NAME

       shmem_int_wait(3),  shmem_int_wait(3)_until, shmem_int4_wait(3), shmem_int4_wait(3)_until,
       shmem_int8_wait(3),             shmem_int8_wait(3)_until,              shmem_long_wait(3),
       shmem_long_wait(3)_until,       shmem_longlong_wait(3),      shmem_longlong_wait(3)_until,
       shmem_short_wait(3), shmem_short_wait(3)_until, shmem_wait(3), shmem_wait(3)_until - Waits
       for a variable on the local processing element (PE) to change

SYNOPSIS

       C or C++:
       #include <mpp/shmem.h>

       void shmem_int_wait(int *var, int value);

       void shmem_int_wait_until(int *var, int cond, int value);

       void shmem_long_wait(long *var, long value);

       void shmem_long_wait_until(long *var, int cond, long value);

       void shmem_longlong_wait(long long *var, long long value);

       void shmem_longlong_wait_until(long long *var, int cond,
         long long value);

       void shmem_short_wait(short *var, short value);

       void shmem_short_wait_until(short *var, int cond,
         short value);

       void shmem_wait(long *ivar, long cmp_value);

       void shmem_wait_until(long *ivar, int cmp, long value);

       Fortran:
       INCLUDE "mpp/shmem.fh"

       CALL SHMEM_INT4_WAIT(ivar, cmp_value)

       CALL SHMEM_INT4_WAIT_UNTIL(ivar, cmp, cmp_value)

       CALL SHMEM_INT8_WAIT(ivar, cmp_value)

       CALL SHMEM_INT8_WAIT_UNTIL(ivar, cmp, cmp_value)

       CALL SHMEM_WAIT(ivar, cmp_value)

       CALL SHMEM_WAIT_UNTIL(ivar, cmp, cmp_value)

DESCRIPTION

       shmem_wait  and  shmem_wait_until  wait for ivar to be changed by a remote write or atomic
       swap issued by a different processor. These routines  can  be  used  for  point-to-  point
       directed  synchronization. A call to shmem_wait does not return until some other processor
       writes a value, not equal to cmp_value, into ivar on the  waiting  processor.  A  call  to
       shmem_wait_until  does  not  return until some other processor changes ivar to satisfy the
       condition implied by cmp and cmp_value. This mechanism is useful when a processor needs to
       tell another processor that it has completed some action.

       The arguments are as follows:

       target The  remotely accessible integer data object to be updated on the remote PE. If you
              are using C/C++, the type of target should  match  that  implied  in  the  SYNOPSIS
              section.  If you are using the Fortran compiler, it must be of type integer with an
              element size of 4 bytes for SHMEM_INT4_ADD and 8 bytes for SHMEM_INT8_ADD.

       value  The value to be atomically added to target. If you are using  C/C++,  the  type  of
              value  should match that implied in the SYNOPSIS section. If you are using Fortran,
              it must be of type integer with an element size of target.

       pe     An integer that indicates the PE number upon which target is to be updated. If  you
              are using Fortran, it must be a default integer value.

       ivar   A  remotely accessible integer variable that is being updated by another PE. If you
              are using C/C++, the type of  ivar  should  match  that  implied  in  the  SYNOPSIS
              section.  If  you  are  using  Fortran,  ivar must be a specific sized integer type
              according to the function being called, as follows:

              shmem_wait, shmem_wait_until: default INTEGER

              shmem_int4_wait, shmem_int4_wait_until: INTEGER*4

              shmem_int8_wait, shmem_int8_wait_until: INTEGER*8

       cmp    The compare operator that compares  ivar  with  cmp_value.  cmp  must  be  of  type
              integer.  If  you  are  using Fortran, it must be of default kind. If you are using
              C/C++, the type of cmp should match that  implied  in  the  SYNOPSIS  section.  The
              following cmp values are supported:

              SHMEM_CMP_EQ
                     Equal

              SHMEM_CMP_NE
                     Not equal

              SHMEM_CMP_GT
                     Greater than

              SHMEM_CMP_LE
                     Less than or equal to

              SHMEM_CMP_LT
                     Less than

              SHMEM_CMP_GE
                     Greater than or equal to

       cmp_value
              cmp_value  must  be  of type integer. If you are using C/C++, the type of cmp_value
              should match thatimplied in  the  SYNOPSIS  section.  If  you  are  using  Fortran,
              cmp_value  must  be  an  integer of the same size and kind as ivar.  The shmem_wait
              routines return when ivar is no longer equal to  cmp_value.   The  shmem_wait_until
              routines  return  when  the  compare  condition  is  true. The compare condition is
              defined by the ivar argument compared  with  the  cmp_value  using  the  comparison
              operator, cmp.

EXAMPLES

       Example 1: The following call returns when variable ivar is not equal to 100:
       INTEGER*8 IVAR

       CALL SHMEM_INT8_WAIT(IVAR, INT8(100))

       Example  2:  The  following  call  to  SHMEM_INT8_WAIT_UNTIL  is equivalent to the call to
       SHMEM_INT8_WAIT in example 1:
       INTEGER*8 IVAR

       CALL SHMEM_INT8_WAIT_UNTIL(IVAR, SHMEM_CMP_NE, INT8(100))

       Example 3: The following C/C++ call waits until the sign bit in ivar is set by a  transfer
       from a remote PE:
       int ivar;

       shmem_int_wait_until(&ivar, SHMEM_CMP_LT, 0);

       Example 4: The following Fortran example is in the context of a subroutine:
       SUBROUTINE EXAMPLE()
         INTEGER FLAG_VAR
         COMMON/FLAG/FLAG_VAR
         . . .
         FLAG_VAR = FLAG_VALUE ! initialize the event variable
         . . .
         IF (FLAG_VAR .EQ. FLAG_VALUE) THEN
           CALL SHMEM_WAIT(FLAG_VAR, FLAG_VALUE)
         ENDIF
         FLAG_VAR = FLAG_VALUE ! reset the event variable for next time
         . . .
       END

SEE ALSO

       intro_shmem(3), shmem_put(3)