Provided by: fence-agents_4.0.22-2_i386 bug

NAME

       fence_netio - I/O Fencing agent for Koukaam NETIO-230B

DESCRIPTION

       fence_netio  is an I/O Fencing agent which can be used with the Koukaam
       NETIO-230B Power Distribution Unit. It logs into device via telnet  and
       reboots  a  specified  outlet.  Lengthy  telnet  connections  should be
       avoided while a GFS cluster is  running  because  the  connection  will
       block any necessary fencing actions.

       fence_netio  accepts options on the command line as well as from stdin.
       Fenced  sends  parameters  through  stdin  when  it  execs  the  agent.
       fence_netio  can  be  run by itself with command line options.  This is
       useful for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.koukaam.se/

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP address or hostname  of  fencing  device  This  parameter  is
              always required.

       -u, --ipport=[port]
              TCP/UDP  port  to use for connection with device (Default Value:
              1234)

       -l, --username=[name]
              Login name This parameter is always required.

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[id]
              Physical plug  number  on  device,  UUID  or  identification  of
              machine This parameter is always required.

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing  is  started  (Default  Value:  0)

       --login-timeout=[seconds]
              Wait  X  seconds  for  cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after  ON/OFF  (Default  Value:
              20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait  X  seconds  for  cmd prompt after issuing command (Default
              Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --telnet-path=[path]
              Path to telnet binary (Default Value: /usr/bin/telnet)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List available plugs with aliases/virtual machines if  there  is
              support for more then one device. Returns N/A otherwise.

       list-status
              List  available  plugs  with  aliases/virtual machines and their
              power state if it can be obtained without  additional  commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ipaddr IP  address  or  hostname  of  fencing  device This parameter is
              always required.

       ipport TCP/UDP port to use for connection with device  (Default  Value:
              1234)

       login  Login name This parameter is always required.

       passwd Login password or passphrase

       passwd_script
              Script to run to retrieve password

       port   Physical  plug  number  on  device,  UUID  or  identification of
              machine This parameter is always required.

       verbose
              Verbose mode

       debug  Write debug information to given file

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait  X  seconds  before  fencing  is started (Default Value: 0)

       login_timeout
              Wait X seconds for cmd prompt after  login  (Default  Value:  5)

       power_timeout
              Test  X  seconds  for status change after ON/OFF (Default Value:
              20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt  after  issuing  command  (Default
              Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       telnet_path
              Path to telnet binary (Default Value: /usr/bin/telnet)