Provided by: tcpd_7.6.q-25_amd64 bug

NAME

       tcpd - access control facility for internet services

DESCRIPTION

       The tcpd program can be set up to monitor incoming requests for telnet, finger, ftp, exec,
       rsh, rlogin, tftp, talk, comsat and other services that have  a  one-to-one  mapping  onto
       executable files.

       The  program  supports  both 4.3BSD-style sockets and System V.4-style TLI.  Functionality
       may be limited when the protocol underneath TLI is not an internet protocol.

       There are two possible modes of operation: execution of tcpd before a service  started  by
       inetd,  or  linking  a  daemon  with  the  libwrap  shared  library  as  documented in the
       hosts_access(3) manual page. Operation when started by inetd is  as  follows:  whenever  a
       request  for  service  arrives,  the inetd daemon is tricked into running the tcpd program
       instead of the desired server. tcpd logs the request and does some additional checks. When
       all is well, tcpd runs the appropriate server program and goes away.

       Optional  features are: pattern-based access control, client username lookups with the RFC
       931 etc. protocol, protection against hosts that pretend to have someone elses host  name,
       and protection against hosts that pretend to have someone elses network address.

LOGGING

       Connections  that  are monitored by tcpd are reported through the syslog(3) facility. Each
       record contains a time stamp, the client host name and the name of the requested  service.
       The  information  can  be  useful  to  detect unwanted activities, especially when logfile
       information from several hosts is merged.

       In order to find out where your logs are going, examine  the  syslog  configuration  file,
       usually /etc/syslog.conf.

ACCESS CONTROL

       Optionally,  tcpd  supports  a  simple  form  of  access  control that is based on pattern
       matching.  The access-control software provides hooks for the execution of shell  commands
       when a pattern fires.  For details, see the hosts_access(5) manual page.

HOST NAME VERIFICATION

       The  authentication  scheme  of  some  protocols  (rlogin, rsh) relies on host names. Some
       implementations believe the host name that they get from any  random  name  server;  other
       implementations are more careful but use a flawed algorithm.

       tcpd  verifies  the  client  host name that is returned by the address->name DNS server by
       looking at the host name and address that are returned by the  name->address  DNS  server.
       If  any  discrepancy  is  detected,  tcpd  concludes  that  it is dealing with a host that
       pretends to have someone elses host name.

       If the sources are compiled with -DPARANOID, tcpd will drop the connection in  case  of  a
       host  name/address  mismatch.   Otherwise,  the  hostname can be matched with the PARANOID
       wildcard, after which suitable action can be taken.

HOST ADDRESS SPOOFING

       Optionally, tcpd disables source-routing socket options on every connection that it  deals
       with.  This will take care of most attacks from hosts that pretend to have an address that
       belongs to someone elses network. UDP services do not benefit from this  protection.  This
       feature must be turned on at compile time.

RFC 931

       When RFC 931 etc. lookups are enabled (compile-time option) tcpd will attempt to establish
       the name of the client user. This will succeed  only  if  the  client  host  runs  an  RFC
       931-compliant  daemon.   Client  user  name  lookups  will  not work for datagram-oriented
       connections, and may cause noticeable delays in the case of connections from PCs.

EXAMPLES

       The details of using tcpd depend on  pathname  information  that  was  compiled  into  the
       program.

EXAMPLE 1

       This  example applies when tcpd expects that the original network daemons will be moved to
       an "other" place.

       In order to monitor access to the finger service, move the original finger daemon  to  the
       "other"  place and install tcpd in the place of the original finger daemon. No changes are
       required to configuration files.

            # mkdir /other/place
            # mv /usr/sbin/in.fingerd /other/place
            # cp tcpd /usr/sbin/in.fingerd

       The example assumes that the network daemons live in /usr/sbin. On some  systems,  network
       daemons live in /usr/sbin or in /usr/libexec, or have no `in.´ prefix to their name.

EXAMPLE 2

       This example applies when tcpd expects that the network daemons are left in their original
       place.

       In order to monitor access to the finger service, perform the following edits on the inetd
       configuration file (usually /etc/inetd.conf):

            finger  stream  tcp  nowait  nobody  /usr/sbin/in.fingerd  in.fingerd

       becomes:

            finger  stream  tcp  nowait  nobody  /usr/sbin/tcpd     in.fingerd

       The  example  assumes that the network daemons live in /usr/sbin. On some systems, network
       daemons live in /usr/sbin or in /usr/libexec, the daemons have no `in.´  prefix  to  their
       name, or there is no userid field in the inetd configuration file.

       Similar  changes  will  be  needed  for the other services that are to be covered by tcpd.
       Send a `kill -HUP´ to the inetd(8) process to make the changes effective.

EXAMPLE 3

       In the case of daemons that do not live in a common  directory  ("secret"  or  otherwise),
       edit  the  inetd  configuration  file  so  that it specifies an absolute path name for the
       process name field. For example:

           ntalk  dgram  udp  wait  root  /usr/sbin/tcpd  /usr/local/lib/ntalkd

       Only the last component (ntalkd) of the pathname will  be  used  for  access  control  and
       logging.

BUGS

       Some  UDP (and RPC) daemons linger around for a while after they have finished their work,
       in case another request comes in.  In the inetd  configuration  file  these  services  are
       registered  with  the  wait  option.  Only  the request that started such a daemon will be
       logged.

       The program does not work with RPC services over TCP. These  services  are  registered  as
       rpc/tcp  in the inetd configuration file. The only non-trivial service that is affected by
       this limitation is rexd, which is used by the on(1) command. This is no  great  loss.   On
       most systems, rexd is less secure than a wildcard in /etc/hosts.equiv.

       RPC  broadcast  requests  (for example: rwall, rup, rusers) always appear to come from the
       responding host. What happens is that the client broadcasts the  request  to  all  portmap
       daemons on its network; each portmap daemon forwards the request to a local daemon. As far
       as the rwall etc.  daemons know, the request comes from the local host.

FILES

       The default locations of the host access control tables are:

       /etc/hosts.allow
       /etc/hosts.deny

SEE ALSO

       hosts_access(3), functions provided by the libwrap library.
       hosts_access(5), format of the tcpd access control tables.
       syslog.conf(5), format of the syslogd control file.
       inetd.conf(5), format of the inetd control file.

AUTHORS

       Wietse Venema (wietse@wzv.win.tue.nl),
       Department of Mathematics and Computing Science,
       Eindhoven University of Technology
       Den Dolech 2, P.O. Box 513,
       5600 MB Eindhoven, The Netherlands

                                                                                          TCPD(8)