Provided by: fence-agents_4.0.22-2_i386 bug

NAME

       fence_rsa - Fence agent for IBM RSA

DESCRIPTION

       fence_rsa is an I/O Fencing agent which can be used with the IBM RSA II
       management interface. It logs into an RSA  II  device  via  telnet  and
       reboots  the  associated machine. Lengthy telnet connections to the RSA
       II device should be avoided while a GFS cluster is running because  the
       connection will block any necessary fencing actions.

       fence_rsa  accepts  options  on the command line as well as from stdin.
       Fenced  sends  parameters  through  stdin  when  it  execs  the  agent.
       fence_rsa  can  be  run  by  itself with command line options.  This is
       useful for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.ibm.com

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -c, --command-prompt=[prompt]
              Force Python regex for command  prompt  (Default  Value:  ['>'])

       -k, --identity-file=[filename]
              Identity file (private key) for SSH

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP address or hostname of fencing device

       -u, --ipport=[port]
              TCP/UDP  port  to use for connection with device (Default Value:
              23)

       -l, --username=[name]
              Login name This parameter is always required.

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[ip]
              IP address or hostname of fencing device (together with  --port-
              as-ip)

       -x, --ssh
              Use SSH connection

       --ssh-options=[options]
              SSH options to use (Default Value: -F /dev/null)

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --delay=[seconds]
              Wait  X  seconds  before  fencing  is started (Default Value: 0)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login  (Default  Value:  10)

       --port-as-ip
              Make "port/plug" to be an alias to IP address

       --power-timeout=[seconds]
              Test  X  seconds  for status change after ON/OFF (Default Value:
              20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt  after  issuing  command  (Default
              Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --ssh-path=[path]
              Path to ssh binary (Default Value: /usr/bin/ssh)

       --telnet-path=[path]
              Path to telnet binary (Default Value: /usr/bin/telnet)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       cmd_prompt
              Force  Python  regex  for  command prompt (Default Value: ['>'])

       identity_file
              Identity file (private key) for SSH

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ipaddr IP address or hostname of fencing device

       ipport TCP/UDP port to use for connection with device  (Default  Value:
              23)

       login  Login name This parameter is always required.

       passwd Login password or passphrase

       passwd_script
              Script to run to retrieve password

       port   IP  address or hostname of fencing device (together with --port-
              as-ip)

       secure Use SSH connection

       ssh_options
              SSH options to use (Default Value: -F /dev/null)

       verbose
              Verbose mode

       debug  Write debug information to given file

       version
              Display version information and exit

       help   Display help and exit

       delay  Wait X seconds before fencing  is  started  (Default  Value:  0)

       login_timeout
              Wait  X  seconds  for cmd prompt after login (Default Value: 10)

       port_as_ip
              Make "port/plug" to be an alias to IP address

       power_timeout
              Test X seconds for status change after  ON/OFF  (Default  Value:
              20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait  X  seconds  for  cmd prompt after issuing command (Default
              Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       ssh_path
              Path to ssh binary (Default Value: /usr/bin/ssh)

       telnet_path
              Path to telnet binary (Default Value: /usr/bin/telnet)