Provided by: ipmiutil_2.9.7-1_i386 bug

NAME

       ipmiutil_fru - show Field Replacable Unit configuration data

SYNOPSIS

       ipmiutil fru [-abcdeikmsvx -N node -U user -P/-R pswd -EFJTVY]

DESCRIPTION

       ipmiutil  fru  is  a  program  that  uses  IPMI  commands  to  show FRU
       configuration data and optionally write an asset tag  string  into  the
       FRU  data.   Setting  the  asset  tag is a function that can be used to
       uniquely identify the unit, even if the storage devices are removed  or
       changed.   This  utility  can  use  either  the  /dev/ipmi0 driver from
       OpenIPMI, the /dev/imb driver from Intel, the /dev/ipmikcs driver  from
       valinux, direct user-space IOs, or the IPMI LAN interface if -N.

OPTIONS

       Command line options are described below.

       -a asset_string
              This  option  specifies an asset tag string to be written to the
              baseboard FRU Product area.  The asset tag length is limited  by
              the  existing  FRU Product data, but is usually allowed up to 16
              characters.  The default is to not modify this FRU field.

       -b     Only show the Baseboard FRU data.  The default  behavior  is  to
              also  scan  for  any SDR FRU data or DIMM SPD data referenced by
              the SDRs.

       -c     Show FRU output in a canonical format, with a default  delimiter
              of '|'.

       -d file
              Dump binary FRU data to the specified file.

       -e     Show Every FRU output in a bladed chassis, including those under
              child MCs.  The default is to show FRUs referred to by just  the
              target MC.

       -i 00  This  option  specifies  a  specific  FRU ID to show.  The input
              value should be in hex (0b, 1a, etc.), as shown from the  sensor
              SDR  output.   By default, all FRU IDs that are specified in the
              FRU locator SDRs are shown.

       -k <setsn | setmfgdate | nextboot>
              These Kontron OEM functions set FRU data based on existing  data
              stored  elsewhere.   The  setsn  option  sets  the FRU Board and
              Product serial number, and the setmfgdate option  sets  the  FRU
              Board  Mfg  DateTime.   The  nextboot  option specifies the boot
              device for the next boot: BIOS, FDD,  HDD,  CDROM,  or  network.
              These  options  are  only supported on Kontron ATCA boards which
              have this functionality.

       -m 002000
              Show FRU for a specific MC (e.g. bus 00, sa 20, lun  00).   This
              could  be  used  for  PICMG or ATCA blade systems.  The trailing
              character, if present, indicates SMI addressing if 's', or  IPMB
              addressing if 'i' or not present.

       -s serial_num
              This  option  specifies  a serial number string to be written to
              the baseboard FRU Product area.  The serial number  can  be  any
              string  up  to 16 characters.  The default is to not modify this
              FRU field.

       -v prod_ver
              This option specifies a product  version  number  string  to  be
              written  to  the baseboard FRU Product area.  The version number
              can be any string up to 16 characters.  The default  is  to  not
              modify this FRU field.

       -x     Causes eXtra debug messages to be displayed.

       -N nodename
              Nodename  or  IP  address  of  the  remote  target system.  If a
              nodename is specified, IPMI LAN interface  is  used.   Otherwise
              the local system management interface is used.

       -U rmt_user
              Remote  username  for the nodename given.  The default is a null
              username.

       -P/-R rmt_pswd
              Remote password for the nodename given.  The default is  a  null
              password.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force  the  driver  type  to one of the followng: imb, va, open,
              gnu, landesk, lan, lan2, lan2i, kcs, smb.  Note that lan2i means
              lan2  with  intelplus.   The  default is to detect any available
              driver type and use it.

       -J     Use  the  specified  LanPlus   cipher   suite   (0   thru   17):
              0=none/none/none,       1=sha1/none/none,      2=sha1/sha1/none,
              3=sha1/sha1/cbc128,  4=sha1/sha1/xrc4_128,  5=sha1/sha1/xrc4_40,
              6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use  a  specified  IPMI  LAN Authentication Type: 0=None, 1=MD2,
              2=MD5, 4=Straight Password, 5=OEM.

       -V     Use a specified IPMI  LAN  privilege  level.  1=Callback  level,
              2=User level, 3=Operator level, 4=Administrator level (default),
              5=OEM level.

       -Y     Yes, do prompt the  user  for  the  IPMI  LAN  remote  password.
              Alternatives for the password are -E or -P.

SEE ALSO

       ipmiutil(8)   ialarms(8)  iconfig(8)  icmd(8)  idiscover(8)  ievents(8)
       igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8)
       isol(8) iwdt(8)

WARNINGS

       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil
       and any bug fix list.

COPYRIGHT

       Copyright (C) 2009  Kontron America, Inc.

       See the file COPYING in the distribution  for  more  details  regarding
       redistribution.

       This  utility  is  distributed  in the hope that it will be useful, but
       WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                           Version 1.4: 09 Sep 2010                    IFRU(8)