Provided by: libnumber-tolerant-perl_1.708-1_all 
NAME
Number::Tolerant - tolerance ranges for inexact numbers
VERSION
version 1.708
SYNOPSIS
use Number::Tolerant;
my $range = tolerance(10 => to => 12);
my $random = 10 + rand(2);
die "I shouldn't die" unless $random == $range;
print "This line will always print.\n";
DESCRIPTION
Number::Tolerant creates a number-like object whose value refers to a range of possible
values, each equally acceptable. It overloads comparison operations to reflect this.
I use this module to simplify the comparison of measurement results to specified
tolerances.
reject $product unless $measurement == $specification;
METHODS
Instantiation
new
tolerance
There is a "new" method on the Number::Tolerant class, but it also exports a simple
function, "tolerance", which will return an object of the Number::Tolerant class. Both
use the same syntax:
my $range = Number::Tolerant->new( $x => $method => $y);
my $range = tolerance( $x => $method => $y);
The meaning of $x and $y are dependent on the value of $method, which describes the nature
of the tolerance. Tolerances can be defined in five ways, at present:
method range
-------------------+------------------
plus_or_minus | x +/- y
plus_or_minus_pct | x +/- (y% of x)
or_more | x to Inf
or_less | x to -Inf
more_than | x to Inf, not x
less_than | x to -Inf, not x
to | x to y
infinite | -Inf to Inf
offset | (x + y1) to (x + y2)
For "or_less" and "or_more", $y is ignored if passed. For "infinite", neither $x nor $y
is used; "infinite" should be the sole argument. The first two arguments can be reversed
for "more_than" and "less_than", to be more English-like.
Offset tolerances are slightly unusual. Here is an example:
my $offset_tolerance = tolerance(10 => offset => (-3, 5));
# stringifies to: 10 (-3 +5)
An offset is very much like a "plus_or_minus" tolerance, but its center value is not
necessarily the midpoint between its extremes. This is significant for comparisons and
numifications of the tolerance. Given the following two tolerances:
my $pm_dice = tolerance(10.5 => plus_or_minus => 7.5);
my $os_dice = tolerance(11 => offset => (-8, 7));
The first will sort as numerically less than the second.
If the given arguments can't be formed into a tolerance, an exception will be raised.
from_string
A new tolerance can be instantiated from the stringification of an old tolerance. For
example:
my $range = Number::Tolerant->from_string("10 to 12");
die "Everything's OK!" if 11 == $range; # program dies of joy
This will not yet parse stringified unions, but that will be implemented in the future.
(I just don't need it yet.)
If a string can't be parsed, an exception is raised.
stringify_as
my $string = $tolerance->stringify_as($type);
This method does nothing! Someday, it will stringify the given tolerance as a different
type, if possible. "10 +/- 1" will "stringify_as('plus_or_minus_pct')" to "10 +/- 10%"
for example.
numify
my $n = $tolerance->numify;
This returns the numeric form of a tolerance. If a tolerance has both a minimum and a
maximum, and they are the same, then that is the numification. Otherwise, numify returns
undef.
Overloading
Tolerances overload a few operations, mostly comparisons.
boolean
Tolerances are always true.
numify
Most tolerances numify to undef; see "numify".
stringify
A tolerance stringifies to a short description of itself, generally something like "m
< x < n"
infinite - "any number"
to - "m <= x <= n"
or_more - "m <= x"
or_less - "x <= n"
more_than - "m < x"
less_than - "x < n"
offset - "x (-y1 +y2)"
constant - "x"
plus_or_minus - "x +/- y"
plus_or_minus_pct - "x +/- y%"
equality
A number is equal to a tolerance if it is neither less than nor greater than it. (See
below).
smart match
Same as equality.
comparison
A number is greater than a tolerance if it is greater than its maximum value.
A number is less than a tolerance if it is less than its minimum value.
No number is greater than an "or_more" tolerance or less than an "or_less" tolerance.
"...or equal to" comparisons include the min/max values in the permissible range, as
common sense suggests.
tolerance intersection
A tolerance "&" a tolerance or number is the intersection of the two ranges.
Intersections allow you to quickly narrow down a set of tolerances to the most
stringent intersection of values.
tolerance(5 => to => 6) & tolerance(5.5 => to => 6.5);
# this yields: tolerance(5.5 => to => 6)
If the given values have no intersection, "()" is returned.
An intersection with a normal number will yield that number, if it is within the
tolerance.
tolerance union
A tolerance "|" a tolerance or number is the union of the two. Unions allow multiple
tolerances, whether they intersect or not, to be treated as one. See
Number::Tolerant::Union for more information.
EXTENDING
This feature is slighly experimental, but it's here.
New tolerance types may be written as subclasses of Number::Tolerant::Type, providing the
interface described in its documentation. They can then be enabled or disabled with the
following methods:
" enable_plugin "
Number::Tolerant->enable_plugin($class_name);
This method enables the named class, so that attempts to create new tolerances will check
against this class. Classes are checked against "validate_plugin" before being enabled.
An exception is thrown if the class does not appear to provide the Number::Tolerant::Type
interface.
" disable_plugin "
Number::Tolerant->disable_plugin($class_name);
This method will disable the named class, so that future attempts to create new tolerances
will not check against this class.
" validate_plugin "
Number::Tolerant->validate_plugin($class_name);
This method checks (naively) that the given class provides the interface defined in
Number::Tolerant::Type. If it does not, an exception is thrown.
TODO
• Extend "from_string" to cover unions.
• Extend "from_string" to include Number::Range-type specifications.
• Allow translation into forms not originally used:
my $range = tolerance(9 => to => 17);
my $range_pm = $range->convert_to('plus_minus');
$range->stringify_as('plus_minus_pct');
• Create a factory so that you can simultaneously work with two sets of plugins.
This one is very near completion. There will now be two classes that should be used:
Number::Tolerant::Factory, which produces tolerances, and Number::Tolerant::Tolerance,
which is a tolerance. Both will inherit from N::T, for supporting old code, and N::T
will dispatch construction methods to a default factory.
SEE ALSO
The module Number::Range provides another way to deal with ranges of numbers. The major
differences are: N::R is set-like, not range-like; N::R does not overload any operators.
Number::Tolerant will not (like N::R) attempt to parse a textual range specification like
"1..2,5,7..10" unless specifically instructed to. (The valid formats for strings passed
to "from_string" does not match Number::Range exactly. See TODO.)
The "Number::Range" code:
$range = Number::Range->new("10..15","20..25");
Is equivalent to the "Number::Tolerant" code:
$range = Number::Tolerant::Union->new(10..15,20..25);
...while the following code expresses an actual range:
$range = tolerance(10 => to => 15) | tolerance(20 => to => 25);
THANKS
Thanks to Yuval Kogman and #perl-qa for helping find the bizarre bug that drove the
minimum required perl up to 5.8
Thanks to Tom Freedman, who reminded me that this code was fun to work on, and also
provided the initial implementation for the offset type.
AUTHOR
Ricardo Signes <rjbs@cpan.org>
CONTRIBUTORS
• Alexandre Mestiashvili <alex@biotec.tu-dresden.de>
• Karen Etheridge <ether@cpan.org>
• Michael Carman <mjcarman@cpan.org>
• Ricardo SIGNES <rjbs@codesimply.com>
• Smylers <Smylers@stripey.com>
COPYRIGHT AND LICENSE
This software is copyright (c) 2004 by Ricardo Signes.
This is free software; you can redistribute it and/or modify it under the same terms as
the Perl 5 programming language system itself.