Ubuntu Manpage: pyhoca-gui - graphical X2Go client applet written in Python

NAME

       pyhoca-gui - graphical X2Go client applet written in Python

SYNOPSIS

       pyhoca-gui [ options ]

DESCRIPTION

       pyhoca-gui is a cross-platform (Windows, MacOS X, Linux) graphical X2Go client applet that
       docks to your desktop's system tray.

       From your desktop's system tray you can start/resume/share pre-configured  X2Go  sessions.
       You  can  manage  the pre-configured session profiles in the X2Go profile manager and also
       configure the basic setup of pyhoca-gui.

       pyhoca-gui uses the  same  set  of  config  files  (settings,  printing  and  sessions  in
       ~/.x2goclient) as the original X2Go Client application (by Heinz-M. Graesing and Oleksandr
       Schneyder) does.

       On Windows systems pyhoca-gui uses the same set of Windows registry keys and values as the
       original X2Go Client application.

       See the included README and TODO for further information on pyhoca-gui.

COMMON OPTIONS

       pyhoca-gui accepts the following common options:

       -h, --help
              Display a help with all available command line options and exit.

       -V, --version
              Output version information and exit.

       -d, --quiet
              No output to stdout at all! Use this option on Windows!!!

       -d, --debug
              Enable debugging output.

       --libdebug
              Enable debugging code of the unterlying Python X2Go module.

       --libdebug-sftpxfer
              Enable  debugging  code of Python X2Go's sFTP server code (very verbose, and it may
              even reveal promiscuous data).

SESSION RELATED OPTIONS

-P, --session-profile
The name of the session profile to be used to make the connection. You can actually
pass a komma-separated list of session profile names to this option.

--remember-username
For profiles with interactive authentication, remember the last-used username.

--non-interactive
Run in non-interactive mode. This option requires the --session-profile option. It
also sets the following options to true automagically:

--restricted-trayicon
--single_session_profile
--start-on-connect
--resume-all-on-connect
--exit-on-disconnect
--disconnect-on-suspend
--disconnect-on-terminate

--auto-connect
Connect sessions via SSH public key authentication on application startup, if
possible.

--show-profile-metatypes
Show descriptive meta information on session profiles in menus (NOTE: this makes
menus appear a bit more sluggish, use it mostly for debugging).

--single-session-profile
Disable support of handling multiple session profiles. Use together with the
--session-profile cmdline parameter.

--tray-icon <your-logo>
Define an alternative system tray icon file (PNG files only, leave out file
extension here, size 22x22 on Linux, 16x16 on Windows).

--tray-icon-connecting <your-logo-while-connecting>
Define an alternative system tray icon file while connecting to a server (PNG files
only, leave out file extension here, size 22x22 on Linux, 16x16 on Windows).

--restricted-trayicon
Restrict functionality of pyhoca-gui's main session manager icon that is shown in
the notification area / system tray. This switch limits the icon 's functionality
to a right-click menu that allows one to raise the ,,About'' window and exit the
application. On left-click only a minimal session menu is shown.

--add-to-known-hosts
Automatically add host key fingerprint to .ssh/known_hosts in case of "authenticity
of server can't be established" (without user interaction).

Handle this option with care: Using it lessens the security/integrity of your SSH
client setup.

--start-on-connect
DEPRECATED: Start a session directly after authentication (only if no suspended
sessions are available). This switch is now fully controlled from within the
session profiles. This option itself remains here for compatibility with older
versions of PyHoca-GUI.

--exit-on-disconnect
Exit pyhoca-gui cleanly once a session has been disconnected.

--resume-on-connect, --resume-newest-on-connect
DEPRECATED: After authentication directly auto-resume the newest available
running/suspended session. This switch is now fully controlled from within the
session profiles, resuming the newest session is the hard-coded default. However,
you can influence the resuming behaviour with the next two command line options.
This option itself remains here for compatibility with older versions of PyHoca-
GUI.

--resume-oldest-on-connect
After authentication directly auto-resume the oldest available running/suspended
session.

--resume-all-on-connect
After authentication directly auto-resume all available running/suspended session.

--disconnect-on-suspend
Disconnect from a server if a session on that server has been suspended.

--disconnect-on-terminate
Disconnect from a server if a session on that server has been terminated.

--display <hostname>:<screennumber>
Set the DISPLAY environment variable to <hostname>:<screennumber>.

BROKERAGE OPTIONS

       In  case  you  want  to retrieve X2Go session profiles from an X2Go Session Broker use the
       following options:

       --broker-url=<URL>
              Specify the <URL> of the X2Go Session Broker. pyhoca-gui  can  access  http://  and
              ssh:// style URLs.

              Syntax of <URL> for HTTP brokerage:

              http(s)://<user>:<password>@<hostname>:<port>/path/to/broker

              Syntax of <URL> for  SSH brokerage:

              ssh://<user>:<password>@<hostname>:<port>/usr/bin/x2gobroker   (or  any  executable
              that provides the broker via SSH).

              As a special <URL> you can type "HTTP" or  "SSH"  and  then  the  application  will
              provide a login window with a pre-formatted / schematic URL.

       --broker-password <password>
              Session  broker  password  for  retrieving  session  profiles from the X2Go Session
              Broker.  The cleartext password that has been specified at the command line will be
              masqueraded  in  the  systems  process  list (Linux, MacOS). On Windows systems the
              usage of the --broker-password option is forbidden.

       --broker-name <broker-name>
              Provide a human readable name for the  session  broker.  This  name  overrides  the
              default  broker  name  ("X2Go  Session  Broker")  in  the  application's  menus and
              notification bubbles.

       --broker-cacertfile CACERT_FILE
              For https:// brokers with SSL certificates that have been signed  against  a  self-
              signed  root-CA,  use  this command line option to point to the self-signed root-CA
              certificate file.

       --broker-autoconnect
              If this command line option is given the session broker authentication dialog  will
              appear on application startup.

BRANDING OPTIONS

The pyhoca-gui provides some feature that allow to easily brand its appearance. Here some
options for tweaking the pyhoca-gui appearance and behaviour.

--splash-image <your-splash-image>
Define an alternative splash image that gets shown on application startup (PNG
files only, full path or filename as found in <share>/img).

--about-image <your-about-window-image>
Define an alternative image for the application's ,,About'' window (PNG files only,
full path or filename as found in <share>/img). For those who distribute a
customized version of this application: As PyHoca-GUI and its backend Python X2Go
are licensed under AGPL, the ,,About'' window is a good place for placing the
download location of your modified version of the source code.

--disable-splash
Do not show the application's splash screen.

--disable-options
Grey-out the ,,Options'' menu item and thus disable the client configuration
window.

--disable-printingprefs
Grey-out the ,,Printing Preferences'' menu item and thus disable the client's
printing preferences window.

--disable-profilemanager
Grey-out the profile manager menu items and thus disable all profile management
functionalities.

--disable-notifications
Disable all applet notifications.

--logon-window-position <x-pos>x<y-pos>
Give a custom position for the logon window, use negative values to position
relative to right/bottom border.

--published-applications-no-submenus <number>
The number of published applications that will be rendered without submenus.

BACKEND OPTIONS

       pyhoca-gui  supports  transparent  use of different data backends. For configuration three
       backends are common: FILE, GCONF (Linux only)  and  WINREG  (Windows  only).  The  default
       backend currently is the FILE backend on all platforms.

       For client-server communication the only yet implemented backend is the STDOUT backend (as
       X2Go  server  commands  print  their  execution  results  to   /dev/stdout.   (But   other
       communication backends might be possible in the future...).

       In  the  same  way  we  are focusing on a successor of the current NX3 agent/proxy tool. A
       change in the proxy backend will also be implemented as a backend.

       --backend-controlsession <CONTROLSESSION_BACKEND>
              Force usage of a certain CONTROLSESSION_BACKEND (do not use this  unless  you  know
              exactly what you are doing).

       --backend-terminalsession <TERMINALSESSION_BACKEND>
              Force  usage  of a certain TERMINALSESSION_BACKEND (do not use this unless you know
              exactly what you are doing).

       --backend-serversessioninfo <SERVERSESSIONINFO_BACKEND>
              Force usage of a certain SERVERSESSIONINFO_BACKEND (do not use this unless you know
              exactly what you are doing).

       --backend-serversessionlist <SERVERSESSIONLIST_BACKEND>
              Force usage of a certain SERVERSESSIONLIST_BACKEND (do not use this unless you know
              exactly what you are doing).

       --backend-proxy <PROXY_BACKEND>
              Force usage of a certain PROXY_BACKEND (do not use this  unless  you  know  exactly
              what you are doing).

       --backend-sessionprofiles <SESSIONPROFILES_BACKEND>
              Use  given  backend  for  accessing  session profiles, available backends on Linux:
              FILES, GCONF; on Windows: FILES, WINREG.

       --backend-clientsettings <CLIENTSETTINGS_BACKEND>
              Use given backend  for  accessing  the  client  settings  configuration,  available
              backends on Linux: FILES, GCONF; on Windows: FILES, WINREG.

       --backend-clientprinting <CLIENTPRINTING_BACKEND>
              Use  given  backend  for  accessing  the  client  printing configuration, available
              backends on Linux: FILES, GCONF; on Windows: FILES, WINREG.

PORTABLE OPTIONS

       --client-rootdir <CLIENT_ROOTDIR>
              Define an alternative location where to find  plain  text  config  files  (default:
              <HOME>/.x2goclient).    This   option   will   set   ,,--backend-profiles   FILE'',
              ,,--backend-clientsettings FILE'' and ,,--backend-clientprinting FILE''

       --sessions-rootdir <SESSIONS_ROOTDIR>
              Define an alternative location for session runtime files (default: <HOME>/.x2go).

       --ssh-rootdir <SSH_ROOTDIR>
              Define an alternative location for user SSH files (default: <HOME>/.ssh).

WINDOWS OPTIONS

       There are some options that are only available on Windows:

       --start-xserver
              Start an  XServer (if available) before starting pyhoca-gui. The  application  will
              detect  the  best  suitable  XServer  automatically,  if  more  than one XServer is
              installed on your system (currently known: Xming, Cygwin-X).

       --preferred-xserver <XSERVER_NAME>
              Start either of the currently supported XServers: Xming,  Cygwin-X  and  VcXsrv  --
              make  sure  your  preferred  XServer  is  installed  on  your  system  (default and
              recommended is VcXsrv).

       --start-pulseaudio
              Start the PulseAudio server before starting pyhoca-gui. This option  is  needed  to
              get X2Go audio working. However, it is not enabled by default.

       --lang [en|de|nl|es]
              Select the GUI language.

AUTHOR

       This  manual  has  been  written  for  the X2Go project by Mike Gabriel <mike.gabriel@das-
       netzwerkteam.de>.