Provided by: ipmiutil_2.9.7-1_i386 bug

NAME

       ipmiutil_delloem - OEM commands for Dell servers

SYNOPSIS

       ipmiutil delloem [-mx -NPRUEFJTVY] commands

DESCRIPTION

       ipmiutil delloem commands is a program that uses Dell OEM IPMI commands
       to perform platform-specific functions.

OPTIONS

       -m 002000
              Show FRU for a specific MC (e.g. bus 00, sa 20, lun  00).   This
              could  be  used  for  PICMG or ATCA blade systems.  The trailing
              character, if present, indicates SMI addressing if 's', or  IPMB
              addressing if 'i' or not present.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename  or  IP  address  of  the  remote  target system.  If a
              nodename is specified, IPMI LAN interface  is  used.   Otherwise
              the local system management interface is used.

       -P/-R rmt_pswd
              Remote  password  for the nodename given.  The default is a null
              password.

       -U rmt_user
              Remote username for the nodename given.  The default is  a  null
              username.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force  the  driver  type  to one of the followng: imb, va, open,
              gnu, landesk, lan, lan2, lan2i, kcs, smb.  Note that lan2i means
              lan2  with  intelplus.   The  default is to detect any available
              driver type and use it.

       -J     Use  the  specified  LanPlus   cipher   suite   (0   thru   17):
              0=none/none/none,       1=sha1/none/none,      2=sha1/sha1/none,
              3=sha1/sha1/cbc128,  4=sha1/sha1/xrc4_128,  5=sha1/sha1/xrc4_40,
              6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use  a  specified  IPMI  LAN Authentication Type: 0=None, 1=MD2,
              2=MD5, 4=Straight Password, 5=OEM.

       -V     Use a specified IPMI  LAN  privilege  level.  1=Callback  level,
              2=User level, 3=Operator level, 4=Administrator level (default),
              5=OEM level.

       -Y     Yes, do prompt the  user  for  the  IPMI  LAN  remote  password.
              Alternatives for the password are -E or -P.

COMMANDS

       mac list
                 Lists the MAC address of LOMs

       mac get <NIC number>
                 Shows  the  MAC  address of specified LOM. 0-7 System LOM, 8-
              DRAC/iDRAC.

       lan set <Mode>
                 Sets the NIC Selection Mode (dedicated, shared,
                     shared with  failover  lom2,  shared  with  Failover  all
              loms).

       lan get
                 Returns the current NIC Selection Mode (dedicated, shared,
                  shared with failover lom2, shared with Failover all loms).

       lan get  active
                 Returns  the current active NIC (dedicated, LOM1, LOM2, LOM3,
              LOM4).

       powermonitor
                 Shows power tracking statistics

       powermonitor clear  cumulativepower
                 Reset cumulative power reading

       powermonitor clear  peakpower
                 Reset peak power reading

       powermonitor powerconsumption
                 Displays power consumption in <watt|btuphr>

       powermonitor powerconsumptionhistory  <watt|btuphr>
                 Displays power consumption history

       powermonitor getpowerbudget
                 Displays power cap in <watt|btuphr>

       powermonitor setpowerbudget  <val> <watt|btuphr|percent>
                 Allows user to set the  power cap in <watt|BTU/hr|percentage>

       powermonitor enablepowercap
                 To enable set power cap

       powermonitor disablepowercap
                 To disable set power cap

       windbg start
                 Starts the windbg session (Cold Reset & SOL Activation)

       windbg end
                 Ends the windbg session (SOL Deactivation)

       vFlash info Card
                 Shows Extended SD Card information

SEE ALSO

       ipmiutil(8)  ialarms(8)  iconfig(8)  icmd(8)  idiscover(8)   ievents(8)
       ifru(8)  igetevent(8)  ihealth(8)  ilan(8) ireset(8) isel(8) isensor(8)
       iserial(8) isol(8)

WARNINGS

       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil
       and any bug fix list.

COPYRIGHT

       Copyright (C) 2009  Kontron America, Inc.

       See  the  file  COPYING  in the distribution for more details regarding
       redistribution.

       This utility is distributed in the hope that it  will  be  useful,  but
       WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                           Version 1.0: 17 Aug 2011                IDELLOEM(8)