Provided by: tcl8.4-doc_8.4.20-8_all 
NAME
Tcl_RegExpMatch, Tcl_RegExpCompile, Tcl_RegExpExec, Tcl_RegExpRange, Tcl_GetRegExpFromObj,
Tcl_RegExpMatchObj, Tcl_RegExpExecObj, Tcl_RegExpGetInfo - Pattern matching with regular
expressions
SYNOPSIS
#include <tcl.h>
int
Tcl_RegExpMatchObj(interp, strObj, patObj)
int
Tcl_RegExpMatch(interp, string, pattern)
Tcl_RegExp
Tcl_RegExpCompile(interp, pattern)
int
Tcl_RegExpExec(interp, regexp, string, start)
Tcl_RegExpRange(regexp, index, startPtr, endPtr)
Tcl_RegExp │
Tcl_GetRegExpFromObj(interp, patObj, cflags) │
int │
Tcl_RegExpExecObj(interp, regexp, objPtr, offset, nmatches, eflags) │
Tcl_RegExpGetInfo(regexp, infoPtr) │
ARGUMENTS
Tcl_Interp *interp (in) Tcl interpreter to use for error reporting. The
interpreter may be NULL if no error reporting is desired. │
Tcl_Obj *strObj (in/out) │
Refers to the object from which to get the string to │
search. The internal representation of the object may be │
converted to a form that can be efficiently searched. │
Tcl_Obj *patObj (in/out) │
Refers to the object from which to get a regular │
expression. The compiled regular expression is cached in │
the object.
char *string (in) String to check for a match with a regular expression.
CONST char *pattern (in) String in the form of a regular expression pattern.
Tcl_RegExp regexp (in) Compiled regular expression. Must have been returned
previously by Tcl_GetRegExpFromObj or Tcl_RegExpCompile.
char *start (in) If string is just a portion of some other string, this
argument identifies the beginning of the larger string.
If it isn't the same as string, then no ^ matches will be
allowed.
int index (in) Specifies which range is desired: 0 means the range of
the entire match, 1 or greater means the range that
matched a parenthesized sub-expression. │
CONST char **startPtr(out) │
The address of the first character in the range is stored │
here, or NULL if there is no such range. │
CONST char **endPtr (out) │
The address of the character just after the last one in │
the range is stored here, or NULL if there is no such │
range. │
int cflags (in) │
OR-ed combination of compilation flags. See below for │
more information. │
Tcl_Obj *objPtr (in/out) │
An object which contains the string to check for a match │
with a regular expression. │
int offset (in) │
The character offset into the string where matching │
should begin. The value of the offset has no impact on ^ │
matches. This behavior is controlled by eflags. │
int nmatches (in) │
The number of matching subexpressions that should be │
remembered for later use. If this value is 0, then no │
subexpression match information will be computed. If the │
value is -1, then all of the matching subexpressions will │
be remembered. Any other value will be taken as the │
maximum number of subexpressions to remember. │
int eflags (in) │
OR-ed combination of the values TCL_REG_NOTBOL and │
TCL_REG_NOTEOL. See below for more information. │
Tcl_RegExpInfo *infoPtr(out) │
The address of the location where information about a │
previous match should be stored by Tcl_RegExpGetInfo.
_________________________________________________________________
DESCRIPTION
Tcl_RegExpMatch determines whether its pattern argument matches regexp, where regexp is
interpreted as a regular expression using the rules in the re_syntax reference page. If
there is a match then Tcl_RegExpMatch returns 1. If there is no match then
Tcl_RegExpMatch returns 0. If an error occurs in the matching process (e.g. pattern is
not a valid regular expression) then Tcl_RegExpMatch returns -1 and leaves an error
message in the interpreter result. Tcl_RegExpMatchObj is similar to Tcl_RegExpMatch │
except it operates on the Tcl objects strObj and patObj instead of UTF strings. │
Tcl_RegExpMatchObj is generally more efficient than Tcl_RegExpMatch, so it is the │
preferred interface.
Tcl_RegExpCompile, Tcl_RegExpExec, and Tcl_RegExpRange provide lower-level access to the
regular expression pattern matcher. Tcl_RegExpCompile compiles a regular expression
string into the internal form used for efficient pattern matching. The return value is a
token for this compiled form, which can be used in subsequent calls to Tcl_RegExpExec or
Tcl_RegExpRange. If an error occurs while compiling the regular expression then
Tcl_RegExpCompile returns NULL and leaves an error message in the interpreter result.
Note: the return value from Tcl_RegExpCompile is only valid up to the next call to
Tcl_RegExpCompile; it is not safe to retain these values for long periods of time.
Tcl_RegExpExec executes the regular expression pattern matcher. It returns 1 if string
contains a range of characters that match regexp, 0 if no match is found, and -1 if an
error occurs. In the case of an error, Tcl_RegExpExec leaves an error message in the
interpreter result. When searching a string for multiple matches of a pattern, it is
important to distinguish between the start of the original string and the start of the
current search. For example, when searching for the second occurrence of a match, the
string argument might point to the character just after the first match; however, it is
important for the pattern matcher to know that this is not the start of the entire string,
so that it doesn't allow ^ atoms in the pattern to match. The start argument provides
this information by pointing to the start of the overall string containing string. Start
will be less than or equal to string; if it is less than string then no ^ matches will be
allowed.
Tcl_RegExpRange may be invoked after Tcl_RegExpExec returns; it provides detailed
information about what ranges of the string matched what parts of the pattern.
Tcl_RegExpRange returns a pair of pointers in *startPtr and *endPtr that identify a range
of characters in the source string for the most recent call to Tcl_RegExpExec. Index
indicates which of several ranges is desired: if index is 0, information is returned about
the overall range of characters that matched the entire pattern; otherwise, information
is returned about the range of characters that matched the index'th parenthesized
subexpression within the pattern. If there is no range corresponding to index then NULL
is stored in *startPtr and *endPtr.
Tcl_GetRegExpFromObj, Tcl_RegExpExecObj, and Tcl_RegExpGetInfo are object interfaces that │
provide the most direct control of Henry Spencer's regular expression library. For users │
that need to modify compilation and execution options directly, it is recommended that you │
use these interfaces instead of calling the internal regexp functions. These interfaces │
handle the details of UTF to Unicode translations as well as providing improved │
performance through caching in the pattern and string objects. │
Tcl_GetRegExpFromObj attempts to return a compiled regular expression from the patObj. If │
the object does not already contain a compiled regular expression it will attempt to │
create one from the string in the object and assign it to the internal representation of │
the patObj. The return value of this function is of type Tcl_RegExp. The return value is │
a token for this compiled form, which can be used in subsequent calls to Tcl_RegExpExecObj │
or Tcl_RegExpGetInfo. If an error occurs while compiling the regular expression then │
Tcl_GetRegExpFromObj returns NULL and leaves an error message in the interpreter result. │
The regular expression token can be used as long as the internal representation of patObj │
refers to the compiled form. The eflags argument is a bitwise OR of zero or more of the │
following flags that control the compilation of patObj: │
TCL_REG_ADVANCED │
Compile advanced regular expressions (`AREs'). This mode corresponds to the │
normal regular expression syntax accepted by the Tcl regexp and regsub commands. │
TCL_REG_EXTENDED │
Compile extended regular expressions (`EREs'). This mode corresponds to the │
regular expression syntax recognized by Tcl 8.0 and earlier versions. │
TCL_REG_BASIC │
Compile basic regular expressions (`BREs'). This mode corresponds to the regular │
expression syntax recognized by common Unix utilities like sed and grep. This is │
the default if no flags are specified. │
TCL_REG_EXPANDED │
Compile the regular expression (basic, extended, or advanced) using an expanded │
syntax that allows comments and whitespace. This mode causes non-backslashed │
non-bracket-expression white space and #-to-end-of-line comments to be ignored. │
TCL_REG_QUOTE │
Compile a literal string, with all characters treated as ordinary characters. │
TCL_REG_NOCASE │
Compile for matching that ignores upper/lower case distinctions. │
TCL_REG_NEWLINE │
Compile for newline-sensitive matching. By default, newline is a completely │
ordinary character with no special meaning in either regular expressions or │
strings. With this flag, `[^' bracket expressions and `.' never match newline, │
`^' matches an empty string after any newline in addition to its normal function, │
and `$' matches an empty string before any newline in addition to its normal │
function. REG_NEWLINE is the bitwise OR of REG_NLSTOP and REG_NLANCH. │
TCL_REG_NLSTOP │
Compile for partial newline-sensitive matching, with the behavior of `[^' bracket │
expressions and `.' affected, but not the behavior of `^' and `$'. In this mode, │
`[^' bracket expressions and `.' never match newline. │
TCL_REG_NLANCH │
Compile for inverse partial newline-sensitive matching, with the behavior of of │
`^' and `$' (the ``anchors'') affected, but not the behavior of `[^' bracket │
expressions and `.'. In this mode `^' matches an empty string after any newline │
in addition to its normal function, and `$' matches an empty string before any │
newline in addition to its normal function. │
TCL_REG_NOSUB │
Compile for matching that reports only success or failure, not what was matched. │
This reduces compile overhead and may improve performance. Subsequent calls to │
Tcl_RegExpGetInfo or Tcl_RegExpRange will not report any match information. │
TCL_REG_CANMATCH │
Compile for matching that reports the potential to complete a partial match given │
more text (see below). │
Only one of TCL_REG_EXTENDED, TCL_REG_ADVANCED, TCL_REG_BASIC, and TCL_REG_QUOTE may be │
specified. │
Tcl_RegExpExecObj executes the regular expression pattern matcher. It returns 1 if objPtr │
contains a range of characters that match regexp, 0 if no match is found, and -1 if an │
error occurs. In the case of an error, Tcl_RegExpExecObj leaves an error message in the │
interpreter result. The nmatches value indicates to the matcher how many subexpressions │
are of interest. If nmatches is 0, then no subexpression match information is recorded, │
which may allow the matcher to make various optimizations. If the value is -1, then all │
of the subexpressions in the pattern are remembered. If the value is a positive integer, │
then only that number of subexpressions will be remembered. Matching begins at the │
specified Unicode character index given by offset. Unlike Tcl_RegExpExec, the behavior of │
anchors is not affected by the offset value. Instead the behavior of the anchors is │
explicitly controlled by the eflags argument, which is a bitwise OR of zero or more of the │
following flags: │
TCL_REG_NOTBOL │
The starting character will not be treated as the beginning of a line or the │
beginning of the string, so `^' will not match there. Note that this flag has no │
effect on how `\A' matches. │
TCL_REG_NOTEOL │
The last character in the string will not be treated as the end of a line or the │
end of the string, so '$' will not match there. Note that this flag has no │
effect on how `\Z' matches. │
Tcl_RegExpGetInfo retrieves information about the last match performed with a given │
regular expression regexp. The infoPtr argument contains a pointer to a structure that is │
defined as follows: │
typedef struct Tcl_RegExpInfo { │
int nsubs; │
Tcl_RegExpIndices *matches; │
long extendStart; │
} Tcl_RegExpInfo; │
The nsubs field contains a count of the number of parenthesized subexpressions within the │
regular expression. If the TCL_REG_NOSUB was used, then this value will be zero. The │
matches field points to an array of nsubs values that indicate the bounds of each │
subexpression matched. The first element in the array refers to the range matched by the │
entire regular expression, and subsequent elements refer to the parenthesized │
subexpressions in the order that they appear in the pattern. Each element is a structure │
that is defined as follows: │
typedef struct Tcl_RegExpIndices { │
long start; │
long end; │
} Tcl_RegExpIndices; │
The start and end values are Unicode character indices relative to the offset location │
within objPtr where matching began. The start index identifies the first character of the │
matched subexpression. The end index identifies the first character after the matched │
subexpression. If the subexpression matched the empty string, then start and end will be │
equal. If the subexpression did not participate in the match, then start and end will be │
set to -1. │
The extendStart field in Tcl_RegExpInfo is only set if the TCL_REG_CANMATCH flag was used. │
It indicates the first character in the string where a match could occur. If a match was │
found, this will be the same as the beginning of the current match. If no match was │
found, then it indicates the earliest point at which a match might occur if additional │
text is appended to the string. If it is no match is possible even with further text, │
this field will be set to -1.
SEE ALSO
re_syntax(3tcl)
KEYWORDS
match, pattern, regular expression, string, subexpression, Tcl_RegExpIndices,
Tcl_RegExpInfo