Provided by: fence-agents_4.0.22-2_i386 bug

NAME

       fence_amt - Fence agent for AMT

DESCRIPTION

       fence_amt  is  an  I/O  Fencing agent which can be used with Intel AMT.
       This          agent          calls           support           software
       amttool(http://www.kraxel.org/cgit/amtterm/).

       fence_amt  accepts  options  on the command line as well as from stdin.
       Fenced  sends  parameters  through  stdin  when  it  execs  the  agent.
       fence_amt  can  be  run  by  itself with command line options.  This is
       useful for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.intel.com/

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -b, --boot-option=[option]
              Change   the   default   boot   behavior   of    the    machine.
              (pxe|hd|hdsafe|cd|diag)

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP address or hostname of fencing device

       -u, --ipport=[port]
              TCP/UDP  port  to use for connection with device (Default Value:
              16994)

       -m, --method=[method]
              Method to fence (onoff|cycle) (Default Value: onoff)

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[ip]
              IP address or hostname of fencing device (together with  --port-
              as-ip)

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --amttool-path=[path]
              Path to amttool binary (Default Value: /usr/bin/amttool)

       --delay=[seconds]
              Wait  X  seconds  before  fencing  is started (Default Value: 0)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after  login  (Default  Value:  5)

       --port-as-ip
              Make "port/plug" to be an alias to IP address

       --power-timeout=[seconds]
              Test  X  seconds  for status change after ON/OFF (Default Value:
              20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt  after  issuing  command  (Default
              Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --use-sudo
              Use  sudo  (without  password)  when  calling 3rd party software

       --sudo-path=[path]
              Path to sudo binary (Default Value: /usr/bin/sudo)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       boot_option
              Change   the   default   boot   behavior   of    the    machine.
              (pxe|hd|hdsafe|cd|diag)

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ipaddr IP address or hostname of fencing device

       ipport TCP/UDP  port  to use for connection with device (Default Value:
              16994)

       method Method to fence (onoff|cycle) (Default Value: onoff)

       passwd Login password or passphrase

       passwd_script
              Script to run to retrieve password

       port   IP address or hostname of fencing device (together with  --port-
              as-ip)

       verbose
              Verbose mode

       debug  Write debug information to given file

       version
              Display version information and exit

       help   Display help and exit

       amttool_path
              Path to amttool binary (Default Value: /usr/bin/amttool)

       delay  Wait  X  seconds  before  fencing  is started (Default Value: 0)

       login_timeout
              Wait X seconds for cmd prompt after  login  (Default  Value:  5)

       port_as_ip
              Make "port/plug" to be an alias to IP address

       power_timeout
              Test  X  seconds  for status change after ON/OFF (Default Value:
              20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt  after  issuing  command  (Default
              Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       sudo   Use  sudo  (without  password)  when  calling 3rd party software

       sudo_path
              Path to sudo binary (Default Value: /usr/bin/sudo)