NAME

       LLDP-MED - Show / manipulate MED TLV configurations

SYNOPSIS

       lldptool -t -i ethx -V [ TLV_TYPE ] enableTx

       lldptool -T -i ethx -V [ TLV_TYPE ] enableTx = { yes | no }

       lldptool -T -i ethx -V LLDP-MED devtype = { class1 | class2 | class3 }

       lldptool -t -i ethx -V LLDP-MED devtype

TLV_TYPE  : = {LLDP-MED | medCap | medPolicy | medLoc | medPower | medHwRev | medFwRev | medSwRev
       | medSerNum | medManuf | medModel | medAssetID }

DESCRIPTION

       The LLDP-MED extensions support the Link  Layer  Discovery  Protocol  for  Media  Endpoint
       Devices defined in the ANSI/TIA-1057-2006 document. Each TLV can be configured as a class1
       , class2 or class3 device. Class I devices are the most basic class  of  Endpoint  Device,
       Class  II devices support media stream capabilities and Class III devices directly support
       end users of the IP communication system. See  ANS-TIA-1057  for  clarification  of  class
       types.

ARGUMENTS

       enableTx
              Enables the TLV to be transmitted

       devtype
              Set or query the class type of the device.

TLV_TYPE

       List of supported TLV specifiers applicable to Media Endpoint Devices.

       LLDP-MED
              apply arguments to all supported MED TLVs.

       medCAP LLDP-MED Capabilities TLV

       medPolicy
              LLDP-MED Network Policy TLV

       medLoc LLDP-MED Location TLV

       medPower
              LLDP-MED Extended Power-via-MDI TLV

       medHwRev
              LLDP-MED Hardware Revision TLV

       medFwRev
              LLDP-MED Firmware Revision TLV

       medSwRev
              LLDP-MED Software Revision TLV

       medSerNum
              LLDP-MED Serial Number TLV

       medManuf
              LLDP-MED Manufacturer Name TL

       medModel
              LLDP-MED Model Name TLV

       medAssetID
              LLDP-MED Asset ID TLV

EXAMPLE & USAGE

       Enable class1 MED device on eth2
              lldptool -T -i eth2 -V LLDP-MED enableTx=yes devtype=class1

       Query class type of MED on eth2
              lldptool -t -i eth2 -V LLDP-MED -c devtype

       Query transmit state of medPolicy on device eth2
              lldptool -t -i eth2 -V medPolicy -c enableTx

       SOURCE

       o      Link     Layer     Discovery     Protocol     for     Media     Endpoint    Devices
              (http://www.tiaonline.org/standards/technology/voip/documents/ANSI-
              TIA-1057_final_for_publication.pdf)

NOTES

SEE ALSO

       lldptool(8), lldpad(8)

AUTHOR

       John Fastabend