Provided by: libxml-xql-perl_0.68-6_all 
NAME
XML::XQL::Tutorial - Describes the XQL query syntax
DESCRIPTION
This document describes basic the features of the XML Query Language (XQL.) A proposal
for the XML Query Language (XQL) specification was submitted to the XSL Working Group in
September 1998. The spec can be found at <http://www.w3.org/TandS/QL/QL98/pp/xql.html>.
Since it is only a proposal at this point, things may change, but it is very likely that
the final version will be close to the proposal. Most of this document was copied
straight from the spec.
See also the XML::XQL man page.
INTRODUCTION
XQL (XML Query Language) provides a natural extension to the XSL pattern language. It
builds upon the capabilities XSL provides for identifying classes of nodes, by adding
Boolean logic, filters, indexing into collections of nodes, and more.
XQL is designed specifically for XML documents. It is a general purpose query language,
providing a single syntax that can be used for queries, addressing, and patterns. XQL is
concise, simple, and powerful.
XQL is designed to be used in many contexts. Although it is a superset of XSL patterns, it
is also applicable to providing links to nodes, for searching repositories, and for many
other applications.
Note that the term XQL is a working term for the language described in this proposal. It
is not their intent that this term be used permanently. Also, beware that another query
language exists called XML-QL, which uses a syntax very similar to SQL.
The XML::XQL module has added functionality to the XQL spec, called XQL+. To allow only
XQL functionality as described in the spec, use the XML::XQL::Strict module. Note that the
XQL spec makes the distinction between core XQL and XQL extensions. This implementation
makes no distinction and the Strict module, therefore, implements everything described in
the XQL spec. See the XML::XQL man page for more information about the Strict module.
This tutorial will clearly indicate when referring to XQL+.
XQL Patterns
This section describes the core XQL notation. These features should be part of every XQL
implementation, and serve as the base level of functionality for its use in different
technologies.
The basic syntax for XQL mimics the URI directory navigation syntax, but instead of
specifying navigation through a physical file structure, the navigation is through
elements in the XML tree.
For example, the following URI means find the foo.jpg file within the bar directory:
bar/foo.jpg
Similarly, in XQL, the following means find the collection of fuz elements within baz
elements:
baz/fuz
Throughout this document you will find numerous samples. They refer to the data shown in
the sample file at the end of this man page.
Context
A context is the set of nodes against which a query operates. For the entire query, which
is passed to the XML::XQL::Query constructor through the Expr option, the context is the
list of input nodes that is passed to the query() method.
XQL allows a query to select between using the current context as the input context and
using the 'root context' as the input context. The 'root context' is a context containing
only the root-most element of the document. When using XML::DOM, this is the Document
object.
By default, a query uses the current context. A query prefixed with '/' (forward slash)
uses the root context. A query may optionally explicitly state that it is using the
current context by using the './' (dot, forward slash) prefix. Both of these notations are
analogous to the notations used to navigate directories in a file system.
The './' prefix is only required in one situation. A query may use the '//' operator to
indicate recursive descent. When this operator appears at the beginning of the query, the
initial '/' causes the recursive decent to perform relative to the root of the document or
repository. The prefix './/' allows a query to perform a recursive descent relative to the
current context.
Examples:
Find all author elements within the current context. Since the period is really not
used alone, this example forward-references other features:
./author
Note that this is equivalent to:
author
Find the root element (bookstore) of this document:
/bookstore
Find all author elements anywhere within the current document:
//author
Find all books where the value of the style attribute on the book is equal to the
value of the specialty attribute of the bookstore element at the root of the document:
book[/bookstore/@specialty = @style]
Query Results
The collection returned by an XQL expression preserves document order, hierarchy, and
identity, to the extent that these are defined. That is, a collection of elements will
always be returned in document order without repeats. Note that the spec states that the
order of attributes within an element is undefined, but that this implementation does keep
attributes in document order. See the XML::XQL man page for more details regarding
Document Order.
Collections - 'element' and '.'
The collection of all elements with a certain tag name is expressed using the tag name
itself. This can be qualified by showing that the elements are selected from the current
context './', but the current context is assumed and often need not be noted explicitly.
Examples:
Find all first-name elements. These examples are equivalent:
./first-name
first-name
Find all unqualified book elements:
book
Find all first.name elements:
first.name
Selecting children and descendants - '/' and '//'
The collection of elements of a certain type can be determined using the path operators
('/' or '//'). These operators take as their arguments a collection (left side) from which
to query elements, and a collection indicating which elements to select (right side). The
child operator ('/')selects from immediate children of the left-side collection, while the
descendant operator ('//') selects from arbitrary descendants of the left-side collection.
In effect, the '//' can be thought of as a substitute for one or more levels of hierarchy.
Note that the path operators change the context as the query is performed. By stringing
them together users can 'drill down' into the document.
Examples:
Find all first-name elements within an author element. Note that the author children
of the current context are found, and then first-name children are found relative to
the context of the author elements:
author/first-name
Find all title elements, one or more levels deep in the bookstore (arbitrary
descendants):
bookstore//title
Note that this is different from the following query, which finds all title elements
that are grandchildren of bookstore elements:
bookstore/*/title
Find emph elements anywhere inside book excerpts, anywhere inside the bookstore:
bookstore//book/excerpt//emph
Find all titles, one or more levels deep in the current context. Note that this
situation is essentially the only one where the period notation is required:
.//title
Collecting element children - '*'
An element can be referenced without using its name by substituting the '*' collection.
The '*' collection returns all elements that are children of the current context,
regardless of their tag name.
Examples:
Find all element children of author elements:
author/*
Find all last-names that are grand-children of books:
book/*/last-name
Find the grandchildren elements of the current context:
*/*
Find all elements with specialty attributes. Note that this example uses subqueries,
which are covered in Filters, and attributes, which are discussed in Finding an
attribute:
*[@specialty]
Finding an attribute - '@'
Attribute names are preceded by the '@' symbol. XQL is designed to treat attributes and
sub-elements impartially, and capabilities are equivalent between the two types wherever
possible.
Note: attributes cannot contain subelements. Thus, attributes cannot have path operators
applied to them in a query. Such expressions will result in a syntax error. The XQL spec
states that attributes are inherently unordered and indices cannot be applied to them, but
this implementation allows it.
Examples:
Find the style attribute of the current element context:
@style
Find the exchange attribute on price elements within the current context:
price/@exchange
The following example is not valid:
price/@exchange/total
Find all books with style attributes. Note that this example uses subqueries, which
are covered in Filters:
book[@style]
Find the style attribute for all book elements:
book/@style
XQL Literals
XQL query expressions may contain literal values (i.e. constants.) Numbers (integers and
floats) are wrapped in XML::XQL::Number objects and strings in XML::XQL::Text objects.
Booleans (as returned by true() and false()) are wrapped in XML::XQL::Boolean objects.
Strings must be enclosed in single or double quotes. Since XQL does not allow escaping of
special characters, it's impossible to create a string with both a single and a double
quote in it. To remedy this, XQL+ has added the q// and qq// string delimiters which
behave just like they do in Perl.
For Numbers, exponential notation is not allowed. Use the XQL+ function eval() to
circumvent this problem. See XML::XQL man page for details.
The empty list or undef is represented by [] (i.e. reference to empty array) in this
implementation.
Example
Integer Numbers:
234
-456
Floating point Numbers:
1.23
-0.99
Strings:
"some text with 'single' quotes"
'text with "double" quotes'
Not allowed:
1.23E-4 (use eval("1.23E-4", "Number") in XQL+)
"can't use \"double \"quotes" (use q/can't use "double" quotes/ in XQL+)
Grouping - '()'
Parentheses can be used to group collection operators for clarity or where the normal
precedence is inadequate to express an operation.
Filters - '[]'
Constraints and branching can be applied to any collection by adding a filter clause '[ ]'
to the collection. The filter is analogous to the SQL WHERE clause with ANY semantics. The
filter contains a query within it, called the subquery. The subquery evaluates to a
Boolean, and is tested for each element in the collection. Any elements in the collection
failing the subquery test are omitted from the result collection.
For convenience, if a collection is placed within the filter, a Boolean TRUE is generated
if the collection contains any members, and a FALSE is generated if the collection is
empty. In essence, an expression such as author/degree implies a collection-to-Boolean
conversion function like the following mythical 'there-exists-a' method.
author[.there-exists-a(degree)]
Note that any number of filters can appear at a given level of an expression. Empty
filters are not allowed.
Examples:
Find all books that contain at least one excerpt element:
book[excerpt]
Find all titles of books that contain at least one excerpt element:
book[excerpt]/title
Find all authors of books where the book contains at least one excerpt, and the author
has at least one degree:
book[excerpt]/author[degree]
Find all books that have authors with at least one degree:
book[author/degree]
Find all books that have an excerpt and a title:
book[excerpt][title]
Any and all semantics - '$any$' and '$all$'
Users can explicitly indicate whether to use any or all semantics through the $any$ and
$all$ keywords.
$any$ flags that a condition will hold true if any item in a set meets that condition.
$all$ means that all elements in a set must meet the condition for the condition to hold
true.
$any$ and $all$ are keywords that appear before a subquery expression within a filter.
Examples:
Find all author elements where one of the last names is Bob:
author[last-name = 'Bob']
author[$any$ last-name = 'Bob']
Find all author elements where none of the last-name elements are Bob:
author[$all$ last-name != 'Bob']
Find all author elements where the first last name is Bob:
author[last-name[0] = 'Bob']
Indexing into a collection - '[]' and '$to$'
XQL makes it easy to find a specific node within a set of nodes. Simply enclose the index
ordinal within square brackets. The ordinal is 0 based.
A range of elements can be returned. To do so, specify an expression rather than a single
value inside of the subscript operator (square brackets). Such expressions can be a comma
separated list of any of the following:
n Returns the nth element
-n Returns the element that is n-1 units from the last element.
E.g., -1 means the last element. -2 is the next to last element.
m $to$ n Returns elements m through n, inclusive
Examples:
Find the first author element:
author[0]
Find the third author element that has a first-name:
author[first-name][2]
Note that indices are relative to the parent. In other words, consider the following
data:
<x>
<y/>
<y/>
</x>
<x>
<y/>
<y/>
</x>
The following expression will return the first y from each of the x's:
x/y[0]
The following will return the first y from the entire set of y's within x's:
(x/y)[0]
The following will return the first y from the first x:
x[0]/y[0]
Find the first and fourth author elements:
author[0,3]
Find the first through fourth author elements:
author[0 $to$ 3]
Find the first, the third through fifth, and the last author elements:
author[0, 2 $to$ 4, -1]
Find the last author element:
author[-1]
Boolean Expressions
Boolean expressions can be used within subqueries. For example, one could use Boolean
expressions to find all nodes of a particular value, or all nodes with nodes in particular
ranges. Boolean expressions are of the form ${op}$, where {op} may be any expression of
the form {b|a} - that is, the operator takes lvalue and rvalue arguments and returns a
Boolean result.
Note that the XQL Extensions section defines additional Boolean operations.
Boolean AND and OR - '$and$' and '$or$'
$and$ and $or$ are used to perform Boolean ands and ors.
The Boolean operators, in conjunction with grouping parentheses, can be used to build very
sophisticated logical expressions.
Note that spaces are not significant and can be omitted, or included for clarity as shown
here.
Examples:
Find all author elements that contain at least one degree and one award.
author[degree $and$ award]
Find all author elements that contain at least one degree or award and at least one
publication.
author[(degree $or$ award) $and$ publication]
Boolean NOT - '$not$'
$not$ is a Boolean operator that negates the value of an expression within a subquery.
Examples:
Find all author elements that contain at least one degree element and that contain no
publication elements.
author[degree $and$ $not$ publication]
Find all author elements that contain publications elements but do not contain either
degree elements or award elements.
author[$not$ (degree $or$ award) $and$ publication]
Union and intersection - '$union$', '|' and '$intersect$'
The $union$ operator (shortcut is '|') returns the combined set of values from the query
on the left and the query on the right. Duplicates are filtered out. The resulting list
is sorted in document order.
Note: because this is a union, the set returned may include 0 or more elements of each
element type in the list. To restrict the returned set to nodes that contain at least one
of each of the elements in the list, use a filter, as discussed in Filters.
The $intersect$ operator returns the set of elements in common between two sets.
Examples:
Find all first-names and last-names:
first-name $union$ last-name
Find all books and magazines from a bookstore:
bookstore/(book | magazine)
Find all books and all authors:
book $union$ book/author
Find the first-names, last-names, or degrees from authors within either books or
magazines:
(book $union$ magazine)/author/(first-name $union$ last-name $union$ degree)
Find all books with author/first-name equal to 'Bob' and all magazines with price less
than 10:
book[author/first-name = 'Bob'] $union$ magazine[price $lt$ 10]
Equivalence - '$eq$', '=', '$ne$' and '!='
The '=' sign is used for equality; '!=' for inequality. Alternatively, $eq$ and
$ne$ can be used for equality and inequality.
Single or double quotes can be used for string delimiters in expressions. This makes it
easier to construct and pass XQL from within scripting languages.
For comparing values of elements, the value() method is implied. That is, last-name <
'foo' really means last-name!value() < 'foo'.
Note that filters are always with respect to a context. That is, the expression
book[author] means for every book element that is found, see if it has an author
subelement. Likewise, book[author = 'Bob'] means for every book element that is found, see
if it has a subelement named author whose value is 'Bob'. One can examine the value of the
context as well, by using the . (period). For example, book[. = 'Trenton'] means for every
book that is found, see if its value is 'Trenton'.
Examples:
Find all author elements whose last name is Bob:
author[last-name = 'Bob']
author[last-name $eq$ 'Bob']
Find all authors where the from attribute is not equal to 'Harvard':
degree[@from != 'Harvard']
degree[@from $ne$ 'Harvard']
Find all authors where the last-name is the same as the /guest/last-name element:
author[last-name = /guest/last-name]
Find all authors whose text is 'Matthew Bob':
author[. = 'Matthew Bob']
author = 'Matthew Bob'
Comparison - '<', '<=', '>', '>=', '$lt', '$ilt$' etc.
A set of binary comparison operators is available for comparing numbers and strings and
returning Boolean results. $lt$, $le$, $gt$, $ge$ are used for less than, less than or
equal, greater than, or greater than or equal. These same operators are also available in
a case insensitive form: $ieq$, $ine$, $ilt$, $ile$, $igt$, $ige$.
<, <=, > and >= are allowed short cuts for $lt$, $le$, $gt$ and $ge$.
Examples:
Find all author elements whose last name is bob and whose price is > 50
author[last-name = 'Bob' $and$ price $gt$ 50]
Find all authors where the from attribute is not equal to 'Harvard':
degree[@from != 'Harvard']
Find all authors whose last name begins with 'M' or greater:
author[last-name $ge$ 'M']
Find all authors whose last name begins with 'M', 'm' or greater:
author[last-name $ige$ 'M']
Find the first three books:
book[index() $le$ 2]
Find all authors who have more than 10 publications:
author[publications!count() $gt$ 10]
XQL+ Match operators - '$match$', '$no_match$', '=~' and '!~'
XQL+ defines additional operators for pattern matching. The $match$ operator (shortcut is
'=~') returns TRUE if the lvalue matches the pattern described by the rvalue. The
$no_match$ operator (shortcut is '!~') returns FALSE if they match. Both lvalue and rvalue
are first cast to strings.
The rvalue string should have the syntax of a Perl rvalue, that is the delimiters should
be included and modifiers are allowed. When using delimiters other than slashes '/', the
'm' should be included. The rvalue should be a string, so don't forget the quotes! (Or use
the q// or qq// delimiters in XQL+, see XML::XQL man page.)
Note that you can't use the Perl substitution operator s/// here. Try using the XQL+
subst() function instead.
Examples:
Find all authors whose name contains bob or Bob:
author[first-name =~ '/[Bb]ob/']
Find all book titles that don't contain 'Trenton' (case-insensitive):
book[title !~ 'm!trenton!i']
Oher XQL+ comparison operators - '$isa', '$can$'
See the XML::XQL man page for other operators available in XQL+.
Comparisons and vectors
The lvalue of a comparison can be a vector or a scalar. The rvalue of a comparison must be
a scalar or a value that can be cast at runtime to a scalar.
If the lvalue of a comparison is a set, then any (exists) semantics are used for the
comparison operators. That is, the result of a comparison is true if any item in the set
meets the condition.
Comparisons and literals
The spec states that the lvalue of an expression cannot be a literal. That is, '1' = a is
not allowed. This implementation allows it, but it's not clear how useful that is.
Casting of literals during comparison
Elements, attributes and other XML node types are casted to strings (Text) by applying the
value() method. The value() method calls the text() method by default, but this behavior
can be altered by the user, so the value() method may return other XQL data types.
When two values are compared, they are first casted to the same type. See the XML::XQL
man page for details on casting.
Note that the XQL spec is not very clear on how values should be casted for comparison.
Discussions with the authors of the XQL spec revealed that there was some disagreement and
their implementations differed on this point. This implementation is closest to that of
Joe Lapp from webMethods, Inc.
Methods - 'method()' or 'query!method()'
XQL makes a distinction between functions and methods. See the XML::XQL man page for
details.
XQL provides methods for advanced manipulation of collections. These methods provide
specialized collections of nodes (see Collection methods), as well as information about
sets and nodes.
Methods are of the form method(arglist)
Consider the query book[author]. It will find all books that have authors. Formally, we
call the book corresponding to a particular author the reference node for that author.
That is, every author element that is examined is an author for one of the book elements.
(See the Annotated XQL BNF Appendix for a much more thorough definition of reference node
and other terms. See also the XML::XQL man page.) Methods always apply to the reference
node.
For example, the text() method returns the text contained within a node, minus any
structure. (That is, it is the concatenation of all text nodes contained with an element
and its descendants.) The following expression will return all authors named 'Bob':
author[text() = 'Bob']
The following will return all authors containing a first-name child whose text is 'Bob':
author[first-name!text() = 'Bob']
The following will return all authors containing a child named Bob:
author[*!text() = 'Bob']
Method names are case sensitive. See the XML::XQL man page on how to define your own
methods and functions.
Information methods
The following methods provide information about nodes in a collection. These methods
return strings or numbers, and may be used in conjunction with comparison operators within
subqueries.
Method: text()
The text() method concatenates text of the descendents of a node, normalizing white
space along the way. White space will be preserved for a node if the node has the
xml:space attribute set to 'preserve', or if the nearest ancestor with the xml:space
attribute has the attribute set to 'preserve'. When white space is normalized, it is
normalized across the entire string. Spaces are used to separate the text between
nodes. When entity references are used in a document, spacing is not inserted around
the entity refs when they are expanded.
In this implementation, the method may receive an optional parameter to indicate
whether the text() of Element nodes should include the text() of its Element
descendants. See XML::XQL man page for details.
Examples:
Find the authors whose last name is 'Bob':
author[last-name!text() = 'Bob']
Note this is equivalent to:
author[last-name = 'Bob']
Find the authors with value 'Matthew Bob':
author[text() = 'Matthew Bob']
author[. = 'Matthew Bob']
author = 'Matthew Bob'
Method: rawText()
The rawText() method is similar to the text() method, but it does not normalize
whitespace.
In this implementation, the method may receive an optional parameter to indicate
whether the rawText() of Element nodes should include the rawText() of its Element
descendants. See XML::XQL man page for details.
Method: value()
Returns a type cast version of the value of a node. If no data type is provided,
returns the same as text().
Shortcuts
For the purposes of comparison, value( )is implied if omitted. In other words,
when two items are compared, the comparison is between the value of the two items.
Remember that in absence of type information, value() returns text().
The following examples are equivalent:
author[last-name!value() = 'Bob' $and$ first-name!value() = 'Joe']
author[last-name = 'Bob' $and$ first-name = 'Joe']
price[@intl!value() = 'canada']
price[@intl = 'canada']
Method: nodeType()
Returns a number to indicate the type of the node. The values were based on the node
type values in the DOM:
element 1
attribute 2
text 3
entity 6 (not in XQL spec)
PI 7
comment 8
document 9
doc. fragment 10 (not in XQL spec)
notation 11 (not in XQL spec)
Note that in XQL, CDATASection nodes and EntityReference nodes also return 3, whereas
in the DOM CDATASection returns 4 and EntityReference returns 5. Use the XQL+ method
DOM_nodeType() to get DOM node type values. See the XML::DOM man page for node type
values of nodes not mentioned here.
Method: nodeTypeString
Returns the name of the node type in lowercase or an empty string. The following node
types are currently supported 1 (element), 2 (attribute), 3 (text), 7
(processing_instruction), 8 (comment), 9 (document)
Method: nodeName()
Returns the tag name for Element nodes and the attribute name of attributes.
Collection index methods
Method: index()
Returns the index of the value within the search context (i.e. with the input list of
the subquery.) This is not necessarily the same as the index of a node within its
parent node. Note that the XQL spec doesn't explain it well.
Examples:
Find the first 3 degrees:
degree[index() $lt$ 3]
Note that it skips over other nodes that may exist between the degree elements.
Consider the following data:
<x>
<y/>
<y/>
</x>
<x>
<y/>
<y/>
</x>
The following expression will return the first y from each x:
x/y[index() = 0]
This could also be accomplished by (see Indexing into a Collection):
x/y[0]
Method: end()
The end() method returns true for the last element in the search context. Again, the
XQL spec does not explain it well.
Examples:
Find the last book:
book[end()]
Find the last author for each book:
book/author[end()]
Find the last author from the entire set of authors of books:
(book/author)[end()]
Aggregate methods
Method: count( [QUERY] )
Returns the number of values inside the search context. In XQL+, when the optional
QUERY parameter is supplied, it returns the number of values returned by the QUERY.
Namespace methods
The following methods can be applied to a node to return namespace information.
Method: baseName()
Returns the local name portion of the node, excluding the prefix. Local names are
defined only for element nodes and attribute nodes. The local name of an element node
is the local portion of the node's element type name. The local name of an attribute
node is the local portion of the node's attribute name. If a local name is not defined
for the reference node, the method evaluates to the empty set.
Method: namespace()
Returns the URI for the namespace of the node. Namespace URIs are defined only for
element nodes and attribute nodes. The namespace URI of an element node is the
namespace URI associated with the node's element type name. The namespace URI of an
attribute node is the namespace URI associated with the node's attribute name. If a
namespace URI is not defined for the reference node, the method evaluates to the empty
set.
Method: prefix()
Returns the prefix for the node. Namespace prefixes are defined only for element nodes
and attribute nodes. The namespace prefix of an element node is the shortname for the
namespace of the node's element type name. The namespace prefix of an attribute node
is the shortname for the namespace of the node's attribute name. If a namespace
prefix is not defined for the reference node, the method evaluates to the empty set.
The spec states: A node's namespace prefix may be defined within the query expression,
within the document under query, or within both the query expression and the document
under query. If it is defined in both places the prefixes may not agree. In this case,
the prefix assigned by the query expression takes precedence. In this implementation
you cannot define the namespace for a query, so this can never happen.
Examples:
Find all unqualified book elements. Note that this does not return my:book
elements:
book
Find all book elements with the prefix 'my'. Note that this query does not return
unqualified book elements:
my:book
Find all book elements with a 'my' prefix that have an author subelement:
my:book[author]
Find all book elements with a 'my' prefix that have an author subelement with a my
prefix:
my:book[my:author]
Find all elements with a prefix of 'my':
my:*
Find all book elements from any namespace:
*:book
Find any element from any namespace:
*
Find the style attribute with a 'my' prefix within a book element:
book/@my:style
All attributes of an element can be returned using @*. This is potentially useful for
applications that treat attributes as fields in a record.
Examples:
Find all attributes of the current element context:
@*
Find style attributes from any namespace:
@*:style
Find all attributes from the 'my' namespace, including unqualified attributes on
elements from the 'my' namespace:
@my:*
Functions
This section defines the functions of XQL. The spec states that: XQL defines two kinds of
functions: collection functions and pure functions. Collection functions use the search
context of the Invocation instance, while pure functions ignore the search context, except
to evaluate the function's parameters. A collection function evaluates to a subset of the
search context, and a pure function evaluates to either a constant value or to a value
that depends only on the function's parameters.
Don't worry if you don't get it. Just use them!
Collection functions
The collection functions provide access to the various types of nodes in a document. Any
of these collections can be constrained and indexed. The collections return the set of
children of the reference node meeting the particular restriction.
Function: textNode()
The collection of text nodes.
Function: comment()
The collection of comment nodes.
Function: pi()
The collection of processing instruction nodes.
Function: element( [NAME] )
The collection of all element nodes. If the optional text parameter is provided, it
only returns element children matching that particular name.
Function: attribute( [NAME] )
The collection of all attribute nodes. If the optional text parameter is provided, it
only returns attributes matching that particular name.
Function: node()
The collection of all non-attribute nodes.
Examples:
Find the second text node in each p element in the current context:
p/textNode()[1]
Find the second comment anywhere in the document. See Context for details on
setting the context to the document root:
//comment()[1]
Other XQL Functions
Function: ancestor(QUERY)
Finds the nearest ancestor matching the provided query. It returns either a single
element result or an empty set []. Note that this node is never the reference node
itself.
Examples:
Find the nearest book ancestor of the current element:
ancestor(book)
Find the nearest ancestor author element that is contained in a book element:
ancestor(book/author)
Function: id(NAME)
Pure function that evaluates to a set. The set contains an element node that has an
'id' attribute whose value is identical to the string that the Text parameter quotes.
The element node may appear anywhere within the document under query. If more than one
element node meets these criteria, the function evaluates to a set that contains the
first node appearing in a document ordering of the nodes.
Function: true() and false()
Pure functions that each evaluate to a Boolean. "true()" evaluates to 'true', and
"false()" evaluates to 'false'. These functions are useful in expressions that are
constructed using entity references or variable substitution, since they may replace
an expression found in an instance of Subquery without violating the syntax required
by the instance of Subquery. They return an object of type XML::XQL::Boolean.
Function: date(QUERY)
"date" is a pure function that typecasts the value of its parameter to a set of dates.
If the parameter matches a single string, the value of the function is a set
containing a single date. If the parameter matches a QUERY, the value of the function
is a set of dates, where the set contains one date for each member of the set to which
the parameter evaluates.
XQL does not define the representation of the date value, nor does it define how the
function translates parameter values into dates. This implementation uses the
Date::Manip module to parse dates, which accepts almost any imaginable format. See
XML::XQL to plug in your own Date implementation.
Include the XML::XQL::Date package to add the XQL date type and the date() function,
like this:
use XML::XQL::Date;
Perl builtin functions and other XQL+ functions
XQL+ provides XQL function wrappers for most Perl builtin functions. It also provides
other cool functions like subst(), map(), and eval() that allow you to modify
documents and embed perl code. If this is still not enough, you can add your own
function and methods. See XML::XQL man page for details.
Sequence Operators - ';' and ';;'
The whitepaper 'The Design of XQL' by Jonathan Robie, which can be found at
<http://www.texcel.no/whitepapers/xql-design.html> describes the sequence operators ';;'
(precedes) and ';' (immediately precedes.) Although these operators are not included in
the XQL spec, I thought I'd add them anyway.
Immediately Precedes - ';'
Example:
With the following input:
<TABLE>
<ROWS>
<TR>
<TD>Shady Grove</TD>
<TD>Aeolian</TD>
</TR>
<TR>
<TD>Over the River, Charlie</TD>
<TD>Dorian</TD>
</TR>
</ROWS>
</TABLE>
Find the TD node that contains "Shady Grove" and the TD node that immediately follows
it:
//(TD="Shady Grove" ; TD)
Note that in XML::DOM there is actually a text node with whitespace between the two TD
nodes, but those are ignored by this operator, unless the text node has 'xml:space' set to
'preserve'. See ??? for details.
Precedes - ';;'
Example:
With the following input (from Hamlet):
<SPEECH>
<SPEAKER>MARCELLUS</SPEAKER>
<LINE>Tis gone!</LINE>
<STAGEDIR>Exit Ghost</STAGEDIR>
<LINE>We do it wrong, being so majestical,</LINE>
<LINE>To offer it the show of violence;</LINE>
<LINE>For it is, as the air, invulnerable,</LINE>
<LINE>And our vain blows malicious mockery.</LINE>
</SPEECH>
Return the STAGEDIR and all the LINEs that follow it:
SPEECH//( STAGEDIR ;; LINE )
Suppose an actor playing the ghost wants to know when to exit; that is, he wants to
know who says what line just before he is supposed to exit. The line immediately
precedes the stagedir, but the speaker may occur at any time before the line. In this
query, we will use the "precedes" operator (";;") to identify a speaker that precedes
the line somewhere within a speech. Our ghost can find the required information with
the following query, which selects the speaker, the line, and the stagedir:
SPEECH//( SPEAKER ;; LINE ; STAGEDIR="Exit Ghost")
Operator Precedence
The following table lists operators in precedence order, highest precedence first, where
operators of a given row have the same precedence. The table also lists the associated
productions:
Production Operator(s)
---------- -----------
Grouping ( )
Filter [ ]
Subscript [ ]
Bang !
Path / //
Match $match$ $no_match$ =~ !~ (XQL+ only)
Comparison = != < <= > >= $eq$ $ne$ $lt$ $le$ $gt$
$ge$ $ieq$ $ine$ $ilt$ $ile$ $igt$ $ige$
Intersection $intersect$
Union $union$ |
Negation $not$
Conjunction $and$
Disjunction $or$
Sequence ; ;;
Sample XML Document - bookstore.xml
This file is also stored in samples/bookstore.xml that comes with the XML::XQL
distribution.
<?xml version='1.0'?>
<!-- This file represents a fragment of a book store inventory database -->
<bookstore specialty='novel'>
<book style='autobiography'>
<title>Seven Years in Trenton</title>
<author>
<first-name>Joe</first-name>
<last-name>Bob</last-name>
<award>Trenton Literary Review Honorable Mention</award>
</author>
<price>12</price>
</book>
<book style='textbook'>
<title>History of Trenton</title>
<author>
<first-name>Mary</first-name>
<last-name>Bob</last-name>
<publication>
Selected Short Stories of
<first-name>Mary</first-name> <last-name>Bob</last-name>
</publication>
</author>
<price>55</price>
</book>
<magazine style='glossy' frequency='monthly'>
<title>Tracking Trenton</title>
<price>2.50</price>
<subscription price='24' per='year'/>
</magazine>
<book style='novel' id='myfave'>
<title>Trenton Today, Trenton Tomorrow</title>
<author>
<first-name>Toni</first-name>
<last-name>Bob</last-name>
<degree from='Trenton U'>B.A.</degree>
<degree from='Harvard'>Ph.D.</degree>
<award>Pulizer</award>
<publication>Still in Trenton</publication>
<publication>Trenton Forever</publication>
</author>
<price intl='canada' exchange='0.7'>6.50</price>
<excerpt>
<p>It was a dark and stormy night.</p>
<p>But then all nights in Trenton seem dark and
stormy to someone who has gone through what
<emph>I</emph> have.</p>
<definition-list>
<term>Trenton</term>
<definition>misery</definition>
</definition-list>
</excerpt>
</book>
<my:book style='leather' price='29.50' xmlns:my='http://www.placeholder-name-here.com/schema/'>
<my:title>Who's Who in Trenton</my:title>
<my:author>Robert Bob</my:author>
</my:book>
</bookstore>
SEE ALSO
The Japanese version of this document can be found on-line at
<http://member.nifty.ne.jp/hippo2000/perltips/xml/xql/tutorial.htm>
XML::XQL, XML::XQL::Date, XML::XQL::Query and XML::XQL::DOM