Provided by: dahdi_2.10.2-2ubuntu1_amd64
dahdi_cfg - configures DAHDI kernel modules from /etc/dahdi/system.conf
dahdi_cfg [-c CFG_FILE] [-SNUM [-SCHANS]] [-s] [-f] [-t] [-v [-v ... ] ] dahdi_cfg -h
dahdi_cfg configures DAHDI interface cards from a config file. You generally need to run it with a valid configurations in order for DAHDI modules to work properly. It must be run to configure every DAHDI span. Normally it is run from the DAHDI init script.
-c CFG_FILE Use an alternative configuration file instead of /etc/dahdi/system.conf If CFG_FILE is '-', it is read from stdin. -C CHANNELS Only apply changes to channels in the specified range. Only applicable when -S is in use. -s Only shutdown spans. -S SPAN Only apply changes to span no. SPAN. For a digital span (with a 'span=' line in the configuration file) this will do. For an analog span you'll have to explicitly tell dahdi_cfg the range of channels, using -C . -f Always configure every channel, even if it appears not to have changed. -t Test mode. Don't do anything, just report what you wanted to do. -v Be more verbose. Add extra v-s for extra verbosity. -h Display a brief help message.
/etc/dahdi/system.conf The default location for the configuration file.
dahdi_tool(8), dahdi_monitor(8), asterisk(8).
This manual page was written by Santiago Ruano Rincón <firstname.lastname@example.org> for the Debian system (but may be used by others). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation. 16 Jun 2008 DAHDI_CFG(8)