Provided by: smbclient_4.3.11+dfsg-0ubuntu0.16.04.34_amd64 bug

NAME

       smbcacls - Set or get ACLs on an NT file or directory names

SYNOPSIS

       smbcacls {//server/share} {/filename} [-D|--delete acl] [-M|--modify acl] [-a|--add acl]
        [-S|--set acl] [-C|--chown name] [-G|--chgrp name] [-I allow|remove|copy] [--numeric]
        [-t] [-U username] [-d] [-e] [-m|--max-protocol LEVEL] [--query-security-info FLAGS]
        [--set-security-info FLAGS] [--sddl] [--domain-sid SID]

DESCRIPTION

       This tool is part of the samba(7) suite.

       The smbcacls program manipulates NT Access Control Lists (ACLs) on SMB file shares. An ACL
       is comprised zero or more Access Control Entries (ACEs), which define access restrictions
       for a specific user or group.

OPTIONS

       The following options are available to the smbcacls program. The format of ACLs is
       described in the section ACL FORMAT

       -a|--add acl
           Add the entries specified to the ACL. Existing access control entries are unchanged.

       -M|--modify acl
           Modify the mask value (permissions) for the ACEs specified on the command line. An
           error will be printed for each ACE specified that was not already present in the
           object's ACL.

       -D|--delete acl
           Delete any ACEs specified on the command line. An error will be printed for each ACE
           specified that was not already present in the object's ACL.

       -S|--set acl
           This command sets the ACL on the object with only what is specified on the command
           line. Any existing ACL is erased. Note that the ACL specified must contain at least a
           revision, type, owner and group for the call to succeed.

       -C|--chown name
           The owner of a file or directory can be changed to the name given using the -C option.
           The name can be a sid in the form S-1-x-y-z or a name resolved against the server
           specified in the first argument.

           This command is a shortcut for -M OWNER:name.

       -G|--chgrp name
           The group owner of a file or directory can be changed to the name given using the -G
           option. The name can be a sid in the form S-1-x-y-z or a name resolved against the
           server specified n the first argument.

           This command is a shortcut for -M GROUP:name.

       -I|--inherit allow|remove|copy
           Set or unset the windows "Allow inheritable permissions" check box using the -I
           option. To set the check box pass allow. To unset the check box pass either remove or
           copy. Remove will remove all inherited acls. Copy will copy all the inherited acls.

       --numeric
           This option displays all ACL information in numeric format. The default is to convert
           SIDs to names and ACE types and masks to a readable string format.

       -m|--max-protocol PROTOCOL_NAME
           This allows the user to select the highest SMB protocol level that smbcacls will use
           to connect to the server. By default this is set to NT1, which is the highest
           available SMB1 protocol. To connect using SMB2 or SMB3 protocol, use the strings SMB2
           or SMB3 respectively. Note that to connect to a Windows 2012 server with encrypted
           transport selecting a max-protocol of SMB3 is required.

       -t|--test-args
           Don't actually do anything, only validate the correctness of the arguments.

       --query-security-info FLAGS
           The security-info flags for queries.

       --set-security-info FLAGS
           The security-info flags for queries.

       --sddl
           Output and input acls in sddl format.

       --domain-sid SID
           SID used for sddl processing.

       -d|--debuglevel=level
           level is an integer from 0 to 10. The default value if this parameter is not specified
           is 0.

           The higher this value, the more detail will be logged to the log files about the
           activities of the server. At level 0, only critical errors and serious warnings will
           be logged. Level 1 is a reasonable level for day-to-day running - it generates a small
           amount of information about operations carried out.

           Levels above 1 will generate considerable amounts of log data, and should only be used
           when investigating a problem. Levels above 3 are designed for use only by developers
           and generate HUGE amounts of log data, most of which is extremely cryptic.

           Note that specifying this parameter here will override the log level parameter in the
           smb.conf file.

       -V|--version
           Prints the program version number.

       -s|--configfile=<configuration file>
           The file specified contains the configuration details required by the server. The
           information in this file includes server-specific information such as what printcap
           file to use, as well as descriptions of all the services that the server is to
           provide. See smb.conf for more information. The default configuration file name is
           determined at compile time.

       -l|--log-basename=logdirectory
           Base directory name for log/debug files. The extension ".progname" will be appended
           (e.g. log.smbclient, log.smbd, etc...). The log file is never removed by the client.

       --option=<name>=<value>
           Set the smb.conf(5) option "<name>" to value "<value>" from the command line. This
           overrides compiled-in defaults and options read from the configuration file.

       -N|--no-pass
           If specified, this parameter suppresses the normal password prompt from the client to
           the user. This is useful when accessing a service that does not require a password.

           Unless a password is specified on the command line or this parameter is specified, the
           client will request a password.

           If a password is specified on the command line and this option is also defined the
           password on the command line will be silently ingnored and no password will be used.

       -k|--kerberos
           Try to authenticate with kerberos. Only useful in an Active Directory environment.

       -C|--use-ccache
           Try to use the credentials cached by winbind.

       -A|--authentication-file=filename
           This option allows you to specify a file from which to read the username and password
           used in the connection. The format of the file is

               username = <value>
               password = <value>
               domain   = <value>

           Make certain that the permissions on the file restrict access from unwanted users.

       -U|--user=username[%password]
           Sets the SMB username or username and password.

           If %password is not specified, the user will be prompted. The client will first check
           the USER environment variable, then the LOGNAME variable and if either exists, the
           string is uppercased. If these environmental variables are not found, the username
           GUEST is used.

           A third option is to use a credentials file which contains the plaintext of the
           username and password. This option is mainly provided for scripts where the admin does
           not wish to pass the credentials on the command line or via environment variables. If
           this method is used, make certain that the permissions on the file restrict access
           from unwanted users. See the -A for more details.

           Be cautious about including passwords in scripts. Also, on many systems the command
           line of a running process may be seen via the ps command. To be safe always allow
           rpcclient to prompt for a password and type it in directly.

       -S|--signing on|off|required
           Set the client signing state.

       -P|--machine-pass
           Use stored machine account password.

       -e|--encrypt
           This command line parameter requires the remote server support the UNIX extensions or
           that the SMB3 protocol has been selected. Requests that the connection be encrypted.
           Negotiates SMB encryption using either SMB3 or POSIX extensions via GSSAPI. Uses the
           given credentials for the encryption negotiation (either kerberos or NTLMv1/v2 if
           given domain/username/password triple. Fails the connection if encryption cannot be
           negotiated.

       --pw-nt-hash
           The supplied password is the NT hash.

       -n|--netbiosname <primary NetBIOS name>
           This option allows you to override the NetBIOS name that Samba uses for itself. This
           is identical to setting the netbios name parameter in the smb.conf file. However, a
           command line setting will take precedence over settings in smb.conf.

       -i|--scope <scope>
           This specifies a NetBIOS scope that nmblookup will use to communicate with when
           generating NetBIOS names. For details on the use of NetBIOS scopes, see rfc1001.txt
           and rfc1002.txt. NetBIOS scopes are very rarely used, only set this parameter if you
           are the system administrator in charge of all the NetBIOS systems you communicate
           with.

       -W|--workgroup=domain
           Set the SMB domain of the username. This overrides the default domain which is the
           domain defined in smb.conf. If the domain specified is the same as the servers NetBIOS
           name, it causes the client to log on using the servers local SAM (as opposed to the
           Domain SAM).

       -O|--socket-options socket options
           TCP socket options to set on the client socket. See the socket options parameter in
           the smb.conf manual page for the list of valid options.

       -?|--help
           Print a summary of command line options.

       --usage
           Display brief usage message.

ACL FORMAT

       The format of an ACL is one or more entries separated by either commas or newlines. An ACL
       entry is one of the following:

           REVISION:<revision number>
           OWNER:<sid or name>
           GROUP:<sid or name>
           ACL:<sid or name>:<type>/<flags>/<mask>

       The revision of the ACL specifies the internal Windows NT ACL revision for the security
       descriptor. If not specified it defaults to 1. Using values other than 1 may cause strange
       behaviour.

       The owner and group specify the owner and group sids for the object. If a SID in the
       format S-1-x-y-z is specified this is used, otherwise the name specified is resolved using
       the server on which the file or directory resides.

       ACEs are specified with an "ACL:" prefix, and define permissions granted to an SID. The
       SID again can be specified in S-1-x-y-z format or as a name in which case it is resolved
       against the server on which the file or directory resides. The type, flags and mask values
       determine the type of access granted to the SID.

       The type can be either ALLOWED or DENIED to allow/deny access to the SID. The flags values
       are generally zero for file ACEs and either 9 or 2 for directory ACEs. Some common flags
       are:

       •   #define SEC_ACE_FLAG_OBJECT_INHERIT 0x1#define SEC_ACE_FLAG_CONTAINER_INHERIT 0x2#define SEC_ACE_FLAG_NO_PROPAGATE_INHERIT 0x4#define SEC_ACE_FLAG_INHERIT_ONLY 0x8

       At present, flags can only be specified as decimal or hexadecimal values.

       The mask is a value which expresses the access right granted to the SID. It can be given
       as a decimal or hexadecimal value, or by using one of the following text strings which map
       to the NT file permissions of the same name.

       •   R - Allow read access

       •   W - Allow write access

       •   X - Execute permission on the object

       •   D - Delete the object

       •   P - Change permissions

       •   O - Take ownership

       The following combined permissions can be specified:

       •   READ - Equivalent to 'RX' permissions

       •   CHANGE - Equivalent to 'RXWD' permissions

       •   FULL - Equivalent to 'RWXDPO' permissions

EXIT STATUS

       The smbcacls program sets the exit status depending on the success or otherwise of the
       operations performed. The exit status may be one of the following values.

       If the operation succeeded, smbcacls returns and exit status of 0. If smbcacls couldn't
       connect to the specified server, or there was an error getting or setting the ACLs, an
       exit status of 1 is returned. If there was an error parsing any command line arguments, an
       exit status of 2 is returned.

VERSION

       This man page is correct for version 4 of the Samba suite.

AUTHOR

       The original Samba software and related utilities were created by Andrew Tridgell. Samba
       is now developed by the Samba Team as an Open Source project similar to the way the Linux
       kernel is developed.

       smbcacls was written by Andrew Tridgell and Tim Potter.

       The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to
       DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.