Provided by: lbzip2_2.5-1_amd64 bug

NAME

       lbzip2 - parallel bzip2 utility

SYNOPSIS

       lbzip2|bzip2 [-n WTHRS] [-k|-c|-t] [-d] [-1 .. -9] [-f] [-s] [-u] [-v] [-S] [ FILE ... ]

       lbunzip2|bunzip2 [-n WTHRS] [-k|-c|-t] [-z] [-f] [-s] [-u] [-v] [-S] [ FILE ... ]

       lbzcat|bzcat [-n WTHRS] [-z] [-f] [-s] [-u] [-v] [-S] [ FILE ... ]

       lbzip2|bzip2|lbunzip2|bunzip2|lbzcat|bzcat -h

DESCRIPTION

       Compress or decompress FILE operands or standard input to regular files or standard output
       using the Burrows-Wheeler block-sorting text compression  algorithm.  The  lbzip2  utility
       employs  multiple  threads  and an input-bound splitter even when decompressing .bz2 files
       created by standard bzip2.

       Compression is generally considerably better  than  that  achieved  by  more  conventional
       LZ77/LZ78-based  compressors,  and  competitive with all but the best of the PPM family of
       statistical compressors.

       Compression is always performed, even if the compressed file is slightly larger  than  the
       original.  The  worst case expansion is for files of zero length, which expand to fourteen
       bytes. Random data  (including  the  output  of  most  file  compressors)  is  coded  with
       asymptotic expansion of around 0.5%.

       The  command-line  options  are  deliberately very similar to those of bzip2 and gzip, but
       they are not identical.

INVOCATION

       The default mode of operation is compression. If the utility is  invoked  as  lbunzip2  or
       bunzip2,  the  mode  is  switched to decompression. Calling the utility as lbzcat or bzcat
       selects decompression, with the decompressed byte-stream written to standard output.

OPTIONS

       -n WTHRS
              Set the number  of  (de)compressor  threads  to  WTHRS.   If  this  option  is  not
              specified, lbzip2 tries to query the system for the number of online processors (if
              both the compilation environment and the execution environment  support  that),  or
              exits with an error (if it's unable to determine the number of processors online).

       -k, --keep
              Don't  remove  FILE  operands  after successful (de)compression. Open regular input
              files with more than one link.

       -c, --stdout
              Write output to standard output, even when FILE operands are  present.  Implies  -k
              and excludes -t.

       -t, --test
              Test  decompression;  discard  output  instead  of  writing it to files or standard
              output. Implies  -k  and  excludes  -c.   Roughly  equivalent  to  passing  -c  and
              redirecting standard output to the bit bucket.

       -d, --decompress
              Force decompression over the mode of operation selected by the invocation name.

       -z, --compress
              Force compression over the mode of operation selected by the invocation name.

       -1 .. -9
              Set the compression block size to 100K .. 900K, in 100K increments.  Ignored during
              decompression. See also the BLOCK SIZE section below.

       --fast Alias for -1.

       --best Alias for -9.  This is the default.

       -f, --force
              Open non-regular input files. Open input files with more than  one  link,  breaking
              links  when  -k  isn't specified in addition. Try to remove each output file before
              opening it.  By default lbzip2 will not overwrite existing files; if you want  this
              to  happen,  you should specify -f.  If -c and -d are also given don't reject files
              not in bzip2 format, just copy them without change; without -f  lbzip2  would  stop
              after reaching a file that is not in bzip2 format.

       -s, --small
              Reduce memory usage at cost of performance.

       -u, --sequential
              Perform splitting input blocks sequentially. This may improve compression ratio and
              decrease CPU usage, but will degrade scalability.

       -v, --verbose
              Be more verbose. Print more detailed information about (de)compression progress  to
              standard  error:  before processing each file, print a message stating the names of
              input and output  files;  during  (de)compression,  print  a  rough  percentage  of
              completeness  and estimated time of arrival (only if standard error is connected to
              a terminal); after processing each file print a message showing compression  ratio,
              space savings, total compression time (wall time) and average (de)compression speed
              (bytes of plain data processed per second).

       -S     Print  condition  variable  statistics  to  standard  error  for   each   completed
              (de)compression operation. Useful in profiling.

       -q, --quiet, --repetitive-fast, --repetitive-best, --exponential
              Accepted for compatibility with bzip2, otherwise ignored.

       -h, --help
              Print help on command-line usage on standard output and exit successfully.

       -L, --license, -V, --version
              Print license and version information on standard output and exit successfully.

ENVIRONMENT

       LBZIP2, BZIP2, BZIP
              Before parsing the command line, lbzip2 inserts the contents of these variables, in
              the order specified, between the invocation name and the rest of the command  line.
              Tokens are separated by spaces and tabs, which cannot be escaped.

OPERANDS

       FILE   Specify files to compress or decompress.

              FILEs  with  .bz2,  .tbz,  .tbz2  and  .tz2  name  suffixes  will  be  skipped when
              compressing. When decompressing, .bz2 suffixes will be removed in output filenames;
              .tbz,  .tbz2  and  .tz2  suffixes will be replaced by .tar; other filenames will be
              suffixed with .out. If an INT or TERM  signal  is  delivered  to  lbzip2,  then  it
              removes the regular output file currently open before exiting.

              If  no  FILE  is  given,  lbzip2  works  as  a filter, processing standard input to
              standard output. In this case, lbzip2 will decline to write compressed output to  a
              terminal  (or  read  compressed  input  from a terminal), as this would be entirely
              incomprehensible and therefore pointless.

EXIT STATUS

       0      if lbzip2 finishes successfully. This presumes that whenever it tries, lbzip2 never
              fails to write to standard error.

       1      if lbzip2 encounters a fatal error.

       4      if  lbzip2  issues  warnings without encountering a fatal error. This presumes that
              whenever it tries, lbzip2 never fails to write to standard error.

       SIGPIPE, SIGXFSZ
              if lbzip2 intends to exit with status 1 due to any fatal error, but any such signal
              with  inherited  SIG_DFL  action  was  generated for lbzip2 previously, then lbzip2
              terminates by way of one of said signals, after cleaning up any interrupted  output
              file.

       SIGABRT
              if  a  runtime  assertion  fails  (i.e.  lbzip2 detects a bug in itself). Hopefully
              whoever compiled your binary wasn't bold enough to #define NDEBUG.

       SIGINT, SIGTERM
              lbzip2 catches these signals so that it can remove an interrupted output  file.  In
              such cases, lbzip2 exits by re-raising (one of) the received signal(s).

BLOCK SIZE

       lbzip2  compresses  large  files in blocks. It can operate at various block sizes, ranging
       from 100k to 900k in 100k steps, and it allocates only as much memory as it needs to.  The
       block  size  affects  both the compression ratio achieved, and the amount of memory needed
       both for compression and decompression.  Compression and decompression speed is  virtually
       unaffected  by  block  size,  provided that the file being processed is large enough to be
       split among all worker threads.

       The flags -1 through -9 specify the block size to be 100,000 bytes through  900,000  bytes
       (the  default) respectively. At decompression-time, the block size used for compression is
       read from the compressed file -- the flags -1 to -9  are  irrelevant  to  and  so  ignored
       during decompression.

       Larger  block  sizes  give  rapidly  diminishing marginal returns; most of the compression
       comes from the first two or three hundred k of block size, a fact worth  bearing  in  mind
       when  using  lbzip2  on  small  machines.  It  is  also  important  to appreciate that the
       decompression memory requirement is set at compression-time by the choice of  block  size.
       In general you should try and use the largest block size memory constraints allow.

       Another  significant  point applies to small files. By design, only one of lbzip2's worker
       threads can work on a single block. This means  that  if  the  number  of  blocks  in  the
       compressed  file is less than the number of processors online, then some of worker threads
       will remain idle for the entire time. Compressing small files with smaller block sizes can
       therefore  significantly  increase  both  compression  and  decompression speed. The speed
       difference is more noticeable as the number of CPU cores grows.

ERROR HANDLING

       Dealing with error conditions is the least satisfactory aspect of lbzip2.  The  policy  is
       to  try  and  leave  the filesystem in a consistent state, then quit, even if it means not
       processing some of the files mentioned in the command line.

       `A consistent state' means that a file exists either in  its  compressed  or  uncompressed
       form,  but  not  both.  This  boils  down  to the rule `delete the output file if an error
       condition occurs, leaving the input intact'. Input files are only deleted when we  can  be
       pretty sure the output file has been written and closed successfully.

RESOURCE ALLOCATION

       lbzip2  needs various kinds of system resources to operate. Those include memory, threads,
       mutexes and condition variables. The policy is to simply give up if a resource  allocation
       failure occurs.

       Resource consumption grows linearly with number of worker threads. If lbzip2 fails because
       of lack of some resources, decreasing number of worker  threads  may  help.  It  would  be
       possible  for  lbzip2  to  try  to reduce number of worker threads (and hence the resource
       consumption), or to move on to subsequent files in the hope  that  some  might  need  less
       resources, but the complications for doing this seem more trouble than they are worth.

DAMAGED FILES

       lbzip2  attempts to compress data by performing several non-trivial transformations on it.
       Every compression of a file  implies  an  assumption  that  the  compressed  file  can  be
       decompressed  to  reproduce the original. Great efforts in design, coding and testing have
       been made to ensure that this program works correctly.  However,  the  complexity  of  the
       algorithms,  and,  in  particular, the presence of various special cases in the code which
       occur with very low but non-zero probability make  it  very  difficult  to  rule  out  the
       possibility  of  bugs  remaining  in  the  program.  That  is  not  to say this program is
       inherently unreliable. Indeed, I very much hope the opposite is true --  lbzip2  has  been
       carefully constructed and extensively tested.

       As  a  self-check  for  your  protection,  lbzip2  uses  32-bit CRCs to make sure that the
       decompressed version of  a  file  is  identical  to  the  original.  This  guards  against
       corruption  of  the  compressed  data,  and against undiscovered bugs in lbzip2 (hopefully
       unlikely). The chances of data corruption  going  undetected  is  microscopic,  about  one
       chance  in  four  billion for each file processed. Be aware, though, that the check occurs
       upon decompression, so it can only tell you that that something is wrong.

       CRCs can  only  detect  corrupted  files,  they  can't  help  you  recover  the  original,
       uncompressed  data.  However, because of the block nature of the compression algorithm, it
       may be possible to recover some parts of  the  damaged  file,  even  if  some  blocks  are
       destroyed.

BUGS

       Separate  input  files  don't share worker threads; at most one input file is worked on at
       any moment.

AUTHORS

       lbzip2 was originally written by Laszlo  Ersek  <lacos@caesar.elte.hu>,  http://lacos.hu/.
       Versions 2.0 and later were written by Mikolaj Izdebski.

COPYRIGHT

       Copyright (C) 2011, 2012, 2013 Mikolaj Izdebski
       Copyright (C) 2008, 2009, 2010 Laszlo Ersek
       Copyright (C) 1996 Julian Seward

       This  manual  page  is  part  of  lbzip2,  version  2.5.  lbzip2 is free software: you can
       redistribute it and/or modify it under the terms of the  GNU  General  Public  License  as
       published  by  the  Free Software Foundation, either version 3 of the License, or (at your
       option) any later version.

       lbzip2 is distributed in the hope that it  will  be  useful,  but  WITHOUT  ANY  WARRANTY;
       without  even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along  with  lbzip2.  If
       not, see <http://www.gnu.org/licenses/>.

THANKS

       Adam  Maulis  at  ELTE  IIG;  Julian Seward; Paul Sladen; Michael Thomas from Caltech HEP;
       Bryan Stillwell; Zsolt Bartos-Elekes; Imre  Csatlos;  Gabor  Kovesdan;  Paul  Wise;  Paolo
       Bonzini;  Department  of Electrical and Information Engineering at the University of Oulu;
       Yuta Mori.

SEE ALSO

       lbzip2 home page
              http://lbzip2.org/

       bzip2(1)
              http://www.bzip.org/

       pbzip2(1)
              http://compression.ca/pbzip2/

       bzip2smp(1)
              http://bzip2smp.sourceforge.net/

       smpbzip2(1)
              http://home.student.utwente.nl/n.werensteijn/smpbzip2/

       dbzip2(1)
              http://www.mediawiki.org/wiki/Dbzip2

       p7zip(1)
              http://p7zip.sourceforge.net/