Provided by: libxml-bare-perl_0.53-1build2_amd64 
NAME
XML::Bare - Minimal XML parser implemented via a C state engine
VERSION
0.53
SYNOPSIS
use XML::Bare;
my $ob = new XML::Bare( text => '<xml><name>Bob</name></xml>' );
# Parse the xml into a hash tree
my $root = $ob->parse();
# Print the content of the name node
print $root->{xml}->{name}->{value};
---
# Load xml from a file ( assume same contents as first example )
my $ob2 = new XML::Bare( file => 'test.xml' );
my $root2 = $ob2->parse();
$root2->{xml}->{name}->{value} = 'Tim';
# Save the changes back to the file
$ob2->save();
---
# Load xml and verify against XBS ( XML Bare Schema )
my $xml_text = '<xml><item name=bob/></xml>''
my $schema_text = '<xml><item* name=[a-z]+></item*></xml>'
my $ob = new XML::Bare( text => $xml_text, schema => { text => $schema_text } );
$ob->parse(); # this will error out if schema is invalid
DESCRIPTION
This module is a 'Bare' XML parser. It is implemented in C. The parser itself is a simple
state engine that is less than 500 lines of C. The parser builds a C struct tree from
input text. That C struct tree is converted to a Perl hash by a Perl function that makes
basic calls back to the C to go through the nodes sequentially.
The parser itself will only cease parsing if it encounters tags that are not closed
properly. All other inputs will parse, even invalid inputs. To allowing checking for
validity, a schema checker is included in the module as well.
The schema format is custom and is meant to be as simple as possible. It is based loosely
around the way multiplicity is handled in Perl regular expressions.
Supported XML
To demonstrate what sort of XML is supported, consider the following examples. Each of the
PERL statements evaluates to true.
• Node containing just text
XML: <xml>blah</xml>
PERL: $root->{xml}->{value} eq "blah";
• Subset nodes
XML: <xml><name>Bob</name></xml>
PERL: $root->{xml}->{name}->{value} eq "Bob";
• Attributes unquoted
XML: <xml><a href=index.htm>Link</a></xml>
PERL: $root->{xml}->{a}->{href}->{value} eq "index.htm";
• Attributes quoted
XML: <xml><a href="index.htm">Link</a></xml>
PERL: $root->{xml}->{a}->{href}->{value} eq "index.htm";
• CDATA nodes
XML: <xml><raw><![CDATA[some raw $~<!bad xml<>]]></raw></xml>
PERL: $root->{xml}->{raw}->{value} eq "some raw \$~<!bad xml<>";
• Multiple nodes; form array
XML: <xml><item>1</item><item>2</item></xml>
PERL: $root->{xml}->{item}->[0]->{value} eq "1";
• Forcing array creation
XML: <xml><multi_item/><item>1</item></xml>
PERL: $root->{xml}->{item}->[0]->{value} eq "1";
• One comment supported per node
XML: <xml><!--test--></xml>
PERL: $root->{xml}->{comment} eq 'test';
Schema Checking
Schema checking is done by providing the module with an XBS (XML::Bare Schema) to check
the XML against. If the XML checks as valid against the schema, parsing will continue as
normal. If the XML is invalid, the parse function will die, providing information about
the failure.
The following information is provided in the error message:
• The type of error
• Where the error occured ( line and char )
• A short snippet of the XML at the point of failure
XBS ( XML::Bare Schema ) Format
• Required nodes
XML: <xml></xml>
XBS: <xml/>
• Optional nodes - allow one
XML: <xml></xml>
XBS: <xml item?/>
or XBS: <xml><item?/></xml>
• Optional nodes - allow 0 or more
XML: <xml><item/></xml>
XBS: <xml item*/>
• Required nodes - allow 1 or more
XML: <xml><item/><item/></xml>
XBS: <xml item+/>
• Nodes - specified minimum and maximum number
XML: <xml><item/><item/></xml>
XBS: <xml item{1,2}/>
or XBS: <xml><item{1,2}/></xml>
or XBS: <xml><item{1,2}></item{1,2}></xml>
• Multiple acceptable node formats
XML: <xml><item type=box volume=20/><item type=line length=10/></xml>
XBS: <xml><item type=box volume/><item type=line length/></xml>
• Regular expressions checking for values
XML: <xml name=Bob dir=up num=10/>
XBS: <xml name=[A-Za-z]+ dir=up|down num=[0-9]+/>
• Require multi_ tags
XML: <xml><multi_item/></xml>
XBS: <xml item@/>
Parsed Hash Structure
The hash structure returned from XML parsing is created in a specific format. Besides as
described above, the structure contains some additional nodes in order to preserve
information that will allow that structure to be correctly converted back to XML.
Nodes may contain the following 3 additional subnodes:
• _i
The character offset within the original parsed XML of where the node begins. This is
used to provide line information for errors when XML fails a schema check.
• _pos
This is a number indicating the ordering of nodes. It is used to allow items in a perl
hash to be sorted when writing back to xml. Note that items are not sorted after parsing
in order to save time if all you are doing is reading and you do not care about the
order.
In future versions of this module an option will be added to allow you to sort your
nodes so that you can read them in order. ( note that multiple nodes of the same name
are stored in order )
• _att
This is a boolean value that exists and is 1 iff the node is an attribute.
Parsing Limitations / Features
• CDATA parsed correctly, but stripped if unneeded
Currently the contents of a node that are CDATA are read and put into the value hash,
but the hash structure does not have a value indicating the node contains CDATA.
When converting back to XML, the contents of the value hash are parsed to check for xml
incompatible data using a regular expression. If 'CDATA like' stuff is encountered, the
node is output as CDATA.
• Node position stored, but hash remains unsorted
The ordering of nodes is noted using the '_pos' value, but the hash itself is not
ordered after parsing. Currently items will be out of order when looking at them in the
hash.
Note that when converted back to XML, the nodes are then sorted and output in the
correct order to XML. Note that nodes of the same name with the same parent will be
grouped together; the position of the first item to appear will determine the output
position of the group.
• Comments are parsed but only one is stored per node.
For each node, there can be a comment within it, and that comment will be saved and
output back when dumping to XML.
• Comments override output of immediate value
If a node contains only a comment node and a text value, only the comment node will be
displayed. This is in line with treating a comment node as a node and only displaying
immediate values when a node contains no subnodes.
• PI sections are parsed, but discarded
• Unknown "<!" sections are parsed, but discarded
• Attributes may use no quotes, single quotes, quotes, or backtics
• Quoted attributes cannot contain escaped quotes
No escape character is recognized within quotes. As a result, regular quotes cannot be
stored to XML, or the written XML will not be correct, due to all attributes always
being written using quotes.
• Attributes are always written back to XML with quotes
• Nodes cannot contain subnodes as well as an immediate value
Actually nodes can in fact contain a value as well, but that value will be discarded if
you write back to XML. That value is equal to the first continuous string of text
besides a subnode.
<node>text<subnode/>text2</node>
( the value of node is text )
<node><subnode/>text</node>
( the value of node is text )
<node>
<subnode/>text
</node>
( the value of node is "\n " )
• Entities are not parsed
No entity parsing is done. This is intentional. Future versions of the module may
include a feature to automatically parse entities, but by default any such feature will
be disabled in order to keep from slowing down the parser.
Also, this is done so that round trip ( read and then write back out ) behavior is
consistent.
• Nodes named value
Previously iterations of this module had problems with nodes named 'value', due to the
fact that node contents are stored under the 'value' key already. The current version
should parse such files without any problem, although it may be confusing to see a
parsed tree with 'value' pointing to another hash containing 'value' as well.
In a future version of the module it will be possible to alter the name that values are
stored under.
Note that node values are stored under the key 'content' when the "simple" parsing mode
is used, so as to be consistent with XML::Simple.
Module Functions
• "$ob = XML::Bare->new( text => "[some xml]" )"
Create a new XML object, with the given text as the xml source.
• "$object = XML::Bare->new( file => "[filename]" )"
Create a new XML object, with the given filename/path as the xml source
• "$object = XML::Bare->new( text => "[some xml]", file => "[filename]" )"
Create a new XML object, with the given text as the xml input, and the given
filename/path as the potential output ( used by save() )
• "$object = XML::Bare->new( file => "data.xml", scheme => { file => "scheme.xbs" } )"
Create a new XML object and check to ensure it is valid xml by way of the XBS scheme.
• "$tree = $object->parse()"
Parse the xml of the object and return a tree reference
• "$tree = $object->simple()"
Alternate to the parse function which generates a tree similar to that generated by
XML::Simple. Note that the sets of nodes are turned into arrays always, regardless of
whether they have a 'name' attribute, unlike XML::Simple.
Note that currently the generated tree cannot be used with any of the functions in this
module that operate upon trees. The function is provided purely as a quick and dirty way
to read simple XML files.
• "$tree = xmlin( $xmlext, keeproot => 1 )"
The xmlin function is a shortcut to creating an XML::Bare object and parsing it using
the simple function. It behaves similarly to the XML::Simple function by the same name.
The keeproot option is optional and if left out the root node will be discarded, same as
the function in XML::Simple.
• "$text = $object->xml( [root] )"
Take the hash tree in [root] and turn it into cleanly indented ( 2 spaces ) XML text.
• "$text = $object->html( [root], [root node name] )"
Take the hash tree in [root] and turn it into nicely colorized and styled html. [root
node name] is optional.
• "$object->save()"
The the current tree in the object, cleanly indent it, and save it to the file parameter
specified when creating the object.
• "$value = xval $node, $default"
Returns the value of $node or $default if the node does not exist. If default is not
passed to the function, then '' is returned as a default value when the node does not
exist.
• "( $name, $age ) = xget( $personnode, qw/name age/ )"
Shortcut function to grab a number of values from a node all at the same time. Note that
this function assumes that all of the subnodes exist; it will fail if they do not.
• "$text = XML::Bare::clean( text => "[some xml]" )"
Shortcut to creating an xml object and immediately turning it into clean xml text.
• "$text = XML::Bare::clean( file => "[filename]" )"
Similar to previous.
• "XML::Bare::clean( file => "[filename]", save => 1 )"
Clean up the xml in the file, saving the results back to the file
• "XML::Bare::clean( text => "[some xml]", save => "[filename]" )"
Clean up the xml provided, and save it into the specified file.
• "XML::Bare::clean( file => "[filename1]", save => "[filename2]" )"
Clean up the xml in filename1 and save the results to filename2.
• "$html = XML::Bare::tohtml( text => "[some xml]", root => 'xml' )"
Shortcut to creating an xml object and immediately turning it into html. Root is
optional, and specifies the name of the root node for the xml ( which defaults to 'xml'
)
• "$object->add_node( [node], [nodeset name], name => value, name2 => value2, ... )"
Example:
$object->add_node( $root->{xml}, 'item', name => 'Bob' );
Result:
<xml>
<item>
<name>Bob</name>
</item>
</xml>
• "$object->add_node_after( [node], [subnode within node to add after], [nodeset name],
... )"
• "$object->del_node( [node], [nodeset name], name => value )"
Example:
Starting XML:
<xml>
<a>
<b>1</b>
</a>
<a>
<b>2</b>
</a>
</xml>
Code:
$xml->del_node( $root->{xml}, 'a', b=>'1' );
Ending XML:
<xml>
<a>
<b>2</b>
</a>
</xml>
• "$object->find_node( [node], [nodeset name], name => value )"
Example:
Starting XML:
<xml>
<ob>
<key>1</key>
<val>a</val>
</ob>
<ob>
<key>2</key>
<val>b</val>
</ob>
</xml>
Code:
$object->find_node( $root->{xml}, 'ob', key => '1' )->{val}->{value} = 'test';
Ending XML:
<xml>
<ob>
<key>1</key>
<val>test</val>
</ob>
<ob>
<key>2</key>
<val>b</val>
</ob>
</xml>
• "$object->find_by_perl( [nodeset], "[perl code]" )"
find_by_perl evaluates some perl code for each node in a set of nodes, and returns the
nodes where the perl code evaluates as true. In order to easily reference node values,
node values can be directly referred to from within the perl code by the name of the
node with a dash(-) in front of the name. See the example below.
Note that this function returns an array reference as opposed to a single node unlike
the find_node function.
Example:
Starting XML:
<xml>
<ob>
<key>1</key>
<val>a</val>
</ob>
<ob>
<key>2</key>
<val>b</val>
</ob>
</xml>
Code:
$object->find_by_perl( $root->{xml}->{ob}, "-key eq '1'" )->[0]->{val}->{value} = 'test';
Ending XML:
<xml>
<ob>
<key>1</key>
<val>test</val>
</ob>
<ob>
<key>2</key>
<val>b</val>
</ob>
</xml>
• "XML::Bare::merge( [nodeset1], [nodeset2], [id node name] )"
Merges the nodes from nodeset2 into nodeset1, matching the contents of each node based
up the content in the id node.
Example:
Code:
my $ob1 = new XML::Bare( text => "
<xml>
<multi_a/>
<a>bob</a>
<a>
<id>1</id>
<color>blue</color>
</a>
</xml>" );
my $ob2 = new XML::Bare( text => "
<xml>
<multi_a/>
<a>john</a>
<a>
<id>1</id>
<name>bob</name>
<bob>1</bob>
</a>
</xml>" );
my $root1 = $ob1->parse();
my $root2 = $ob2->parse();
merge( $root1->{'xml'}->{'a'}, $root2->{'xml'}->{'a'}, 'id' );
print $ob1->xml( $root1 );
Output:
<xml>
<multi_a></multi_a>
<a>bob</a>
<a>
<id>1</id>
<color>blue</color>
<name>bob</name>
<bob>1</bob>
</a>
</xml>
• "XML::Bare::del_by_perl( ... )"
Works exactly like find_by_perl, but deletes whatever matches.
• "XML::Bare::forcearray( [noderef] )"
Turns the node reference into an array reference, whether that node is just a single
node, or is already an array reference.
• "XML::Bare::new_node( ... )"
Creates a new node...
• "XML::Bare::newhash( ... )"
Creates a new hash with the specified value.
• "XML::Bare::simplify( [noderef] )"
Take a node with children that have immediate values and creates a hashref to reference
those values by the name of each child.
• "XML::Bare::hash2xml( [hashref] )"
Take a recursive hash tree ( perhaps generated by the simplify function ) and turn it
into a raw XML string. Note that this function does not indent nicely. You will need to
feed this string back into the parser and output it again if you want it to look nice. (
or you could use the 'clean' function to do it in one go )
• "XML::Bare->new( text => "[xml]", unsafe => 1 )"
An extra speedy way to parse XML. It is unsafe; may harm pets and children. Don't say
you weren't warned. 30% speed boost compared to the normal parsing. You -must- use
$ob->simple() in combination with this for it to work properly.
The speed boost is gained by skipping checks for the end of the string when in the
middle of properly formatted XML. The only time the check is done is within "values" (
which includes the space after the final closing </xml> )
Also, in the unsafe mode, tags, complete with their attributes, must be on one line.
Node contents of course, can still have carriage returns...
• "$object->read_more( text => "[xml fragment]" )"
Add more XML text to be handled. Note that this function must be called before calling
the parse function.
Example:
Code:
my $ob = XML::Bare->new( text => "
<xml>
<node>a</node>" );
$ob->read_more( text => "<node>b</node>" );
$ob->read_more( text => "</xml>" );
my $root = $ob->parse();
print $ob->xml( $root );
Output:
<xml>
<node>a</node>
<node>b</node>
</xml>
Warning! Reading in additional XML fragments only works properly at proper "division
points". Currently the parser will -not- work properly if you split in the middle of a
node value, or in the middle of a node name. A future version of the module will be
properly updated to handle these cases.
Currently there is little to no benefit to parsing this way, rather than simple
concatenating the two strings together and then reading all the XML in at once.
Functions Used Internally
• "check() checkone() readxbs() free_tree_c()"
• "lineinfo() c_parse() c_parse_unsafely() c_parse_more() c_parsefile() free_tree()
xml2obj()"
• "obj2xml() get_root() obj2html() xml2obj_simple()"
Controversy
Since the creation of this module there has been a fair amount of controvesy surrounding
it. A number of authors of other XML parsers have gone so far as to publicly attack this
module and claim that it 'does not parse XML', and 'it is not XML compliant'. Some of the
same people seem to be angered by the inclusion of a benchmark, claiming that it is an
unfair comparison, and that if the proper options and setup are used, that other XML
parsers are better.
The module should parse any XML document that conforms to the standardized XML
specifications, there is no need for alarm and fear that the module will corrupt your XML
documents on reading.
To be blunt about how the parser works, very little has been done to make the parser
follow the specification known as 'XML'. The parser is meant to be flexibile and somewhat
resilient, and will parse XML like garbage that would cause other parsers to error out.
As far as I am concerned, as the author of the module, the 'XML' in 'XML::Bare' should be
thought of to mean 'eXtremely Mad Language', because the module was written from scratch
without referring to the specification known as 'XML'.
In regard to the complaints about the unfairness of the included benchmarks, please make
your own intelligent decision as to what module you like by trying multiple modules and/or
running the performance tests yourself. If you like some other module, use that module. If
you like XML::Bare and think it is the fastest thing on the planet, that is cool too.
If you hate XML::Bare and want to go around on the internet trashing it and telling people
to use something else, I think perhaps you may want to seek counseling.
Performance
In comparison to other available perl xml parsers that create trees, XML::Bare is
extremely fast. In order to measure the performance of loading and parsing compared to the
alternatives, a templated speed comparison mechanism has been created and included with
XML::Bare.
The include makebench.pl file runs when you make the module and creates perl files within
the bench directory corresponding to the .tmpl contained there.
Currently there are three types of modules that can be tested against, executable parsers
( exe.tmpl ), tree parsers ( tree.tmpl ), and parsers that do not generated trees (
notree.tmpl ).
A full list of modules currently tested against is as follows:
EzXML (exe)
Tiny XML (exe)
XML::Descent (notree)
XML::DOM
XML::Fast
XML::Grove::Builder
XML::Handler::Trees
XMLIO (exe)
XML::LibXML (notree)
XML::LibXML::Simple
XML::Parser (notree)
XML::Parser::EasyTree
XML::Parser::Expat (notree)
XML::SAX::Simple
XML::Simple using XML::Parser
XML::Simple using XML::SAX::PurePerl
XML::Simple using XML::LibXML::SAX::Parser
XML::Simple using XML::Bare::SAX::Parser
XML::Smart
XML::Twig
XML::TreePP
XML::Trivial
XML::XPath::XMLParser
To run the comparisons, run the appropriate perl file within the bench directory. (
exe.pl, tree.pl, or notree.pl )
The script measures the milliseconds of loading and parsing, and compares the time against
the time of XML::Bare. So a 7 means it takes 7 times as long as XML::Bare.
Here is a combined table of the script run against each alternative using the included
test.xml:
-Module- load parse total
XML::Bare 1 1 1
XML::TreePP 2.3063 33.1776 6.1598
XML::Parser::EasyTree 4.9405 25.7278 7.4571
XML::Handler::Trees 7.2303 26.5688 9.6447
XML::Trivial 5.0636 12.4715 7.3046
XML::Smart 6.8138 78.7939 15.8296
XML::Simple (XML::Parser) 2.3346 50.4772 10.7455
XML::Simple (PurePerl) 2.361 261.4571 33.6524
XML::Simple (LibXML) 2.3187 163.7501 23.1816
XML::Simple (XML::Bare) 2.3252 59.1254 10.9163
XML::SAX::Simple 8.7792 170.7313 28.3634
XML::Twig 27.8266 56.4476 31.3594
XML::Grove::Builder 7.1267 26.1672 9.4064
XML::XPath::XMLParser 9.7783 35.5486 13.0002
XML::LibXML (notree) 11.0038 4.5758 10.6881
XML::Parser (notree) 4.4698 17.6448 5.8609
XML::Parser::Expat(notree) 3.7681 50.0382 6.0069
XML::Descent (notree) 6.0525 37.0265 11.0322
Tiny XML (exe) 1.0095
EzXML (exe) 1.1284
XMLIO (exe) 1.0165
Here is a combined table of the script run against each alternative using the included
feed2.xml:
-Module- load parse total
XML::Bare 1 1 1
XML::Bare (simple) 1 0.7238 ?
XML::Bare (unsafe simple) 1 ~0.5538 ?
XML::Fast 1.516 0.9733 1.4783
XML::TreePP 0.6393 30.5951 2.6874
XML::MyXML 1.8266 14.2571 2.7113
XML::Parser::EasyTree 1.5208 22.8283 2.9748
XML::Trivial 2.007 25.742 3.615
XML::Tiny 0.1665 61.4918 4.3234
XML::XPath::XMLParser 2.5762 33.2567 4.6742
XML::Smart 1.702 59.4907 5.7566
XML::Simple (XML::Parser) 0.5838 64.7243 5.0006
XML::DOM::Lite 4.5207 17.4617 5.4033
XML::Simple (LibXML) 0.5904 161.7544 11.5731
XML::Twig 8.553 56.9034 11.8805
XML::Grove::Builder 7.2021 30.7926 12.9334
XML::Handler::Trees 6.8545 33.1007 13.0575
XML::LibXML::Simple 14.0204 11.8482 13.8707
XML::Simple (PurePerl) 0.6176 321.3422 23.0465
XML::Simple 2.7168 90.7203 26.7525
XML::SAX::Simple 8.7386 94.8276 29.2166
XML::LibXML (notree) 11.0023 5.022 10.5214
XML::Parser (notree) 4.3748 25.0213 5.9803
XML::Parser::Expat(notree) 3.6555 51.6426 7.4316
XML::Descent (notree) 5.9206 155.0289 18.7767
Tiny XML (exe) 1.2212
EzXML (exe) 1.3618
XMLIO (exe) 1.0145
These results show that XML::Bare is, at least on the test machine, running all tests
within cygwin, faster at loading and parsing than everything being tested against.
The following things are shown as well:
- XML::Bare can parse XML and create a hash tree
in less time than it takes LibXML just to parse.
- XML::Bare can parse XML and create a tree
in less time than all three binary parsers take
just to parse.
- XML::Fast is theoretically faster at parsing than
the default 'full' mode of XML::Bare. Despite that,
the 'simple' mode of XML::Bare is even faster.
Note that the executable parsers are not perl modules and are timed using dummy programs
that just uses the library to load and parse the example files. The executables are not
included with this program. Any source modifications used to generate the shown test
results can be found in the bench/src directory of the distribution
LICENSE
Copyright (C) 2008 David Helkowski
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version. You may also can
redistribute it and/or modify it under the terms of the Perl
Artistic License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.