Provided by: libconfig-model-perl_2.082-1_all 
NAME
Config::Model::Value - Strongly typed configuration value
VERSION
version 2.082
SYNOPSIS
use Config::Model;
# define configuration tree object
my $model = Config::Model->new;
$model ->create_config_class (
name => "MyClass",
element => [
[qw/foo bar/] => {
type => 'leaf',
value_type => 'string',
description => 'foobar',
}
,
country => {
type => 'leaf',
value_type => 'enum',
choice => [qw/France US/],
description => 'big countries',
}
,
],
) ;
my $inst = $model->instance(root_class_name => 'MyClass' );
my $root = $inst->config_root ;
# put data
$root->load( step => 'foo=FOO country=US' );
print $root->report ;
# foo = FOO
# DESCRIPTION: foobar
#
# country = US
# DESCRIPTION: big countries
DESCRIPTION
This class provides a way to specify configuration value with the following properties:
• Strongly typed scalar: the value can either be an enumerated type, a boolean, a
number, an integer or a string
• default parameter: a value can have a default value specified during the construction.
This default value will be written in the target configuration file. ("default"
parameter)
• upstream default parameter: specifies a default value that will be used by the
application when no information is provided in the configuration file. This
upstream_default value will not written in the configuration files. Only the
"fetch_standard" method will return the builtin value. This parameter was previously
referred as "built_in" value. This may be used for audit purpose. ("upstream_default"
parameter)
• mandatory value: reading a mandatory value will raise an exception if the value is not
specified and has no default value.
• dynamic change of property: A slave value can be registered to another master value so
that the properties of the slave value can change according to the value of the master
value. For instance, paper size value can be 'letter' for country 'US' and 'A4' for
country 'France'.
• A reference to the Id of a hash of list element. In other word, the value is an
enumerated type where the possible values (choice) is defined by the existing keys of
a has element somewhere in the tree. See "Value Reference".
Default values
There are several kind of default values. They depend on where these values are defined
(or found).
From the lowest default level to the "highest":
• "upstream_default": The value is known in the application, but is not written in the
configuration file.
• "layered": The value is known by the application through another mean (e.g. an
included configuration file), but is not written in the configuration file.
• "default": The value is known by the model, but not by the application. This value
must be written in the configuration file.
• "computed": The value is computed from other configuration elements. This value must
be written in the configuration file.
• "preset": The value is not known by the model or by the application. But it can be
found by an automatic program and stored while the configuration
Config::Model::Instance is in preset mode
Then there is the value entered by the user. This will override all kind of "default"
value.
The fetch_standard function will return the "highest" level of default value, but will not
return a custom value, i.e. a value entered by the user.
Constructor
Value object should not be created directly.
Value model declaration
A leaf element must be declared with the following parameters:
value_type
Either "boolean", "enum", "integer", "number", "uniline", "string", "file", "dir".
Mandatory. See "Value types".
default
Specify the default value (optional)
upstream_default
Specify a built in default value (optional). I.e a value known by the application
which does not need to be written in the configuration file.
write_as
Array ref. Reserved for boolean value. Specify how to write a boolean value. Default
is "[0,1]" which may not be the most readable. "write_as" can be specified as
"['false','true']" or "['no','yes']".
compute
Will compute a value according to a formula and other values. By default a computed
value cannot be set. See Config::Model::ValueComputer for computed value declaration.
migrate_from
This is a special parameter to cater for smooth configuration upgrade. This parameter
can be used to copy the value of a deprecated parameter to its replacement. See
"Upgrade" for details.
convert => [uc | lc ]
When stored, the value will be converted to uppercase (uc) or lowercase (lc).
min Specify the minimum value (optional, only for integer, number)
max Specify the maximum value (optional, only for integer, number)
mandatory
Set to 1 if the configuration value must be set by the configuration user (default: 0)
choice
Array ref of the possible value of an enum. Example :
choice => [ qw/foo bar/]
match
Perl regular expression. The value will be match with the regex to assert its
validity. Example "match => '^foo'" means that the parameter value must begin with
"foo". Valid only for "string" or "uniline" values.
warn_if_match
Hash ref. Keys are made of Perl regular expression. The value can specify a warning
message (leave empty or undefined for default warning message) and instructions to fix
the value. A warning will be issued when the value match the passed regular
expression. Valid only for "string" or "uniline" values. The fix instructions will be
evaluated when apply_fixes is called. $_ will contain the value to fix. $_ will be
stored as the new value once the instructions are done. $self will contain the value
object. Use with care.
In the example below, any value matching 'foo' will be converted in uppercase:
warn_if_match => {
'foo' => {
fix => 'uc;',
msg => 'value $_ contains foo'
},
'BAR' => {
fix =>'lc;',
msg => 'value $_ contains BAR'
}
},
The tests will be done in alphabetical order. In the example above, "BAR" test will be
done before "foo" test.
$_ will be substituted with the bad value when the message is generated.
warn_unless_match
Hash ref like above. A warning will be issued when the value does not match the passed
regular expression. Valid only for "string" or "uniline" values.
warn
String. Issue a warning to user with the specified string any time a value is set or
read.
warn_if
A bit like "warn_if_match". The hash key is not a regexp but a label to help users.
The hash ref contains some Perl code that is evaluated to perform the test. A warning
will be issued if the code returns true.
$_ will contains the value to check. $self will contain the "Config::Model::Value"
object.
The example below will warn if value contaims a number:
warn_if => {
warn_test => {
code => 'defined $_ && /\d/;',
msg => 'value $_ should not have numbers',
fix => 's/\d//g;'
}
},
warn_unless
Like "warn_if", but issue a warning when the "code" returns false.
The example below will warn unless the value points to an existing directory:
warn_unless => {
'dir' => {
code => '-d',
msg => 'missing dir',
fix => "system(mkdir $_);" }
}
assert
Like "warn_if". Except that returned value will trigger an error if false:
assert => {
test_nb => {
code => 'defined $_ && /\d/;',
msg => 'should not have numbers',
fix => 's/\d//g;'
}
},
grammar
Setup a Parse::RecDescent grammar to perform validation.
If the grammar does not start with a "check" rule (i.e does not start with "check: "),
the first line of the grammar will be modified to add "check" rule and set up this
rules so the entire value must match the passed grammar.
I.e. the grammar:
token (oper token)(s?)
oper: 'and' | 'or'
token: 'Apache' | 'CC-BY' | 'Perl'
will be changed to
check: token (oper token)(s?) /^\Z/ {$return = 1;}
oper: 'and' | 'or'
token: 'Apache' | 'CC-BY' | 'Perl'
The rule is called with Value object and a string reference. So, in the actions you
may need to define, you can call the value object as $arg[0], store error message in
"${$arg[1]}}" and store warnings in "${$arg[2]}}".
replace
Hash ref. Used for enum to substitute one value with another. This parameter must be
used to enable user to upgrade a configuration with obsolete values. For instance, if
the value "foo" is obsolete and replaced by "foo_better", you will need to declare:
replace => { foo => 'foo_better' }
The hash key can also be a regular expression for wider range replacement. The regexp
must match the whole value:
replace => ( 'foo.*' => 'better_foo' }
In this case, a value will be replaced by "better_foo" if the "/^foo.*$/" regexp
matches.
replace_follow
Path specifying a hash of value element in the configuration tree. The hash if used in
a way similar to the "replace" parameter. In this case, the replacement is not coded
in the model but specified by the configuration.
refer_to
Specify a path to an id element used as a reference. See Value Reference for details.
computed_refer_to
Specify a path to an id element used as a computed reference. See "Value Reference"
for details.
warp
See section below: "Warp: dynamic value configuration".
help
You may provide detailed description on possible values with a hash ref. Example:
help => { oui => "French for 'yes'", non => "French for 'no'"}
Value types
This modules can check several value types:
"boolean"
Accepts values 1 or 0, "yes" or "no", "true" or "false". The value read back is always
1 or 0.
"enum"
Enum choices must be specified by the "choice" parameter.
"integer"
Enable positive or negative integer
"number"
The value can be a decimal number
"uniline"
A one line string. I.e without "\n" in it.
"string"
Actually, no check is performed with this type.
"reference"
Like an "enum" where the possible values (aka choice) is defined by another location
if the configuration tree. See "Value Reference".
"file"
A file name or path. A warning will be issued if the file does not exists (or is a
directory)
"dir"
A directory name or path. A warning will be issued if the directory does not exists
(or is a plain file)
Warp: dynamic value configuration
The Warp functionality enable a "Value" object to change its properties (i.e. default
value or its type) dynamically according to the value of another "Value" object locate
elsewhere in the configuration tree. (See Config::Model::Warper for an explanation on warp
mechanism).
For instance if you declare 2 "Value" element this way:
$model ->create_config_class (
name => "TV_config_class",
element => [
country => {
type => 'leaf',
value_type => 'enum',
choice => [qw/US Europe Japan/]
} ,
tv_standard => { # this example is getting old...
type => 'leaf',
value_type => 'enum',
choice => [ qw/PAL NTSC SECAM/ ]
warp => {
follow => {
# this points to the warp master
c => '- country'
},
rules => {
'$c eq "US"' => {
default => 'NTSC'
},
'$c eq "France"' => {
default => 'SECAM'
},
'$c eq "Japan"' => {
default => 'NTSC'
},
'$c eq "Europe"' => {
default => 'PAL'
},
}
}
} ,
]
);
Setting "country" element to "US" will mean that "tv_standard" has a default value set to
"NTSC" by the warp mechanism.
Likewise, the warp mechanism enables you to dynamically change the possible values of an
enum element:
state => {
type => 'leaf',
value_type => 'enum', # example is admittedly silly
warp => {
follow => {
c => '- country'
},
rules => {
'$c eq "US"' => {
choice => ['Kansas', 'Texas' ]
},
'$c eq "Europe"' => {
choice => ['France', 'Spain' ]
},
'$c eq "Japan"' => {
choice => ['Honshu', 'Hokkaido' ]
}
}
}
}
Cascaded warping
Warping value can be cascaded: "A" can be warped by "B" which can be warped by "C". But
this feature should be avoided since it can lead to a model very hard to debug. Bear in
mind that:
• Warp loop are not detected and will end up in "deep recursion subroutine" failures.
• If you declare "diamond" shaped warp dependencies, the results will depend on the
order of the warp algorithm and can be unpredictable.
• The keys declared in the warp rules ("US", "Europe" and "Japan" in the example above)
cannot be checked at start time against the warp master "Value". So a wrong warp rule
key will be silently ignored during start up and will fail at run time.
Value Reference
To set up an enumerated value where the possible choice depends on the key of a
Config::Model::AnyId object, you must:
• Set "value_type" to "reference".
• Specify the "refer_to" or "computed_refer_to" parameter. See refer_to parameter.
In this case, a "IdElementReference" object is created to handle the relation between this
value object and the referred Id. See Config::Model::IdElementReference for details.
Introspection methods
The following methods returns the current value of the parameter of the value object (as
declared in the model unless they were warped):
min
max
mandatory
choice
convert
value_type
default
upstream_default
index_value
element_name
name()
Returns the object name.
get_type
Returns "leaf".
can_store()
Returns true if the value object can be assigned to. Return 0 for a read-only value (i.e.
a computed value with no override allowed).
get_choice()
Query legal values (only for enum types). Return an array (possibly empty).
get_help ( [ on_value ] )
Returns the help strings passed to the constructor.
With "on_value" parameter, returns the help string dedicated to the passed value or undef.
Without parameter returns a hash ref that contains all the help strings.
error_msg
Returns the error messages of this object (if any)
warning_msg
Returns warning concerning this value. Returns a list in list context and a string in
scalar context.
check_value ( value )
Check the consistency of the value.
"check_value" also accepts named parameters:
value
quiet
When non null, check will not try to get extra information from the tree. This is
required in some cases to avoid loops in check, get_info, get_warp_info, re-check ...
In scalar context, return 0 or 1.
In array context, return an empty array when no error was found. In case of errors,
returns an array of error strings that should be shown to the user.
has_fixes
Returns the number of fixes that can be applied to the current value.
apply_fixes
Applies the fixes to suppress the current warnings.
check( [ value => foo ] )
Like "check_value".
Will also display warnings on STDOUT unless "silent" parameter is set to 1. In this
case,user is expected to retrieve them with "warning_msg".
Without "value" argument, this method will check the value currently stored.
Information management
store( $value )
Can be called as "value => ..., check => yes|no|skip ), silent => 0|1"
Store value in leaf element. "check" parameter can be used to skip validation check
(default ies 'yes'). "silent" cane be used to suppress warnings.
Optional "callback" is now deprecated.
clear
Clear the stored value. Further read will return the default value (or computed or
migrated value).
load_data( $value )
Load scalar data. Data is forwarded to "store( $value )".
Called with "load_data( $value )" or "load_data( data =" $value )> or with the same
parameters are "store" method.
fetch_custom
Returns the stored value if this value is different from a standard setting or built in
setting. In other words, returns undef if the stored value is identical to the default
value or the computed value or the built in value.
fetch_standard
Returns the standard value as defined by the configuration model. The standard value can
be either a preset value, a layered value, a computed value, a default value or a built-in
default value.
fetch(...)
Check and fetch value from leaf element. The method can have one parameter (the fetch
mode) or several pairs:
mode
Whether to fetch default, custom, etc value. See below for details
check
Whether to check if the value is valid or not before returning it. Default is 'yes'.
Possible value are
yes Perform check and raise an exception for bad values
skip
Perform check and return undef for bad values. A warning is issued when a bad
value is skipped. Set "check" to "no" to avoid warnings.
no Do not check and return values even if bad
silent
When set to 1, warning are not displayed on STDOUT. User is expected to read warnings
with warning_msg method.
According to the "mode" parameter, this method will return either:
empty mode parameter (default)
Value entered by user or default value if the value is different from upstream_default
or layered value. Typically this value will be written in a configuration file.
backend
Alias for default mode.
custom
The value entered by the user (if different from built in, preset, computed or default
value)
user
The value most useful to user: the value that will be used by the application.
preset
The value entered in preset mode
standard
The preset or computed or default or built in value.
default
The default value (defined by the configuration model)
layered
The value found in included files (treated in layered mode: values specified there are
handled as upstream default values). E.g. like in multistrap config.
upstream_default
The upstream_default value. (defined by the configuration model)
non_upstream_default
The custom or preset or computed or default value. Will return undef if either of this
value is identical to the upstream_default value. This feature is useful to reduce
data to write in configuration file.
allow_undef
This mode will accept to return undef for mandatory values. Normally, trying to fetch
an undefined mandatory value leads to an exception.
user_value
Returns the value entered by the user. Does not use the default or computed value. Returns
undef unless a value was actually stored.
fetch_preset
Returns the value entered in preset mode. Does not use the default or computed value.
Returns undef unless a value was actually stored in preset mode.
clear_preset
Delete the preset value. (Even out of preset mode). Returns true if other data are still
stored in the value (layered or user data). Returns false otherwise.
fetch_layered
Returns the value entered in layered mode. Does not use the default or computed value.
Returns undef unless a value was actually stored in layered mode.
clear_layered
Delete the layered value. (Even out of layered mode). Returns true if other data are still
stored in the value (layered or user data). Returns false otherwise.
get( path => ..., mode => ... , check => ... )
Get a value from a directory like path.
set( path , value )
Set a value from a directory like path.
Examples
Number with min and max values
bounded_number => {
type => 'leaf',
value_type => 'number',
min => 1,
max => 4,
},
Mandatory value
mandatory_string => {
type => 'leaf',
value_type => 'string',
mandatory => 1,
},
mandatory_boolean => {
type => 'leaf',
value_type => 'boolean',
mandatory => 1,
},
Enum with help associated with each value
Note that the help specification is optional.
enum_with_help => {
type => 'leaf',
value_type => 'enum',
choice => [qw/a b c/],
help => {
a => 'a help'
}
},
Migrate old obsolete enum value
Legacy values "a1", "c1" and "foo/.*" are replaced with "a", "c" and "foo/".
with_replace => {
type => 'leaf',
value_type => 'enum',
choice => [qw/a b c/],
replace => {
a1 => 'a',
c1 => 'c',
'foo/.*' => 'foo',
},
},
Enforce value to match a regexp
An exception will be triggered if the value does not match the "match" regular expression.
match => {
type => 'leaf',
value_type => 'string',
match => '^foo\d{2}$',
},
Enforce value to match a Parse::RecDescent grammar
match_with_parse_recdescent => {
type => 'leaf',
value_type => 'string',
grammar => q{
token (oper token)(s?)
oper: 'and' | 'or'
token: 'Apache' | 'CC-BY' | 'Perl'
},
},
Issue a warning if a value matches a regexp
Issue a warning if the string contains upper case letters. Propose a fix that translate
all capital letters to lower case.
warn_if_capital => {
type => 'leaf',
value_type => 'string',
warn_if_match => {
'/A-Z/' => {
fix => '$_ = lc;'
}
},
},
A specific warning can be specified:
warn_if_capital => {
type => 'leaf',
value_type => 'string',
warn_if_match => {
'/A-Z/' => {
fix => '$_ = lc;',
mesg => 'NO UPPER CASE PLEASE'
}
},
},
Issue a warning if a value does NOT match a regexp
warn_unless => {
type => 'leaf',
value_type => 'string',
warn_unless_match => {
foo => {
msg => '',
fix => '$_ = "foo".$_;'
}
},
},
Always issue a warning
always_warn => {
type => 'leaf',
value_type => 'string',
warn => 'Always warn whenever used',
},
Computed values
See "Examples" in Config::Model::ValueComputer.
Upgrade
Upgrade is a special case when the configuration of an application has changed. Some
parameters can be removed and replaced by another one. To avoid trouble on the application
user side, Config::Model offers a possibility to handle the migration of configuration
data through a special declaration in the configuration model.
This declaration must:
• Declare the deprecated parameter with a "status" set to "deprecated"
• Declare the new parameter with the instructions to load the semantic content from the
deprecated parameter. These instructions are declared in the "migrate_from" parameters
(which is similar to the "compute" parameter)
Here an example where a URL parameter is changed to a set of 2 parameters (host and path):
'old_url' => {
type => 'leaf',
value_type => 'uniline',
status => 'deprecated',
},
'host' => {
type => 'leaf',
value_type => 'uniline',
# the formula must end with '$1' so the result of the capture is used
# as the host value
migrate_from => {
formula => '$old =~ m!http://([\w\.]+)!; $1 ;',
variables => {
old => '- old_url'
},
use_eval => 1,
},
},
'path' => {
type => 'leaf',
value_type => 'uniline',
migrate_from => {
formula => '$old =~ m!http://[\w\.]+(/.*)!; $1 ;',
variables => {
old => '- old_url'
},
use_eval => 1,
},
},
EXCEPTION HANDLING
When an error is encountered, this module may throw the following exceptions:
Config::Model::Exception::Model Config::Model::Exception::Formula
Config::Model::Exception::WrongValue Config::Model::Exception::WarpError
See Config::Model::Exception for more details.
AUTHOR
Dominique Dumont, (ddumont at cpan dot org)
SEE ALSO
Config::Model, Config::Model::Node, Config::Model::AnyId, Config::Model::Warper,
Config::Model::Exception Config::Model::ValueComputer,
AUTHOR
Dominique Dumont
COPYRIGHT AND LICENSE
This software is Copyright (c) 2005-2016 by Dominique Dumont.
This is free software, licensed under:
The GNU Lesser General Public License, Version 2.1, February 1999