Provided by: spf-tools-perl_2.9.0-4_all 
NAME
spfquery - (Mail::SPF) - Checks if a given set of e-mail parameters matches a domain's SPF
policy
VERSION
2.501
SYNOPSIS
Preferred usage:
spfquery [--versions|-v 1|2|1,2] [--scope|-s helo|mfrom|pra] --identity|--id identity
--ip-address|--ip ip-address [--helo-identity|--helo-id helo-identity] [OPTIONS]
spfquery [--versions|-v 1|2|1,2] [--scope|-s helo|mfrom|pra] --file|-f filename|-
[OPTIONS]
Legacy usage:
spfquery --helo helo-identity --ip-address|--ip ip-address [OPTIONS]
spfquery --mfrom mfrom-identity --ip-address|--ip ip-address [--helo helo-identity]
[OPTIONS]
spfquery --pra pra-identity --ip-address|--ip ip-address [OPTIONS]
Other usage:
spfquery --version|-V
spfquery --help
DESCRIPTION
spfquery checks if a given set of e-mail parameters (e.g., the SMTP sender's IP address)
matches the responsible domain's Sender Policy Framework (SPF) policy. For more
information on SPF see <http://www.openspf.org>.
Preferred Usage
The following usage forms are preferred over the legacy forms used by older spfquery
versions:
The --identity form checks if the given ip-address is an authorized SMTP sender for the
given "helo" hostname, "mfrom" envelope sender e-mail address, or "pra" (so-called
purported resonsible address) e-mail address, depending on the value of the --scope option
(which defaults to mfrom if omitted).
The --file form reads "ip-address identity [helo-identity]" tuples from the file with the
specified filename, or from standard input if filename is -, and checks them against the
specified scope (mfrom by default).
Both forms support an optional --versions option, which specifies a comma-separated list
of the SPF version numbers of SPF records that may be used. 1 means that "v=spf1" records
should be used. 2 means that "spf2.0" records should be used. Defaults to 1,2, i.e.,
uses any SPF records that are available. Records of a higher version are preferred.
Legacy Usage
spfquery versions before 2.500 featured the following usage forms, which are discouraged
but still supported for backwards compatibility:
The --helo form checks if the given ip-address is an authorized SMTP sender for the "HELO"
hostname given as the identity (so-called "HELO" check).
The --mfrom form checks if the given ip-address is an authorized SMTP sender for the
envelope sender email-address (or domain) given as the identity (so-called "MAIL FROM"
check). If a domain is given instead of an e-mail address, "postmaster" will be
substituted for the localpart.
The --pra form checks if the given ip-address is an authorized SMTP sender for the PRA
(Purported Responsible Address) e-mail address given as the identity.
Other Usage
The --version form prints version information of spfquery. The --help form prints usage
information for spfquery.
OPTIONS
Standard Options
The preferred and legacy forms optionally take any of the following OPTIONS:
--default-explanation string
--def-exp string
Use the specified string as the default explanation if the authority domain does not
specify an explanation string of its own.
--hostname hostname
Use hostname as the host name of the local system instead of auto-detecting it.
--keep-comments
--no-keep-comments
Do (not) print any comments found when reading from a file or from standard input.
--sanitize (currently ignored)
--no-sanitize (currently ignored)
Do (not) sanitize the output by condensing consecutive white-space into a single space
and replacing non-printable characters with question marks. Enabled by default.
--debug (currently ignored)
Print out debug information.
Black Magic Options
Several options that were supported by earlier versions of spfquery are considered black
magic (i.e. potentially dangerous for the innocent user) and are thus disabled by default.
If the Mail::SPF::BlackMagic Perl module is installed, they may be enabled by specifying
--enable-black-magic.
--max-dns-interactive-terms n
Evaluate a maximum of n DNS-interactive mechanisms and modifiers per SPF check.
Defaults to 10. Do not override the default unless you know what you are doing!
--max-name-lookups-per-term n
Perform a maximum of n DNS name look-ups per mechanism or modifier. Defaults to 10.
Do not override the default unless you know what you are doing!
--authorize-mxes-for email-address|domain,...
Consider all the MXes of the comma-separated list of email-addresses and domains as
inherently authorized.
--tfwl
Perform "trusted-forwarder.org" accreditation checking.
--guess spf-terms
Use spf-terms as a default record if no SPF record is found.
--local spf-terms
Process spf-terms as local policy before resorting to a default result (the implicit
or explicit "all" mechanism at the end of the domain's SPF record). For example, this
could be used for white-listing one's secondary MXes: "mx:mydomain.example.org".
--override domain=spf-record
--fallback domain=spf-record
Set overrides and fallbacks. Each option can be specified multiple times. For
example:
--override example.org='v=spf1 -all'
--override '*.example.net'='v=spf1 a mx -all'
--fallback example.com='v=spf1 -all'
RESULT CODES
pass The specified IP address is an authorized SMTP sender for the identity.
fail The specified IP address is not an authorized SMTP sender for the identity.
softfail The specified IP address is not an authorized SMTP sender for the identity,
however the authority domain is still testing out its SPF policy.
neutral The identity's authority domain makes no assertion about the status of the IP
address.
permerror A permanent error occurred while evaluating the authority domain's policy
(e.g., a syntax error in the SPF record). Manual intervention is required
from the authority domain.
temperror A temporary error occurred while evaluating the authority domain's policy
(e.g., a DNS error). Try again later.
none There is no applicable SPF policy for the identity domain.
EXIT CODES
Result | Exit code
-----------+-----------
pass | 0
fail | 1
softfail | 2
neutral | 3
permerror | 4
temperror | 5
none | 6
EXAMPLES
spfquery --scope mfrom --id user@example.com --ip 1.2.3.4
spfquery --file test_data
echo "127.0.0.1 user@example.com helohost.example.com" | spfquery -f -
COMPATIBILITY
spfquery has undergone the following interface changes compared to earlier versions:
2.500
· A new preferred usage style for performing individual SPF checks has been
introduced. The new style accepts a unified --identity option and an optional
--scope option that specifies the type (scope) of the identity. In contrast, the
legacy usage style requires a separate usage form for every supported scope. See
"Preferred usage" and "Legacy usage" for details.
· The former "unknown" and "error" result codes have been renamed to "permerror" and
"temperror", respectively, in order to comply with RFC 4408 terminology.
· SPF checks with an empty identity are no longer supported. In the case of an
empty "MAIL FROM" SMTP transaction parameter, perform a check with the "helo"
scope directly.
· The --debug and --(no-)sanitize options are currently ignored by this version of
spfquery. They will again be supported in the future.
· Several features that were supported by earlier versions of spfquery are
considered black magic and thus are now disabled by default. See "Black Magic
Options".
· Several option names have been deprecated. This is a list of them and their
preferred synonyms:
Deprecated options | Preferred options
---------------------+-----------------------------
--sender, -s | --mfrom
--ipv4, -i | --ip-address, --ip
--name | --hostname
--max-lookup-count, | --max-dns-interactive-terms
--max-lookup |
--rcpt-to, -r | --authorize-mxes-for
--trusted | --tfwl
SEE ALSO
Mail::SPF, spfd(8)
<http://tools.ietf.org/html/rfc4408>
AUTHORS
This version of spfquery is a complete rewrite by Julian Mehnle <julian@mehnle.net>, based
on an earlier version written by Meng Weng Wong <mengwong+spf@pobox.com> and Wayne Schlitt
<wayne@schlitt.net>.