Provided by: sg3-utils_1.40-0ubuntu1_amd64
sg_safte - access SCSI Accessed Fault-Tolerant Enclosure (SAF-TE) device
sg_safte [--config] [--devstatus] [--encstatus] [--flags] [--help] [--hex] [--insertions] [--raw] [--usage] [--verbose] [--version] DEVICE
Fetches enclosure status (via a SCSI READ BUFFER command). The DEVICE should be a SAF-TE device which may be a storage array controller (INQUIRY peripheral device type 0xc) or a generic processor device (INQUIRY peripheral device type 0x3). If no options are given (only the DEVICE argument) then the overall enclosure status as reported by the option --config ®is reported.
Arguments to long options are mandatory for short options as well. The options are arranged in alphabetical order based on the long option name. -c, --config will issues a Read Enclosure Configuration ®(READ BUFFER ID 0) cdb to the device, which returns a list of the enclosure hardware resources. -d, --devstatus will issue a Read Device Slot Status ®(READ BUFFER ID 4) cdb to the device, which returns information about the current state of each drive or slot. -s, --encstatus will issue a Read Enclosure Status ®(READ BUFFER ID 1) cdb to the device, which returns the operational state of the components. -f, --flags will issue a Read Global Flags ®(READ BUFFER ID 5) cdb to the device, which read the most recent state of the global flags of the RAID processor device. -h, --help output the usage message then exit. -H, --hex output the response to a READ BUFFER command in ASCII hex to stdout. If used once, output the response to the first READ BUFFER command (i.e. with buffer_id=0). This should be the enclosure configuration. If used twice (or more often), the response to subsequent READ BUFFER commands is output. -i, --insertions will issue a Read Device Insertions ®(READ BUFFER ID 3) cdb to the device, which returns information about the number of times devices have been inserted whilst the RAID system was powered on. -r, --raw output the response to a READ BUFFER command in binary to stdout. If used once, output the response to the first READ BUFFER command (i.e. with buffer_id=0). This should be the enclosure configuration. If used twice (or more often), the response to subsequent READ BUFFER commands is output. -u, --usage will issue a Read Usage Statistics ®(READ BUFFER ID 2) cdb to the device, which returns the information on total usage time and number of power-on cycles of the RAID device. -v, --verbose increase the level of verbosity, (i.e. debug output). -V, --version print the version string and then exit.
The implementation is based on the intermediate review document eg as found at http://www.intel.com/design/servers/ipmi/saf-te.htm As the specification was never finalized this document serves as the de-facto standard. Similar functionality is provided by SPC-4 SCSI Enclosure Services devices (Peripheral device type 0xd), which can be queried with the sg_ses utility.
To view the configuration: sg_safte /dev/sg1 To view the device slot status: sg_safte --devstatus /dev/sg1
The exit status of sg_safte is 0 when it is successful. Otherwise see the sg3_utils(8) man page.
Written by Hannes Reinecke and Douglas Gilbert.
Report bugs to <dgilbert at interlog dot com>.
Copyright © 2004-2012 Hannes Reinecke and Douglas Gilbert This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
sg_inq, sg_ses (in sg3_utils package); safte-monitor (internet)