Provided by: fence-agents_4.0.22-2_i386 bug

NAME

       fence_ilo - Fence agent for HP iLO

       fence_ilo2 - Fence agent for HP iLO2 (symlink)

DESCRIPTION

       fence_ilo  is  an  I/O  Fencing  agent  used  for  HP  servers with the
       Integrated Light Out (iLO) PCI card.The agent opens an  SSL  connection
       to  the  iLO card. Once the SSL connection is established, the agent is
       able to communicate with the iLO card through an XML stream.

       fence_ilo accepts options on the command line as well  as  from  stdin.
       Fenced  sends  parameters  through  stdin  when  it  execs  the  agent.
       fence_ilo can be run by itself with  command  line  options.   This  is
       useful for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.hp.com

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP address or hostname of fencing device

       -u, --ipport=[port]
              TCP/UDP  port  to use for connection with device (Default Value:
              443)

       -l, --username=[name]
              Login name This parameter is always required.

       -t, --notls
              Disable TLS negotiation and force SSL3.0. This  should  only  be
              used for devices that do not support TLS1.0 and up.

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[ip]
              IP  address or hostname of fencing device (together with --port-
              as-ip)

       -r, --ribcl-version=[version]
              Force ribcl version to use

       -z, --ssl
              Use SSL connection with verifying certificate (Default Value: 1)

       --ssl-insecure
              Use SSL connection without verifying certificate

       --ssl-secure
              Use SSL connection with verifying certificate

       --tls1.0
              Disable  TLS  negotiation  and force TLS1.0. This should only be
              used for devices that do not support TLS1.1 and up.

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --delay=[seconds]
              Wait X seconds before fencing  is  started  (Default  Value:  0)

       --login-timeout=[seconds]
              Wait  X  seconds  for cmd prompt after login (Default Value: 10)

       --port-as-ip
              Make "port/plug" to be an alias to IP address

       --power-timeout=[seconds]
              Test X seconds for status change after  ON/OFF  (Default  Value:
              20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait  X  seconds  for  cmd prompt after issuing command (Default
              Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 3)

       --gnutlscli-path=[path]
              Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ipaddr IP address or hostname of fencing device

       ipport TCP/UDP port to use for connection with device  (Default  Value:
              443)

       login  Login name This parameter is always required.

       notls  Disable  TLS  negotiation  and force SSL3.0. This should only be
              used for devices that do not support TLS1.0 and up.

       passwd Login password or passphrase

       passwd_script
              Script to run to retrieve password

       port   IP address or hostname of fencing device (together with  --port-
              as-ip)

       ribcl  Force ribcl version to use

       ssl    Use SSL connection with verifying certificate (Default Value: 1)

       ssl_insecure
              Use SSL connection without verifying certificate

       ssl_secure
              Use SSL connection with verifying certificate

       tls1.0 Disable TLS negotiation and force TLS1.0. This  should  only  be
              used for devices that do not support TLS1.1 and up.

       verbose
              Verbose mode

       debug  Write debug information to given file

       version
              Display version information and exit

       help   Display help and exit

       delay  Wait  X  seconds  before  fencing  is started (Default Value: 0)

       login_timeout
              Wait X seconds for cmd prompt after login  (Default  Value:  10)

       port_as_ip
              Make "port/plug" to be an alias to IP address

       power_timeout
              Test  X  seconds  for status change after ON/OFF (Default Value:
              20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt  after  issuing  command  (Default
              Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 3)

       gnutlscli_path
              Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)