Provided by: fdflush_22.214.171.124_amd64
fdflush - force floppy disk drive to detect disk change
Fdflush is a band-aid for a common PC hardware problem. Many PC floppy disk drives can't detect when the disk has been changed. The symptom of this problem is that when a disk is changed, the drive will continue to read buffered data from the previous disk rather than new data from the disk presently in the drive. Running fdflush makes the system believe the disk-change switch has been actuated, and the system discards the buffered blocks in response to this information. If you have one of these slightly-broken disk drives, you'll have to run fdflush every time you change a disk. The kernel uses two different ioctl commands to flush buffers. One's generic (BLKFLSBUF), one's floppy-specific (FDFLUSH). fdflush calls both, and only reports an error if noth fail.
device The name of the floppy disk device, in the form /dev/fd1 . The default is /dev/fd0 .
Zero: success, one: ioctl error, two: inability to open the floppy (or other) device, three: usage error.
They're in your hardware. Try swapping in another floppy drive to see if this problem goes away.
/dev/fdN floppy disk device.
Bruce Perens Bruce@Pixar.com .