Provided by: postgresql-client-9.5_9.5.25-0ubuntu0.16.04.1_amd64 bug

NAME

       psql - PostgreSQL interactive terminal

SYNOPSIS

       psql [option...] [dbname [username]]

DESCRIPTION

       psql is a terminal-based front-end to PostgreSQL. It enables you to type in queries
       interactively, issue them to PostgreSQL, and see the query results. Alternatively, input
       can be from a file. In addition, it provides a number of meta-commands and various
       shell-like features to facilitate writing scripts and automating a wide variety of tasks.

OPTIONS

       -a
       --echo-all
           Print all nonempty input lines to standard output as they are read. (This does not
           apply to lines read interactively.) This is equivalent to setting the variable ECHO to
           all.

       -A
       --no-align
           Switches to unaligned output mode. (The default output mode is otherwise aligned.)

       -b
       --echo-errors
           Print failed SQL commands to standard error output. This is equivalent to setting the
           variable ECHO to errors.

       -c command
       --command=command
           Specifies that psql is to execute one command string, command, and then exit. This is
           useful in shell scripts. Start-up files (psqlrc and ~/.psqlrc) are ignored with this
           option.

           command must be either a command string that is completely parsable by the server
           (i.e., it contains no psql-specific features), or a single backslash command. Thus you
           cannot mix SQL and psql meta-commands with this option. To achieve that, you could
           pipe the string into psql, for example: echo '\x \\ SELECT * FROM foo;' | psql. (\\ is
           the separator meta-command.)

           If the command string contains multiple SQL commands, they are processed in a single
           transaction, unless there are explicit BEGIN/COMMIT commands included in the string to
           divide it into multiple transactions. This is different from the behavior when the
           same string is fed to psql's standard input. Also, only the result of the last SQL
           command is returned.

           Because of these legacy behaviors, putting more than one command in the -c string
           often has unexpected results. It's better to feed multiple commands to psql's standard
           input, either using echo as illustrated above, or via a shell here-document, for
           example:

               psql <<EOF
               \x
               SELECT * FROM foo;
               EOF

       -d dbname
       --dbname=dbname
           Specifies the name of the database to connect to. This is equivalent to specifying
           dbname as the first non-option argument on the command line. The dbname can be a
           connection string. If so, connection string parameters will override any conflicting
           command line options.

       -e
       --echo-queries
           Copy all SQL commands sent to the server to standard output as well. This is
           equivalent to setting the variable ECHO to queries.

       -E
       --echo-hidden
           Echo the actual queries generated by \d and other backslash commands. You can use this
           to study psql's internal operations. This is equivalent to setting the variable
           ECHO_HIDDEN to on.

       -f filename
       --file=filename
           Use the file filename as the source of commands instead of reading commands
           interactively. After the file is processed, psql terminates. This is in many ways
           equivalent to the meta-command \i.

           If filename is - (hyphen), then standard input is read until an EOF indication or \q
           meta-command. Note however that Readline is not used in this case (much as if -n had
           been specified).

           Using this option is subtly different from writing psql < filename. In general, both
           will do what you expect, but using -f enables some nice features such as error
           messages with line numbers. There is also a slight chance that using this option will
           reduce the start-up overhead. On the other hand, the variant using the shell's input
           redirection is (in theory) guaranteed to yield exactly the same output you would have
           received had you entered everything by hand.

       -F separator
       --field-separator=separator
           Use separator as the field separator for unaligned output. This is equivalent to \pset
           fieldsep or \f.

       -h hostname
       --host=hostname
           Specifies the host name of the machine on which the server is running. If the value
           begins with a slash, it is used as the directory for the Unix-domain socket.

       -H
       --html
           Turn on HTML tabular output. This is equivalent to \pset format html or the \H
           command.

       -l
       --list
           List all available databases, then exit. Other non-connection options are ignored.
           This is similar to the meta-command \list.

       -L filename
       --log-file=filename
           Write all query output into file filename, in addition to the normal output
           destination.

       -n
       --no-readline
           Do not use Readline for line editing and do not use the command history. This can be
           useful to turn off tab expansion when cutting and pasting.

       -o filename
       --output=filename
           Put all query output into file filename. This is equivalent to the command \o.

       -p port
       --port=port
           Specifies the TCP port or the local Unix-domain socket file extension on which the
           server is listening for connections. Defaults to the value of the PGPORT environment
           variable or, if not set, to the port specified at compile time, usually 5432.

       -P assignment
       --pset=assignment
           Specifies printing options, in the style of \pset. Note that here you have to separate
           name and value with an equal sign instead of a space. For example, to set the output
           format to LaTeX, you could write -P format=latex.

       -q
       --quiet
           Specifies that psql should do its work quietly. By default, it prints welcome messages
           and various informational output. If this option is used, none of this happens. This
           is useful with the -c option. This is equivalent to setting the variable QUIET to on.

       -R separator
       --record-separator=separator
           Use separator as the record separator for unaligned output. This is equivalent to the
           \pset recordsep command.

       -s
       --single-step
           Run in single-step mode. That means the user is prompted before each command is sent
           to the server, with the option to cancel execution as well. Use this to debug scripts.

       -S
       --single-line
           Runs in single-line mode where a newline terminates an SQL command, as a semicolon
           does.

               Note
               This mode is provided for those who insist on it, but you are not necessarily
               encouraged to use it. In particular, if you mix SQL and meta-commands on a line
               the order of execution might not always be clear to the inexperienced user.

       -t
       --tuples-only
           Turn off printing of column names and result row count footers, etc. This is
           equivalent to the \t command.

       -T table_options
       --table-attr=table_options
           Specifies options to be placed within the HTML table tag. See \pset for details.

       -U username
       --username=username
           Connect to the database as the user username instead of the default. (You must have
           permission to do so, of course.)

       -v assignment
       --set=assignment
       --variable=assignment
           Perform a variable assignment, like the \set meta-command. Note that you must separate
           name and value, if any, by an equal sign on the command line. To unset a variable,
           leave off the equal sign. To set a variable with an empty value, use the equal sign
           but leave off the value. These assignments are done during a very early stage of
           start-up, so variables reserved for internal purposes might get overwritten later.

       -V
       --version
           Print the psql version and exit.

       -w
       --no-password
           Never issue a password prompt. If the server requires password authentication and a
           password is not available from other sources such as a .pgpass file, the connection
           attempt will fail. This option can be useful in batch jobs and scripts where no user
           is present to enter a password.

           Note that this option will remain set for the entire session, and so it affects uses
           of the meta-command \connect as well as the initial connection attempt.

       -W
       --password
           Force psql to prompt for a password before connecting to a database, even if the
           password will not be used.

           If the server requires password authentication and a password is not available from
           other sources such as a .pgpass file, psql will prompt for a password in any case.
           However, psql will waste a connection attempt finding out that the server wants a
           password. In some cases it is worth typing -W to avoid the extra connection attempt.

           Note that this option will remain set for the entire session, and so it affects uses
           of the meta-command \connect as well as the initial connection attempt.

       -x
       --expanded
           Turn on the expanded table formatting mode. This is equivalent to the \x command.

       -X,
       --no-psqlrc
           Do not read the start-up file (neither the system-wide psqlrc file nor the user's
           ~/.psqlrc file).

       -z
       --field-separator-zero
           Set the field separator for unaligned output to a zero byte.

       -0
       --record-separator-zero
           Set the record separator for unaligned output to a zero byte. This is useful for
           interfacing, for example, with xargs -0.

       -1
       --single-transaction
           When psql executes a script, adding this option wraps BEGIN/COMMIT around the script
           to execute it as a single transaction. This ensures that either all the commands
           complete successfully, or no changes are applied.

           If the script itself uses BEGIN, COMMIT, or ROLLBACK, this option will not have the
           desired effects. Also, if the script contains any command that cannot be executed
           inside a transaction block, specifying this option will cause that command (and hence
           the whole transaction) to fail.

       -?
       --help[=topic]
           Show help about psql and exit. The optional topic parameter (defaulting to options)
           selects which part of psql is explained: commands describes psql's backslash commands;
           options describes the command-line options that can be passed to psql; and variables
           shows help about psql configuration variables.

EXIT STATUS

       psql returns 0 to the shell if it finished normally, 1 if a fatal error of its own occurs
       (e.g., out of memory, file not found), 2 if the connection to the server went bad and the
       session was not interactive, and 3 if an error occurred in a script and the variable
       ON_ERROR_STOP was set.

USAGE

   Connecting to a Database
       psql is a regular PostgreSQL client application. In order to connect to a database you
       need to know the name of your target database, the host name and port number of the
       server, and what user name you want to connect as.  psql can be told about those
       parameters via command line options, namely -d, -h, -p, and -U respectively. If an
       argument is found that does not belong to any option it will be interpreted as the
       database name (or the user name, if the database name is already given). Not all of these
       options are required; there are useful defaults. If you omit the host name, psql will
       connect via a Unix-domain socket to a server on the local host, or via TCP/IP to localhost
       on machines that don't have Unix-domain sockets. The default port number is determined at
       compile time. Since the database server uses the same default, you will not have to
       specify the port in most cases. The default user name is your operating-system user name,
       as is the default database name. Note that you cannot just connect to any database under
       any user name. Your database administrator should have informed you about your access
       rights.

       When the defaults aren't quite right, you can save yourself some typing by setting the
       environment variables PGDATABASE, PGHOST, PGPORT and/or PGUSER to appropriate values. (For
       additional environment variables, see Section 31.14, “Environment Variables”, in the
       documentation.) It is also convenient to have a ~/.pgpass file to avoid regularly having
       to type in passwords. See Section 31.15, “The Password File”, in the documentation for
       more information.

       An alternative way to specify connection parameters is in a conninfo string or a URI,
       which is used instead of a database name. This mechanism give you very wide control over
       the connection. For example:

           $ psql "service=myservice sslmode=require"
           $ psql postgresql://dbmaster:5433/mydb?sslmode=require

       This way you can also use LDAP for connection parameter lookup as described in Section
       31.17, “LDAP Lookup of Connection Parameters”, in the documentation. See Section 31.1.2,
       “Parameter Key Words”, in the documentation for more information on all the available
       connection options.

       If the connection could not be made for any reason (e.g., insufficient privileges, server
       is not running on the targeted host, etc.), psql will return an error and terminate.

       If both standard input and standard output are a terminal, then psql sets the client
       encoding to “auto”, which will detect the appropriate client encoding from the locale
       settings (LC_CTYPE environment variable on Unix systems). If this doesn't work out as
       expected, the client encoding can be overridden using the environment variable
       PGCLIENTENCODING.

   Entering SQL Commands
       In normal operation, psql provides a prompt with the name of the database to which psql is
       currently connected, followed by the string =>. For example:

           $ psql testdb
           psql (9.5.25)
           Type "help" for help.

           testdb=>

       At the prompt, the user can type in SQL commands. Ordinarily, input lines are sent to the
       server when a command-terminating semicolon is reached. An end of line does not terminate
       a command. Thus commands can be spread over several lines for clarity. If the command was
       sent and executed without error, the results of the command are displayed on the screen.

       If untrusted users have access to a database that has not adopted a secure schema usage
       pattern, begin your session by removing publicly-writable schemas from search_path. One
       can add options=-csearch_path= to the connection string or issue SELECT
       pg_catalog.set_config('search_path', '', false) before other SQL commands. This
       consideration is not specific to psql; it applies to every interface for executing
       arbitrary SQL commands.

       Whenever a command is executed, psql also polls for asynchronous notification events
       generated by LISTEN(7) and NOTIFY(7).

       While C-style block comments are passed to the server for processing and removal,
       SQL-standard comments are removed by psql.

   Meta-Commands
       Anything you enter in psql that begins with an unquoted backslash is a psql meta-command
       that is processed by psql itself. These commands make psql more useful for administration
       or scripting. Meta-commands are often called slash or backslash commands.

       The format of a psql command is the backslash, followed immediately by a command verb,
       then any arguments. The arguments are separated from the command verb and each other by
       any number of whitespace characters.

       To include whitespace in an argument you can quote it with single quotes. To include a
       single quote in an argument, write two single quotes within single-quoted text. Anything
       contained in single quotes is furthermore subject to C-like substitutions for \n (new
       line), \t (tab), \b (backspace), \r (carriage return), \f (form feed), \digits (octal),
       and \xdigits (hexadecimal). A backslash preceding any other character within single-quoted
       text quotes that single character, whatever it is.

       Within an argument, text that is enclosed in backquotes (`) is taken as a command line
       that is passed to the shell. The output of the command (with any trailing newline removed)
       replaces the backquoted text.

       If an unquoted colon (:) followed by a psql variable name appears within an argument, it
       is replaced by the variable's value, as described in SQL Interpolation.

       Some commands take an SQL identifier (such as a table name) as argument. These arguments
       follow the syntax rules of SQL: Unquoted letters are forced to lowercase, while double
       quotes (") protect letters from case conversion and allow incorporation of whitespace into
       the identifier. Within double quotes, paired double quotes reduce to a single double quote
       in the resulting name. For example, FOO"BAR"BAZ is interpreted as fooBARbaz, and "A
       weird"" name" becomes A weird" name.

       Parsing for arguments stops at the end of the line, or when another unquoted backslash is
       found. An unquoted backslash is taken as the beginning of a new meta-command. The special
       sequence \\ (two backslashes) marks the end of arguments and continues parsing SQL
       commands, if any. That way SQL and psql commands can be freely mixed on a line. But in any
       case, the arguments of a meta-command cannot continue beyond the end of the line.

       The following meta-commands are defined:

       \a
           If the current table output format is unaligned, it is switched to aligned. If it is
           not unaligned, it is set to unaligned. This command is kept for backwards
           compatibility. See \pset for a more general solution.

       \c or \connect [ -reuse-previous=on|off ] [ dbname [ username ] [ host ] [ port ] |
       conninfo ]
           Establishes a new connection to a PostgreSQL server. The connection parameters to use
           can be specified either using a positional syntax (one or more of database name, user,
           host, and port), or using a conninfo connection string as detailed in Section 31.1.1,
           “Connection Strings”, in the documentation. If no arguments are given, a new
           connection is made using the same parameters as before.

           Specifying any of dbname, username, host or port as - is equivalent to omitting that
           parameter.

           The new connection can re-use connection parameters from the previous connection; not
           only database name, user, host, and port, but other settings such as sslmode. By
           default, parameters are re-used in the positional syntax, but not when a conninfo
           string is given. Passing a first argument of -reuse-previous=on or -reuse-previous=off
           overrides that default. If parameters are re-used, then any parameter not explicitly
           specified as a positional parameter or in the conninfo string is taken from the
           existing connection's parameters. An exception is that if the host setting is changed
           from its previous value using the positional syntax, any hostaddr setting present in
           the existing connection's parameters is dropped. Also, any password used for the
           existing connection will be re-used only if the user, host, and port settings are not
           changed. When the command neither specifies nor reuses a particular parameter, the
           libpq default is used.

           If the new connection is successfully made, the previous connection is closed. If the
           connection attempt fails (wrong user name, access denied, etc.), the previous
           connection will be kept if psql is in interactive mode. But when executing a
           non-interactive script, processing will immediately stop with an error. This
           distinction was chosen as a user convenience against typos on the one hand, and a
           safety mechanism that scripts are not accidentally acting on the wrong database on the
           other hand.

           Examples:

               => \c mydb myuser host.dom 6432
               => \c service=foo
               => \c "host=localhost port=5432 dbname=mydb connect_timeout=10 sslmode=disable"
               => \c -reuse-previous=on sslmode=require    -- changes only sslmode
               => \c postgresql://tom@localhost/mydb?application_name=myapp

       \C [ title ]
           Sets the title of any tables being printed as the result of a query or unset any such
           title. This command is equivalent to \pset title title. (The name of this command
           derives from “caption”, as it was previously only used to set the caption in an HTML
           table.)

       \cd [ directory ]
           Changes the current working directory to directory. Without argument, changes to the
           current user's home directory.

               Tip
               To print your current working directory, use \! pwd.

       \conninfo
           Outputs information about the current database connection.

       \copy { table [ ( column_list ) ] | ( query ) } { from | to } { 'filename' | program
       'command' | stdin | stdout | pstdin | pstdout } [ [ with ] ( option [, ...] ) ]
           Performs a frontend (client) copy. This is an operation that runs an SQL COPY(7)
           command, but instead of the server reading or writing the specified file, psql reads
           or writes the file and routes the data between the server and the local file system.
           This means that file accessibility and privileges are those of the local user, not the
           server, and no SQL superuser privileges are required.

           When program is specified, command is executed by psql and the data passed from or to
           command is routed between the server and the client. Again, the execution privileges
           are those of the local user, not the server, and no SQL superuser privileges are
           required.

           For \copy ... from stdin, data rows are read from the same source that issued the
           command, continuing until \.  is read or the stream reaches EOF. This option is useful
           for populating tables in-line within a SQL script file. For \copy ... to stdout,
           output is sent to the same place as psql command output, and the COPY count command
           status is not printed (since it might be confused with a data row). To read/write
           psql's standard input or output regardless of the current command source or \o option,
           write from pstdin or to pstdout.

           The syntax of this command is similar to that of the SQL COPY(7) command. All options
           other than the data source/destination are as specified for COPY(7). Because of this,
           special parsing rules apply to the \copy command. In particular, psql's variable
           substitution rules and backslash escapes do not apply.

               Tip
               Another way to obtain the same result as \copy ... to is to use the SQL COPY ...
               TO STDOUT command and terminate it with \g filename or \g |program. Unlike \copy,
               this method allows the command to span multiple lines; also, variable
               interpolation and backquote expansion can be used.

               Tip
               These operations are not as efficient as the SQL COPY command with a file or
               program data source or destination, because all data must pass through the
               client/server connection. For large amounts of data the SQL command might be
               preferable.

       \copyright
           Shows the copyright and distribution terms of PostgreSQL.

       \d[S+] [ pattern ]
           For each relation (table, view, materialized view, index, sequence, or foreign table)
           or composite type matching the pattern, show all columns, their types, the tablespace
           (if not the default) and any special attributes such as NOT NULL or defaults.
           Associated indexes, constraints, rules, and triggers are also shown. For foreign
           tables, the associated foreign server is shown as well. (“Matching the pattern” is
           defined in Patterns below.)

           For some types of relation, \d shows additional information for each column: column
           values for sequences, indexed expressions for indexes, and foreign data wrapper
           options for foreign tables.

           The command form \d+ is identical, except that more information is displayed: any
           comments associated with the columns of the table are shown, as is the presence of
           OIDs in the table, the view definition if the relation is a view, a non-default
           replica identity setting.

           By default, only user-created objects are shown; supply a pattern or the S modifier to
           include system objects.

               Note
               If \d is used without a pattern argument, it is equivalent to \dtvmsE which will
               show a list of all visible tables, views, materialized views, sequences and
               foreign tables. This is purely a convenience measure.

       \da[S] [ pattern ]
           Lists aggregate functions, together with their return type and the data types they
           operate on. If pattern is specified, only aggregates whose names match the pattern are
           shown. By default, only user-created objects are shown; supply a pattern or the S
           modifier to include system objects.

       \db[+] [ pattern ]
           Lists tablespaces. If pattern is specified, only tablespaces whose names match the
           pattern are shown. If + is appended to the command name, each tablespace is listed
           with its associated options, on-disk size, permissions and description.

       \dc[S+] [ pattern ]
           Lists conversions between character-set encodings. If pattern is specified, only
           conversions whose names match the pattern are listed. By default, only user-created
           objects are shown; supply a pattern or the S modifier to include system objects. If +
           is appended to the command name, each object is listed with its associated
           description.

       \dC[+] [ pattern ]
           Lists type casts. If pattern is specified, only casts whose source or target types
           match the pattern are listed. If + is appended to the command name, each object is
           listed with its associated description.

       \dd[S] [ pattern ]
           Shows the descriptions of objects of type constraint, operator class, operator family,
           rule, and trigger. All other comments may be viewed by the respective backslash
           commands for those object types.

           \dd displays descriptions for objects matching the pattern, or of visible objects of
           the appropriate type if no argument is given. But in either case, only objects that
           have a description are listed. By default, only user-created objects are shown; supply
           a pattern or the S modifier to include system objects.

           Descriptions for objects can be created with the COMMENT(7) SQL command.

       \ddp [ pattern ]
           Lists default access privilege settings. An entry is shown for each role (and schema,
           if applicable) for which the default privilege settings have been changed from the
           built-in defaults. If pattern is specified, only entries whose role name or schema
           name matches the pattern are listed.

           The ALTER DEFAULT PRIVILEGES (ALTER_DEFAULT_PRIVILEGES(7)) command is used to set
           default access privileges. The meaning of the privilege display is explained under
           GRANT(7).

       \dD[S+] [ pattern ]
           Lists domains. If pattern is specified, only domains whose names match the pattern are
           shown. By default, only user-created objects are shown; supply a pattern or the S
           modifier to include system objects. If + is appended to the command name, each object
           is listed with its associated permissions and description.

       \dE[S+] [ pattern ]
       \di[S+] [ pattern ]
       \dm[S+] [ pattern ]
       \ds[S+] [ pattern ]
       \dt[S+] [ pattern ]
       \dv[S+] [ pattern ]
           In this group of commands, the letters E, i, m, s, t, and v stand for foreign table,
           index, materialized view, sequence, table, and view, respectively. You can specify any
           or all of these letters, in any order, to obtain a listing of objects of these types.
           For example, \dit lists indexes and tables. If + is appended to the command name, each
           object is listed with its physical size on disk and its associated description, if
           any. If pattern is specified, only objects whose names match the pattern are listed.
           By default, only user-created objects are shown; supply a pattern or the S modifier to
           include system objects.

       \des[+] [ pattern ]
           Lists foreign servers (mnemonic: “external servers”). If pattern is specified, only
           those servers whose name matches the pattern are listed. If the form \des+ is used, a
           full description of each server is shown, including the server's ACL, type, version,
           options, and description.

       \det[+] [ pattern ]
           Lists foreign tables (mnemonic: “external tables”). If pattern is specified, only
           entries whose table name or schema name matches the pattern are listed. If the form
           \det+ is used, generic options and the foreign table description are also displayed.

       \deu[+] [ pattern ]
           Lists user mappings (mnemonic: “external users”). If pattern is specified, only those
           mappings whose user names match the pattern are listed. If the form \deu+ is used,
           additional information about each mapping is shown.

               Caution
               \deu+ might also display the user name and password of the remote user, so care
               should be taken not to disclose them.

       \dew[+] [ pattern ]
           Lists foreign-data wrappers (mnemonic: “external wrappers”). If pattern is specified,
           only those foreign-data wrappers whose name matches the pattern are listed. If the
           form \dew+ is used, the ACL, options, and description of the foreign-data wrapper are
           also shown.

       \df[antwS+] [ pattern ]
           Lists functions, together with their arguments, return types, and function types,
           which are classified as “agg” (aggregate), “normal”, “trigger”, or “window”. To
           display only functions of specific type(s), add the corresponding letters a, n, t, or
           w to the command. If pattern is specified, only functions whose names match the
           pattern are shown. By default, only user-created objects are shown; supply a pattern
           or the S modifier to include system objects. If the form \df+ is used, additional
           information about each function is shown, including security classification,
           volatility, owner, language, source code and description.

               Tip
               To look up functions taking arguments or returning values of a specific type, use
               your pager's search capability to scroll through the \df output.

       \dF[+] [ pattern ]
           Lists text search configurations. If pattern is specified, only configurations whose
           names match the pattern are shown. If the form \dF+ is used, a full description of
           each configuration is shown, including the underlying text search parser and the
           dictionary list for each parser token type.

       \dFd[+] [ pattern ]
           Lists text search dictionaries. If pattern is specified, only dictionaries whose names
           match the pattern are shown. If the form \dFd+ is used, additional information is
           shown about each selected dictionary, including the underlying text search template
           and the option values.

       \dFp[+] [ pattern ]
           Lists text search parsers. If pattern is specified, only parsers whose names match the
           pattern are shown. If the form \dFp+ is used, a full description of each parser is
           shown, including the underlying functions and the list of recognized token types.

       \dFt[+] [ pattern ]
           Lists text search templates. If pattern is specified, only templates whose names match
           the pattern are shown. If the form \dFt+ is used, additional information is shown
           about each template, including the underlying function names.

       \dg[+] [ pattern ]
           Lists database roles. (Since the concepts of “users” and “groups” have been unified
           into “roles”, this command is now equivalent to \du.) If pattern is specified, only
           those roles whose names match the pattern are listed. If the form \dg+ is used,
           additional information is shown about each role; currently this adds the comment for
           each role.

       \dl
           This is an alias for \lo_list, which shows a list of large objects.

       \dL[S+] [ pattern ]
           Lists procedural languages. If pattern is specified, only languages whose names match
           the pattern are listed. By default, only user-created languages are shown; supply the
           S modifier to include system objects. If + is appended to the command name, each
           language is listed with its call handler, validator, access privileges, and whether it
           is a system object.

       \dn[S+] [ pattern ]
           Lists schemas (namespaces). If pattern is specified, only schemas whose names match
           the pattern are listed. By default, only user-created objects are shown; supply a
           pattern or the S modifier to include system objects. If + is appended to the command
           name, each object is listed with its associated permissions and description, if any.

       \do[S+] [ pattern ]
           Lists operators with their operand and result types. If pattern is specified, only
           operators whose names match the pattern are listed. By default, only user-created
           objects are shown; supply a pattern or the S modifier to include system objects. If +
           is appended to the command name, additional information about each operator is shown,
           currently just the name of the underlying function.

       \dO[S+] [ pattern ]
           Lists collations. If pattern is specified, only collations whose names match the
           pattern are listed. By default, only user-created objects are shown; supply a pattern
           or the S modifier to include system objects. If + is appended to the command name,
           each collation is listed with its associated description, if any. Note that only
           collations usable with the current database's encoding are shown, so the results may
           vary in different databases of the same installation.

       \dp [ pattern ]
           Lists tables, views and sequences with their associated access privileges. If pattern
           is specified, only tables, views and sequences whose names match the pattern are
           listed.

           The GRANT(7) and REVOKE(7) commands are used to set access privileges. The meaning of
           the privilege display is explained under GRANT(7).

       \drds [ role-pattern [ database-pattern ] ]
           Lists defined configuration settings. These settings can be role-specific,
           database-specific, or both.  role-pattern and database-pattern are used to select
           specific roles and databases to list, respectively. If omitted, or if * is specified,
           all settings are listed, including those not role-specific or database-specific,
           respectively.

           The ALTER ROLE (ALTER_ROLE(7)) and ALTER DATABASE (ALTER_DATABASE(7)) commands are
           used to define per-role and per-database configuration settings.

       \dT[S+] [ pattern ]
           Lists data types. If pattern is specified, only types whose names match the pattern
           are listed. If + is appended to the command name, each type is listed with its
           internal name and size, its allowed values if it is an enum type, and its associated
           permissions. By default, only user-created objects are shown; supply a pattern or the
           S modifier to include system objects.

       \du[+] [ pattern ]
           Lists database roles. (Since the concepts of “users” and “groups” have been unified
           into “roles”, this command is now equivalent to \dg.) If pattern is specified, only
           those roles whose names match the pattern are listed. If the form \du+ is used,
           additional information is shown about each role; currently this adds the comment for
           each role.

       \dx[+] [ pattern ]
           Lists installed extensions. If pattern is specified, only those extensions whose names
           match the pattern are listed. If the form \dx+ is used, all the objects belonging to
           each matching extension are listed.

       \dy[+] [ pattern ]
           Lists event triggers. If pattern is specified, only those event triggers whose names
           match the pattern are listed. If + is appended to the command name, each object is
           listed with its associated description.

       \e or \edit [ filename ] [ line_number ]
           If filename is specified, the file is edited; after the editor exits, its content is
           copied back to the query buffer. If no filename is given, the current query buffer is
           copied to a temporary file which is then edited in the same fashion.

           The new query buffer is then re-parsed according to the normal rules of psql, where
           the whole buffer is treated as a single line. (Thus you cannot make scripts this way.
           Use \i for that.) This means that if the query ends with (or contains) a semicolon, it
           is immediately executed. Otherwise it will merely wait in the query buffer; type
           semicolon or \g to send it, or \r to cancel.

           If a line number is specified, psql will position the cursor on the specified line of
           the file or query buffer. Note that if a single all-digits argument is given, psql
           assumes it is a line number, not a file name.

               Tip
               See under ENVIRONMENT for how to configure and customize your editor.

       \echo text [ ... ]
           Prints the arguments to the standard output, separated by one space and followed by a
           newline. This can be useful to intersperse information in the output of scripts. For
           example:

               => \echo `date`
               Tue Oct 26 21:40:57 CEST 1999

           If the first argument is an unquoted -n the trailing newline is not written.

               Tip
               If you use the \o command to redirect your query output you might wish to use
               \qecho instead of this command.

       \ef [ function_description [ line_number ] ]
           This command fetches and edits the definition of the named function, in the form of a
           CREATE OR REPLACE FUNCTION command. Editing is done in the same way as for \edit.
           After the editor exits, the updated command waits in the query buffer; type semicolon
           or \g to send it, or \r to cancel.

           The target function can be specified by name alone, or by name and arguments, for
           example foo(integer, text). The argument types must be given if there is more than one
           function of the same name.

           If no function is specified, a blank CREATE FUNCTION template is presented for
           editing.

           If a line number is specified, psql will position the cursor on the specified line of
           the function body. (Note that the function body typically does not begin on the first
           line of the file.)

               Tip
               See under ENVIRONMENT for how to configure and customize your editor.

       \encoding [ encoding ]
           Sets the client character set encoding. Without an argument, this command shows the
           current encoding.

       \f [ string ]
           Sets the field separator for unaligned query output. The default is the vertical bar
           (|). See also \pset for a generic way of setting output options.

       \g [ filename ]
       \g [ |command ]
           Sends the current query input buffer to the server, and optionally stores the query's
           output in filename or pipes the output to the shell command command. The file or
           command is written to only if the query successfully returns zero or more tuples, not
           if the query fails or is a non-data-returning SQL command.

           A bare \g is essentially equivalent to a semicolon. A \g with argument is a “one-shot”
           alternative to the \o command.

       \gset [ prefix ]
           Sends the current query input buffer to the server and stores the query's output into
           psql variables (see Variables). The query to be executed must return exactly one row.
           Each column of the row is stored into a separate variable, named the same as the
           column. For example:

               => SELECT 'hello' AS var1, 10 AS var2
               -> \gset
               => \echo :var1 :var2
               hello 10

           If you specify a prefix, that string is prepended to the query's column names to
           create the variable names to use:

               => SELECT 'hello' AS var1, 10 AS var2
               -> \gset result_
               => \echo :result_var1 :result_var2
               hello 10

           If a column result is NULL, the corresponding variable is unset rather than being set.

           If the query fails or does not return one row, no variables are changed.

       \h or \help [ command ]
           Gives syntax help on the specified SQL command. If command is not specified, then psql
           will list all the commands for which syntax help is available. If command is an
           asterisk (*), then syntax help on all SQL commands is shown.

               Note
               To simplify typing, commands that consists of several words do not have to be
               quoted. Thus it is fine to type \help alter table.

       \H or \html
           Turns on HTML query output format. If the HTML format is already on, it is switched
           back to the default aligned text format. This command is for compatibility and
           convenience, but see \pset about setting other output options.

       \i or \include filename
           Reads input from the file filename and executes it as though it had been typed on the
           keyboard.

           If filename is - (hyphen), then standard input is read until an EOF indication or \q
           meta-command. This can be used to intersperse interactive input with input from files.
           Note that Readline behavior will be used only if it is active at the outermost level.

               Note
               If you want to see the lines on the screen as they are read you must set the
               variable ECHO to all.

       \ir or \include_relative filename
           The \ir command is similar to \i, but resolves relative file names differently. When
           executing in interactive mode, the two commands behave identically. However, when
           invoked from a script, \ir interprets file names relative to the directory in which
           the script is located, rather than the current working directory.

       \l[+] or \list[+] [ pattern ]
           List the databases in the server and show their names, owners, character set
           encodings, and access privileges. If pattern is specified, only databases whose names
           match the pattern are listed. If + is appended to the command name, database sizes,
           default tablespaces, and descriptions are also displayed. (Size information is only
           available for databases that the current user can connect to.)

       \lo_export loid filename
           Reads the large object with OID loid from the database and writes it to filename. Note
           that this is subtly different from the server function lo_export, which acts with the
           permissions of the user that the database server runs as and on the server's file
           system.

               Tip
               Use \lo_list to find out the large object's OID.

       \lo_import filename [ comment ]
           Stores the file into a PostgreSQL large object. Optionally, it associates the given
           comment with the object. Example:

               foo=> \lo_import '/home/peter/pictures/photo.xcf' 'a picture of me'
               lo_import 152801

           The response indicates that the large object received object ID 152801, which can be
           used to access the newly-created large object in the future. For the sake of
           readability, it is recommended to always associate a human-readable comment with every
           object. Both OIDs and comments can be viewed with the \lo_list command.

           Note that this command is subtly different from the server-side lo_import because it
           acts as the local user on the local file system, rather than the server's user and
           file system.

       \lo_list
           Shows a list of all PostgreSQL large objects currently stored in the database, along
           with any comments provided for them.

       \lo_unlink loid
           Deletes the large object with OID loid from the database.

               Tip
               Use \lo_list to find out the large object's OID.

       \o or \out [ filename ]
       \o or \out [ |command ]
           Arranges to save future query results to the file filename or pipe future results to
           the shell command command. If no argument is specified, the query output is reset to
           the standard output.

           “Query results” includes all tables, command responses, and notices obtained from the
           database server, as well as output of various backslash commands that query the
           database (such as \d), but not error messages.

               Tip
               To intersperse text output in between query results, use \qecho.

       \p or \print
           Print the current query buffer to the standard output.

       \password [ username ]
           Changes the password of the specified user (by default, the current user). This
           command prompts for the new password, encrypts it, and sends it to the server as an
           ALTER ROLE command. This makes sure that the new password does not appear in cleartext
           in the command history, the server log, or elsewhere.

       \prompt [ text ] name
           Prompts the user to supply text, which is assigned to the variable name. An optional
           prompt string, text, can be specified. (For multiword prompts, surround the text with
           single quotes.)

           By default, \prompt uses the terminal for input and output. However, if the -f command
           line switch was used, \prompt uses standard input and standard output.

       \pset [ option [ value ] ]
           This command sets options affecting the output of query result tables.  option
           indicates which option is to be set. The semantics of value vary depending on the
           selected option. For some options, omitting value causes the option to be toggled or
           unset, as described under the particular option. If no such behavior is mentioned,
           then omitting value just results in the current setting being displayed.

           \pset without any arguments displays the current status of all printing options.

           Adjustable printing options are:

           border
               The value must be a number. In general, the higher the number the more borders and
               lines the tables will have, but details depend on the particular format. In HTML
               format, this will translate directly into the border=...  attribute. In most other
               formats only values 0 (no border), 1 (internal dividing lines), and 2 (table
               frame) make sense, and values above 2 will be treated the same as border = 2. The
               latex and latex-longtable formats additionally allow a value of 3 to add dividing
               lines between data rows.

           columns
               Sets the target width for the wrapped format, and also the width limit for
               determining whether output is wide enough to require the pager or switch to the
               vertical display in expanded auto mode. Zero (the default) causes the target width
               to be controlled by the environment variable COLUMNS, or the detected screen width
               if COLUMNS is not set. In addition, if columns is zero then the wrapped format
               only affects screen output. If columns is nonzero then file and pipe output is
               wrapped to that width as well.

           expanded (or x)
               If value is specified it must be either on or off, which will enable or disable
               expanded mode, or auto. If value is omitted the command toggles between the on and
               off settings. When expanded mode is enabled, query results are displayed in two
               columns, with the column name on the left and the data on the right. This mode is
               useful if the data wouldn't fit on the screen in the normal “horizontal” mode. In
               the auto setting, the expanded mode is used whenever the query output is wider
               than the screen, otherwise the regular mode is used. The auto setting is only
               effective in the aligned and wrapped formats. In other formats, it always behaves
               as if the expanded mode is off.

           fieldsep
               Specifies the field separator to be used in unaligned output format. That way one
               can create, for example, tab- or comma-separated output, which other programs
               might prefer. To set a tab as field separator, type \pset fieldsep '\t'. The
               default field separator is '|' (a vertical bar).

           fieldsep_zero
               Sets the field separator to use in unaligned output format to a zero byte.

           footer
               If value is specified it must be either on or off which will enable or disable
               display of the table footer (the (n rows) count). If value is omitted the command
               toggles footer display on or off.

           format
               Sets the output format to one of unaligned, aligned, wrapped, html, asciidoc,
               latex (uses tabular), latex-longtable, or troff-ms. Unique abbreviations are
               allowed.

               unaligned format writes all columns of a row on one line, separated by the
               currently active field separator. This is useful for creating output that might be
               intended to be read in by other programs (for example, tab-separated or
               comma-separated format).

               aligned format is the standard, human-readable, nicely formatted text output; this
               is the default.

               wrapped format is like aligned but wraps wide data values across lines to make the
               output fit in the target column width. The target width is determined as described
               under the columns option. Note that psql will not attempt to wrap column header
               titles; therefore, wrapped format behaves the same as aligned if the total width
               needed for column headers exceeds the target.

               The html, asciidoc, latex, latex-longtable, and troff-ms formats put out tables
               that are intended to be included in documents using the respective mark-up
               language. They are not complete documents! This might not be necessary in HTML,
               but in LaTeX you must have a complete document wrapper.  latex-longtable also
               requires the LaTeX longtable and booktabs packages.

           linestyle
               Sets the border line drawing style to one of ascii, old-ascii or unicode. Unique
               abbreviations are allowed. (That would mean one letter is enough.) The default
               setting is ascii. This option only affects the aligned and wrapped output formats.

               ascii style uses plain ASCII characters. Newlines in data are shown using a +
               symbol in the right-hand margin. When the wrapped format wraps data from one line
               to the next without a newline character, a dot (.) is shown in the right-hand
               margin of the first line, and again in the left-hand margin of the following line.

               old-ascii style uses plain ASCII characters, using the formatting style used in
               PostgreSQL 8.4 and earlier. Newlines in data are shown using a : symbol in place
               of the left-hand column separator. When the data is wrapped from one line to the
               next without a newline character, a ; symbol is used in place of the left-hand
               column separator.

               unicode style uses Unicode box-drawing characters. Newlines in data are shown
               using a carriage return symbol in the right-hand margin. When the data is wrapped
               from one line to the next without a newline character, an ellipsis symbol is shown
               in the right-hand margin of the first line, and again in the left-hand margin of
               the following line.

               When the border setting is greater than zero, the linestyle option also determines
               the characters with which the border lines are drawn. Plain ASCII characters work
               everywhere, but Unicode characters look nicer on displays that recognize them.

           null
               Sets the string to be printed in place of a null value. The default is to print
               nothing, which can easily be mistaken for an empty string. For example, one might
               prefer \pset null '(null)'.

           numericlocale
               If value is specified it must be either on or off which will enable or disable
               display of a locale-specific character to separate groups of digits to the left of
               the decimal marker. If value is omitted the command toggles between regular and
               locale-specific numeric output.

           pager
               Controls use of a pager program for query and psql help output. If the environment
               variable PAGER is set, the output is piped to the specified program. Otherwise a
               platform-dependent default (such as more) is used.

               When the pager option is off, the pager program is not used. When the pager option
               is on, the pager is used when appropriate, i.e., when the output is to a terminal
               and will not fit on the screen. The pager option can also be set to always, which
               causes the pager to be used for all terminal output regardless of whether it fits
               on the screen.  \pset pager without a value toggles pager use on and off.

           pager_min_lines
               If pager_min_lines is set to a number greater than the page height, the pager
               program will not be called unless there are at least this many lines of output to
               show. The default setting is 0.

           recordsep
               Specifies the record (line) separator to use in unaligned output format. The
               default is a newline character.

           recordsep_zero
               Sets the record separator to use in unaligned output format to a zero byte.

           tableattr (or T)
               In HTML format, this specifies attributes to be placed inside the table tag. This
               could for example be cellpadding or bgcolor. Note that you probably don't want to
               specify border here, as that is already taken care of by \pset border. If no value
               is given, the table attributes are unset.

               In latex-longtable format, this controls the proportional width of each column
               containing a left-aligned data type. It is specified as a whitespace-separated
               list of values, e.g., '0.2 0.2 0.6'. Unspecified output columns use the last
               specified value.

           title
               Sets the table title for any subsequently printed tables. This can be used to give
               your output descriptive tags. If no value is given, the title is unset.

           tuples_only (or t)
               If value is specified it must be either on or off which will enable or disable
               tuples-only mode. If value is omitted the command toggles between regular and
               tuples-only output. Regular output includes extra information such as column
               headers, titles, and various footers. In tuples-only mode, only actual table data
               is shown.

           unicode_border_linestyle
               Sets the border drawing style for the unicode line style to one of single or
               double.

           unicode_column_linestyle
               Sets the column drawing style for the unicode line style to one of single or
               double.

           unicode_header_linestyle
               Sets the header drawing style for the unicode line style to one of single or
               double.

           Illustrations of how these different formats look can be seen in the EXAMPLES section.

               Tip
               There are various shortcut commands for \pset. See \a, \C, \f, \H, \t, \T, and \x.

       \q or \quit
           Quits the psql program. In a script file, only execution of that script is terminated.

       \qecho text [ ... ]
           This command is identical to \echo except that the output will be written to the query
           output channel, as set by \o.

       \r or \reset
           Resets (clears) the query buffer.

       \s [ filename ]
           Print psql's command line history to filename. If filename is omitted, the history is
           written to the standard output (using the pager if appropriate). This command is not
           available if psql was built without Readline support.

       \set [ name [ value [ ... ] ] ]
           Sets the psql variable name to value, or if more than one value is given, to the
           concatenation of all of them. If only one argument is given, the variable is set with
           an empty value. To unset a variable, use the \unset command.

           \set without any arguments displays the names and values of all currently-set psql
           variables.

           Valid variable names can contain letters, digits, and underscores. See the section
           Variables below for details. Variable names are case-sensitive.

           Although you are welcome to set any variable to anything you want, psql treats several
           variables as special. They are documented in the section about variables.

               Note
               This command is unrelated to the SQL command SET(7).

       \setenv name [ value ]
           Sets the environment variable name to value, or if the value is not supplied, unsets
           the environment variable. Example:

               testdb=> \setenv PAGER less
               testdb=> \setenv LESS -imx4F

       \sf[+] function_description
           This command fetches and shows the definition of the named function, in the form of a
           CREATE OR REPLACE FUNCTION command. The definition is printed to the current query
           output channel, as set by \o.

           The target function can be specified by name alone, or by name and arguments, for
           example foo(integer, text). The argument types must be given if there is more than one
           function of the same name.

           If + is appended to the command name, then the output lines are numbered, with the
           first line of the function body being line 1.

       \t
           Toggles the display of output column name headings and row count footer. This command
           is equivalent to \pset tuples_only and is provided for convenience.

       \T table_options
           Specifies attributes to be placed within the table tag in HTML output format. This
           command is equivalent to \pset tableattr table_options.

       \timing [ on | off ]
           Without parameter, toggles a display of how long each SQL statement takes, in
           milliseconds. With parameter, sets same.

       \unset name
           Unsets (deletes) the psql variable name.

       \w or \write filename
       \w or \write |command
           Outputs the current query buffer to the file filename or pipes it to the shell command
           command.

       \watch [ seconds ]
           Repeatedly execute the current query buffer (like \g) until interrupted or the query
           fails. Wait the specified number of seconds (default 2) between executions.

       \x [ on | off | auto ]
           Sets or toggles expanded table formatting mode. As such it is equivalent to \pset
           expanded.

       \z [ pattern ]
           Lists tables, views and sequences with their associated access privileges. If a
           pattern is specified, only tables, views and sequences whose names match the pattern
           are listed.

           This is an alias for \dp (“display privileges”).

       \! [ command ]
           Escapes to a separate shell or executes the shell command command. The arguments are
           not further interpreted; the shell will see them as-is. In particular, the variable
           substitution rules and backslash escapes do not apply.

       \? [ topic ]
           Shows help information. The optional topic parameter (defaulting to commands) selects
           which part of psql is explained: commands describes psql's backslash commands; options
           describes the command-line options that can be passed to psql; and variables shows
           help about psql configuration variables.

       Patterns
           The various \d commands accept a pattern parameter to specify the object name(s) to be
           displayed. In the simplest case, a pattern is just the exact name of the object. The
           characters within a pattern are normally folded to lower case, just as in SQL names;
           for example, \dt FOO will display the table named foo. As in SQL names, placing double
           quotes around a pattern stops folding to lower case. Should you need to include an
           actual double quote character in a pattern, write it as a pair of double quotes within
           a double-quote sequence; again this is in accord with the rules for SQL quoted
           identifiers. For example, \dt "FOO""BAR" will display the table named FOO"BAR (not
           foo"bar). Unlike the normal rules for SQL names, you can put double quotes around just
           part of a pattern, for instance \dt FOO"FOO"BAR will display the table named
           fooFOObar.

           Whenever the pattern parameter is omitted completely, the \d commands display all
           objects that are visible in the current schema search path — this is equivalent to
           using * as the pattern. (An object is said to be visible if its containing schema is
           in the search path and no object of the same kind and name appears earlier in the
           search path. This is equivalent to the statement that the object can be referenced by
           name without explicit schema qualification.) To see all objects in the database
           regardless of visibility, use *.*  as the pattern.

           Within a pattern, * matches any sequence of characters (including no characters) and ?
           matches any single character. (This notation is comparable to Unix shell file name
           patterns.) For example, \dt int* displays tables whose names begin with int. But
           within double quotes, * and ?  lose these special meanings and are just matched
           literally.

           A pattern that contains a dot (.) is interpreted as a schema name pattern followed by
           an object name pattern. For example, \dt foo*.*bar* displays all tables whose table
           name includes bar that are in schemas whose schema name starts with foo. When no dot
           appears, then the pattern matches only objects that are visible in the current schema
           search path. Again, a dot within double quotes loses its special meaning and is
           matched literally.

           Advanced users can use regular-expression notations such as character classes, for
           example [0-9] to match any digit. All regular expression special characters work as
           specified in Section 9.7.3, “POSIX Regular Expressions”, in the documentation, except
           for .  which is taken as a separator as mentioned above, * which is translated to the
           regular-expression notation .*, ?  which is translated to ., and $ which is matched
           literally. You can emulate these pattern characters at need by writing ?  for ., (R+|)
           for R*, or (R|) for R?.  $ is not needed as a regular-expression character since the
           pattern must match the whole name, unlike the usual interpretation of regular
           expressions (in other words, $ is automatically appended to your pattern). Write * at
           the beginning and/or end if you don't wish the pattern to be anchored. Note that
           within double quotes, all regular expression special characters lose their special
           meanings and are matched literally. Also, the regular expression special characters
           are matched literally in operator name patterns (i.e., the argument of \do).

   Advanced Features
       Variables
           psql provides variable substitution features similar to common Unix command shells.
           Variables are simply name/value pairs, where the value can be any string of any
           length. The name must consist of letters (including non-Latin letters), digits, and
           underscores.

           To set a variable, use the psql meta-command \set. For example,

               testdb=> \set foo bar

           sets the variable foo to the value bar. To retrieve the content of the variable,
           precede the name with a colon, for example:

               testdb=> \echo :foo
               bar

           This works in both regular SQL commands and meta-commands; there is more detail in SQL
           Interpolation, below.

           If you call \set without a second argument, the variable is set, with an empty string
           as value. To unset (i.e., delete) a variable, use the command \unset. To show the
           values of all variables, call \set without any argument.

               Note
               The arguments of \set are subject to the same substitution rules as with other
               commands. Thus you can construct interesting references such as \set :foo
               'something' and get “soft links” or “variable variables” of Perl or PHP fame,
               respectively. Unfortunately (or fortunately?), there is no way to do anything
               useful with these constructs. On the other hand, \set bar :foo is a perfectly
               valid way to copy a variable.

           A number of these variables are treated specially by psql. They represent certain
           option settings that can be changed at run time by altering the value of the variable,
           or in some cases represent changeable state of psql. Although you can use these
           variables for other purposes, this is not recommended, as the program behavior might
           grow really strange really quickly. By convention, all specially treated variables'
           names consist of all upper-case ASCII letters (and possibly digits and underscores).
           To ensure maximum compatibility in the future, avoid using such variable names for
           your own purposes. A list of all specially treated variables follows.

           AUTOCOMMIT
               When on (the default), each SQL command is automatically committed upon successful
               completion. To postpone commit in this mode, you must enter a BEGIN or START
               TRANSACTION SQL command. When off or unset, SQL commands are not committed until
               you explicitly issue COMMIT or END. The autocommit-off mode works by issuing an
               implicit BEGIN for you, just before any command that is not already in a
               transaction block and is not itself a BEGIN or other transaction-control command,
               nor a command that cannot be executed inside a transaction block (such as VACUUM).

                   Note
                   In autocommit-off mode, you must explicitly abandon any failed transaction by
                   entering ABORT or ROLLBACK. Also keep in mind that if you exit the session
                   without committing, your work will be lost.

                   Note
                   The autocommit-on mode is PostgreSQL's traditional behavior, but
                   autocommit-off is closer to the SQL spec. If you prefer autocommit-off, you
                   might wish to set it in the system-wide psqlrc file or your ~/.psqlrc file.

           COMP_KEYWORD_CASE
               Determines which letter case to use when completing an SQL key word. If set to
               lower or upper, the completed word will be in lower or upper case, respectively.
               If set to preserve-lower or preserve-upper (the default), the completed word will
               be in the case of the word already entered, but words being completed without
               anything entered will be in lower or upper case, respectively.

           DBNAME
               The name of the database you are currently connected to. This is set every time
               you connect to a database (including program start-up), but can be unset.

           ECHO
               If set to all, all nonempty input lines are printed to standard output as they are
               read. (This does not apply to lines read interactively.) To select this behavior
               on program start-up, use the switch -a. If set to queries, psql prints each query
               to standard output as it is sent to the server. The switch for this is -e. If set
               to errors, then only failed queries are displayed on standard error output. The
               switch for this is -b. If unset, or if set to none (or any other value than those
               above) then no queries are displayed.

           ECHO_HIDDEN
               When this variable is set to on and a backslash command queries the database, the
               query is first shown. This feature helps you to study PostgreSQL internals and
               provide similar functionality in your own programs. (To select this behavior on
               program start-up, use the switch -E.) If you set the variable to the value noexec,
               the queries are just shown but are not actually sent to the server and executed.

           ENCODING
               The current client character set encoding.

           FETCH_COUNT
               If this variable is set to an integer value > 0, the results of SELECT queries are
               fetched and displayed in groups of that many rows, rather than the default
               behavior of collecting the entire result set before display. Therefore only a
               limited amount of memory is used, regardless of the size of the result set.
               Settings of 100 to 1000 are commonly used when enabling this feature. Keep in mind
               that when using this feature, a query might fail after having already displayed
               some rows.

                   Tip
                   Although you can use any output format with this feature, the default aligned
                   format tends to look bad because each group of FETCH_COUNT rows will be
                   formatted separately, leading to varying column widths across the row groups.
                   The other output formats work better.

           HISTCONTROL
               If this variable is set to ignorespace, lines which begin with a space are not
               entered into the history list. If set to a value of ignoredups, lines matching the
               previous history line are not entered. A value of ignoreboth combines the two
               options. If unset, or if set to none (or any other value than those above), all
               lines read in interactive mode are saved on the history list.

                   Note
                   This feature was shamelessly plagiarized from Bash.

           HISTFILE
               The file name that will be used to store the history list. The default value is
               ~/.psql_history. For example, putting:

                   \set HISTFILE ~/.psql_history- :DBNAME

               in ~/.psqlrc will cause psql to maintain a separate history for each database.

                   Note
                   This feature was shamelessly plagiarized from Bash.

           HISTSIZE
               The number of commands to store in the command history. The default value is 500.

                   Note
                   This feature was shamelessly plagiarized from Bash.

           HOST
               The database server host you are currently connected to. This is set every time
               you connect to a database (including program start-up), but can be unset.

           IGNOREEOF
               If unset, sending an EOF character (usually Control+D) to an interactive session
               of psql will terminate the application. If set to a numeric value, that many EOF
               characters are ignored before the application terminates. If the variable is set
               but has no numeric value, the default is 10.

                   Note
                   This feature was shamelessly plagiarized from Bash.

           LASTOID
               The value of the last affected OID, as returned from an INSERT or \lo_import
               command. This variable is only guaranteed to be valid until after the result of
               the next SQL command has been displayed.

           ON_ERROR_ROLLBACK
               When set to on, if a statement in a transaction block generates an error, the
               error is ignored and the transaction continues. When set to interactive, such
               errors are only ignored in interactive sessions, and not when reading script
               files. When unset or set to off, a statement in a transaction block that generates
               an error aborts the entire transaction. The error rollback mode works by issuing
               an implicit SAVEPOINT for you, just before each command that is in a transaction
               block, and then rolling back to the savepoint if the command fails.

           ON_ERROR_STOP
               By default, command processing continues after an error. When this variable is set
               to on, processing will instead stop immediately. In interactive mode, psql will
               return to the command prompt; otherwise, psql will exit, returning error code 3 to
               distinguish this case from fatal error conditions, which are reported using error
               code 1. In either case, any currently running scripts (the top-level script, if
               any, and any other scripts which it may have in invoked) will be terminated
               immediately. If the top-level command string contained multiple SQL commands,
               processing will stop with the current command.

           PORT
               The database server port to which you are currently connected. This is set every
               time you connect to a database (including program start-up), but can be unset.

           PROMPT1
           PROMPT2
           PROMPT3
               These specify what the prompts psql issues should look like. See Prompting below.

           QUIET
               Setting this variable to on is equivalent to the command line option -q. It is
               probably not too useful in interactive mode.

           SINGLELINE
               Setting this variable to on is equivalent to the command line option -S.

           SINGLESTEP
               Setting this variable to on is equivalent to the command line option -s.

           USER
               The database user you are currently connected as. This is set every time you
               connect to a database (including program start-up), but can be unset.

           VERBOSITY
               This variable can be set to the values default, verbose, or terse to control the
               verbosity of error reports.

       SQL Interpolation
           A key feature of psql variables is that you can substitute (“interpolate”) them into
           regular SQL statements, as well as the arguments of meta-commands. Furthermore, psql
           provides facilities for ensuring that variable values used as SQL literals and
           identifiers are properly quoted. The syntax for interpolating a value without any
           quoting is to prepend the variable name with a colon (:). For example,

               testdb=> \set foo 'my_table'
               testdb=> SELECT * FROM :foo;

           would query the table my_table. Note that this may be unsafe: the value of the
           variable is copied literally, so it can contain unbalanced quotes, or even backslash
           commands. You must make sure that it makes sense where you put it.

           When a value is to be used as an SQL literal or identifier, it is safest to arrange
           for it to be quoted. To quote the value of a variable as an SQL literal, write a colon
           followed by the variable name in single quotes. To quote the value as an SQL
           identifier, write a colon followed by the variable name in double quotes. These
           constructs deal correctly with quotes and other special characters embedded within the
           variable value. The previous example would be more safely written this way:

               testdb=> \set foo 'my_table'
               testdb=> SELECT * FROM :"foo";

           Variable interpolation will not be performed within quoted SQL literals and
           identifiers. Therefore, a construction such as ':foo' doesn't work to produce a quoted
           literal from a variable's value (and it would be unsafe if it did work, since it
           wouldn't correctly handle quotes embedded in the value).

           One example use of this mechanism is to copy the contents of a file into a table
           column. First load the file into a variable and then interpolate the variable's value
           as a quoted string:

               testdb=> \set content `cat my_file.txt`
               testdb=> INSERT INTO my_table VALUES (:'content');

           (Note that this still won't work if my_file.txt contains NUL bytes.  psql does not
           support embedded NUL bytes in variable values.)

           Since colons can legally appear in SQL commands, an apparent attempt at interpolation
           (that is, :name, :'name', or :"name") is not replaced unless the named variable is
           currently set. In any case, you can escape a colon with a backslash to protect it from
           substitution.

           The colon syntax for variables is standard SQL for embedded query languages, such as
           ECPG. The colon syntaxes for array slices and type casts are PostgreSQL extensions,
           which can sometimes conflict with the standard usage. The colon-quote syntax for
           escaping a variable's value as an SQL literal or identifier is a psql extension.

       Prompting
           The prompts psql issues can be customized to your preference. The three variables
           PROMPT1, PROMPT2, and PROMPT3 contain strings and special escape sequences that
           describe the appearance of the prompt. Prompt 1 is the normal prompt that is issued
           when psql requests a new command. Prompt 2 is issued when more input is expected
           during command entry, for example because the command was not terminated with a
           semicolon or a quote was not closed. Prompt 3 is issued when you are running an SQL
           COPY FROM STDIN command and you need to type in a row value on the terminal.

           The value of the selected prompt variable is printed literally, except where a percent
           sign (%) is encountered. Depending on the next character, certain other text is
           substituted instead. Defined substitutions are:

           %M
               The full host name (with domain name) of the database server, or [local] if the
               connection is over a Unix domain socket, or [local:/dir/name], if the Unix domain
               socket is not at the compiled in default location.

           %m
               The host name of the database server, truncated at the first dot, or [local] if
               the connection is over a Unix domain socket.

           %>
               The port number at which the database server is listening.

           %n
               The database session user name. (The expansion of this value might change during a
               database session as the result of the command SET SESSION AUTHORIZATION.)

           %/
               The name of the current database.

           %~
               Like %/, but the output is ~ (tilde) if the database is your default database.

           %#
               If the session user is a database superuser, then a #, otherwise a >. (The
               expansion of this value might change during a database session as the result of
               the command SET SESSION AUTHORIZATION.)

           %R
               In prompt 1 normally =, but ^ if in single-line mode, or !  if the session is
               disconnected from the database (which can happen if \connect fails). In prompt 2
               %R is replaced by a character that depends on why psql expects more input: - if
               the command simply wasn't terminated yet, but * if there is an unfinished /* ...
               */ comment, a single quote if there is an unfinished quoted string, a double quote
               if there is an unfinished quoted identifier, a dollar sign if there is an
               unfinished dollar-quoted string, or ( if there is an unmatched left parenthesis.
               In prompt 3 %R doesn't produce anything.

           %x
               Transaction status: an empty string when not in a transaction block, or * when in
               a transaction block, or !  when in a failed transaction block, or ?  when the
               transaction state is indeterminate (for example, because there is no connection).

           %l
               The line number inside the current statement, starting from 1.

           %digits
               The character with the indicated octal code is substituted.

           %:name:
               The value of the psql variable name. See the section Variables for details.

           %`command`
               The output of command, similar to ordinary “back-tick” substitution.

           %[ ... %]
               Prompts can contain terminal control characters which, for example, change the
               color, background, or style of the prompt text, or change the title of the
               terminal window. In order for the line editing features of Readline to work
               properly, these non-printing control characters must be designated as invisible by
               surrounding them with %[ and %]. Multiple pairs of these can occur within the
               prompt. For example:

                   testdb=> \set PROMPT1 '%[%033[1;33;40m%]%n@%/%R%[%033[0m%]%# '

               results in a boldfaced (1;) yellow-on-black (33;40) prompt on VT100-compatible,
               color-capable terminals.
           To insert a percent sign into your prompt, write %%. The default prompts are '%/%R%# '
           for prompts 1 and 2, and '>> ' for prompt 3.

               Note
               This feature was shamelessly plagiarized from tcsh.

       Command-Line Editing
           psql supports the Readline library for convenient line editing and retrieval. The
           command history is automatically saved when psql exits and is reloaded when psql
           starts up. Tab-completion is also supported, although the completion logic makes no
           claim to be an SQL parser. The queries generated by tab-completion can also interfere
           with other SQL commands, e.g., SET TRANSACTION ISOLATION LEVEL. If for some reason you
           do not like the tab completion, you can turn it off by putting this in a file named
           .inputrc in your home directory:

               $if psql
               set disable-completion on
               $endif

           (This is not a psql but a Readline feature. Read its documentation for further
           details.)

ENVIRONMENT

       COLUMNS
           If \pset columns is zero, controls the width for the wrapped format and width for
           determining if wide output requires the pager or should be switched to the vertical
           format in expanded auto mode.

       PAGER
           If the query results do not fit on the screen, they are piped through this command.
           Typical values are more or less. The default is platform-dependent. Use of the pager
           can be disabled by setting PAGER to empty, or by using pager-related options of the
           \pset command.

       PGDATABASE
       PGHOST
       PGPORT
       PGUSER
           Default connection parameters (see Section 31.14, “Environment Variables”, in the
           documentation).

       PSQL_EDITOR
       EDITOR
       VISUAL
           Editor used by the \e and \ef commands. The variables are examined in the order
           listed; the first that is set is used.

           The built-in default editors are vi on Unix systems and notepad.exe on Windows
           systems.

       PSQL_EDITOR_LINENUMBER_ARG
           When \e or \ef is used with a line number argument, this variable specifies the
           command-line argument used to pass the starting line number to the user's editor. For
           editors such as Emacs or vi, this is a plus sign. Include a trailing space in the
           value of the variable if there needs to be space between the option name and the line
           number. Examples:

               PSQL_EDITOR_LINENUMBER_ARG='+'
               PSQL_EDITOR_LINENUMBER_ARG='--line '

           The default is + on Unix systems (corresponding to the default editor vi, and useful
           for many other common editors); but there is no default on Windows systems.

       PSQL_HISTORY
           Alternative location for the command history file. Tilde (~) expansion is performed.

       PSQLRC
           Alternative location of the user's .psqlrc file. Tilde (~) expansion is performed.

       SHELL
           Command executed by the \!  command.

       TMPDIR
           Directory for storing temporary files. The default is /tmp.

       This utility, like most other PostgreSQL utilities, also uses the environment variables
       supported by libpq (see Section 31.14, “Environment Variables”, in the documentation).

FILES

       psqlrc and ~/.psqlrc
           Unless it is passed an -X or -c option, psql attempts to read and execute commands
           from the system-wide startup file (psqlrc) and then the user's personal startup file
           (~/.psqlrc), after connecting to the database but before accepting normal commands.
           These files can be used to set up the client and/or the server to taste, typically
           with \set and SET commands.

           The system-wide startup file is named psqlrc and is sought in the installation's
           “system configuration” directory, which is most reliably identified by running
           pg_config --sysconfdir. By default this directory will be ../etc/ relative to the
           directory containing the PostgreSQL executables. The name of this directory can be set
           explicitly via the PGSYSCONFDIR environment variable.

           The user's personal startup file is named .psqlrc and is sought in the invoking user's
           home directory. On Windows, which lacks such a concept, the personal startup file is
           named %APPDATA%\postgresql\psqlrc.conf. The location of the user's startup file can be
           set explicitly via the PSQLRC environment variable.

           Both the system-wide startup file and the user's personal startup file can be made
           psql-version-specific by appending a dash and the PostgreSQL major or minor release
           number to the file name, for example ~/.psqlrc-9.2 or ~/.psqlrc-9.2.5. The most
           specific version-matching file will be read in preference to a non-version-specific
           file.

       .psql_history
           The command-line history is stored in the file ~/.psql_history, or
           %APPDATA%\postgresql\psql_history on Windows.

           The location of the history file can be set explicitly via the PSQL_HISTORY
           environment variable.

NOTES

       •   In an earlier life psql allowed the first argument of a single-letter backslash
           command to start directly after the command, without intervening whitespace. As of
           PostgreSQL 8.4 this is no longer allowed.

       •   psql works best with servers of the same or an older major version. Backslash commands
           are particularly likely to fail if the server is of a newer version than psql itself.
           However, backslash commands of the \d family should work with servers of versions back
           to 7.4, though not necessarily with servers newer than psql itself. The general
           functionality of running SQL commands and displaying query results should also work
           with servers of a newer major version, but this cannot be guaranteed in all cases.

           If you want to use psql to connect to several servers of different major versions, it
           is recommended that you use the newest version of psql. Alternatively, you can keep a
           copy of psql from each major version around and be sure to use the version that
           matches the respective server. But in practice, this additional complication should
           not be necessary.

NOTES FOR WINDOWS USERS

       psql is built as a “console application”. Since the Windows console windows use a
       different encoding than the rest of the system, you must take special care when using
       8-bit characters within psql. If psql detects a problematic console code page, it will
       warn you at startup. To change the console code page, two things are necessary:

       •   Set the code page by entering cmd.exe /c chcp 1252. (1252 is a code page that is
           appropriate for German; replace it with your value.) If you are using Cygwin, you can
           put this command in /etc/profile.

       •   Set the console font to Lucida Console, because the raster font does not work with the
           ANSI code page.

EXAMPLES

       The first example shows how to spread a command over several lines of input. Notice the
       changing prompt:

           testdb=> CREATE TABLE my_table (
           testdb(>  first integer not null default 0,
           testdb(>  second text)
           testdb-> ;
           CREATE TABLE

       Now look at the table definition again:

           testdb=> \d my_table
                        Table "my_table"
            Attribute |  Type   |      Modifier
           -----------+---------+--------------------
            first     | integer | not null default 0
            second    | text    |

       Now we change the prompt to something more interesting:

           testdb=> \set PROMPT1 '%n@%m %~%R%# '
           peter@localhost testdb=>

       Let's assume you have filled the table with data and want to take a look at it:

           peter@localhost testdb=> SELECT * FROM my_table;
            first | second
           -------+--------
                1 | one
                2 | two
                3 | three
                4 | four
           (4 rows)

       You can display tables in different ways by using the \pset command:

           peter@localhost testdb=> \pset border 2
           Border style is 2.
           peter@localhost testdb=> SELECT * FROM my_table;
           +-------+--------+
           | first | second |
           +-------+--------+
           |     1 | one    |
           |     2 | two    |
           |     3 | three  |
           |     4 | four   |
           +-------+--------+
           (4 rows)

           peter@localhost testdb=> \pset border 0
           Border style is 0.
           peter@localhost testdb=> SELECT * FROM my_table;
           first second
           ----- ------
               1 one
               2 two
               3 three
               4 four
           (4 rows)

           peter@localhost testdb=> \pset border 1
           Border style is 1.
           peter@localhost testdb=> \pset format unaligned
           Output format is unaligned.
           peter@localhost testdb=> \pset fieldsep ","
           Field separator is ",".
           peter@localhost testdb=> \pset tuples_only
           Showing only tuples.
           peter@localhost testdb=> SELECT second, first FROM my_table;
           one,1
           two,2
           three,3
           four,4

       Alternatively, use the short commands:

           peter@localhost testdb=> \a \t \x
           Output format is aligned.
           Tuples only is off.
           Expanded display is on.
           peter@localhost testdb=> SELECT * FROM my_table;
           -[ RECORD 1 ]-
           first  | 1
           second | one
           -[ RECORD 2 ]-
           first  | 2
           second | two
           -[ RECORD 3 ]-
           first  | 3
           second | three
           -[ RECORD 4 ]-
           first  | 4
           second | four