Provided by: dahdi_2.10.2-2ubuntu1_amd64 bug

NAME

       dahdi_registration - Handle registration of Xorcom XPD modules in dahdi.

SYNOPSIS

       dahdi_registration [-v] [-s sortorder] [-R] [on|off]

DESCRIPTION

       Without parameters, show all connected XPDs sorted by physical connector order.  Each one
       is show to be unregistered (off), or registered to a specific dahdi span (the span number
       is shown).

       All registerations/deregisterations are sorted by physical connector string.

       Span registration should generally always succeed. Span unregistration may fail if
       channels from the span are in use by e.g. asterisk. In such a case you'll also see those
       channels as '(In use)' in the output of lsdahdi(8).

       dahdi_registration is intended to be used when the kernel module parameter
       xpp.dahdi_autoreg is false (and implicitly: when the module parameter
       dahdi.auto_assign_span is true). See also the NOTES section regarding
       "dahdi_span_assignments".

       If dahdi_autoreg is true, the program will normally do nothing.

   Parameters
       off -- deregisters all XPD's from dahdi.

       on -- registers all XPD's to dahdi.

   Options
       -v  verbose output.

       -R  Force operations (on/off) even if the module parameter dahdi_autoreg for xpp is
           enabled (which makes this program unneeded).

       -s sort_order
           The sort order to use.

       If the option is not used, the sort order is taken from the environment variable XBUS_SORT
       and failing that: the hard-coded default of SORT_XPPORDER.

       The available sorting orders are documented in Dahdi::Xpp manual.

   Sample Output
       An example of the output of dahdi_registration for some registered Astribanks:

         $ dahdi_registration -s type
         XBUS-01         usb:0000153     usb-0000:00:10.4-2
                 XBUS-01/XPD-00: on Span 1
                 XBUS-01/XPD-01: on Span 2
         XBUS-00         usb:0000157     usb-0000:00:10.4-4
                 XBUS-00/XPD-00: on Span 3
                 XBUS-00/XPD-01: on Span 4
                 XBUS-00/XPD-02: on Span 5
                 XBUS-00/XPD-03: on Span 6
                 XBUS-00/XPD-04: on Span 7
                 XBUS-00/XPD-05: on Span 8
                 XBUS-00/XPD-06: on Span 9
                 XBUS-00/XPD-07: on Span 10
         XBUS-02                 usb-0000:00:10.4-1
                 XBUS-02/XPD-00: on Span 11
                 XBUS-02/XPD-10: on Span 12
         # Sorted: type

FILES

       /proc/xpp/XBUS-nn/XPD-mm/dahdi_registration
           Reading from this file shows if if the if the specific XPD is registered. Writing to
           it 0 or 1 registers / unregisters the device.

           This should allow you to register / unregister a specific XPD rather than all of them.

NOTES

       dahdi_registration is intended to be used when the kernel module parameter
       xpp.dahdi_autoreg is false (and implicitly: when the module parameter
       dahdi.auto_assign_span is true), that is, Astribank devices as detected by XPP (xbus /
       xpd) do not register automatically with the DAHDI core. This tool is used to register tem
       in an explicit order. It works well, but only if you can arange for all of the Astribanks
       of the system to be available (and not already registered) at a specific point in time.

       Newer versions of DAHDI added support for registering a span to a specific span/channelss
       numbers specification. This allows registering them out of order. To use this capability,
       the module parameter dahdi.auto_assign_span should be unset (set to 0) and thus spans of
       detected DAHDI devices could be registered using "dahdi_span_assignments" (which may also
       be run automatically from a udev hook).

       In this case there is no point in delaying XPP device registration with dahdi and the
       parameter xpp.dahdi_autoreg should be set.  dahdi_registration will simply become a no-op.

SEE ALSO

       dahdi_cfg(8), dahdi_span_assignments(8).