Provided by: fence-agents_4.0.22-2_i386 bug

NAME

       fence_drac - I/O Fencing agent for Dell DRAC IV

DESCRIPTION

       fence_drac  is  an  I/O  Fencing  agent which can be used with the Dell
       Remote  Access  Card  (DRAC).  This  card  provides  remote  access  to
       controlling power to a server. It logs into the DRAC through the telnet
       interface of the card. By default, the telnet interface is not enabled.
       To enable the interface, you will need to use the racadm command in the
       racser-devel rpm available from Dell.  To enable telnet  on  the  DRAC:
       [root]#  racadm  config -g cfgSerial -o cfgSerialTelnetEnable 1 [root]#
       racadm racreset

       fence_drac accepts options on the command line as well as  from  stdin.
       Fenced  sends  parameters  through  stdin  when  it  execs  the  agent.
       fence_drac can be run by itself with command  line  options.   This  is
       useful for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.dell.com

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -c, --command-prompt=[prompt]
              Force   Python   regex   for   command  prompt  (Default  Value:
              ['\[username\]# '])

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP address or hostname of fencing device

       -u, --ipport=[port]
              TCP/UDP port to use for connection with device  (Default  Value:
              23)

       -l, --username=[name]
              Login name This parameter is always required.

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[ip]
              IP  address or hostname of fencing device (together with --port-
              as-ip)

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --delay=[seconds]
              Wait X seconds before fencing  is  started  (Default  Value:  0)

       --login-timeout=[seconds]
              Wait  X  seconds  for  cmd prompt after login (Default Value: 5)

       --port-as-ip
              Make "port/plug" to be an alias to IP address

       --power-timeout=[seconds]
              Test X seconds for status change after  ON/OFF  (Default  Value:
              20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait  X  seconds  for  cmd prompt after issuing command (Default
              Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --telnet-path=[path]
              Path to telnet binary (Default Value: /usr/bin/telnet)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       cmd_prompt
              Force  Python  regex  for   command   prompt   (Default   Value:
              ['\[username\]# '])

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ipaddr IP address or hostname of fencing device

       ipport TCP/UDP  port  to use for connection with device (Default Value:
              23)

       login  Login name This parameter is always required.

       passwd Login password or passphrase

       passwd_script
              Script to run to retrieve password

       port   IP address or hostname of fencing device (together with  --port-
              as-ip)

       verbose
              Verbose mode

       debug  Write debug information to given file

       version
              Display version information and exit

       help   Display help and exit

       delay  Wait  X  seconds  before  fencing  is started (Default Value: 0)

       login_timeout
              Wait X seconds for cmd prompt after  login  (Default  Value:  5)

       port_as_ip
              Make "port/plug" to be an alias to IP address

       power_timeout
              Test  X  seconds  for status change after ON/OFF (Default Value:
              20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt  after  issuing  command  (Default
              Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       telnet_path
              Path to telnet binary (Default Value: /usr/bin/telnet)