Provided by: libnet-imap-simple-perl_1.2206-1_all 
NAME
Net::IMAP::Simple - Perl extension for simple IMAP account handling.
SYNOPSIS
use strict;
use warnings;
use Net::IMAP::Simple;
use Email::Simple;
# Create the object
my $imap = Net::IMAP::Simple->new('imap.example.com') ||
die "Unable to connect to IMAP: $Net::IMAP::Simple::errstr\n";
# Log on
if(!$imap->login('user','pass')){
print STDERR "Login failed: " . $imap->errstr . "\n";
exit(64);
}
# Print the subject's of all the messages in the INBOX
my $nm = $imap->select('INBOX');
for(my $i = 1; $i <= $nm; $i++){
if($imap->seen($i)){
print "*";
} else {
print " ";
}
my $es = Email::Simple->new(join '', @{ $imap->top($i) } );
printf("[%03d] %s\n", $i, $es->header('Subject'));
}
$imap->quit;
DESCRIPTION
This module is a simple way to access IMAP accounts.
OBJECT CREATION METHOD
my $imap = Net::IMAP::Simple->new( $server [ :port ]);
# OR
my $imap = Net::IMAP::Simple->new( $server [, option_name => option_value ] );
new
This class method constructs a new Net::IMAP::Simple object. It takes one required
parameter which is the server to connect to, and additional optional parameters.
The server parameter may specify just the server, or both the server and port number. To
specify an alternate port, separate it from the server with a colon (":"),
"example.com:5143".
On success an object is returned. On failure, nothing is returned and an error message is
set to $Net::IMAP::Simple.
See "PREAUTH" below for a special hostname invocation that doesn't use Sockets
(internally).
Options are provided as a hash to "new()":
port => int
Assign the port number (default: 143)
timeout => int (default: 90)
Connection timeout in seconds.
retry => int (default: 1)
Attempt to retry the connection attmpt (x) times before giving up
retry_delay => int (default: 5)
Wait (x) seconds before retrying a connection attempt
use_v6 => BOOL
If set to true, attempt to use IPv6 sockets rather than IPv4 sockets.
This option requires the IO::Socket::INET6 module
use_ssl => BOOL
If set to true, attempt to use IO::Socket::SSL sockets rather than vanilla sockets.
Note that no attempt is made to check the certificate validity by default. This is
terrible personal security but matches the previous behavior of this module. Please
consider using "find_ssl_defaults" below.
This option requires the IO::Socket::SSL module
ssl_version => version
This should be one or more of the following (space separated): SSLv3 SSLv2 TLSv1. If
you specify, for example, "SSLv3 SSLv2" then IO::Socket::SSL will attempt auto
negotiation. At the time of this writing, the default string was v3/v2 auto
negotiation -- it may have changed by the time you read this.
Warning: setting this will also set "use_ssl".
find_ssl_defaults => []
Looks in some standard places for CA certificate libraries and if found sets
reasonable defaults along the lines of the following.
ssl_options => [ SSL_ca_path => "/etc/ssl/certs/",
SSL_verify_mode => IO::Socket::SSL::SSL_VERIFY_PEER() ]
Warning: setting this will also set "use_ssl".
ssl_options => []
You may provide your own IO::Socket::SSL options if you desire to do so. It is
completely overridden by "find_ssl_defaults" above.
bindaddr => str
Assign a local address to bind
use_select_cache => BOOL
Enable "select()" caching internally
select_cache_ttl => int
The number of seconds to allow a select cache result live before running
"$imap-"select()> again.
debug => BOOL | \*HANDLE | warn | file:name
Enable debugging output. If "\*HANDLE" is a valid file handle, debugging will be
written to it. If it is the string "warn" then the debugging will be written using
the warn command. If it is a string of the form "file:name" then the named file will
be opened for append and the debugs written to it. Otherwise debugging will be
written to "STDOUT"
readline_callback => CODE
You may choose to pass a callback function for the purpose of pre-processing lines
before they are handed to the rest of the Net::IMAP::Simple internals. This can be
handy for animating a spinner or modifying the IMAP behavior.
PREAUTH
Rather than passing a port number and issuing a login, in some situations it may be
convenient to authenticate with (for example) ssh and simply invoke (for example) dovecot
by hand.
If the server name starts with "cmd:", then Net::IMAP::Simple will issue the command
rather than building sockets. This is a typical setup:
my $cmd = "ssh -C mailhost dovecot --exec-mail imap";
my $imap = Net::IMAP::Simple->new("cmd:$cmd");
# $imap->login(); ... don't need this
my $number_of_messages = $imap->select("INBOX");
METHODS
starttls
$imap->starttls;
If you start an IMAP session and wish to upgrade to SSL later, you can use this
function to start TLS. This function will try to "require" IO::Socket::SSL and
Net::SSLeay at runtime.
login
my $inbox_msgs = $imap->login($user, $passwd);
This method takes two required parameters, a username and password. This pair is
authenticated against the server. If authentication is successful TRUE \fIs0(1) will
be returned
Nothing is returned on failure and the "errstr()" error handler is set with the error
message.
status
my $num_messages = $imap->status($folder);
my ($unseen, $recent, $num_messages) = $imap->status($folder);
Issue a "STATUS" command. The "STATUS" command counts messages without altering the
state of the named (optionally) mailbox. It returns either the number of messages, or
the number of unseen messages, recent, and the total number of messages.
$folder is an optional argument. "status()" will use the current mailbox or "INBOX"
if the $folder argument is not provided.
This method does not use caching.
This method can also query custom status values. The first argument to the function
(if any) is assumed to be the folder name, so the folder argument is required when
trying to query custom status values.
my ($f1, $f2) = $imap->status($folder, qw(f1 f2));
my $f2 = $imap->status($folder, qw(f1 f2));
uidnext
my $uidnext = $imap->uidnext($folder);
Return the "UIDNEXT" value for a mailbox. The $folder argument is optional. This is
really just an alias for
my $uidnext = $imap->status($folder, qw(uidnext));
with the mild difference that it can compute the folder argument for you
uidvalidity
my $uidvalidity = $imap->uidnext($folder);
Return the "UIDVALIDITY" value for a mailbox. The $folder argument is optional. This
is also an alias for the status call like "uidnext()" above.
uid
my $uid = $imap->uid($msgno);
my @uid = $imap->uid($msg_range); # eg 4:14 or 15,4,14
Return the "UID" value(s) for a message. These unique IDs "must" stay the same during
the session and "should" stay the same between sessions. Whether they stay the same
depends on the "UIDVALIDITY" value; see: above and RFC3501.
Warning, although you might thing @uid should contain the "UID"s for 15, then 4, then
14 in the example above; most IMAP servers seem to return the UIDs in increasing
order. Normally the sequence numbers are in increasing order also, so it all maches
up.
my ($uid4, $uid14, $uid15) = $imap->uid("15,4,14"); # warning
This function is actually an alias for "$imap->uidsearch($msg_range)".
seq
my $seq = $imap->seq($uids);
my @seq = $imap->seq($uids); # eg 58888:58900
Rather like "uid()" above, but maps uids to sequence numbers.
select
my $num_messages = $imap->select($folder);
Selects a folder named in the single required parameter. The number of messages in
that folder is returned on success. On failure, nothing is returned and the
"errstr()" error handler is set with the error message.
examine
This is very nearly a synonym for "select()". The only real difference is that the
EXAMINE command is sent to the server instead of SELECT. Net::IMAP::Simple is
otherwise unaware of the read-only-ness of the mailbox.
close
$imap->close;
Un-selects the current mailbox, leaving no mailbox selected.
messages
print "Messages in Junk Mail -- " . $imap->messages("INBOX.Junk Mail") . "\n";
This method is an alias for "$imap-"select>
flags
print "Available server flags: " . join(", ", $imap->flags) . "\n";
This method accepts an optional folder name and returns the current available server
flags as a list, for the selected folder. If no folder name is provided the last
folder "$imap->select"'ed will be used.
This method uses caching.
separator
Returns the folder separator (technically "hierarchy separator", rfc3501X6.3.8) for
the server.
recent
print "Recent messages value: " . $imap->recent . "\n";
This method accepts an optional folder name and returns the 'RECENT' value provided
durning a SELECT result set. If no folder name is provided the last folder
"$imap->select"'ed will be used.
This method uses caching.
See also: search
unseen
print "Unseen messages value: " . $imap->unseen . "\n";
This method accepts an optional folder name and returns the 'UNSEEN' value provided
during a SELECT command result. If no folder name is provided the last folder
"$imap->select"'ed will be used. If a folder name is provided, this will issue a
SELECT first.
This method uses caching.
If the server does not provide UNSEEN during SELECT -- surprisingly common -- this
method will fall back and use STATUS to determine the unseen count.
NOTE: This is not the opposite of seen below. The UNSEEN value varies from server to
server, but according to the IMAP specification, it should be the number of the first
unseen message, in the case the flag is provided. (If the flag is not provided, users
would have to use the SEARCH command to find it.)
See also: search
current_box
print "Current Mail Box folder: " . $imap->current_box . "\n";
This method returns the current working mail box folder name.
top
my $header = $imap->top( $message_number ); print for @{$header};
This method accepts a message number as its required parameter. That message will be
retrieved from the currently selected folder. On success this method returns a list
reference containing the lines of the header. Nothing is returned on failure and the
"errstr()" error handler is set with the error message.
seen
defined( my $seen = $imap->seen( $message_number ) )
or warn "problem testing for \Seen: "
. $imap->errstr;
print "msg #$message_number has been \Seen!" if $seen;
A message number is the only required parameter for this method. The message's
"\Seen" flag will be examined and if the message has been seen a true value is
returned. A defined false value is returned if the message does not have the "\Seen"
flag set. The undefined value is returned when an error has occurred while checking
the flag status.
NOTE: This is not the opposite of unseen above. This issues a "FETCH" command and
checks to see if the given message has been "\Seen" before.
deleted
defined( my $deleted = $imap->deleted( $message_number ) )
or warn "problem testing for \Deleted: "
. $imap->errstr;
print "msg #$message_number has been \Deleted!" if $deleted;
A message number is the only required parameter for this method. The message's
"\Deleted" flag will be examined and if the message has been deleted a true value is
returned. A defined false value is returned if the message does not have the
"\Deleted" flag set. The undefined value is returned when an error has occurred while
checking the flag status.
list
my $message_size = $imap->list($message_number);
my $mailbox_sizes = $imap->list;
This method returns size information for a message, as indicated in the single
optional parameter, or all messages in a mailbox. When querying a single message a
scalar value is returned. When listing the entire mailbox a hash is returned. On
failure, nothing is returned and the "errstr()" error handler is set with the error
message.
get
my $message = $imap->get( $message_number ) or die $imap->errstr;
my @message_lines = $map->get( $message_number ) or die $imap->errstr;
my $part = $imap->get( $message_number, '1.1' ) or die $imap->errstr;
my @part_lines = $imap->get( $message_number, '1.1' ) or die $imap->errstr;
This method fetches a message and returns its lines as an array or, the actual
message. On failure, either an empty list is returned and the "errstr()" error
handler is set with the error message.
Optionally, a part can be specified in order to fetch a specific portion of a message.
This is the raw, encoded body of the message part. The part number is a set of zero
or more part specifiers delimited by periods. Every message has at least one part.
Specifying a part of '1' returns the raw, encoded body. This is only useful if you
know the header information such as encoding.
Historically, "get()" returned the array of lines as a reference to the array instead
of returning the message or the array itself. Please note that it still does this,
although it may be deprecated in the future.
The scalar result returned is actually a blessed arrayref with the stringify member
overloaded. If you're intending to use the resulting message as a string more than
once, it may make sense to force the stringification first.
my $message = $imap->get(1);
$message = "$message"; # force stringification
It is not normally necessary to do this.
put
$imap->put( $mailbox_name, $message, @flags ) or warn $imap->errstr;
Save a message to the server under the folder named $mailbox_name. You may optionally
specify flags for the mail (e.g. "\Seen", "\Answered"), but they must start with a
slash.
If $message is an arrayref, the lines will be printed correctly.
msg_flags
my @flags = $imap->msg_flags( $message_number );
my $flags = $imap->msg_flags( $message_number );
# aught to come out roughly the same
print "Flags on message #$message_number: @flags\n";
print "Flags on message #$message_number: $flags\n";
Detecting errors with this member functions is usually desirable. In the scalar
context, detecting an error is synonymous with testing for defined.
if( defined( my $flags = $imap->msg_flags($num) ) ) {
# it has $flags!
} else {
warn "problem listing flags for message #$num: "
. $imap->errstr;
}
In list context, you must call waserr() to test for success.
my @flags = $imap->msg_flags($num);
warn "problem listing flags for msg #$num: "
. $imap->errstr if $imap->waserr;
getfh
my $file = $imap->getfh( $message_number ); print <$file>;
On success this method returns a file handle pointing to the message identified by the
required parameter. On failure, nothing is returned and the "errstr()" error handler
is set with the error message.
quit
$imap->quit;
OR
$imap->quit(BOOL);
This method logs out of the IMAP server, expunges the selected mailbox, and closes the
connection. No error message will ever be returned from this method.
Optionally if BOOL is TRUE \fIs0(1) then a hard quit is performed which closes the
socket connection. This hard quit will still issue both EXPUNGE and LOGOUT commands
however the response is ignored and the socket is closed after issuing the commands.
logout
$imap->logout;
This method is just like the quit method except that it does not have a hard quit
option and it does not expunge the mailbox before it hangs up and closes the socket.
last
my $message_number = $imap->last;
This method returns the message number of the last message in the selected mailbox,
since the last time the mailbox was selected. On failure, nothing is returned and the
"errstr()" error handler is set with the error message.
delete
print "Gone!" if $imap->delete( $message_number );
This method sets the "\Deleted" flag on the given message (or messages). On success it
returns true, false on failure and the "errstr()" error handler is set with the error
message. If the flag was already there, no error is produced. I takes either a
message number or "sequence set" as the only argument. Note that messages aren't
actually deleted until they are expunged (see expunge_mailbox).
undelete
print "Resurrected!" if $imap->undelete( $message_number );
This method removes the "\Deleted" flag on the given message. On success it returns
true, false on failure and the "errstr()" error handler is set with the error message.
If the flag wasn't there, no error is produced.
see
print "You've seen message #$msgno" if $imap->see( $messageno );
This method sets the "\Seen" flag on the given message. On success it returns true,
false on failure and the "errstr()" error handler is set with the error message. If
the flag was already there, no error is produced.
unsee
print "You've not seen message #$msgno" if $imap->unsee( $messageno );
This method removes the "\Seen" flag on the given message. On success it returns true,
false on failure and the "errstr()" error handler is set with the error message. If
the flag wasn't there, no error is produced.
add_flags
delete and see above really just call this function for those flags.
$imap->add_flags( $msgno, qw(\Seen \Deleted) )
or die $imap->errstr;
sub_flags
unsee above really just calls this function for that flag.
$imap->sub_flags( $msgno, '\Seen' ) or die $imap->errstr;
mailboxes
my @boxes = $imap->mailboxes;
my @folders = $imap->mailboxes("Mail/%");
my @lists = $imap->mailboxes("lists/perl/*", "/Mail/");
This method returns a list of mailboxes. When called with no arguments it recurses
from the IMAP root to get all mailboxes. The first optional argument is a mailbox path
and the second is the path reference. RFC 3501 section 6.3.8 has more information.
On failure nothing is returned and the "errstr()" error handler is set with the error
message.
mailboxes_subscribed
my @boxes = $imap->mailboxes_subscribed;
my @folders = $imap->mailboxes_subscribed("Mail/%");
my @lists = $imap->mailboxes_subscribed("lists/perl/*", "/Mail/");
This method returns a list of mailboxes subscribed to. When called with no arguments
it recurses from the IMAP root to get all mailboxes. The first optional argument is a
mailbox path and the second is the path reference. RFC 3501 has more information.
On failure nothing is returned and the "errstr()" error handler is set with the error
message.
create_mailbox
print "Created" if $imap->create_mailbox( "/Mail/lists/perl/advocacy" );
This method creates the mailbox named in the required argument. Returns true on
success, false on failure and the "errstr()" error handler is set with the error
message.
expunge_mailbox
my @expunged = $imap->expunge_mailbox( "/Mail/lists/perl/advocacy" );
die $imap->errstr if $imap->waserr;
my $expunged = $imap->expunge_mailbox( "/Mail/lists/perl/advocacy" )
or die $imap->errstr;
This method removes all mail marked as deleted in the mailbox named in the required
argument. Returns either the number of messages that were expunged, or the indexes of
those messages -- which has a questionable usefulness since it tends to return numbers
that don't relate to the message numbers marked with the "\Deleted" flags.
If 0 messages were expunged without error, the function will return 0E0 so it will
still test true, but also evaluate to 0.
In list context, you must call waserr() to test for success.
delete_mailbox
print "Deleted" if $imap->delete_mailbox( "/Mail/lists/perl/advocacy" );
This method deletes the mailbox named in the required argument. Returns true on
success, false on failure and the "errstr()" error handler is set with the error
message.
rename_mailbox
print "Renamed" if $imap->rename_mailbox( $old => $new );
This method renames the mailbox in the first required argument to the mailbox named in
the second required argument. Returns true on success, false on failure and the
"errstr()" error handler is set with the error message.
folder_subscribe
print "Subscribed" if $imap->folder_subscribe( "/Mail/lists/perl/advocacy" );
This method subscribes to the folder. Returns true on success, false on failure and
the "errstr()" error handler is set with the error message.
folder_unsubscribe
print "Unsubscribed" if $imap->folder_unsubscribe( "/Mail/lists/perl/advocacy" );
This method un-subscribes to the folder. Returns true on success, false on failure and
the "errstr()" error handler is set with the error message.
copy
print "copied" if $imap->copy( $message_number, $mailbox );
This method copies the message number (or "sequence set") in the currently selected
mailbox to the folder specified in the second argument. Both arguments are required.
On success this method returns true. Returns false on failure and the "errstr()" error
handler is set with the error message.
uidcopy
print "copied" if $imap->uidcopy( $message_uid, $mailbox );
This method is identical to "copy()" above, except that it uses UID numbers instead of
sequence numbers.
noop
$imap->noop;
Performs a null operation. This may be needed to get updates on a mailbox, or ensure
that the server does not close the connection as idle. RFC 3501 states that servers'
idle timeouts must not be less than 30 minutes.
errstr
print "Login ERROR: " . $imap->errstr . "\n" if !$imap->login($user, $pass);
Return the last error string captured for the last operation which failed.
waserr
my @flags = $imap->msg_flags(14);
die $imap->errstr if $imap->waserr;
Because "msg_flags()" can optionally return a list, it's not really possible to detect
failure in list context. Therefore, you must call "waserr()" if you wish to detect
errors.
Few of the Net::IMAP::Simple methods use "waserr()". The ones that do will mention
it.
list2range
Sometimes you have a long list of sequence numbers which are consecutive and really
want to be an IMAP-style range.
my @list = (5..9, 13..38, 55,56,57);
my $short = $imap->list2range(@list);
# $short how says: 5:9,13:38,55:57
range2list
Pretty much the opposite of "list2range".
my @list = $imap->range2list("1,3,5:9");
# @list is (1,3,5,6,7,8,9);
SEARCHING
search
This function returns an array of message numbers (in list context) or the number of
matched messages (in scalar context). It takes a single argument: the search.
IMAP searching can be a little confusing and this function makes no attempt to parse
your searches. If you wish to do searches by hand, please see RFC 3501.
IMAP sorting (see RFC 5256) is supported via an optional second argument. The RFC
requires the charset be specified, which can be provided via the optional third
argument (defaults to UTF-8).
Here are a few examples:
my @ids = $imap->search("UNSEEN");
my @ids = $imap->search('SUBJECT "blarg is \"blarg\""');
my @ids = $imap->search('FROM "joe@aol.com"');
my @ids = $imap->search("DELETED");
# example from RFC 3501, search terms are ANDed together
my @ids = $imap->search('FLAGGED SINCE 1-Feb-1994 NOT FROM "Smith"');
# example from RFC 3501, search terms are ORed together
my @ids = $imap->search('OR BODY "blard" SUBJECT "blarg"');
# flagged and ( since x or !from y ):
my @ids = $imap->search('FLAGGED OR SINCE x NOT FROM "y"');
# no typo above, see the RFC
# example from RFC 5256, sorted by subject and reverse date
my @ids = $imap->search('BODY "zaphod"', 'SUBJECT REVERSE DATE');
Since this module is meant to be simple, Net::IMAP::Simple has a few search helpers.
If you need fancy booleans and things, you'll have to learn search. If you need a
quick search for unseen messages, see below.
These all return an array of messages or count of messages exactly as the search
function does. Some of them take arguments, some do not. They do try to grok your
arguments slightly, the mechanics of this (if any) will be mentioned below.
search_seen
Returns numbers of messages that have the \Seen flag.
search_recent
Returns numbers of messages that have the \Recent flag.
search_answered
Returns numbers of messages that have the \Answered flag.
search_deleted
Returns numbers of messages that have the \Deleted flag.
search_flagged
Returns numbers of messages that have the \Flagged flag.
search_draft
Returns numbers of messages that have the \Draft flag.
search_unseen
Returns numbers of messages that do not have the \Seen flag.
search_old
Returns numbers of messages that do not have the \Recent flag.
search_unanswered
Returns numbers of messages that do not have the \Answered flag.
search_undeleted
Returns numbers of messages that do not have the \Deleted flag.
search_unflagged
Returns numbers of messages that do not have the \Flagged flag.
search_smaller
This function takes a single argument we'll call "<x>" and returns numbers of
messages that are smaller than "<x>" octets. This function will try to force your
argument to be a number before passing it to the IMAP server.
search_larger
This function takes a single argument we'll call "<x>" and returns numbers of
messages that are larger than "<x>" octets. This function will try to force your
argument to be a number before passing it to the IMAP server.
search_from
This function takes a single argument we'll call "<x>" and returns numbers of
messages that have "<x>" in the from header. This function will attempt to force
your string into the RFC3501 quoted-string format.
search_to
This function takes a single argument we'll call "<x>" and returns numbers of
messages that have "<x>" in the to header. This function will attempt to force
your string into the RFC3501 quoted-string format.
search_cc
This function takes a single argument we'll call "<x>" and returns numbers of
messages that have "<x>" in the cc header. This function will attempt to force
your string into the RFC3501 quoted-string format.
search_bcc
This function takes a single argument we'll call "<x>" and returns numbers of
messages that have "<x>" in the bcc header. This function will attempt to force
your string into the RFC3501 quoted-string format.
search_subject
This function takes a single argument we'll call "<x>" and returns numbers of
messages that have "<x>" in the subject header. This function will attempt to
force your string into the RFC3501 quoted-string format.
search_body
This function takes a single argument we'll call "<x>" and returns numbers of
messages that have "<x>" in the message body. This function will attempt to force
your string into the RFC3501 quoted-string format.
search_before
This function takes a single argument we'll call "<x>" and returns numbers of
messages that were received before "<x>". If you have Date::Manip installed
(optional), this function will attempt to force the date into the format
"%d-%b-%Y" (date-monthName-year) as RFC3501 requires. If you do not have that
module, no attempt will be made to coerce your date into the correct format.
search_since
This function takes a single argument we'll call "<x>" and returns numbers of
messages that were received after "<x>". If you have Date::Manip installed
(optional), this function will attempt to force the date into the format
"%d-%m-%Y" (date-month-year) as RFC3501 requires. If you do not have that module,
no attempt will be made to coerce your date into the correct format.
search_sent_before
This function takes a single argument we'll call "<x>" and returns numbers of
messages that have a header date before "<x>". If you have Date::Manip installed
(optional), this function will attempt to force the date into the format
"%d-%m-%Y" (date-month-year) as RFC3501 requires. If you do not have that module,
no attempt will be made to coerce your date into the correct format.
search_sent_since
This function takes a single argument we'll call "<x>" and returns numbers of
messages that have a header date after "<x>". If you have Date::Manip installed
(optional), this function will attempt to force the date into the format
"%d-%m-%Y" (date-month-year) as RFC3501 requires. If you do not have that module,
no attempt will be made to coerce your date into the correct format.
uidsearch
This function works exactly like "search()" but it returns UIDs instead of sequence
numbers. The convenient shortcuts above are not provided for it.
OTHER NOTES
sequence set
Message numbers are never checked before being passed to the IMAP server (this is a
"simple" module after all), so in most places where a message number is required, you
can instead use so-called sequence sets. Examples:
$imap->copy( "3,4,9:22", "ANOTHERBOX" ) or die $imap->errstr;
$imap->delete( "3,4,9:22", "ANOTHERBOX" ) or die $imap->errstr;
AUTHOR
Creator
Joao Fonseca "<joao_g_fonseca@yahoo.com>"
Maintainer 2004
Casey West "<casey@geeknst.com>"
Maintainer 2005
Colin Faber "<cfaber@fpsn.net>"
Maintainer 2009
Paul Miller "<jettero@cpan.org>"
COPYRIGHT
Copyright (c) 2009-2010 Paul Miller Copyright (c) 2005 Colin Faber Copyright (c) 2004
Casey West Copyright (c) 1999 Joao Fonseca
All rights reserved. This program is free software; you can redistribute it and/or modify
it under the same terms as Perl itself.
LICENSE
This module is free software. You can redistribute it and/or modify it under the terms of
the Artistic License 2.0.
This program is distributed in the hope that it will be useful, but without any warranty;
without even the implied warranty of merchantability or fitness for a particular purpose.
[This software may have had previous licenses, of which the current maintainer is
completely unaware. If this is so, it is possible the above license is incorrect or
invalid.]
BUGS
There are probably bugs. But don't worry, the current maintainer takes them very
seriously and will usually triage (at least) within a single day.
<https://rt.cpan.org/Dist/Display.html?Queue=Net-IMAP-Simple>
SEE ALSO
perl, Net::IMAP::Server, IO::Socket::SSL, IO::Socket::INET6