Provided by: fence-agents_4.0.22-2_i386 bug

NAME

       fence_rhevm - Fence agent for RHEV-M REST API

DESCRIPTION

       fence_rhevm  is an I/O Fencing agent which can be used with RHEV-M REST
       API to fence virtual machines.

       fence_rhevm accepts options on the command line as well as from  stdin.
       Fenced  sends  parameters  through  stdin  when  it  execs  the  agent.
       fence_rhevm can be run by itself with command line  options.   This  is
       useful for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.redhat.com

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP  address  or  hostname  of  fencing  device This parameter is
              always required.

       -u, --ipport=[port]
              TCP/UDP port to use for connection with device  (Default  Value:
              80)

       -l, --username=[name]
              Login name This parameter is always required.

       -t, --notls
              Disable  TLS  negotiation  and force SSL3.0. This should only be
              used for devices that do not support TLS1.0 and up.

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[id]
              Physical plug  number  on  device,  UUID  or  identification  of
              machine This parameter is always required.

       -z, --ssl
              Use SSL connection with verifying certificate

       --ssl-insecure
              Use SSL connection without verifying certificate

       --ssl-secure
              Use SSL connection with verifying certificate

       --use-cookies
              Reuse cookies for authentication

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing  is  started  (Default  Value:  0)

       --login-timeout=[seconds]
              Wait  X  seconds  for  cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after  ON/OFF  (Default  Value:
              20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 1)

       --shell-timeout=[seconds]
              Wait  X  seconds  for  cmd prompt after issuing command (Default
              Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --gnutlscli-path=[path]
              Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List available plugs with aliases/virtual machines if  there  is
              support for more then one device. Returns N/A otherwise.

       list-status
              List  available  plugs  with  aliases/virtual machines and their
              power state if it can be obtained without  additional  commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ipaddr IP  address  or  hostname  of  fencing  device This parameter is
              always required.

       ipport TCP/UDP port to use for connection with device  (Default  Value:
              80)

       login  Login name This parameter is always required.

       notls  Disable  TLS  negotiation  and force SSL3.0. This should only be
              used for devices that do not support TLS1.0 and up.

       passwd Login password or passphrase

       passwd_script
              Script to run to retrieve password

       port   Physical plug  number  on  device,  UUID  or  identification  of
              machine This parameter is always required.

       ssl    Use SSL connection with verifying certificate

       ssl_insecure
              Use SSL connection without verifying certificate

       ssl_secure
              Use SSL connection with verifying certificate

       use_cookies
              Reuse cookies for authentication

       verbose
              Verbose mode

       debug  Write debug information to given file

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing  is  started  (Default  Value:  0)

       login_timeout
              Wait  X  seconds  for  cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after  ON/OFF  (Default  Value:
              20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 1)

       shell_timeout
              Wait  X  seconds  for  cmd prompt after issuing command (Default
              Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       gnutlscli_path
              Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)