Provided by: fence-agents_4.0.22-2_i386 bug

NAME

       fence_hpblade - Fence agent for HP BladeSystem

DESCRIPTION

       fence_hpblade  is  an  I/O  Fencing  agent  which  can  be used with HP
       BladeSystem and HP Integrity Superdome X.  It  logs  into  the  onboard
       administrator  of  an  enclosure via telnet or ssh and uses the command
       line interface to power blades or partitions on or off.

       fence_hpblade accepts options on the  command  line  as  well  as  from
       stdin.  Fenced  sends parameters through stdin when it execs the agent.
       fence_hpblade can be run by itself with command line options.  This  is
       useful for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.hp.com

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -c, --command-prompt=[prompt]
              Force   Python   regex   for   command  prompt  (Default  Value:
              ['c7000oa>'])

       -k, --identity-file=[filename]
              Identity file (private key) for SSH

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP address or hostname  of  fencing  device  This  parameter  is
              always required.

       -u, --ipport=[port]
              TCP/UDP  port  to use for connection with device (Default Value:
              23)

       -l, --username=[name]
              Login name This parameter is always required.

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[id]
              Physical plug  number  on  device,  UUID  or  identification  of
              machine This parameter is always required.

       -x, --ssh
              Use SSH connection

       --ssh-options=[options]
              SSH options to use

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing  is  started  (Default  Value:  0)

       --login-timeout=[seconds]
              Wait  X  seconds  for cmd prompt after login (Default Value: 10)

       --missing-as-off
              Missing port returns OFF instead of failure

       --power-timeout=[seconds]
              Test X seconds for status change after  ON/OFF  (Default  Value:
              20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait  X  seconds  for  cmd prompt after issuing command (Default
              Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --ssh-path=[path]
              Path to ssh binary (Default Value: /usr/bin/ssh)

       --telnet-path=[path]
              Path to telnet binary (Default Value: /usr/bin/telnet)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List available plugs with aliases/virtual machines if  there  is
              support for more then one device. Returns N/A otherwise.

       list-status
              List  available  plugs  with  aliases/virtual machines and their
              power state if it can be obtained without  additional  commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       cmd_prompt
              Force   Python   regex   for   command  prompt  (Default  Value:
              ['c7000oa>'])

       identity_file
              Identity file (private key) for SSH

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ipaddr IP address or hostname  of  fencing  device  This  parameter  is
              always required.

       ipport TCP/UDP  port  to use for connection with device (Default Value:
              23)

       login  Login name This parameter is always required.

       passwd Login password or passphrase

       passwd_script
              Script to run to retrieve password

       port   Physical plug  number  on  device,  UUID  or  identification  of
              machine This parameter is always required.

       secure Use SSH connection

       ssh_options
              SSH options to use

       verbose
              Verbose mode

       debug  Write debug information to given file

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing  is  started  (Default  Value:  0)

       login_timeout
              Wait  X  seconds  for cmd prompt after login (Default Value: 10)

       missing_as_off
              Missing port returns OFF instead of failure

       power_timeout
              Test X seconds for status change after  ON/OFF  (Default  Value:
              20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait  X  seconds  for  cmd prompt after issuing command (Default
              Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       ssh_path
              Path to ssh binary (Default Value: /usr/bin/ssh)

       telnet_path
              Path to telnet binary (Default Value: /usr/bin/telnet)