  from  CUE  to TOC format and writes the result to tocfile.  If
       either cuefile or tocfile is omitted or a single dash  "-"  cue2toc  reads  from  standard
       input and writes to standard ouput respectively.

       CUE  files  are  text  files  describing  the  layout  of a CD-Rom and typically carry the
       extension ".cue".

       Cdrdao is a CD-burning application which has its own native TOC  format  to  describe  the
       disc  layout.  Although  cdrdao  has direct support for reading CUE files, it is currently
       limited to data tracks only. So cue2toc's main usefulness lies  in  converting  CUE  files
       containing audio tracks.

       CUE  files for audio discs often come with data files in compressed audio formats like MP3
       or Ogg Vorbis. To burn such a disc with cdrdao these files must be converted  to  WAVE  or
       raw  format.   Cue2toc  can  do  this  automatically  if  configured properly (see section
       CONFIGURATION below for more information).

       Cue2toc normally displays warning messages for unsupported commands and constructs as well
       as for each data file converted. The -q option disables these messages.

OPTIONS

       -d     print debugging information

       -h     print a short help message

       -o tocfile
              write result to tocfile instead of standard ouput

       -q     quiet mode; do not print warnings

       -v     display version information

CUE FORMAT

       What  follows  is  a  description  of the CUE format expected by cue2toc.  For information
       about the TOC format please consult the cdrdao(1) manual page.

       CUE files consist of commands and their arguments which must be separated from each  other
       by any number of whitespace characters.  Space, horizontal tabulator, newline and carriage
       return are recognized as whitespace characters except inside strings surrounded by  double
       quotes,  where  they are part of the string. Commands are not case sensitive. CD-Text data
       can be at most 80 characters per item.

       Timecode values are accepted in the forms "X:X:X", "X:X"  and  "X"  where  each  "X"  must
       consist  of at most two digits and may be zero padded to the left. They are interpreted as
       "M:S:F", "S:F" and "F" respectively where "M" means "minutes" and must be in the  range  0
       <=  M  <=  99,  "S"  means  "seconds" and must be in the range 0 <= S <= 59, and "F" means
       "frames" and must be in the range 0 <= F <= 74.

       CUE files are logically divided into a global section and one to 99 track sections. Inside
       these sections the following commands are allowed:

   Global Section
       REM anything_to_newline
       CATALOG string
       CDTEXTFILE string
       TITLE string
       PERFORMER string
       SONGWRITER string
       FILE string BINARY|MOTOROLA|AIFF|WAVE|MP3

       REM    Optional.   Introduces  a  comment.  Anything from there on up to and including the
              next newline character is ignored. Comments can appear anywhere in the file but not
              between a command and its arguments.

       CATALOG
              Optional.  The Media Catalog Number of the disc. Must be exactly 13 characters.

       CDTEXTFILE
              Optional.  Specifies an external file containing CD-Text data. Ignored.

       TITLE  Optional.  The CD-Text title of the disc.

       PERFORMER
              Optional.  The CD-Text performer of the disc.

       SONGWRITER
              Optional.  The CD-Text songwriter of the disc.

       FILE   Required.   The name and type of the file to be used for all following tracks.  The
              string contains the name of the file followed by one  of  BINARY,  MOTOROLA,  AIFF,
              WAVE  or  MP3.   As far as cue2toc is concerned the type of the file is effectively
              ignored.  Nonetheless MOTOROLA, AIFF and MP3 cause printing of  a  warning  message
              since these file types can not be used directly with cdrdao.

       The  first appearance of a TRACK command causes leaving of the global section and entering
       the track section.

   Track Section
       TRACK number mode
       REM anything_to_newline
       FLAGS [DCP] [4CH] [PRE] [SCMS]
       ISRC string
       TITLE string
       PERFORMER string
       SONGWRITER string
       PREGAP timecode
       INDEX number timecode
       POSTGAP timecode
       FILE string BINARY|MOTOROLA|AIFF|WAVE|MP3

       TRACK  Required.  Starts a new track definition. The number is ignored. The mode  must  be
              one of AUDIO, MODE1/2048, MODE1/2352, MODE2/2336 or MODE2/2352.

       FLAGS  Optional.  Defines the flags for this track. Must be followed by one or more of the
              following commands: DCP (digital copy permitted), 4CH  (four  channel  audio),  PRE
              (pre-emphasis  enabled)  and SCMS (serial copy management system).  SCMS is ignored
              because there is no corresponding option in the TOC format.

       ISRC   Optional.  The International Standard  Recording  Code  for  this  track.  Must  be
              exactly 12 characters long.

       TITLE  Optional.  The CD-Text title of this track.

       PERFORMER
              Optional.  The CD-Text performer of this track.

       SONWRITER
              Optional.  The CD-Text songwriter of this track.

       PREGAP Optional.   The  length  of the track pregap to be filled with zero data.  Mutually
              exclusive with INDEX 0.

       POSTGAP
              Optional.  The length of the track postgap to be filled with zero data.

       INDEX  Optional.  The number must be in the range 0  <=  number  <=  99.  Index  number  1
              specifies  the  start of the track. Index number 0 is the start of the track pregap
              filled with data from the file, i.e. the difference between index 0 and index 1  is
              the length of the pregap. Index 0 is mutually exclusive with PREGAP.  Index numbers
              greater than 1 specify subindexes for this track and must be sequential.

       FILE   Optional in track section. The syntax is the same as  described  above  and  if  it
              appears inside a track specification it takes effect on the next TRACK command.

CONFIGURATION

       Cue2toc  can  be  configured by specifying options in the file ~/.cue2tocrc. The syntax of
       this file and allowed configuration options follow.

       Comments are introduced by the hash character '#' and extend  to  the  end  of  the  line.
       Configuration options take the form

       OPTION = value

       The  value must be quoted if it contains whitespace characters.  To include a double quote
       character in a quoted string, precede it with a backslash. Option values can either be  of
       boolean  type or string type. For boolean types any one of "yes", "y", "true" or "1" means
       true and anything else means  false.  The  "default value"  in  the  descriptions  of  the
       individual options below is the value assumed by cue2toc in the absence of the option from
       the configuration file.

       CONVERTER = ext_from ext_to command
              This option takes three string arguments and specifies a converter for  files  with
              the  extension  ext_from. They are converted by the given command and the extension
              is replaced with ext_to in the TOC file. When the command is  run  the  environment
              will  contain  the two variables C2T_FROM and C2T_TO which contain the original and
              new file name respectively. For example

              CONVERTER = .mp3 .wav
                   "lame --decode \"$C2T_FROM\" \"$C2T_TO\""

              will convert all MP3 files to WAVE format using lame. It is a good  idea  to  quote
              the  varibles  $C2T_FROM and $C2T_TO because they could contain whitespace or other
              funny characters with a special meaning to the shell.

              This option can be specified multiple times and each file is  checked  against  the
              list of converters to see if it matches any of them. If multiple converters match a
              given file only the first match is used.

              If a file with the name that results from replacing ext_from  with  ext_to  already
              exists, the conversion command will not be executed.

              This option has no default value.

       CONVERT = boolean
              This option enables or disables the conversion of data files as described above for
              the CONVERTER option.  If this option is false, no conversion will take place.  The
              default value is "yes".

       QUIET = boolean
              If this option is true it has the same effect as if cue2toc was invoked with the -q
              command line option. The default value is "no".

       CDTEXT = boolean
              This option enables or disables the writing of CD-Text data to the TOC file  if  it
              is present in the CUE file.  The default value is "yes".

LIMITATIONS

       The  command  CDTEXTFILE  and  the  flag SCMS have no equivalent in the TOC format and are
       ignored.

       CUE files containing data tracks which specify a starting time greater than zero cannot be
       converted  by  cue2toc because the TOC format does not provide a way to specify a starting
       time at all for data tracks. However if the CUE file does not contain any audio tracks you
       can try to use the CUE file directly with cdrdao.

FILES

       ~/.cue2tocrc
              The  configuration  file.  The  format  of  this  file  is described in the section
              CONFIGURATION above.

SEE ALSO

       cdrdao(1), lame(1)

BUGS

       Since cue2toc's definition of the CUE format is entirely based on a  number  of  different
       CUE  files  the  author came across there is a very high probability that it will not work
       correctly with all the other CUE files you might encounter. If this is the  case  for  you
       please  send  the  problematic  CUE  file  along  with  the  version  number of cue2toc to
       <dermatsch@gmx.de>.

AUTHOR

       Matthias Czapla <dermatsch@gmx.de>

                                                                                       CUE2TOC(1)