Provided by: nicstat_1.95-1_amd64 bug

NAME

       nicstat, enicstat - print network traffic statistics

SYNOPSIS

       nicstat [-hvnsxpztualkMU] [-iinterface] [-Sint:mbps[fd|hd]] [interval [count]]

       enicstat <same options & operands>

DESCRIPTION

       nicstat  prints  out  network  statistics for all network cards (NICs), including packets,
       kilobytes per second, average packet sizes and more.

OPTIONS

       -h        Display brief usage information (help).

       -v        Display nicstat version (and additional fields when combined with '-l')

       -n        Show statistics for non-local (i.e. non-loopback) interfaces only.

       -s        Display summary output - just the amount of data received (read) and transmitted
                 (written).

       -x        Display extended output.  See OUTPUT section for details.

       -U        Display  separate  read  and  write  utilization  statistics.  This  affects the
                 default, extended (-x) and all (-a) format outputs. For the default  format  the
                 "Sat" statistic is dropped to fit the output in 80 columns.

       -M        Display  interface  throughput statistics in Mbps (megabits per second), instead
                 of the default KB/s (kilobytes per second).

                 NOTE - interface statistics are reported to operating systems in bytes.  nicstat
                 does  not  know  if  Ethernet  or  other  hardware overheads are included in the
                 statistic on each platform.

       -p        Display output in parseable format.  This outputs one line per interface, in the
                 following  formats  (which  correspond  to  the  default, -x, -t and -u options;
                 respectively):

              time:In:rKB/s:wKB/s:rPk/s:wPk/s:%Util:Sat
              time:In:rKB/s:wKB/s:rPk/s:wPk/s:%Util:Sat:IErr:OErr:Coll:NoCP:Defer
              time:TCP:InKB:OutKB:InSeg:OutSeg:Reset:AttF:%ReTX:InConn:OutCon:Drops
              time:UDP:InDG:OutDG:InErr:OutErr

                 where time is the number of seconds since midnight, Jan 1  1970  (UST)  and  the
                 other fields are as described in the OUTPUT section below.

                 NOTE  -  throughput  statistics  are  always  in  KB/s (kilbytes per second) for
                 parseable formats, even if the "-M" flag has been specified.

       -z        Skip interfaces for which there was zero traffic for the sample period.

       -t        Show TCP statistics.

       -u        Show UDP statistics.

       -a        Equvalent to '-x -t -u'.

       -l        Just list interfaces.

       -iinterface[,interface...]
                 Show statistics for only the interface(s) listed.  Multiple  interfaces  can  be
                 listed, separated by commas (,).

       -Sint:speed[fd|hd]
                 (Linux  only).   Specify  the  speed (and optionally duplex mode) of one or more
                 interfaces.  The given speed(s) are in megabits/second.  The  duplex  mode  will
                 default to "full" unless a suffix beginning with "h" or "H" is specified.  Speed
                 and duplex mode are obtained automatically on Solaris using  the  "ifspeed"  and
                 "link_duplex" kstat values.

       -k        (Solaris  only).   Search  for  active  network  interfaces by looking for kstat
                 "link_state" statistics with a value of 1.  This is only  of  value  on  systems
                 running  Solaris 10 (or early releases of Solaris 11 Express), with Exclusive IP
                 Zones, where the interfaces given to an Exclusive  IP  Zone  are  not  otherwise
                 visible.   If  you  are running Solaris 9 (or earlier), or Solaris 11 (or later)
                 you do not need this option.

OPERANDS

       interval  Specifies the number of seconds between samples.

       count     Specifies the number of times that the statistics are repeated.  If no count  is
                 specified, nicstat will repeat statistics indefinitely.

OUTPUT

       The fields of nicstat's display are:

       Time      The  time  corresponding  to  the  end  of  the sample shown, in HH:MM:SS format
                 (24-hour clock).

       Int       The interface name.

       rKB/s, InKB
                 Kilobytes/second read (received).

       wKB/s, OutKB
                 Kilobytes/second written (transmitted).

       rMbps, RdMbps
                 Megabits/second read (received).

       wMbps, WrMbps
                 Megabits/second written (transmitted).

       rPk/s, InSeg, InDG
                 Packets (TCP Segments, UDP Datagrams)/second read (received).

       wPk/s, OutSeg, OutDG
                 Packets (TCP Segments, UDP Datagrams)/second written (transmitted).

       rAvs      Average size of packets read (received).

       wAvs      Average size of packets written (transmitted).

       %Util     Percentage utilization of the interface.  For full-duplex  interfaces,  this  is
                 the greater of rKB/s or wKB/s as a percentage of the interface speed.  For half-
                 duplex interfaces, rKB/s and wKB/s are summed.

       %rUtil, %wUtil
                 Percentage utilization for bytes read and written, respectively.

       Sat       Saturation.  This the number of  errors/second  seen  for  the  interface  -  an
                 indicator  the  interface  may  be  approaching  saturation.   This statistic is
                 combined from a number of kernel statistics.  It is recommended to use the  '-x'
                 option to see more individual statistics (those mentioned below) when attempting
                 to diagnose a network issue.

       IErr      Packets received that could not be processed because they contained errors

       OErr      Packets that were not successfully transmitted because of errors

       Coll      Ethernet collisions during transmit.

       NoCP      No-can-puts.  This is when an incoming packet can not  be  put  to  the  process
                 reading  the  socket.   This  suggests  the  local  process is unable to process
                 incoming packets in a timely manner.

       Defer     Defer Transmits.  Packets without collisions where first  transmit  attempt  was
                 delayed because the medium was busy.

       Reset     tcpEstabResets.  The  number  of  times  TCP  connections  have  made  a  direct
                 transition to the CLOSED state from either the ESTABLISHED state or  the  CLOSE-
                 WAIT state.

       AttF      tcpAttemptFails  -  The  number of times that TCP connections have made a direct
                 transition to the CLOSED state from either the SYN-SENT state  or  the  SYN-RCVD
                 state, plus the number of times TCP connections have made a direct transition to
                 the LISTEN state from the SYN-RCVD state.

       %ReTX     Percentage of TCP segments retransmitted - that is, the number of  TCP  segments
                 transmitted containing one or more previously transmitted octets.

       InConn    tcpPassiveOpens  -  The  number of times that TCP connections have made a direct
                 transition to the SYN-RCVD state from the LISTEN state.

       OutCon    tcpActiveOpens - The number of times that TCP connections  have  made  a  direct
                 transition to the SYN-SENT state from the CLOSED state.

       Drops     tcpHalfOpenDrop + tcpListenDrop + tcpListenDropQ0.

       tcpListenDrop  and  tcpListenDropQ0  -  Number  of  connections dropped from the completed
       connection queue and incomplete connection queue, respectively.  tcpHalfOpenDrops - Number
       of connections dropped after the initial SYN packet was received.

       The  first  set  of  statistics  printed  are  averages since system boot.  If no interval
       operand is specified, or a count value of "1" is specified, this will be the  only  sample
       printed.

EXAMPLES

       Print average statistics from boot time to now only:

            $ nicstat

       Print statistics for all interfaces, every 3 seconds:

            $ nicstat 3

       Print statistics for all interfaces, every 5 seconds, finishing after 10 samples:

            $ nicstat 5 10

       Print statistics every 3 seconds, only for interfaces "hme0" and "hme1":

            $ nicstat -i hme0,hme1 3

       Print  statistics  for  non-local  interfaces,  setting  speed  of  "eth0"  and  "eth1" to
       10mbps/half-duplex and 1000mbps/full-duplex, respectively:

            $ nicstat -n -S eth0:10h,eth1:1000 5

SEE ALSO

       netstat(1M) kstat(1M), kstat(3KSTAT), mibiisa(1M), ethtool(8)

       "nicstat - the Solaris and Linux Network Monitoring Tool You  Did  Not  Know  You  Needed"
       -http://blogs.oracle.com/timc/entry/nicstat_the_solaris_and_linux

NOTES

       On Linux, the NoCP, Defer, TCP InKB, and TCP OutKB statistics are always reported as zero.

       The  way  that saturation is reported is a best effort, as there is no standardized naming
       to capture all errors related to an interface's inability to receive or transmit a packet.
       Monitoring %Util and packet rates, along with an understanding of the specific NICs may be
       more useful in judging whether you are nearing saturation.

       The -S option is provided for the Linux edition as nicstat requires  super-user  privilege
       to  obtain  speed and duplex mode information for interfaces.  If you are unable to set up
       nicstat as setuid-root, a script named enicstat  is  available,  which  uses  the  ethtool
       utility then calls nicstat with an -S value.  ethtool itself requires super-user privilege
       for this to work.