Provided by: olsrd_0.6.6.2-1ubuntu1_amd64 bug

NAME

       olsrd.conf - configuration file for olsrd(8)

DESCRIPTION

       The  file  olsrd.conf Which is located in /etc by default, contains run-time configuration
       for the Optimized Link State Routing daemon olsrd(8).  Olsrd can however be set to read an
       alternative  configuration  file  at  startup  using  the  -f  command  line  argument.  A
       configuration file parser/generator olsrd_cfgparser(2) can be built as both  a  standalone
       executable  or a dynamically linked library from the olsrd sources. The DLL version can be
       used to easily create tools for generating/parsing olsrd configuration files.

       The configuration file consists of comments, single options and option blocks.

COMMENTS

       Comments are everything following a # in a line. This data is  discarded.  Commenting  out
       options is an easy way to make olsrd use the default value for that option.

SINGLE OPTIONS

       Single  options  are  single  lines  options that consists of a keword and a user supplied
       value. Note that a comment can follow such a option on the same line. Valid single options
       are:

       DebugLevel [0-9]
              Controls the amount of debug output olsrd sends to stdout.  If set to 0, olsrd will
              detatch from the current process and run in the background. A value of 9  yields  a
              maximum of debug output.  Defaults to 0.

       IpVersion [4|6]
              Olsrd  supports both IP version 4 and 6. This option controls what IP version olsrd
              is to use. Defaults to 4.

       AllowNoInt [yes|no]
              Olsrd supports dynamic  configuration  of  network  interfaces.   This  means  that
              interfaces  on  which  olsrd runs, can be reconfigured and olsrd will update itself
              with no need to  be  restarted.  Olsrd  also  supports  removal  and  addittion  of
              interfaces  in  run-time.  This option specifies if olsrd should keep running if no
              network interfaces are available. Defaults to yes.

       TosValue [0-16]
              This value controls the type of service value to set  in  the  IP  header  of  OLSR
              control traffic. Defaults to 16.

       Willingness [0-7]
              Nodes participating in a OLSR routed network will announce their willingness to act
              as relays for OLSR control traffic for their neighbors.  This  option  specifies  a
              fixed  willingness  value to be announced by the local node.  4 is a neutral option
              here, while 0 specifies that this node will never act as a relay, and  7  specifies
              that  this  node  will always act as such a relay. If this option is not set in the
              configuration file, then olsrd will try to retrieve information  about  the  system
              power  and  dynamically  update willingness according to this info. If no such info
              can be retrieved willingness is set to 4.

       OlsrPort [>1000]
              If set olsr uses specified port instead of its default IANA assigned port 698!

       RtProto [0|1-255]
              This setting configures the routing protocol ID to be used when setting routes  via
              rtnetlink,  see  RTNETLINK(7)  for  the  rtm_protocol keyword. Use 0 to specify the
              operating system default, e.g. RTPROT_BOOT on Linux). Defaults to 0.

       RtTableDefault [0|1-254]
              Defines the routing table for inserting a new default route.  Defaults  to  0  (use
              RtTable)

       RtTable [0|1-254]
              With  Linux and BSD, more than one routing table exist in the system. Together with
              a rules set  that  determines  which  table  handles  what  packets,  these  system
              functions  are  called  ‘iproute2’  or ‘Policy Routing’. You may want to read Linux
              Advanced Routing & Traffic Control ( http://lartc.org/ ) for details.  Defaults  to
              254 (or ‘main’, see /etc/iproute2/rt_tables currently only supported under linux!

       UseHysteresis [yes|no]
              If set to yes hysteresis will be used as explained in section 14 of RFC3626.

       HystScaling [0.01-0.99]
              Sets  the  scaling  value used by the hysteresis algorithm. This must be a positive
              floating point value smaller than 1.0. Consult RFC3626  for  details.  The  default
              value is 0.5.

       HystThrHigh [HystThrLow-0.99]
              This   option  sets  the  upper  threshold  for  accepting  a  link  in  hysteresis
              calculation.  The value must be higher than the one set  as  the  lower  threshold.
              Defaults to 0.8.

       HystThrLow [0.01-HystThrHigh]
              This  option  sets  the  lower  threshold  for  setting  a link to asymmetric using
              hysteresis.  The value must be lower than the  one  set  as  the  upper  threshold.
              Defaults to 0.3.

       Pollrate [0.1-10.0]
              This option sets the interval, in seconds, that the olsrd event scheduler should be
              set to poll. A setting of 0.2 will set olsrd to poll for events every 0.2  seconds.
              Defaults to 0.1.

       NicChgsPollInt[0.1-100.0]
              This  option  sets  the  interval, in seconds, that olsrd will check the configured
              interfaces for changes in configuration.  Defaults to 2.5.

       TcRedundancy [0|1|2]
              This value controls the TC  redundancy  used  by  the  local  node  in  TC  message
              generation.   To  enable  a more robust understanding of the topology, nodes can be
              set to announce more than just their MPR selector set in TC messages.  If set to  0
              the  advertised  link set of the node is limited to the MPR selectors.  If set to 1
              the advertised link set of the node is the  union  of  its  MPR  set  and  its  MPR
              selector  set. Finally, if set to 2 the advertised link set of the node is the full
              symmetric neighbor set of the node.  Defaults to 0.

       MprCoverage [1-]
              This value decides how many MPRs a node should attempt to select for every two  hop
              neighbor.  Defaults  to  1  ,  and  any  other  setting  will  severly  reduce  the
              optimization introduced by the MPR secheme!

       LinkQualityLevel [1-2]
              This setting decides the Link Quality scheme to use. If set to 0  link  quality  is
              not  regarded  and  olsrd  runs in "RFC3626 mode". If set to 1 link quality is used
              when calculating MPRs. If set  to  2  routes  will  also  be  calculated  based  on
              distributed link quality information.  Note that a setting of 1 or 2 breaks RFC3626
              compability!  This option should therefore only be set to 1 or 2 if such a  setting
              is used by all other nodes in the network.

       LinkQualityFishEye [0|1]
              Enables(1) or disables(0) use of the experimental Fish Eye algorithm.

       ClearScreen    [yes|no]
              If  set  to  yes  and  olsrd  is running with a debuglevel >0 the terminal to which
              output is sent(STDOUT) is cleared prior to writing updated tables.  This  makes  it
              easier to follow changes in real-time by eye. If STDOUT is not a terminal(eg. it is
              a file), then no action is taken upon writing tables to STDOUT.

OPTION BLOCKS

       Option blocks are configuration options that holds a body of sub-options  encapsulated  in
       curled braces( {} ). Valid options are:

       IpcConnect {[sub-options]}
              Olsrd  can  allow  processes  to  make  a  TCP  connection  to itself on which data
              regarding the  topology  will  be  transmitted.  This  is  typically  used  by  GUI
              applications  to  provide  a  user-friendly  front-end  to olsrd. This option block
              controls thees kind of connections.

              MaxConnections [0-5] This option specifies how  many  connections  that  can  exist
              simoultneously.  Multiple connections have not been tested, and does not work! This
              option should only be used to control wheter or not processes can connect to  olsrd
              by  setting  it either to 0, which will tell olsrd not to allow any connections, or
              by setting it to a positive value. Defaults to 0.

              Host [IPv4 address]

              This option specifies a single host that  is  allowed  to  connect  to  olsrd.   By
              default  only  the loopback address(127.0.0.1) is set to be allowed. So if you want
              to be able to connect from another host you should add it here.  This option can be
              repeated to add multiple hosts.

              Net [IPv4 netaddress] [IPv4 netmask]

              Here  you can specify an entire netrange of IP addresses which olsrd will allow TCP
              connections from. This option can be repeated to add multiple networks.

       Hna4 {[sub-options]}
              Hosts in a OLSR routed network can announce connecitivty to external networks using
              HNA  messages. This optionblock is used to set the IPv4 nteworks to be announced by
              this host.

              [IPv4 netaddress] [IPv4 netmask]

              Specifies a IPv4 network to announce in  HNA  messages.  Multiple  entries  can  be
              added. To announce Internet connectivity set 0.0.0.0 0.0.0.0

       Hna6 {[sub-options]}
              Hosts in a OLSR routed network can announce connecitivty to external networks using
              HNA messages. This optionblock is used to set the IPv6 nteworks to be announced  by
              this host.

              [IPv6 netaddress] [0-48]

              Specifies  a  IPv6  network  to  announce  in HNA messages. The second value is the
              prefix-length of the network address. Multiple entries can be  added.  To  announce
              Internet connectivity set :: 0

       LoadPlugin "[plugin-name]" {[sub-options]}
              Specifies a plugin that olsrd is to load at startup.

              PlParam [key] [value]

              Sends  a  pair  of  parameters  to the plugin at initialization. Consult individual
              plugin documentation to find the possible parameters.

       Interface "[device-name1]" "[device-name2]" ... {[sub-options]}
              This optionblock specifies one or more network interfaces  on  which  olsrd  should
              run.  Atleast  one  network  interface  block  must  be specified for olsrd to run!
              Various  parameters  can  be  specified  on  individual  interfaces  or  groups  of
              interfaces.    This   optionblock   can  be  repeated  to  add  multiple  interface
              configurations.

              AutoDetectChanges [yes|no]

              Olsrd can autodetect changes in interface configurations( polling on  the  interval
              set  by  NicChgsPollInt ). This is Enabled by default but can be turned off pr. NIC
              to save CPU cycles.

              Ip4Broadcast [IPv4 address]

              Forces the given IPv4 (broadcast) address to be used as destination address for all
              outgoing  OLSR  traffic  on  the  interface.  One  useful  example  is  the address
              255.255.255.255 Another usefule example may be to use the peer (unicast) ip  of  an
              ptp  tunnel,  olsr  shall run on.  If this option is not set, the broadcast address
              that the interface is configured with will be used.   This  address  will  also  be
              updated  in  run-time  if  a change is detected.  This feature is only available in
              linux versions!

              Mode ["mesh"|"ether"] olsrd can be used on wireless  interfaces  and  ethernet.  To
              prevent  unnecessary packet forwardings on switched ethernet interfaces the mode of
              an interface can be set to <ether.  The default value of this option is mesh.

              Ip6AddrType [site-local|global]

              This option sets what IPv6  address  type  is  to  be  used  in  interface  address
              detection. Defaults to site-local.

              Ip6MulticastSite [IPv6 address]

              Sets  the  destionation  of  outgoing  OLSR  traffic  on  this interface to use the
              specified IPv6 multicast address as destination if the site-local address  type  is
              set on this interface.

              Ip6MulticastGlobal [IPv6 address]

              Sets  the  destionation  of  outgoing  OLSR  traffic  on  this interface to use the
              specified IPv6 multicast address as destination if the global address type  is  set
              on this interface.

              HelloInterval [0.0-]

              Sets the interval on which HELLO messages will be generated and transmitted on this
              interface.

              HelloValidityTime [0.0-]

              Sets the validity time to be announced in HELLO messages generated by this host  on
              this  interface.  This value must be larger than than the HELLO generation interval
              to make any sense. Defaults to 3 * the generation interval.

              TcInterval [0.0-]

              Sets the interval on which TC messages will be generated and  transmitted  on  this
              interface.

              TcValidityTime [0.0-]

              Sets  the  validity  time  to be announced in TC messages generated by this host on
              this interface. This value must be larger than than the TC generation  interval  to
              make any sense. Defaults to 3 * the generation interval.

              MidInterval [0.0-]

              Sets  the  interval on which MID messages will be generated and transmitted on this
              interface.

              MidValidityTime [0.0-]

              Sets the validity time to be announced in MID messages generated by  this  host  on
              this  interface. This value must be larger than than the MID generation interval to
              make any sense. Defaults to 3 * the generation interval.

              HnaInterval [0.0-]

              Sets the interval on which HNA messages will be generated and transmitted  on  this
              interface.

              HnaValidityTime [0.0-]

              Sets  the  validity  time to be announced in HNA messages generated by this host on
              this interface. This value must be larger than than the HNA generation interval  to
              make any sense. Defaults to 3 * the generation interval.

              Weight [0-]

              When  multiple  links  exist  between  hosts the weight of the interface is used to
              determine the link to route by. Normally the weight is automatically calculated  by
              olsrd  based  on  the  characteristics of the interface, but here you can specify a
              fixed value. Olsrd will choose links with the lowest value.

MISC

       The homepage of olsrd is http://www.olsr.org

FILES

       /etc/olsrd.conf

SEE ALSO

       olsrd(8)

(C)2004 Andreas Tonnesen                     Mar 2009                               olsrd.conf(5)