Provided by: blt-dev_2.5.3+dfsg-3_amd64 bug

NAME

       tabset - Create and manipulate tabset widgets
_________________________________________________________________

SYNOPSIS

       tabset pathName ?options?

DESCRIPTION

       The  tabset  widget  displays  a  series  of overlapping folders. Only the contents of one
       folder at a time is displayed.  By clicking on the tab's of a folder, you can  view  other
       folders.   Each  folder may contain any Tk widget that can be automatically positioned and
       resized in the folder.

       There's no limit to the number of folders.  Tabs can be tiered or scrolled.   Pages  (i.e.
       embedded  widgets)  can  be  torn  off  and displayed in another toplevel widget, and also
       restored.  A tabset can also be used as just a set  of  tabs,  without  a  displaying  any
       pages.  You can bind events to individual tabs, so it's easy to add features like "balloon
       help".

INTRODUCTION

       Notebooks are a popular graphical paradigm.  They allow you to  organize  several  windows
       that  are  too  big to display at the same time as pages of a notebook.  For example, your
       application may display several X-Y graphs at the same time.  The graphs are  too  big  to
       pack  into  the  same frame.  Managing them in several toplevel widgets is also cumbersome
       and clutters the screen.  Instead, the tabset widget organizes the graphs as folders in  a
       notebook.

       Only  one  page is visible at a time. When you click on a tab, the folder corresponding to
       the tab is displayed in the  tabset widget.  The tabset also  lets  you  temporarily  tear
       pages out of the notebook into a separate toplevel widget, and put them back in the tabset
       later.  For example, you could compare two graphs side-by-side by tearing  them  out,  and
       then replace them when you are finished.

       A  tabset  can contain any number of folders.  If there are too many tabs to view, you can
       arrange them as multiple tiers or scroll the tabs. You can also attach  Tk  scrollbars  to
       the tabset to scroll the tabs.

SYNTAX

       The  tabset  command  creates a new window using the pathName argument and makes it into a
       tabset widget.  tabset pathName ?option value?...  Additional options may be specified  on
       the  command line or in the option database to configure aspects of the tabset such as its
       colors, font, text, and relief.  The tabset command returns its pathName argument.  At the
       time this command is invoked, there must not exist a window named pathName, but pathName's
       parent must exist.

       When first created, a new tabset contains no tabs.  Tabs are added or deleted using widget
       operations  described  below.  It is not necessary for all the tabs to be displayed in the
       tabset window at once; commands described below may be used to  change  the  view  in  the
       window.   Tabsets  allow  scrolling  of  tabs  using the -scrollcommand option.  They also
       support scanning (see the scan operation).  Tabs may be arranged along  any  side  of  the
       tabset window using the -side option.

       The  size  of the tabset window is determined the number of tiers of tabs and the sizes of
       the Tk widgets embedded inside each folder.  The widest widget determines the width of the
       folder.  The tallest determines the height.  If no folders contain an embedded widget, the
       size is determined solely by the size of the tabs.

       You can override either dimension with the tabset's -width and -height options.

INDICES

       Indices refer to individual tabs/folders in the tabset.  Many of the operations for tabset
       widgets take one or more indices as arguments.  An index may take several forms:

       number      Unique index offset of the tab.

       @x,y        Tab that covers the point in the tabset window specified by x and y (in screen
                   coordinates).  If no tab covers that point, then the index is ignored.

       select      The currently selected tab.  The select index is typically changed  by  either
                   clicking  on  the  tab with the left mouse button or using the widget's invoke
                   operation.

       active      The tab where the mouse pointer is currently  located.   The  label  is  drawn
                   using  its  active  colors  (see  the  -activebackground and -activeforeground
                   options).  The active index is typically changed by moving the  mouse  pointer
                   over  a  tab  or  using the widget's activate operation. There can be only one
                   active tab at a time.  If there is no tab located under the mouse pointer, the
                   index is ignored.

       begin       First tab in the tabset.  If there are no tabs in the tabset then the index is
                   ignored.

       current     Tab that is currently being operated upon.  Used within bindings.

       focus       Tab that currently has the widget's focus.   This  tab  is  displayed  with  a
                   dashed  line around its label.  You can change this using the focus operation.
                   If no tab has focus, then the index is ignored.

       down        Tab immediately below the tab that currently has focus, if there  is  one.  If
                   there is no tab below, the current tab is returned.

       left        Tab immediately to the left the tab that currently has focus, if there is one.
                   If there is no tab to the left, the current tab is returned.

       next        The next tab.  Wraps to the first tab if at end.

       prev        The previous tab.  Wraps to the last tab if at start.

       right       Tab immediately to the right the tab that currently has  focus,  if  there  is
                   one. If there is no tab to the right, the current tab is returned.

       up          Tab  immediately  above, if there is one, to the tab that currently has focus.
                   If there is no tab above, the current tab is returned.

       end         Last tab in the tabset.  If there are no tabs in the tabset then the index  is
                   ignored.

       Some  indices may not always be available.  For example, if the mouse is not over any tab,
       "active" does not have an index.  For most tabset operations this is harmless and ignored.

OPERATIONS

       All tabset operations are invoked by specifying the widget's pathname, the operation,  and
       any arguments that pertain to that operation.  The general form is:

            pathName operation ?arg arg ...?

       Operation  and  the  args  determine  the  exact  behavior  of the command.  The following
       operations are available for tabset widgets:

       pathName activate index
              Sets the active tab to the one indicated by index.  The active tab  is  drawn  with
              its active colors (see the -activebackground and -activeforeground options) and may
              be retrieved with the index active.  Only one tab may be  active  at  a  time.   If
              index is the empty string, then all tabs will be drawn with their normal foreground
              and background colors.

       pathName bind tagName ?sequence? ?command?
              Associates command with tagName such that whenever  the  event  sequence  given  by
              sequence  occurs  for  a tab with this tag, command will be invoked.  The syntax is
              similar to the bind command except that it operates on tabs, rather  than  widgets.
              The  tagName is one of all, Perforation, Image, Leftimage, Startimage, Endimage, or
              the name label used to create a Tab.   See  the  bind  manual  entry  for  complete
              details on sequence and the substitutions performed on command.

              If  all  arguments  are  specified  then  a  new  binding is created, replacing any
              existing binding for the same sequence and tagName.   If  the  first  character  of
              command  is  +  then command augments an existing binding rather than replacing it.
              If no command argument is provided  then  the  command  currently  associated  with
              tagName and sequence (it's an error occurs if there's no such binding) is returned.
              If both command and sequence are missing then a list of all the event sequences for
              which bindings have been defined for tagName.

       pathName cget option
              Returns  the current value of the configuration option given by option.  Option may
              have any of the values accepted by the configure operation described in the section
              WIDGET OPTIONS below.

       pathName configure ?option? ?value option value ...?
              Query  or  modify  the  configuration  options  of  the  widget.   If  no option is
              specified, returns a list describing all the available options  for  pathName  (see
              Tk_ConfigureInfo  for  information  on  the  format  of  this  list).  If option is
              specified with no value, then the command returns a list describing the  one  named
              option  (this  list  will  be  identical  to the corresponding sublist of the value
              returned if no option is  specified).   If  one  or  more  option-value  pairs  are
              specified,  then  the command modifies the given widget option(s) to have the given
              value(s);  in this case the command returns an empty string.  Option and value  are
              described in the section WIDGET OPTIONS below.

       pathName coords element ?index?
              Returns the screen coordinates for the given element, which is one of: text, image,
              leftimage,  startimage,  endimage,  or  perforation.   All  except  startimage  and
              endimage must also provide a tab index.

       pathName delete first ?last?
              Deletes  one  or  more tabs from the tabset.  First and last are the first and last
              indices, defining a range of tabs to be deleted.  If  last  isn't  specified,  then
              only the tab at first is deleted.

       pathName focus index
              Designates  a  tab  to get the widget's focus.  This tab is displayed with a dashed
              line around its label.

       pathName get index
              Returns the name of the tab.  The value of index may be in any  form  described  in
              the section INDICES .

       pathName hightlight index
              Highlight a tab.

       pathName index ?flag? string
              Returns  the  index  offset of the tab specified by string.  If flag is -name, then
              string is the name of a tab.  If flag  is  -index,  string  is  an  index  such  as
              "active" or "focus".  If flag is -both, string is either.  If flag isn't specified,
              it defaults to -index.

       pathName insert position ?name ...? ?option value?...
              Inserts new tabs into the tabset.  Tabs are inserted just before the tab  given  by
              position.   Position  may  be either a number, indicating where in the list the new
              tab should be added, or end, indicating that the new tab is to be added the end  of
              the  list.   Name  is the symbolic name of the tab. Be careful not to use a number.
              Otherwise the tabset will confuse it with tab indices.  Returns a list  of  indices
              for  all  the  new  tabs.   If tab name is an empty string, or ends in #auto, it is
              generated using the given prefix.  The list of created tab names is returned.

       pathName invoke index
              Selects the tab given by index, maps the tab's embedded widget, and invokes the Tcl
              command  associated  with  the  tab,  if   there  is  one.  The return value is the
              return value from the Tcl command, or an empty string  if there   is   no   command
              associated  with  the  tab.   This  command is ignored if the  tab's state (see the
              -state option) is disabled.

       pathName move index before|after index
              Moves the tab index to a new position in the tabset.

       pathName nearest x y ?varName? ?coordsVar?
              Returns the name of the tab  nearest  to  given  X-Y  screen  coordinate.   If  the
              argument  varName  is  present,  this is a Tcl variable that is set to either text,
              image, leftimage, startimage, endimage, perforation or the empty  string  depending
              what part of the tab the coordinate is over.  If the argument coordsVar is present,
              return the bounding box coordinates  coordinates  for  the  matching  item  set  in
              varName.

       pathName perforation operation ?args?
              This operation controls the perforation on the tab label.

              pathName perforation activate boolean
                     Set perforation active state to on or off.

              pathName perforation invoke
                     Invokes  the command specified for perforations (see the -perforationcommand
                     widget option). Typically this command places the  page  into  a  top  level
                     widget.  The name of the toplevel is the concatonation of the pathName, "-",
                     and the tabName.  The return value is the return value from the Tcl command,
                     or  an  empty  string   if  there  is  no  command  associated with the tab.
                     This command is ignored if the  tab's  state  (see  the  -state  option)  is
                     disabled.

       pathName scan option args
              This  command  implements  scanning  on  tabsets.   It  has two forms, depending on
              option:

              pathName scan mark x y
                     Records x and y and the current view in the tabset window;  used with  later
                     scan  dragto  commands.   Typically  this command is associated with a mouse
                     button press in the widget.  It returns an empty string.

              pathName scan dragto x y.
                     This command computes the difference between its x and y arguments and the x
                     and  y  arguments  to  the  last  scan mark command for the widget.  It then
                     adjusts the view by 10 times the difference in coordinates.  This command is
                     typically  associated with mouse motion events in the widget, to produce the
                     effect of dragging the list at high speed through the  window.   The  return
                     value is an empty string.

       pathName see index
              Scrolls the tabset so that the tab index is visible in the widget's window.

       pathName select index
              Select the tab.

       pathName size
              Returns the number of tabs in the tabset.

       pathName tab operation ?args?

              pathName tab cget nameOrIndex option
                     Returns  the  current  value  of  the  configuration option given by option.
                     Option may have any of the values accepted by the  tab  configure  operation
                     described in the section TAB OPTIONS below.

              pathName  tab  configure  nameOrIndex  ?nameOrIndex...? option? ?value option value
              ...?
                     Query or modify the configuration options of one or more tabs.  If no option
                     is  specified,  this  operation  returns a list describing all the available
                     options for nameOrIndex.  NameOrIndex can be either the name of a tab or its
                     index.   Names of tabs take precedence over their indices.  That means a tab
                     named focus is picked over the "focus" tab.

                     If option is specified, but not value, then a list describing the one  named
                     option  is returned.  If  one or more option-value pairs are specified, then
                     each named tab (specified  by  nameOrIndex)  will  have  its  configurations
                     option(s)  set  the  given value(s).  In this last case, the empty string is
                     returned.  Option and value are described in the section TAB OPTIONS below.

              pathName tab dockall
                     Dock all tearoffs.

              pathName tab names ?pattern?
                     Returns the names of all the tabs matching the given pattern. If no  pattern
                     argument is provided, then all tab names are returned.

              pathName tab pageheight

              pathName tab pagewidth

              pathName tab select nameOrindex
                     Select  a  tab  by  name or index, and cause it to become visible, selected,
                     activated, and receive focus.   This  is  a  shortform  for  using  separate
                     commands.

              pathName tab tearoff ?index?
                     With  no  ?index?, returns list of all torn-off tabs.  Otherwise, return the
                     window for the given torn-off tab.

       pathName tab tearoff ?index?
              With no  ?index?, returns list of all torn-off tabs.  Otherwise, toggles the  torn-
              off state of the tab.

       pathName view args
              This  command queries or changes the position of the tabset in the widget's window.
              It can take any of the following forms:

              pathName view
                     Returns a list of two numbers between 0.0 and 1.0 that describe  the  amount
                     and  position  of the tabset that is visible in the window.  For example, if
                     view is "0.2 0.6", 20% of the tabset's text is off-screen to the  left,  40%
                     is  visible in the window, and 40% of the tabset is off-screen to the right.
                     These are the same  values  passed  to  scrollbars  via  the  -scrollcommand
                     option.

              pathName view moveto fraction
                     Adjusts  the  view  in the window so that fraction of the total width of the
                     tabset text is off-screen to the left.  fraction must be  a  number  between
                     0.0 and 1.0.

              pathName view scroll number what
                     This  command  shifts  the  view  in  the  window (left/top or right/bottom)
                     according to number and what.  Number must  be  an  integer.  What  must  be
                     either  units  or  pages or an abbreviation of these.  If what is units, the
                     view adjusts left or right by number scroll units (see the  -scrollincrement
                     option).   ;  if it is pages then the view adjusts by number widget windows.
                     If number is negative then tabs farther to the left become visible; if it is
                     positive then tabs farther to the right become visible.

WIDGET OPTIONS

       Widget configuration options may be set either by the configure operation or the Tk option
       command.  The resource class is Tabset.  The resource name is the name of the widget.

              option add *Tabset.Foreground white
              option add *Tabset.Background blue

       The following widget options are available:

       -activebackground color
              Sets the default active background color for tabs.  A tab is active when the  mouse
              is  positioned  over  it  or  set  by  the activate operation.  Individual tabs may
              override this option by setting the tab's -activebackground option.

       -activeforeground color
              Sets the default active foreground color for tabs.  A tab is active when the  mouse
              is  positioned  over  it  or  set  by  the activate operation.  Individual tabs may
              override this option by setting the tab's -activeforeground option.

       -anchor anchor
              Anchors the tab's text (and images) to a particular edge of the tab.   The  default
              value is center.

       -background color
              Sets the background color of the tabset.

       -borderwidth pixels
              Sets  the  width  of  the  3-D  border  around the outside edge of the widget.  The
              -relief option determines how the border is to be drawn.  The default is 2.

       -cursor cursor
              Specifies the widget's cursor.  The default cursor is "".

       -dashes dashList
              Sets the dash style of the focus outline.  When a tab has the widget's focus, it is
              drawn  with  a  dashed  outline  around  its label.  DashList is a list of up to 11
              numbers that alternately represent the lengths of the dashes and gaps on the  cross
              hair lines.  Each number must be between 1 and 255.  If dashList is "", the outline
              will be a solid line.  The default value is 5 2.

       -ellipsis string
              String to append to displayed labels that have  been  truncated  due  to  exceeding
              -labelmax.  The default is ....

       -endimage imageName
              Specify an image to be drawn after tabs (ie. on the right if -side = top).  This is
              used by a binding looking for endimage from the nearest subcommand.

       -fillwidth boolean
              Indicates if extra space should be  allocated  to  tabs  when  multiple  tiers  are
              displayed.  The default is yes.

       -font fontName
              Sets  the  default  font  for the text in tab labels.  Individual tabs may override
              this by setting the tab's -font option.  The default value  is  *-Helvetica-Bold-R-
              Normal-*-12-120-*.

       -foreground color
              Sets  the default color of tab labels.  Individual tabs may override this option by
              setting the tab's -foreground option.  The default value is black.

       -gap size
              Sets the gap (in pixels) between tabs.  The default value is 2.

       -gapleft size
              Sets a gap (in pixels) to leave between the text and -leftimage.  The default value
              is 2.

       -height pixels
              Specifies  the  requested height of widget.  If pixels is 0, then the height of the
              widget will be calculated based on the size the tabs and their pages.  The  default
              is 0.

       -highlightbackground  color
              Sets  the  color  to display in the traversal highlight region when the tabset does
              not have the input focus.

       -highlightcolor color
              Sets the color to use for the traversal highlight rectangle that  is  drawn  around
              the widget when it has the input focus.  The default is black.

       -highlightthickness pixels
              Sets  the width of the highlight rectangle to draw around the outside of the widget
              when it has the input focus. Pixels is a non-negative value and may have any of the
              forms  acceptable  to  Tk_GetPixels.   If  the value is zero, no focus highlight is
              drawn around the widget.  The default is 2.

       -labelbackground color
              Sets a background color for the label.  The default is ".

       -labelmax length
              Length at  which  to  truncate  displayed  label  text  after  appending  value  of
              -ellipsis.   This enables a user implemention of truncating labels as the number of
              tabs increases.  Default is 0 meaning do no truncation.

       -outerpad pixels
              Padding around the exterior of the tabset and folder.

       -pageheight pixels
              Sets the requested height of the page.  The page is the area under the tab used  to
              display  the page contents.  If pixels is 0, the maximum height of all embedded tab
              windows is used.  The default is 0.

       -pagewidth pixels
              Sets the requested width of the page.  The page is the area under the tab  used  to
              display  the  page contents.  If pixels is 0, the maximum width of all embedded tab
              windows is used.  The default is 0.

       -perforationcommand string
              Specifies a Tcl script to be invoked to tear off the current page  in  the  tabset.
              This  command  is typically invoked when left mouse button is released over the tab
              perforation.  The default action is to tear-off the page and place it  into  a  new
              toplevel window.

       -relief relief
              Specifies  the  3-D  effect for the tabset widget.  Relief specifies how the tabset
              should appear relative to widget that it is packed into; for example, raised  means
              the tabset should appear to protrude.  The default is sunken.

       -rotate theta
              Specifies  the  degrees  to  rotate  text  in  tab  labels.   Theta is a real value
              representing the number of degrees to rotate the tick labels.  The default  is  0.0
              degrees.

       -samewidth boolean
              Indicates  if each tab should be the same width.  If true, each tab will be as wide
              as the widest tab.  The default is no.

       -scrollcommand string
              Specifies the prefix for a command for communicating with scrollbars.  Whenever the
              view  in  the  widget's  window  changes, the widget will generate a Tcl command by
              concatenating the scroll command and two numbers.  If this option is not specified,
              then no command will be executed.

       -scrollincrement pixels
              Sets  the  smallest number of pixels to scroll the tabs.  If pixels is greater than
              0, this sets the units for scrolling (e.g.,   when  you  the  change  the  view  by
              clicking on the left and right arrows of a scrollbar).

       -selectbackground color
              Sets  the  color  to use when displaying background of the selected tab. Individual
              tabs can override this option by setting the tab's -selectbackground option.

       -selectcommand string
              Specifies a default Tcl script to be invoked when tabs are selected.  This  command
              is  typically  invoked  when left mouse button is pressed over the tab.  Individual
              tabs may  override  this  with  the  tab's  -command  option.   Alternatively,  the
              <<TabsetSelect>> virtual event may be bound to instead.  The default value is "".

       -selectforeground color
              Sets  the  default  color  of  the  selected tab's text label.  Individual tabs can
              override this option by setting the tab's  -selectforeground  option.  The  default
              value is black.

       -selectpad pixels
              Specifies extra padding to be displayed around the selected tab.  The default value
              is 3.

       -shadow colorAndOffset
              Sets the shadow color for the text in all tab labels.  If an offset isn't given, it
              defaults  to 1.  Drop shadows are useful when both the foreground and background of
              the tab have similar color intensities.  If color is the empty string, no shadow is
              drawn.  The default value is "".

       -shadowcolor color
              Sets the folder shadow color.

       -side side
              Specifies  the side of the widget to place tabs. The following values are valid for
              side. The default value is top.

              top       Tabs are drawn along the top.

              left      Tabs are drawn along the left side.

              right     Tabs are drawn along the right side.

              both      Tabs are drawn along the bottom side.

       -slant slant
              Specifies if the tabs should be slanted 45 degrees on the left and/or right  sides.
              The following values are valid for slant. The default is none.

              none      Tabs are drawn as a rectangle.

              left      The left side of the tab is slanted.

              right     The right side of the tab is slanted.

              both      Boths sides of the tab are slanted.

       -startimage imageName
              Specify an image to be drawn before tabs (ie. on the left if -side = top).  This is
              used by a binding looking for startimage from the nearest subcommand.

       -tabbackground color
              Sets the default background color of  tabs.   Individual  tabs  can  override  this
              option by setting the tab's -background option.

       -tabborderwidth pixels
              Sets  the  width  of  the  3-D  border  around  the  outside  edge of the tab.  The
              -tabrelief option determines how the border is to be drawn.  The default is 2.

       -tabforeground color
              Specifies the color to use when displaying a  tab's  label.   Individual  tabs  can
              override this option by setting the tab's -foreground option.

       -tabrelief relief
              Specifies  the 3-D effect for both tabs and folders.  Relief specifies how the tabs
              should appear relative to background of the widget; for example, raised  means  the
              tab should appear to protrude.  The default is raised.

       -tabtile image
              Specifies tiled background for tabs.  The default is "".

       -takefocus focus
              Provides  information used when moving the focus from window to window via keyboard
              traversal (e.g., Tab and Shift-Tab).  If focus is 0, this means  that  this  window
              should be skipped entirely during keyboard traversal.  1 means that the this window
              should always receive the input focus.  An empty value  means  that  the  traversal
              scripts decide whether to focus on the window.  The default is 1.

       -tearoff boolean
              Display tearoff.

       -textside side
              If  both  images  and text are specified for a tab, this option determines on which
              side of the tab the text is to be displayed. The valid sides are left, right,  top,
              and bottom.  The default value is left.

       -tiers number
              Specifies  the  maximum  number  of  tiers to use to display the tabs.  The default
              value is 1.

       -tile image
              Specifies a tiled background for the widget  background  excluding  the  tabs.   If
              image  isn't  "",  the  background  is  tiled  using  image.  Otherwise, the normal
              background color is drawn (see the -background option).  Image  must  be  an  image
              created  using  the  Tk  image  command.   The  default  is  "".  Specifies a tiled
              background image for the background of the widget.  This does not include the tabs.

       -transient boolean
              Tearoff window should be transient.

       -width pixels
              Specifies the requested width of the widget.  If pixels is 0, then the width of the
              widget  will be calculated based on the size the tabs and their pages.  The default
              is 0.

TAB OPTIONS

       In addition to the configure operation, widget configuration options may also  be  set  by
       the Tk option command.  The class resource name is Tab.

              option add *Tabset.Tab.Foreground white
              option add *Tabset.name.Background blue

       The following widget options are available:

       -activebackground color
              Sets  the  active background color for nameOrIndex.  A tab is active when the mouse
              is positioned over it or  set  by  the  activate  operation.   This  overrides  the
              widget's -activebackground option.

       -activeforeground color
              Sets  the  default active foreground color nameOrIndex.  A tab is "active" when the
              mouse is positioned over it or set by the activate operation.  Individual tabs  may
              override this option by setting the tab's -activeforeground option.

       -anchor anchor
              Anchors  the tab's embedded widget to a particular edge of the folder.  This option
              has effect only if the space in the  folder  surrounding  the  embedded  widget  is
              larger  than  the widget itself. Anchor specifies how the widget will be positioned
              in the extra space.  For example, if anchor is center then the window  is  centered
              in  the  folder  ; if anchor is w then the window will be aligned with the leftmost
              edge of the folder. The default value is center.

       -background color
              Sets the background color for  nameOrIndex.   Setting  this  option  overrides  the
              widget's -tabbackground option.

       -bindtags tagList
              Specifies  the  binding tags for this tab.  TagList is a list of binding tag names.
              The tags and their order will  determine  how  commands  for  events  in  tabs  are
              invoked.   Each  tag  in  the  list  matching  the event sequence will have its Tcl
              command executed.  Implicitly the name of the tab is always the first  tag  in  the
              list.  The default value is all.

       -command string
              Specifies  a  Tcl  script  to  be  associated  with  nameOrIndex.   This command is
              typically invoked when left mouse button is pressed over  the  tab.   Setting  this
              option overrides the widget's -selectcommand option.

       -data string
              Specifies a string to be associated with nameOrIndex.  This value isn't used in the
              widget code.  It may be used in Tcl bindings to associate extra  data  (other  than
              the image or text) with the tab. The default value is "".

       -fill fill
              If the space in the folder surrounding the tab's embedded widget is larger than the
              widget, then fill indicates if the embedded widget should be  stretched  to  occupy
              the extra space.  Fill is either none, x, y, both.  For example, if fill is x, then
              the widget is stretched horizontally.  If  fill  is  y,  the  widget  is  stretched
              vertically.  The default is none.

       -font fontName
              Sets  the  font  for  the text in tab labels.  If fontName is not the empty string,
              this overrides the tabset's -font option.  The default value is "".

       -foreground color
              Sets the color of the label for nameOrIndex.  If color is  not  the  empty  string,
              this overrides the widget's -tabforeground option.  The default value is "".

       -hidden bool
              Hide  the tab.  The default is 0.  The tab should be changed to not be the selected
              tab before setting it to hidden.

       -image imageName
              Specifies the image to be drawn in label for nameOrIndex.  If image is "", no image
              will  be  drawn.   Both  text  and  images may be displayed at the same time in tab
              labels.  The default value is "".

       -leftimage imageName
              Specify a second image to be drawn to the left before text/image when  the  widgets
              -textside  =  right.   This  image  might  represent  a close icon when used with a
              binding that looks for leftimage from the nearest subcommand.

       -ipadx pad
              Sets the padding to the left and right of the label.  Pad can be a list of  one  or
              two  screen  distances.   If  pad  has  two elements, the left side of the label is
              padded by the first distance and the right side by the second.  If pad has just one
              distance, both the left and right sides are padded evenly.  The default value is 0.

       -ipady pad
              Sets  the  padding to the top and bottom of the label.  Pad can be a list of one or
              two screen distances.  If pad has two elements, the top of the label is  padded  by
              the  first  distance  and  the bottom by the second.  If pad has just one distance,
              both the top and bottom sides are padded evenly.  The default value is 0.

       -padx pad
              Sets the padding around the left and right of the embedded widget, if  one  exists.
              Pad  can  be  a  list of one or two screen distances.  If pad has two elements, the
              left side of the widget is padded by the first distance and the right side  by  the
              second.   If  pad  has  just one distance, both the left and right sides are padded
              evenly.  The default value is 0.

       -pady pad
              Sets the padding around the top and bottom of the embedded widget, if  one  exists.
              Pad can be a list of one or two screen distances.  If pad has two elements, the top
              of the widget is padded by the first distance and the bottom by the second.  If pad
              has  just  one  distance,  both  the  top  and bottom sides are padded evenly.  The
              default value is 0.

       -selectbackground color
              Sets the color to use when displaying background of the selected tab. If  color  is
              not  the  empty  string,  this overrides the widget's -selectbackground option. The
              default value is "".

       -shadow color
              Sets the shadow color for the text in the tab's label. Drop shadows are useful when
              both  the  foreground and background of the tab have similar color intensities.  If
              color is the empty string, no shadow is drawn.  The default value is "".

       -state state
              Sets the state of the tab. If state is disable the text of  the  tab  is  drawn  as
              engraved  and  operations  on the tab (such as invoke and tab tearoff) are ignored.
              The default is normal.

       -stipple bitmap
              Specifies a stipple pattern to use for the background of the folder when the window
              is  torn off.  Bitmap specifies a bitmap to use as the stipple pattern. The default
              is BLT.

       -text text
              Specifies the text of the tab's label.  The exact way the  text  is  drawn  may  be
              affected by other options such as -state or -rotate.

       -tornwindow text
              Name of window that was torn off.

       -underline num
              Character to underline in text.  Default is -1.

       -window pathName
              Specifies  the widget to be embedded into the tab.  PathName must be a child of the
              tabset widget.  The tabset will  "pack"  and  manage  the  size  and  placement  of
              pathName.  The default value is "".

       -windowheight pixels
              Sets  the requested height of the page.  The page is the area under the tab used to
              display the page contents.  If pixels is 0, the maximum height of all embedded  tab
              windows is used.  The default is 0.

       -windowwidth pixels
              Sets  the  requested width of the page.  The page is the area under the tab used to
              display the page contents.  If pixels is 0, the maximum width of all  embedded  tab
              windows is used.  The default is 0.

DEFAULT BINDINGS

       BLT  automatically  generates  class bindings that supply tabsets their default behaviors.
       The following event sequences are set by default for  tabsets  (via  the  class  bind  tag
       Tabset):

       <ButtonPress-2>

       <B2-Motion>

       <ButtonRelease-2>
              Mouse  button  2  may  be used for scanning.  If it is pressed and dragged over the
              tabset, the contents of the tabset drag at high speed in the  direction  the  mouse
              moves.

       <KeyPress-Up>

       <KeyPress-Down>
              The up and down arrow keys move the focus to the tab immediately above or below the
              current focus tab.  The tab with focus is drawn with the a  dashed  outline  around
              the tab label.

       <KeyPress-Left>

       <KeyPress-Right>
              The  left and right arrow keys move the focus to the tab immediately to the left or
              right of the current focus tab.  The tab with focus is  drawn  with  the  a  dashed
              outline around the tab label.

       <KeyPress-space>

       <KeyPress-Return>
              The  space  and  return  keys select the current tab given focus.  When a folder is
              selected, it's command is invoked and the embedded widget is mapped.

       Each tab, by default, also has a set of bindings (via the tag all).  These bindings may be
       reset using the tabset's bind operation.

       <Enter>

       <Leave>
              When  the  mouse  pointer  enters  a tab, it is activated (i.e. drawn in its active
              colors) and when the pointer leaves, it is redrawn in its normal colors.

       <ButtonRelease-1>
              Clicking with the left mouse button on a tab causes the tab to be selected and  its
              Tcl  script (see the -command or -selectcommand options) to be invoked.  The folder
              and any embedded widget (if one is specified) is automatically mapped.

       <ButtonRelease-3>

       <Control-ButtonRelease-1>
              Clicking on the right mouse button (or the left mouse button with the  Control  key
              held  down)  tears  off the current page into its own toplevel widget. The embedded
              widget is re-packed into a new toplevel and an outline of the widget  is  drawn  in
              the  folder.  Clicking again (toggling) will reverse this operation and replace the
              page back in the folder.

BIND TAGS

       You can bind commands to tabs that are triggered when a particular event  sequence  occurs
       in them, much like canvas items in Tk's canvas widget.  Not all event sequences are valid.
       The only binding events that may be specified are those related to the mouse and  keyboard
       (such as Enter, Leave, ButtonPress, Motion, and KeyPress).

       It  is  possible for multiple bindings to match a particular event.  This could occur, for
       example, if one binding is associated with the tab name and another is associated with the
       tab's  tags  (see  the -bindtags option).  When this occurs, all the matching bindings are
       invoked.  A binding associated with the tab name is invoked first, followed by one binding
       for each of the tab's bindtags.  If there are multiple matching bindings for a single tag,
       then only the most specific binding is invoked.  A continue command in  a  binding  script
       terminates that script, and a break command terminates that script and skips any remaining
       scripts for the event, just as for the bind command.

       The -bindtags option for tabs controls addition tag names that can be matched.  Implicitly
       the first tag for each tab is its name.  Setting the value of the -bindtags option doesn't
       change this.

       Note  that  the  <<TabsetTearoff>>  virtual  event  is  generated  on  tearoff.   and  the
       <<TabsetSelect>> virtual event is generated on selection.

EXAMPLE

       You create a tabset widget with the tabset command.

              # Create a new tabset
              tabset .ts -relief sunken -borderwidth 2

       A  new  Tcl command .ts is also created.  This command can be used to query and modify the
       tabset.  For example, to change the default font used by all the tab labels, you  use  the
       new command and the tabset's configure operation.

              # Change the default font.
              .ts configure -font "fixed"

       You can then add folders using the insert operation.

              # Create a new folder "f1"
              .ts insert 0 "f1"

       This  inserts  the  new tab named "f1" into the tabset.  The index 0 indicates location to
       insert the new tab.  You can also use the index end to append a tab  to  the  end  of  the
       tabset.   By  default, the text of the tab is the name of the tab.  You can change this by
       configuring the -text option.

              # Change the label of "f1"
              .ts tab configure "f1" -text "Tab #1"

       The insert operation lets you add one or more folders at a time.

              .ts insert end "f2" -text "Tab #2" "f3" "f4"

       The tab on each folder contains a label.  A label may display both an  image  and  a  text
       string.   You  can  reconfigure  the tab's attributes (foreground/background colors, font,
       rotation, etc) using the tab configure operation.

              # Add an image to the label of "f1"
              set image [image create photo -file stopsign.gif]
              .ts tab configure "f1" -image $image
              .ts tab configure "f2" -rotate 90

       Each folder may contain an embedded widget to represent its contents.  The  widget  to  be
       embedded  must be a child of the tabset widget.  Using the -window option, you specify the
       name of widget to be embedded.  But don't pack  the  widget,  the  tabset  takes  care  of
       placing and arranging the widget for you.

              graph .ts.graph
              .ts tab configure "f1" -window ".ts.graph" \
                  -fill both -padx 0.25i -pady 0.25i

       The  size  of  the  folder  is determined the sizes of the Tk widgets embedded inside each
       folder.  The folder will be as wide as the  widest  widget  in  any  folder.  The  tallest
       determines  the height.  You can use the tab's -pagewidth and -pageheight options override
       this.

       Other options control how the widget appears in the folder.  The -fill  option  says  that
       you wish to have the widget stretch to fill the available space in the folder.

              .ts tab configure "f1" -fill both -padx 0.25i -pady 0.25i

       Now  when  you  click  the  left  mouse button on "f1", the graph will be displayed in the
       folder.  It will be automatically hidden when another folder is selected.  If you click on
       the  right  mouse  button, the embedded widget will be moved into a toplevel widget of its
       own.  Clicking again on the right mouse button puts it back into the folder.

       If you want to share a page between two different folders, the -command  option  lets  you
       specify  a  Tcl  command to be invoked whenever the folder is selected.  You can reset the
       -window option for the tab whenever it's clicked.

              .ts tab configure "f2" -command {
                  .ts tab configure "f2" -window ".ts.graph"
              }
              .ts tab configure "f1" -command {
                  .ts tab configure "f1" -window ".ts.graph"
              }

       If you have many folders, you may wish to stack tabs  in  multiple  tiers.   The  tabset's
       -tiers option requests a maximum number of tiers.   The default is one tier.

              .ts configure -tiers 2

       If the tabs can fit in less tiers, the widget will use that many.  Whenever there are more
       tabs than can be displayed in the maximum number of tiers, the tabset  will  automatically
       let you scroll the tabs.  You can even attach a scrollbar to the tabset.

              .ts configure -scrollcommand { .sbar set }  -scrollincrement 20
              .sbar configure -orient horizontal -command { .ts view }

       By  default  tabs  are  along  the  top of the tabset from left to right.  But tabs can be
       placed on any side of the tabset using the -side option.

              # Arrange tabs along the right side of the tabset.
              .ts configure -side right -rotate 270

KEYWORDS

       tabset, widget