Provided by: tcllib_1.17-dfsg-1_all 
NAME
pt::rde - Parsing Runtime Support, PARAM based
SYNOPSIS
package require Tcl 8.5
package require pt::rde ?1.0.3?
package require snit
package require struct::stack 1.4
package require pt::ast 1.1
::pt::rde objectName
objectName destroy
objectName reset chan
objectName complete
objectName chan
objectName line
objectName column
objectName current
objectName location
objectName locations
objectName ok
objectName value
objectName error
objectName errors
objectName tokens ?from ?to??
objectName symbols
objectName known
objectName reducible
objectName asts
objectName ast
objectName position loc
objectName i_input_next msg
objectName i_test_alnum
objectName i_test_alpha
objectName i_test_ascii
objectName i_test_char char
objectName i_test_ddigit
objectName i_test_digit
objectName i_test_graph
objectName i_test_lower
objectName i_test_print
objectName i_test_punct
objectName i_test_range chars chare
objectName i_test_space
objectName i_test_upper
objectName i_test_wordchar
objectName i_test_xdigit
objectName i_error_clear
objectName i_error_push
objectName i_error_pop_merge
objectName i_error_nonterminal symbol
objectName i_status_ok
objectName i_status_fail
objectName i_status_negate
objectName i_loc_push
objectName i_loc_pop_discard
objectName i_loc_pop_rewind
objectName i:ok_loc_pop_rewind
objectName i_loc_pop_rewind/discard
objectName i_symbol_restore symbol
objectName i_symbol_save symbol
objectName i_value_clear
objectName i_value_clear/leaf
objectName i_value_clear/reduce
objectName i:ok_ast_value_push
objectName i_ast_push
objectName i_ast_pop_rewind
objectName i:fail_ast_pop_rewind
objectName i_ast_pop_rewind/discard
objectName i_ast_pop_discard
objectName i_ast_pop_discard/rewind
objectName i:ok_continue
objectName i:fail_continue
objectName i:fail_return
objectName i:ok_return
objectName si:void_state_push
objectName si:void2_state_push
objectName si:value_state_push
objectName si:void_state_merge
objectName si:void_state_merge_ok
objectName si:value_state_merge
objectName si:value_notahead_start
objectName si:void_notahead_exit
objectName si:value_notahead_exit
objectName si:kleene_abort
objectName si:kleene_close
objectName si:voidvoid_branch
objectName si:voidvalue_branch
objectName si:valuevoid_branch
objectName si:valuevalue_branch
objectName si:voidvoid_part
objectName si:voidvalue_part
objectName si:valuevalue_part
objectName si:value_symbol_start symbol
objectName si:value_void_symbol_start symbol
objectName si:void_symbol_start symbol
objectName si:void_void_symbol_start symbol
objectName si:reduce_symbol_end symbol
objectName si:void_leaf_symbol_end symbol
objectName si:value_leaf_symbol_end symbol
objectName si:value_clear_symbol_end symbol
objectName si:void_clear_symbol_end symbol
objectName si:next_char tok
objectName si:next_range toks toke
objectName si:next_alnum
objectName si:next_alpha
objectName si:next_ascii
objectName si:next_ddigit
objectName si:next_digit
objectName si:next_graph
objectName si:next_lower
objectName si:next_print
objectName si:next_punct
objectName si:next_space
objectName si:next_upper
objectName si:next_wordchar
objectName si:next_xdigit
_________________________________________________________________________________________________
DESCRIPTION
Are you lost ? Do you have trouble understanding this document ? In that case please
read the overview provided by the Introduction to Parser Tools. This document is the
entrypoint to the whole system the current package is a part of.
This package provides a class whose instances provide the runtime support for recursive
descent parsers with backtracking, as is needed for the execution of, for example, parsing
expression grammars. It implements the PackRat Machine Specification, as such that
document is required reading to understand both this manpage, and the package itself. The
description below does make numerous shorthand references to the PARAM's instructions and
the various parts of its architectural state.
The package resides in the Execution section of the Core Layer of Parser Tools.
IMAGE: arch_core_transform
Note: This package not only has the standard Tcl implementation, but also an accelerator,
i.e. a C implementation, based on Critcl.
CLASS API
The package exports the API described here.
::pt::rde objectName
The command creates a new runtime object for a recursive descent parser with
backtracking and returns the fully qualified name of the object command as its
result. The API of this object command is described in the section Object API. It
may be used to invoke various operations on the object.
OBJECT API
All objects created by this package provide the following 63 methods for the manipulation
and querying of their state, which is, in essence the architectural state of a PARAM.
First some general methods and the state accessors.
objectName destroy
This method destroys the object, releasing all claimed memory, and deleting the
associated object command.
objectName reset chan
This method resets the state of the runtme to its defaults, preparing it for the
parsing of the character in the channel chan, which becomes IN.
Note here that the Parser Tools are based on Tcl 8.5+. In other words, the channel
argument is not restricted to files, sockets, etc. We have the full power of
reflected channels available.
It should also be noted that the parser pulls the characters from the input stream
as it needs them. If a parser created by this package has to be operated in a push
aka event-driven manner it will be necessary to go to Tcl 8.6+ and use the
coroutine::auto to wrap it into a coroutine where read is properly changed for
push-operation.
objectName complete
This method completes parsing, either returning the AST made from the elements of
ARS, or throwing an error containing the current ER.
objectName chan
This method returns the handle of the channel which is IN.
objectName line
This method returns the line number for the position IN is currently at. Note that
this may not match with the line number for CL, due to backtracking.
objectName column
This method returns the column for the position IN is currently at. Note that this
may not match with the column for CL, due to backtracking.
objectName current
This method returns CC.
objectName location
This method returns CL.
objectName locations
This method returns the LS. The topmost entry of the stack will be the first
element of the returned list.
objectName ok
This method returns ST.
objectName value
This method returns SV.
objectName error
This method returns ER. This is either the empty string for an empty ER, or a list
of 2 elements, the location the error is for, and a set of messages which specify
which symbols were expected at the location. The messages are encoded as one of the
possible atomic parsing expressions (special operators, terminal, range, and
nonterminal operator).
objectName errors
This method returns ES. The topmost entry of the stack will be the first element of
the returned list. Each entry is encoded as described for error.
objectName tokens ?from ?to??
This method returns the part of TC for the range of locations of IN starting at
from and ending at to. If to is not specified it is taken as identical to from. If
neither argument is specified the whole of TC is returned.
Each token in the returned list is a list of three elements itself, containing the
character at the location, and the associated line and column numbers, in this
order.
objectName symbols
This method returns a dictionary containing NC. Keys are two-element lists
containing nonterminal symbol and location, in this order. The values are 4-tuples
containing CL, ST, ER, and SV, in this order. ER is encoded as specified for the
method error.
objectName known
This method returns a list containing the keys of SC. They are encoded in the same
manner as is done by method symbols.
objectName reducible
This method returns ARS. The topmost entry of the stack will be the first element
of the returned list
objectName asts
This method returns AS. The topmost entry of the stack will be the first element of
the returned list
objectName ast
This is a convenience method returning the topmost element of ARS.
objectName position loc
This method returns the line and column numbers for the specified location of IN,
assuming that this location has already been reached during the parsing process.
The following methods implement all PARAM instructions. They all have the prefix "i_".
The control flow is mainly provided by Tcl's builtin commands, like if, while, etc., plus
a few guarded variants of PARAM instructions and Tcl commands.. That means that these
instruction variants will do nothing if their guard condition is not fulfilled. They can
be recognized by the prefix "i:ok_" and "i:fail_", which denote the value ST has to have
for the instruction to execute.
The instructions are listed in the same order they occur in the PackRat Machine
Specification, with the guard variants listed after their regular implementation, if any,
or in their place.
objectName i_input_next msg
This method implements the PARAM instruction input_next.
objectName i_test_alnum
This method implements the PARAM instruction test_alnum.
objectName i_test_alpha
This method implements the PARAM instruction test_alpha.
objectName i_test_ascii
This method implements the PARAM instruction test_ascii.
objectName i_test_char char
This method implements the PARAM instruction test_char.
objectName i_test_ddigit
This method implements the PARAM instruction test_ddigit.
objectName i_test_digit
This method implements the PARAM instruction test_digit.
objectName i_test_graph
This method implements the PARAM instruction test_graph.
objectName i_test_lower
This method implements the PARAM instruction test_lower.
objectName i_test_print
This method implements the PARAM instruction test_print.
objectName i_test_punct
This method implements the PARAM instruction test_punct.
objectName i_test_range chars chare
This method implements the PARAM instruction test_range.
objectName i_test_space
This method implements the PARAM instruction test_space.
objectName i_test_upper
This method implements the PARAM instruction test_upper.
objectName i_test_wordchar
This method implements the PARAM instruction test_wordchar.
objectName i_test_xdigit
This method implements the PARAM instruction test_xdigit.
objectName i_error_clear
This method implements the PARAM instruction error_clear.
objectName i_error_push
This method implements the PARAM instruction error_push.
objectName i_error_pop_merge
This method implements the PARAM instruction error_pop_merge.
objectName i_error_nonterminal symbol
This method implements the PARAM instruction error_nonterminal.
objectName i_status_ok
This method implements the PARAM instruction status_ok.
objectName i_status_fail
This method implements the PARAM instruction status_fail.
objectName i_status_negate
This method implements the PARAM instruction status_negate.
objectName i_loc_push
This method implements the PARAM instruction loc_push.
objectName i_loc_pop_discard
This method implements the PARAM instruction loc_pop_discard.
objectName i_loc_pop_rewind
This method implements the PARAM instruction loc_pop_rewind.
objectName i:ok_loc_pop_rewind
This guarded method, a variant of i_loc_pop_rewind, executes only for "ST == ok".
objectName i_loc_pop_rewind/discard
This method is a convenient combination of control flow and the two PARAM
instructions loc_pop_rewind and loc_pop_discard. The former is executed for "ST ==
fail", the latter for "ST == ok".
objectName i_symbol_restore symbol
This method implements the PARAM instruction symbol_restore.
The boolean result of the check is returned as the result of the method and can be
used with standard Tcl control flow commands.
objectName i_symbol_save symbol
This method implements the PARAM instruction symbol_save.
objectName i_value_clear
This method implements the PARAM instruction value_clear.
objectName i_value_clear/leaf
This method is a convenient combination of control flow and the two PARAM
instructions value_clear and value_leaf. The former is executed for "ST == fail",
the latter for "ST == ok".
objectName i_value_clear/reduce
This method is a convenient combination of control flow and the two PARAM
instructions value_clear and value_reduce. The former is executed for "ST == fail",
the latter for "ST == ok".
objectName i:ok_ast_value_push
This method implements a guarded variant of the the PARAM instruction
ast_value_push, which executes only for "ST == ok".
objectName i_ast_push
This method implements the PARAM instruction ast_push.
objectName i_ast_pop_rewind
This method implements the PARAM instruction ast_pop_rewind.
objectName i:fail_ast_pop_rewind
This guarded method, a variant of i_ast_pop_rewind, executes only for "ST == fail".
objectName i_ast_pop_rewind/discard
This method is a convenient combination of control flow and the two PARAM
instructions ast_pop_rewind and ast_pop_discard. The former is executed for "ST ==
fail", the latter for "ST == ok".
objectName i_ast_pop_discard
This method implements the PARAM instruction ast_pop_discard.
objectName i_ast_pop_discard/rewind
This method is a convenient combination of control flow and the two PARAM
instructions ast_pop_discard and ast_pop_rewind. The former is executed for "ST ==
fail", the latter for "ST == ok".
objectName i:ok_continue
This guarded method executes only for "ST == ok". Then it aborts the current
iteration of the innermost loop in the calling Tcl procedure.
objectName i:fail_continue
This guarded method executes only for "ST == fail". Then it aborts the current
iteration of the innermost loop in the calling Tcl procedure.
objectName i:fail_return
This guarded method executes only for "ST == fail". Then it aborts the calling Tcl
procedure.
objectName i:ok_return
This guarded method executes only for "ST == ok". Then it aborts the calling Tcl
procedure.
The next set of methods are super instructions, meaning that each implements a longer
sequence of instructions commonly used in parsers. The combinated instructions of the
previous set, i.e. those with names matching the pattern "i_*/*", are actually super
instructions as well, albeit with limited scope, handling 2 instructions with their
control flow. The upcoming set is much broader in scope, folding as much as six or more
PARAM instructions into a single method call.
In this we can see the reasoning behind their use well:
[1] By using less instructions the generated parsers become smaller, as the common
parts are now truly part of the common runtime, and not explicitly written in the
parser's code over and over again.
[2] Using less instructions additionally reduces the overhead associated with calls
into the runtime, i.e. the cost of method dispatch and of setting up the variable
context.
[3] Another effect of the super instructions is that their internals can be optimized
as well, especially regarding control flow, and stack use, as the runtime internals
are accessible to all instructions folded into the sequence.
objectName si:void_state_push
This method combines
i_loc_push
i_error_clear
i_error_push
Parsers use it at the beginning of void sequences and choices with a void initial
branch.
objectName si:void2_state_push
This method combines
i_loc_push
i_error_clear
i_error_push
Parsers use it at the beginning of optional and repeated expressions.
objectName si:value_state_push
This method combines
i_ast_push
i_loc_push
i_error_clear
i_error_push
Parsers use it at the beginning of sequences generating an AST and choices with an
initial branch generating an AST.
objectName si:void_state_merge
This method combines
i_error_pop_merge
i_loc_pop_rewind/discard
Parsers use it at the end of void sequences and choices whose last branch is void.
objectName si:void_state_merge_ok
This method combines
i_error_pop_merge
i_loc_pop_rewind/discard
i_status_ok
Parsers use it at the end of optional expressions
objectName si:value_state_merge
This method combines
i_error_pop_merge
i_ast_pop_rewind/discard
i_loc_pop_rewind/discard
Parsers use it at the end of sequences generating ASTs and choices whose last
branch generates an AST
objectName si:value_notahead_start
This method combines
i_loc_push
i_ast_push
Parsers use it at the beginning of negative lookahead predicates which generate
ASTs.
objectName si:void_notahead_exit
This method combines
i_loc_pop_rewind
i_status_negate
Parsers use it at the end of void negative lookahead predicates.
objectName si:value_notahead_exit
This method combines
i_ast_pop_discard/rewind
i_loc_pop_rewind
i_status_negate
Parsers use it at the end of negative lookahead predicates which generate ASTs.
objectName si:kleene_abort
This method combines
i_loc_pop_rewind/discard
i:fail_return
Parsers use it to stop a positive repetition when its first, required, expression
fails.
objectName si:kleene_close
This method combines
i_error_pop_merge
i_loc_pop_rewind/discard
i:fail_status_ok
i:fail_return
Parsers use it at the end of repetitions.
objectName si:voidvoid_branch
This method combines
i_error_pop_merge
i:ok_loc_pop_discard
i:ok_return
i_loc_rewind
i_error_push
Parsers use it when transiting between branches of a choice when both are void.
objectName si:voidvalue_branch
This method combines
i_error_pop_merge
i:ok_loc_pop_discard
i:ok_return
i_ast_push
i_loc_rewind
i_error_push
Parsers use it when transiting between branches of a choice when the failing branch
is void, and the next to test generates an AST.
objectName si:valuevoid_branch
This method combines
i_error_pop_merge
i_ast_pop_rewind/discard
i:ok_loc_pop_discard
i:ok_return
i_loc_rewind
i_error_push
Parsers use it when transiting between branches of a choice when the failing branch
generates an AST, and the next to test is void.
objectName si:valuevalue_branch
This method combines
i_error_pop_merge
i_ast_pop_discard
i:ok_loc_pop_discard
i:ok_return
i_ast_rewind
i_loc_rewind
i_error_push
Parsers use it when transiting between branches of a choice when both generate
ASTs.
objectName si:voidvoid_part
This method combines
i_error_pop_merge
i:fail_loc_pop_rewind
i:fail_return
i_error_push
Parsers use it when transiting between parts of a sequence and both are void.
objectName si:voidvalue_part
This method combines
i_error_pop_merge
i:fail_loc_pop_rewind
i:fail_return
i_ast_push
i_error_push
Parsers use it when transiting between parts of a sequence and the sucessfully
matched part is void, and after it an AST is generated.
objectName si:valuevalue_part
This method combines
i_error_pop_merge
i:fail_ast_pop_rewind
i:fail_loc_pop_rewind
i:fail_return
i_error_push
Parsers use it when transiting between parts of a sequence and both parts generate
ASTs.
objectName si:value_symbol_start symbol
This method combines
if/found? i_symbol_restore $symbol
i:found:ok_ast_value_push
i:found_return
i_loc_push
i_ast_push
Parsers use it at the beginning of a nonterminal symbol generating an AST, whose
right-hand side may have generated an AST as well.
objectName si:value_void_symbol_start symbol
This method combines
if/found? i_symbol_restore $symbol
i:found:ok_ast_value_push
i:found_return
i_loc_push
i_ast_push
Parsers use it at the beginning of a void nonterminal symbol whose right-hand side
may generate an AST.
objectName si:void_symbol_start symbol
This method combines
if/found? i_symbol_restore $symbol
i:found_return
i_loc_push
i_ast_push
Parsers use it at the beginning of a nonterminal symbol generating an AST whose
right-hand side is void.
objectName si:void_void_symbol_start symbol
This method combines
if/found? i_symbol_restore $symbol
i:found_return
i_loc_push
Parsers use it at the beginning of a void nonterminal symbol whose right-hand side
is void as well.
objectName si:reduce_symbol_end symbol
This method combines
i_value_clear/reduce $symbol
i_symbol_save $symbol
i_error_nonterminal $symbol
i_ast_pop_rewind
i_loc_pop_discard
i:ok_ast_value_push
Parsers use it at the end of a non-terminal symbol generating an AST using the AST
generated by the right-hand side as child.
objectName si:void_leaf_symbol_end symbol
This method combines
i_value_clear/leaf $symbol
i_symbol_save $symbol
i_error_nonterminal $symbol
i_loc_pop_discard
i:ok_ast_value_push
Parsers use it at the end of a non-terminal symbol generating an AST whose right-
hand side is void.
objectName si:value_leaf_symbol_end symbol
This method combines
i_value_clear/leaf $symbol
i_symbol_save $symbol
i_error_nonterminal $symbol
i_loc_pop_discard
i_ast_pop_rewind
i:ok_ast_value_push
Parsers use it at the end of a non-terminal symbol generating an AST discarding the
AST generated by the right-hand side.
objectName si:value_clear_symbol_end symbol
This method combines
i_value_clear
i_symbol_save $symbol
i_error_nonterminal $symbol
i_loc_pop_discard
i_ast_pop_rewind
Parsers use it at the end of a void non-terminal symbol, discarding the AST
generated by the right-hand side.
objectName si:void_clear_symbol_end symbol
This method combines
i_value_clear
i_symbol_save $symbol
i_error_nonterminal $symbol
i_loc_pop_discard
Parsers use it at the end of a void non-terminal symbol with a void right-hand
side.
objectName si:next_char tok
objectName si:next_range toks toke
objectName si:next_alnum
objectName si:next_alpha
objectName si:next_ascii
objectName si:next_ddigit
objectName si:next_digit
objectName si:next_graph
objectName si:next_lower
objectName si:next_print
objectName si:next_punct
objectName si:next_space
objectName si:next_upper
objectName si:next_wordchar
objectName si:next_xdigit
These methods all combine
i_input_next $msg
i:fail_return
with the appropriate i_test_xxx instruction. Parsers use them for handling atomic
expressions.
BUGS, IDEAS, FEEDBACK
This document, and the package it describes, will undoubtedly contain bugs and other
problems. Please report such in the category pt of the Tcllib Trackers
[http://core.tcl.tk/tcllib/reportlist]. Please also report any ideas for enhancements you
may have for either package and/or documentation.
KEYWORDS
EBNF, LL(k), PEG, TDPL, context-free languages, expression, grammar, matching, parser,
parsing expression, parsing expression grammar, push down automaton, recursive descent,
state, top-down parsing languages, transducer
CATEGORY
Parsing and Grammars
COPYRIGHT
Copyright (c) 2009 Andreas Kupries <andreas_kupries@users.sourceforge.net>