Provided by: libmarpa-r2-perl_2.086000~dfsg-5build1_amd64 
NAME
Marpa::R2::NAIF - Marpa named argument interface (NAIF)
Synopsis
use Marpa::R2;
my $grammar = Marpa::R2::Grammar->new(
{ start => 'Expression',
actions => 'My_Actions',
default_action => 'first_arg',
rules => [
{ lhs => 'Expression', rhs => [qw/Term/] },
{ lhs => 'Term', rhs => [qw/Factor/] },
{ lhs => 'Factor', rhs => [qw/Number/] },
{ lhs => 'Term', rhs => [qw/Term Add Term/], action => 'do_add' },
{ lhs => 'Factor',
rhs => [qw/Factor Multiply Factor/],
action => 'do_multiply'
},
],
}
);
$grammar->precompute();
my $recce = Marpa::R2::Recognizer->new( { grammar => $grammar } );
$recce->read( 'Number', 42 );
$recce->read('Multiply');
$recce->read( 'Number', 1 );
$recce->read('Add');
$recce->read( 'Number', 7 );
sub My_Actions::do_add {
my ( undef, $t1, undef, $t2 ) = @_;
return $t1 + $t2;
}
sub My_Actions::do_multiply {
my ( undef, $t1, undef, $t2 ) = @_;
return $t1 * $t2;
}
sub My_Actions::first_arg { shift; return shift; }
my $value_ref = $recce->value;
my $value = $value_ref ? ${$value_ref} : 'No Parse';
About this document
This document contains a top-level overview of, and tutorial for, the named argument
inteface (NAIF) for the Marpa parse engine. If you are a new to Marpa, you want to start
with the tutorial for the the Scanless interface (SLIF) instead.
The NAIF is a middle level interface. It is more low level than the Scanless interface
(SLIF), which uses a domain-specific language. But it is higher level, and provides more
features, than the thin interface, which provides direct access to the underlying Libmarpa
C library.
The two examples in this document show the typical flows of NAIF Marpa method calls. This
document will use these examples to describe the basic features of Marpa in semi-tutorial
fashion. More advanced features, and full reference details of all features, can be found
in the other Marpa API documents.
The three phases
A parser needs to:
• Accept a grammar.
• Read input.
• Return values from the parses, according to a semantics.
In Marpa these three tasks are, for the most part, distinct phases. Grammars are
"Marpa::R2::Grammar" objects. The reading of input and the evaluation of the parse
according to the semantics is performed by "Marpa::R2::Recognizer" objects.
Example 1: a simple calculator
The synopsis shows the code for a very simple calculator. It handles only addition and
multiplication of integers. This section explains, line by line, how it works.
Marpa::R2::Grammar::new
my $grammar = Marpa::R2::Grammar->new(
{ start => 'Expression',
actions => 'My_Actions',
default_action => 'first_arg',
rules => [
{ lhs => 'Expression', rhs => [qw/Term/] },
{ lhs => 'Term', rhs => [qw/Factor/] },
{ lhs => 'Factor', rhs => [qw/Number/] },
{ lhs => 'Term', rhs => [qw/Term Add Term/], action => 'do_add' },
{ lhs => 'Factor',
rhs => [qw/Factor Multiply Factor/],
action => 'do_multiply'
},
],
}
);
Marpa grammars are "Marpa::R2::Grammar" objects. They are created with the
Marpa::R2::Grammar::new constructor. The arguments to Marpa::R2::Grammar::new are
references to hashes of named arguments. In the key/value pairs of these hashes, the hash
key is the name of the argument, and the hash value is the value of the named argument.
The start named argument
start => 'Expression',
The "start" named argument is required. Its value is a string containing the name of the
grammar's start symbol.
Named arguments for the semantics
actions => 'My_Actions',
default_action => 'first_arg',
The "actions" and "default_action" named arguments specify semantics. Their argument
values are strings, which acquire their semantics during evaluation.
Evaluation will be described later. Peeking ahead, "actions" provides the name of a Perl
package where Marpa will look for its actions. The "default_action" named argument will
be interpreted as an action name in that package. This action name will resolve to an
action -- a Perl closure that implements semantics. The action specified by
"default_action" is used as the action for rules with no action of their own.
The rules named argument
rules => [
{ lhs => 'Expression', rhs => [qw/Term/] },
{ lhs => 'Term', rhs => [qw/Factor/] },
{ lhs => 'Factor', rhs => [qw/Number/] },
{ lhs => 'Term', rhs => [qw/Term Add Term/], action => 'do_add' },
{ lhs => 'Factor',
rhs => [qw/Factor Multiply Factor/],
action => 'do_multiply'
},
],
The value of the "rules" named argument is a reference to an array of rule descriptors.
In this example, all the rule descriptors are in the "long" form -- they are references to
hashes of rule properties. In each key/value pair of a rule descriptor hash, the key is
the name of a rule property, and the hash value is the value of that rule property.
The lhs property
The value of the "lhs" rule property must be a string containing the name of the rule's
left hand side symbol. Every Marpa rule must have a left hand side symbol.
The rhs property
The value of the "rhs" property is a reference to an array of strings containing names of
the rule's right hand symbols, in order. This array may be zero length, in which case
this is an empty rule -- a rule with no symbols on the right hand side. There are no
empty rules in this example.
The action property
The value of the "action" rule property is a string. Peeking ahead, each "action"
property string will be interpreted as an action name. This action name will be resolved
to a Perl closure that implements the rule's semantics.
Marpa::R2::Grammar::precompute
$grammar->precompute();
Before a Marpa grammar object can be used by a Marpa recognizer, it must be precomputed.
Precomputation compiles data structures that the recognizer will need.
Marpa::R2::Recognizer::new
my $recce = Marpa::R2::Recognizer->new( { grammar => $grammar } );
"Marpa::R2::NAIF::Recognizer::new" creates a new recognizer. Its arguments are references
to hashes of named arguments. In this example the only named argument is the required
argument: ""grammar"". The value of the "grammar" named argument must be a precomputed
Marpa grammar.
Marpa::R2::Recognizer::read
$recce->read( 'Number', 42 );
$recce->read('Multiply');
$recce->read( 'Number', 1 );
$recce->read('Add');
$recce->read( 'Number', 7 );
The "Marpa::R2::NAIF::Recognizer::read" method takes two arguments, a token name and a
token value. The token name must be the name of a valid terminal symbol in the grammar.
By default symbols are valid as terminal symbols, if and only if they do NOT occur on the
LHS of any rule.
The token value must be a Perl scalar, but otherwise its form and semantics are entirely
up to the application. If the token value is never used, it can be omitted. In the
calculator example, the values of the ""Add"" and ""Multiply"" tokens are never used, and
are allowed to default to an undefined value.
Marpa::R2::Recognizer::value
my $value_ref = $recce->value;
my $value = $value_ref ? ${$value_ref} : 'No Parse';
The "Marpa::R2::NAIF::Recognizer::value" method returns a reference to the parse result's
value, if there was a parse result. If there was no parse result,
"Marpa::R2::NAIF::Recognizer::value" returns "undef".
Resolving the semantics
The first thing "Marpa::R2::NAIF::Recognizer::value" needs to do is to resolve the
semantics. Resolving the semantics means mapping the action names into actions. Actions
are Perl closures which directly implement semantics. In this example, the "actions"
named argument is specified. "actions" is a Perl package name. Marpa will look for
actions in that package.
actions => 'My_Actions',
{ lhs => 'Factor', rhs => [qw/Factor Multiply Factor/], action => 'do_multiply' },
For example, the "action" property for the above rule is ""do_multiply"" and the "actions"
named argument to the grammar was ""My_Actions"". So Marpa looks for a closure whose
fully qualified name is "My_Actions::do_multiply", which it finds:
sub My_Actions::do_multiply {
my ( undef, $t1, undef, $t2 ) = @_;
return $t1 * $t2;
}
Rules do not always have "action" properties. That is the case with these rules in this
example:
{ lhs => 'Expression', rhs => [qw/Term/] },
{ lhs => 'Term', rhs => [qw/Factor/] },
{ lhs => 'Factor', rhs => [qw/Number/] },
The rules in the above display have no action names. When a rule has no action name,
Marpa will fall back to trying to use the default action, as described next.
default_action => 'first_arg',
The "default_action" named argument is resolved in the same way as are the "action"
properties of the rules. In this example, default_action is specified as ""first_arg""
and resolves to "My_Actions::first_arg".
Actions
sub My_Actions::first_arg { shift; return shift; }
sub My_Actions::do_add {
my ( undef, $t1, undef, $t2 ) = @_;
return $t1 + $t2;
}
Value actions are Perl closures used as callbacks. Value actions are called when nodes in
a parse tree are evaluated. A value action receives one or more arguments. The first
argument to a value action is always a per-parse-tree object, which the callbacks can use
as a scratchpad. In these examples, the per-parse-tree object is not used.
For a non-empty rule, the second and any subsequent arguments to the callback are the
values, in lexical order, of the symbols on the right hand side of the rule. If the
action is for an empty rule, the per-parse-tree object will be its only argument.
Every value action is expected to return a value. With one exception, this value is
passed up to a parent node as an argument. The exception is the value for the start rule.
The return value for the start rule becomes the parse result.
Rules with no action specified for them take their semantics from the "default_action"
named argument. If there is no default action for a grammar, rules with no action
specified for them return a Perl "undef".
Example 2: an ambiguous parse
This is the same calculator as before, rewritten to be ambiguous. Rather than give
multiplication precedence over addition, the rewritten calculator allows any order of
operations. In this example, the actions ("My_Actions::do_add", etc.) and the @tokens
array remain the same as before.
Eliminating precedence makes the grammar shorter, but it also means there can be multiple
parse trees, and that the different parse trees can have different parse results. In this
application we decide, for each input, to return every one of the parse results.
use Marpa::R2;
my $ambiguous_grammar = Marpa::R2::Grammar->new(
{ start => 'E',
actions => 'My_Actions',
rules => [
[ 'E', [qw/E Add E/], 'do_add' ],
[ 'E', [qw/E Multiply E/], 'do_multiply' ],
[ 'E', [qw/Number/], ],
],
default_action => 'first_arg',
}
);
$ambiguous_grammar->precompute();
my $ambiguous_recce =
Marpa::R2::Recognizer->new( { grammar => $ambiguous_grammar } );
$ambiguous_recce->read( 'Number', 42 );
$ambiguous_recce->read('Multiply');
$ambiguous_recce->read( 'Number', 1 );
$ambiguous_recce->read('Add');
$ambiguous_recce->read( 'Number', 7 );
my @values = ();
while ( defined( my $ambiguous_value_ref = $ambiguous_recce->value() ) ) {
push @values, ${$ambiguous_value_ref};
}
Short form rule descriptors
rules => [
[ 'E', [qw/E Add E/], 'do_add' ],
[ 'E', [qw/E Multiply E/], 'do_multiply' ],
[ 'E', [qw/Number/], ],
],
The rule descriptors in the ambiguous example demonstrate the "short" or array form of
rule descriptors. Array form rule descriptors are references to arrays. Here the
elements are, in order, the "lhs" property, the "rhs" property, and the "action" property.
Marpa::R2::Recognizer::value
my @values = ();
while ( defined( my $ambiguous_value_ref = $ambiguous_recce->value() ) ) {
push @values, ${$ambiguous_value_ref};
}
When called more than once, the "Marpa::R2::NAIF::Recognizer::value" method iterates
through the parse results. For each call, it returns a reference to the parse result. At
the end of the iteration, after all parse results have been returned,
"Marpa::R2::NAIF::Recognizer::value" returns "undef". If there were no parse results,
"Marpa::R2::NAIF::Recognizer::value" returns "undef" the first time that it is called.
Errors and exceptions
As a general rule, methods in the Marpa NAIF API do not return errors. When there are
errors, Marpa NAIF API methods throw an exception.
Inheritance
Classes in the Marpa API are not designed to be inherited.
The Marpa:: namespace
The "Marpa::" top-level namespace is reserved. For extensions to Marpa, one appropriate
place is the "MarpaX::" namespace. This practice helps avoid namespace collisions, and
follows a CPAN standard, as exemplified by the "DBIx::" "LWPx::" and "MooseX::" which are
for extensions of, respectively, DBI, LWP and Moose.
Other documents
This document gives a semi-tutorial overview of the entire Marpa NAIF API. For full
details on Marpa's grammar objects and their methods, see the Marpa::R2::NAIF::Grammar
document. For full details on Marpa's recognizer objects and their methods, see the
Marpa::R2::NAIF::Recognizer document.
Marpa::R2::Vocabulary is intended as a quick refresher in parsing terminology, emphasizing
how the standard terms are used in the Marpa context. the NAIF's standard semantics are
fully described in the Marpa::R2::NAIF::Semantics document. Techniques for tracing and
for debugging your Marpa grammars are described in the Marpa::R2::NAIF::Tracing document
and the Marpa::R2::NAIF::Progress document. For those with a theoretical bent, my
sources, and other useful references, are described in Marpa::R2::Advanced::Bibliography.
Support
Marpa::R2 comes without warranty. Support is provided on a volunteer basis through the
standard mechanisms for CPAN modules. The Support document has details.
Copyright and License
Copyright 2014 Jeffrey Kegler
This file is part of Marpa::R2. Marpa::R2 is free software: you can
redistribute it and/or modify it under the terms of the GNU Lesser
General Public License as published by the Free Software Foundation,
either version 3 of the License, or (at your option) any later version.
Marpa::R2 is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser
General Public License along with Marpa::R2. If not, see
http://www.gnu.org/licenses/.