NAME

       Config::Model::models::LCDd::glcd - Configuration class LCDd::glcd

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements

   Brightness
       Set brightness of the backlight if the backlight is switched 'on'.Optional. Type integer.
       upstream_default: '800'.

   CellSize
       Width and height of a character cell in pixels. This value is only used if the driver has
       been compiled with FreeType and it is enabled. Otherwise the default 6x8 cell is
       used.Optional. Type uniline. upstream_default: '12x16'.

   ConnectionType
       Select what type of connection. See documentation for types.Optional. Type uniline.
       default: 't6963'.

   Contrast
       Set the initial contrast if supported by connection type.Optional. Type integer.
       upstream_default: '600'.

   KeyMap_A
       Assign key strings to keys. There may be up to 16 keys numbered 'A' to 'Z'.  By default
       keys 'A' to 'F' are assigned Up, Down, Left, Right, Enter, Escape.Optional. Type uniline.
       default: 'Up'.

   KeyMap_B
       Optional. Type uniline. default: 'Down'.

   KeyMap_C
       Optional. Type uniline. default: 'Enter'.

   KeyMap_D
       Optional. Type uniline. default: 'Escape'.

   KeyRepeatDelay
       Time (ms) from first key report to first repeat. Set to 0 to disable repeated key reports.
       Optional. Type integer. upstream_default: '500'.

   KeyRepeatInterval
       Time (ms) between repeated key reports. Ignored if KeyRepeatDelay is disabled (set to
       zero). Optional. Type integer. upstream_default: '300'.

   OffBrightness
       Set brightness of the backlight if the backlight is switched 'off'. Set this to zero to
       completely turn off the backlight. Optional. Type integer. upstream_default: '100'.

   Port
       --- t6963 options --- Parallel port to use legal: 0x200-0x400 Optional. Type uniline.
       upstream_default: '0x378'.

   Size
       Width and height of the display in pixel. The supported sizes may depend on the
       ConnectionType.  legal: 1x1-640x480 Optional. Type uniline. upstream_default: '128x64'.

   bidirectional
       Use LPT port in bi-directional mode. This should work on most LPT port and is required for
       proper timing! Optional. Type boolean. upstream_default: 'yes'.

   delayBus
       Insert additional delays into reads / writes. Optional. Type boolean. upstream_default:
       'no'.

   fontHasIcons
       Some fonts miss the Unicode characters used to represent icons. In this case the built-in
       5x8 font can used if this option is turned off. Optional. Type boolean. upstream_default:
       'yes'.

   normal_font
       Path to font file to use for FreeType rendering. This font must be monospace and should
       contain some special Unicode characters like arrows (Andale Mono is recommended and can be
       fetched at http://corefonts.sf.net).Optional. Type uniline. upstream_default:
       '/usr/local/lib/X11/fonts/TTF/andalemo.ttf'.

   picolcdgfx_Inverted
       Inverted: Inverts the pixels. Optional. Type enum. choice: 'yesorno'. upstream_default:
       'no'.

   picolcdgfx_KeyTimeout
       --- picolcdgfx options --- Time in ms for usb_read to wait on a key press. Optional. Type
       integer. upstream_default: '125'.

   serdisp_device
       The display device to use, e.g. serraw:/dev/ttyS0, parport:/dev/parport0 or
       USB:07c0/1501.Optional. Type uniline. default: '/dev/ppi0'.

   serdisp_name
       --- serdisplib options --- Name of the underlying serdisplib driver, e.g. ctinclud. See
       serdisplib documentation for details.Optional. Type uniline. default: 't6963'.

   serdisp_options
       Options string to pass to serdisplib during initialization. Use this to set any display
       related options (e.g. wiring). The display size is always set based on the Size configured
       above! By default, no options are set.  Important: The value must be quoted as it contains
       equal signs!Optional. Type uniline. upstream_default: 'INVERT=1'.

   useFT2
       If LCDproc has been compiled with FreeType 2 support this option can be used to turn if
       off intentionally. Optional. Type boolean. upstream_default: 'yes'.

   x11_BacklightColor
       BacklightColor: The color of the backlight as full brightness.Optional. Type uniline.
       upstream_default: '0x80FF80'.

   x11_Border
       Border: Adds a border (empty space) around the LCD portion of X11 window.Optional. Type
       uniline. upstream_default: '20'.

   x11_Inverted
       Inverted: inverts the pixels Optional. Type boolean. upstream_default: 'no'.

   x11_PixelColor
       Colors are in RRGGBB format prefixed with "0x".  PixelColor: The color of each dot at full
       contrast. Optional. Type uniline. upstream_default: '0x000000'.

   x11_PixelSize
       --- x11 options --- PixelSize is size of each dot in pixels + a pixel gap. Optional. Type
       uniline. upstream_default: '3+1'.

SEE ALSO

       •   cme