Provided by: manpages-posix-dev_2013a-1_all 
PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux implementation of
this interface may differ (consult the corresponding Linux manual page for details of
Linux behavior), or the interface may not be implemented on Linux.
NAME
getdate — convert user format date and time
SYNOPSIS
#include <time.h>
struct tm *getdate(const char *string);
DESCRIPTION
The getdate() function shall convert a string representation of a date or time into a
broken-down time.
The external variable or macro getdate_err, which has type int, is used by getdate() to
return error values. It is unspecified whether getdate_err is a macro or an identifier
declared with external linkage, and whether or not it is a modifiable lvalue. If a macro
definition is suppressed in order to access an actual object, or a program defines an
identifier with the name getdate_err, the behavior is undefined.
Templates are used to parse and interpret the input string. The templates are contained in
a text file identified by the environment variable DATEMSK. The DATEMSK variable should
be set to indicate the full pathname of the file that contains the templates. The first
line in the template that matches the input specification is used for interpretation and
conversion into the internal time format.
The following conversion specifications shall be supported:
%% Equivalent to %.
%a Abbreviated weekday name.
%A Full weekday name.
%b Abbreviated month name.
%B Full month name.
%c Locale's appropriate date and time representation.
%C Century number [00,99]; leading zeros are permitted but not required.
%d Day of month [01,31]; the leading 0 is optional.
%D Date as %m/%d/%y.
%e Equivalent to %d.
%h Abbreviated month name.
%H Hour [00,23].
%I Hour [01,12].
%m Month number [01,12].
%M Minute [00,59].
%n Equivalent to <newline>.
%p Locale's equivalent of either AM or PM.
%r The locale's appropriate representation of time in AM and PM notation. In the
POSIX locale, this shall be equivalent to %I:%M:%S %p.
%R Time as %H:%M.
%S Seconds [00,60]. The range goes to 60 (rather than stopping at 59) to allow
positive leap seconds to be expressed. Since leap seconds cannot be predicted by
any algorithm, leap second data must come from some external source.
%t Equivalent to <tab>.
%T Time as %H:%M:%S.
%w Weekday number (Sunday = [0,6]).
%x Locale's appropriate date representation.
%X Locale's appropriate time representation.
%y Year within century. When a century is not otherwise specified, values in the
range [69,99] shall refer to years 1969 to 1999 inclusive, and values in the range
[00,68] shall refer to years 2000 to 2068 inclusive.
Note: It is expected that in a future version of this standard the default
century inferred from a 2-digit year will change. (This would apply to
all commands accepting a 2-digit year as input.)
%Y Year as "ccyy" (for example, 2001).
%Z Timezone name or no characters if no timezone exists. If the timezone supplied by
%Z is not the timezone that getdate() expects, an invalid input specification
error shall result. The getdate() function calculates an expected timezone based
on information supplied to the function (such as the hour, day, and month).
The match between the template and input specification performed by getdate() shall be
case-insensitive.
The month and weekday names can consist of any combination of upper and lowercase letters.
The process can request that the input date or time specification be in a specific
language by setting the LC_TIME category (see setlocale()).
Leading zeros are not necessary for the descriptors that allow leading zeros. However, at
most two digits are allowed for those descriptors, including leading zeros. Extra white
space in either the template file or in string shall be ignored.
The results are undefined if the conversion specifications %c, %x, and %X include
unsupported conversion specifications.
The following rules apply for converting the input specification into the internal format:
* If %Z is being scanned, then getdate() shall initialize the broken-down time to be the
current time in the scanned timezone. Otherwise, it shall initialize the broken-down
time based on the current local time as if localtime() had been called.
* If only the weekday is given, the day chosen shall be the day, starting with today and
moving into the future, which first matches the named day.
* If only the month (and no year) is given, the month chosen shall be the month,
starting with the current month and moving into the future, which first matches the
named month. The first day of the month shall be assumed if no day is given.
* If no hour, minute, and second are given, the current hour, minute, and second shall
be assumed.
* If no date is given, the hour chosen shall be the hour, starting with the current hour
and moving into the future, which first matches the named hour.
If a conversion specification in the DATEMSK file does not correspond to one of the
conversion specifications above, the behavior is unspecified.
The getdate() function need not be thread-safe.
RETURN VALUE
Upon successful completion, getdate() shall return a pointer to a struct tm. Otherwise,
it shall return a null pointer and set getdate_err to indicate the error.
ERRORS
The getdate() function shall fail in the following cases, setting getdate_err to the value
shown in the list below. Any changes to errno are unspecified.
1. The DATEMSK environment variable is null or undefined.
2. The template file cannot be opened for reading.
3. Failed to get file status information.
4. The template file is not a regular file.
5. An I/O error is encountered while reading the template file.
6. Memory allocation failed (not enough memory available).
7. There is no line in the template that matches the input.
8. Invalid input specification. For example, February 31; or a time is specified that
cannot be represented in a time_t (representing the time in seconds since the Epoch).
The following sections are informative.
EXAMPLES
1. The following example shows the possible contents of a template:
%m
%A %B %d, %Y, %H:%M:%S
%A
%B
%m/%d/%y %I %p
%d,%m,%Y %H:%M
at %A the %dst of %B in %Y
run job at %I %p,%B %dnd
%A den %d. %B %Y %H.%M Uhr
2. The following are examples of valid input specifications for the template in Example
1:
getdate("10/1/87 4 PM");
getdate("Friday");
getdate("Friday September 18, 1987, 10:30:30");
getdate("24,9,1986 10:30");
getdate("at monday the 1st of december in 1986");
getdate("run job at 3 PM, december 2nd");
If the LC_TIME category is set to a German locale that includes freitag as a weekday
name and oktober as a month name, the following would be valid:
getdate("freitag den 10. oktober 1986 10.30 Uhr");
3. The following example shows how local date and time specification can be defined in
the template:
┌───────────────────────────┬──────────────────┐
│ Invocation │ Line in Template │
├───────────────────────────┼──────────────────┤
│getdate("11/27/86") │ %m/%d/%y │
│getdate("27.11.86") │ %d.%m.%y │
│getdate("86-11-27") │ %y-%m-%d │
│getdate("Friday 12:00:00") │ %A %H:%M:%S │
└───────────────────────────┴──────────────────┘
4. The following examples help to illustrate the above rules assuming that the current
date is Mon Sep 22 12:19:47 EDT 1986 and the LC_TIME category is set to the default C
locale:
┌─────────────┬──────────────────┬──────────────────────────────┐
│ Input │ Line in Template │ Date │
├─────────────┼──────────────────┼──────────────────────────────┤
│Mon │ %a │ Mon Sep 22 12:19:47 EDT 1986 │
│Sun │ %a │ Sun Sep 28 12:19:47 EDT 1986 │
│Fri │ %a │ Fri Sep 26 12:19:47 EDT 1986 │
│September │ %B │ Mon Sep 1 12:19:47 EDT 1986 │
│January │ %B │ Thu Jan 1 12:19:47 EST 1987 │
│December │ %B │ Mon Dec 1 12:19:47 EST 1986 │
│Sep Mon │ %b %a │ Mon Sep 1 12:19:47 EDT 1986 │
│Jan Fri │ %b %a │ Fri Jan 2 12:19:47 EST 1987 │
│Dec Mon │ %b %a │ Mon Dec 1 12:19:47 EST 1986 │
│Jan Wed 1989 │ %b %a %Y │ Wed Jan 4 12:19:47 EST 1989 │
│Fri 9 │ %a %H │ Fri Sep 26 09:00:00 EDT 1986 │
│Feb 10:30 │ %b %H:%S │ Sun Feb 1 10:00:30 EST 1987 │
│10:30 │ %H:%M │ Tue Sep 23 10:30:00 EDT 1986 │
│13:30 │ %H:%M │ Mon Sep 22 13:30:00 EDT 1986 │
└─────────────┴──────────────────┴──────────────────────────────┘
APPLICATION USAGE
Although historical versions of getdate() did not require that <time.h> declare the
external variable getdate_err, this volume of POSIX.1‐2008 does require it. The standard
developers encourage applications to remove declarations of getdate_err and instead
incorporate the declaration by including <time.h>.
Applications should use %Y (4-digit years) in preference to %y (2-digit years).
RATIONALE
In standard locales, the conversion specifications %c, %x, and %X do not include
unsupported conversion specifiers and so the text regarding results being undefined is not
a problem in that case.
FUTURE DIRECTIONS
None.
SEE ALSO
ctime(), localtime(), setlocale(), strftime(), times()
The Base Definitions volume of POSIX.1‐2008, <time.h>
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std
1003.1, 2013 Edition, Standard for Information Technology -- Portable Operating System
Interface (POSIX), The Open Group Base Specifications Issue 7, Copyright (C) 2013 by the
Institute of Electrical and Electronics Engineers, Inc and The Open Group. (This is
POSIX.1-2008 with the 2013 Technical Corrigendum 1 applied.) In the event of any
discrepancy between this version and the original IEEE and The Open Group Standard, the
original IEEE and The Open Group Standard is the referee document. The original Standard
can be obtained online at http://www.unix.org/online.html .
Any typographical or formatting errors that appear in this page are most likely to have
been introduced during the conversion of the source files to man page format. To report
such errors, see https://www.kernel.org/doc/man-pages/reporting_bugs.html .