Provided by: fence-agents_4.0.22-2_i386 bug

NAME

       fence_rsb - I/O Fencing agent for Fujitsu-Siemens RSB

DESCRIPTION

       fence_rsb  is  an I/O Fencing agent which can be used with the Fujitsu-
       Siemens RSB management interface. It logs into  device  via  telnet/ssh
       and  reboots  a specified outlet. Lengthy telnet/ssh connections should
       be avoided while a GFS cluster is running because the  connection  will
       block any necessary fencing actions.

       fence_rsb  accepts  options  on the command line as well as from stdin.
       Fenced  sends  parameters  through  stdin  when  it  execs  the  agent.
       fence_rsb  can  be  run  by  itself with command line options.  This is
       useful for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.fujitsu.com

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -c, --command-prompt=[prompt]
              Force Python regex  for  command  prompt  (Default  Value:  ['to
              quit:'])

       -k, --identity-file=[filename]
              Identity file (private key) for SSH

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP address or hostname of fencing device

       -u, --ipport=[port]
              TCP/UDP  port  to use for connection with device (Default Value:
              3172)

       -l, --username=[name]
              Login name This parameter is always required.

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[ip]
              IP address or hostname of fencing device (together with  --port-
              as-ip)

       -x, --ssh
              Use SSH connection

       --ssh-options=[options]
              SSH options to use

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --delay=[seconds]
              Wait  X  seconds  before  fencing  is started (Default Value: 0)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after  login  (Default  Value:  5)

       --port-as-ip
              Make "port/plug" to be an alias to IP address

       --power-timeout=[seconds]
              Test  X  seconds  for status change after ON/OFF (Default Value:
              20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt  after  issuing  command  (Default
              Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --ssh-path=[path]
              Path to ssh binary (Default Value: /usr/bin/ssh)

       --telnet-path=[path]
              Path to telnet binary (Default Value: /usr/bin/telnet)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       cmd_prompt
              Force  Python  regex  for  command  prompt  (Default Value: ['to
              quit:'])

       identity_file
              Identity file (private key) for SSH

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ipaddr IP address or hostname of fencing device

       ipport TCP/UDP port to use for connection with device  (Default  Value:
              3172)

       login  Login name This parameter is always required.

       passwd Login password or passphrase

       passwd_script
              Script to run to retrieve password

       port   IP  address or hostname of fencing device (together with --port-
              as-ip)

       secure Use SSH connection

       ssh_options
              SSH options to use

       verbose
              Verbose mode

       debug  Write debug information to given file

       version
              Display version information and exit

       help   Display help and exit

       delay  Wait X seconds before fencing  is  started  (Default  Value:  0)

       login_timeout
              Wait  X  seconds  for  cmd prompt after login (Default Value: 5)

       port_as_ip
              Make "port/plug" to be an alias to IP address

       power_timeout
              Test X seconds for status change after  ON/OFF  (Default  Value:
              20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait  X  seconds  for  cmd prompt after issuing command (Default
              Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       ssh_path
              Path to ssh binary (Default Value: /usr/bin/ssh)

       telnet_path
              Path to telnet binary (Default Value: /usr/bin/telnet)