Provided by: tiger_3.2.3-14_amd64
tiger - UNIX Security Checker
tiger [-vthqGSH] [-B dir] [-l dir|@host] [-w dir] [-b dir] [-e|-E] [-c config] [-A arch] [-O os] [-R release]
Tiger is a package consisting of Bourne Shell scripts, C code and data files which is used for checking for security problems on a UNIX system. It scans system configuration files, file systems, and user configuration files for possible security problems and reports them. The command tigexp(8) can be used to obtain explanations of the problems reported by tiger. You can configure tiger by adjusting the Tiger_ variables in the /etc/tiger/tigerrc configuration file. For each available module (see MODULES below) there is a corresponding variable in the configuration file that determines whether the module is run. All of the variables names start with Tiger_check_ and should be set equal to Y to run, or N to skip. Other configuration variables will modify the behaviour of some modules, and should be adjusted based on the operating system. The /etc/tiger/tiger.ignore configuration file defines a set of messages that will not be presented in the report even if any of the modules generate them. If the file exists, all the entries (line by line) are used as extended regular expressions that are compared against each message (notice that it will introduce some overhead which grows with the size of the file). For more information on this mechanism read the README.ignore document.
The following arguments can be used when calling the program: -B tigerdir Specify the directory where tiger is installed. If not specified, /usr/lib/tiger is used. -l logdir|@logserver Specify the name of the directory where tiger will write the security report. This defaults to /var/log/tiger. The filename of the report will be of the form 'security.report.hostname.date.time'. If the directory begins with a @, the name will be interpreted as a tiger logging server. Tiger logging's server is currently a server that listens in port (tcp) 5353 on a remote host. The tiger process will just send the results to that server using a telnet connection. -w workdir Specify a directory to use for creating scratch files. This defaults to /var/lib/tiger/work. -b bindir Specify the directory which contains (or will contain) the binaries generated from the C modules. If the systems directories contain all the binaries, they will be used directly from there. If not, then if bindir contains the binaries, these will be used. If none are found in either place, then an attempt will be made to compile the C code and install the executables into bindir. -c tigerrc Specify an alternate name for the tigerrc control file. The default is '/etc/tiger/tigerrc'. -e This option will cause explanations to be inserted into the security report following each message. This can greatly increase the size of the report, as explanations may appear repeatedly. -E This option indicates that a separate explanation report should be created, with explanations for each type of message only appearing once. The filename of the explanation report will be of the form 'explain.report.hostname.date.time'. -G Generate the signatures (MD5 hashes and file permissions) for system binary files. -H This option will format the report into HTML creating local links to the problem descriptions. -S This option indicates that a surface level check of the configuration files of any diskless clients served by this machine should be checked at the same time. The checks will not be as in depth as they would be if run on the client itself. -q Suppress messages to be as quiet as possible, only security messages will be shown. -A arch This option overrides the default value obtained for the current architecture detected by the internal configuration engine to a value defined by the user. -O os This option overrides the default value obtained for the current operating system detected by the internal configuration engine to a value defined by the user. -R release This option overrides the default value obtained for the current operating system release detected by the internal configuration engine to a value defined by the user. Notice that changing the real values for the operating system and architecture Tiger is running in might result in scripts being run which are not appropriate to it, and, as a consequence, unexpected (and potentially dangerous) errors might be generated. When executed Tiger will show which operating system, release and architecture thinks it is running in.
Tiger is composed of a series of modules. Each of these modules check specific security issues related to UNIX systems. The framework provided by Tiger allows the provision of both generic modules and those specific for the operating system the software runs in. Modules can be executed stand alone, from cron or through the tiger program (which will execute all those available). If you want to write additional modules for your system read the README.writemodules document. Tiger currently provides the following modules: check_accounts Checks the accounts provided in the system, looking for disabled accounts with cron, rhosts, .forward, and valid shells. check_aliases Performs a check for mail aliases and improper configuration. check_anonftp Determines if the anonymous FTP service is properly configured. check_cron Validates the cron entries in the system. check_embedded Determines if embedded pathnames are configured properly. check_exports Analyses configuration files for NFS exported filesystems to see if access is properly restricted. check_group Checks the UNIX groups available in the system, looking for conflicts and improper entries. check_inetd Checks the inetd configuration file: compares against services definition, valid directory paths, non-existent binaries and active services. check_known Looks for known intrusion signs including backdoors and mail spools. check_netrc Checks if users's netrc files are insecurely configured. check_nisplus Looks for wrong configuration in the NIS+ entries. check_passwd Checks the UNIX users available in the system, looking for conflicts and improper entries. check_path Validates the binaries in user's PATHs as well as PATH definitions used by scripts in order to determine insecure definitions. check_perms Check filepermissions and inconsistencies. check_printcap Analyses the configuration for the printer control file. check_rhosts Checks rhosts files in order to see if user's configuration leaves the system open to attack. check_sendmail Checks sendmail configuration files. check_signatures Compares binary files signatures against those stored in the local database (provided with the program). check_system This module calls the operating system's specific modules available at /usr/lib/tiger/systems/. check_apache Checks the Apache configuration file and reports on generic issues which might introduce exposures or vulnerabilities in the system. check_devices Checks for devices's permissions, warning about devices that have world permissions. check_exrc Analyses .exrc files that are not in user's home directories. The vi command will look for the existence of such a file in the current directory, and so may inadvertently perform commands that can compromise your system's security when starting vi or ex. check_finddeleted Checks if deleted files are being used by any process in the current system. This might be an indication of intrusion (a user executing processes and then deleting its files) or of unpatched servers (which, if not restarted use old library files and are still vulnerable). check_ftpusers Analyses the system's /etc/ftpusers and determines if the administrative users are in that file. check_issue Checks the /etc/issue and /etc/issue.net file to determine if they contain the appropriate content (this is defined in the ISSUEFILE and ISSUENETFILE). check_logfiles Checks for the existence of log files (wtmp, btmp, lastlog and utmp). It will also check for proper umask settings. check_lilo Analyses configuration files for lilo and grub boot loaders (Linux-specific). check_listeningprocs Checks for processes listening on TCP/IP sockets (servers) in the system as well as users running them. Will warn if the user running a server is not an authorised one or if the server is listening on all available interfaces. check_passwdformat Checks the format of the /etc/passwd file in order to determine inconsistencies which indicate an intrusion or misconfiguration. check_patches Checks if patches are available for the system (i.e. new packages). It will use autorpm or apt-get to check this (so this tools need to be properly configured). This check is specific to Linux (RedHat or Debian). check_root Checks if remote root login is allowed to the local system. check_rootdir Checks the permissions for the root directory. check_rootkit Tries to find systems which have been rootkited, it does so by looking for trojaned ls and find commands. It also includes a wrapper to run the chkrootkit program and format the results in Tiger's message format. check_single Checks if the system is properly configured to disallow single-user access. This check is specific to Linux. check_release Analyses the version of the operating system and determines if it is too out of date. This check is specific to Linux (RedHat or Debian). check_runprocs This module will check if the processes configured in tigerrc are running currently in the system. If any of the processes is not running, Tiger will warn the administrator (this acts as a lightweight software watchdog) check_services Check which services are configured in the system (usually in /etc/services) versus the ones that should be configured (in the provided services file) check_tcpd Tests for the existence of tcp-wrappers and changes in their configuration it also determines which services are running wrapped in tcp-wrappers. check_umask Check for umask setting in configuration files. check_xinetd Checks which xinetd services are enabled or disabled. crack_run Runs a local installation of the Crack program which can be used to determine if local user passwords are easy (or not) to guess. tripwire_run aide_run integrit_run Wrappers for a number of integrity checkers, these programs enhance the support of Tiger for MD5 and SHA-1 binary signatures and file system permission checks (implemented with the the check_perms and check_signatures scripts). You should consider installing any of these three programs (Tripwire, Aide or Integrit) and use read-only locations (such as CD-ROM) to store the hashes of the system. deb_checkadvisories This module checks against a list of stored Debian Security Advisories in order to see if the system has any package installed whose version might be subject to any security vulnerability (Debian-specific). deb_checkmd5sums Compares the MD5 sums of binary files against those provided after installation. Changes in these files might be an indication of a compromised system (Debian- specific). deb_nopackfiles Looks for files installed in the system's directories that are not provided by any installed Debian packages (Debian-specific).
/etc/tiger/tigerrc Configuration file for the Tiger tool. /etc/tiger/cronrc Configuration file for the Tigercron tool. /var/log/tiger Location of the log messages generated by Tiger when run through cron. /var/lib/tiger/work Working directory used by Tiger scripts to create temporary files. /etc/tiger/tiger.ignore Configuration file that defines which messages generated by modules will be ignored by Tiger and will not be presented in the final report.
tigexp(8) There are also a number of README files that describe in detail the behaviour of Tiger and how it can be used to setup a host-based intrusion detection system. These can be found in the top directory of the sources or in /usr/lib/tiger once it is installed (in Debian the location of the full documentation set is /usr/share/doc/tiger/)
There are a lot more things to check. Some places in the package are not shell meta-character or white-space safe. You can report or read known bugs at the http://savannah.nongnu.org/projects/tiger webpage. For Debian-specific (known) bugs read the /usr/share/doc/tiger/README.Debian document or the http://bugs.debian.org/tiger webpage.
Tiger was originally developed by a team of the Texas A&M University Supercomputer Center, as of September 1993, the development done via the Network Group, Computing & Information Services. This software was written originally by Douglas Lee Schales, Dave K. Hess, Khalid Warraich, and Dave R. Safford (circa 1993). A lot of changes were introduced by the ARSC team (a.k.a. the TARA team) Liam Forbes <lforbes at arsc.edu>, Nathan Bills <bills AT arsc.edu> and Mike Kienenberger <mkienenb at arsc.edu>, including support for quite a number of operating systems. Current upstream maintenance of Tiger is being done by Javier Fernandez-Sanguino Peña and coordinated at http://savannah.nongnu.org/projects/tiger. The adaptation for the GNU/Linux operating system was made by Robert L. Ziegler <rlz at mediaone.net> The modifications for the Debian GNU/Linux operating system have been made by Javier Fernandez-Sanguino Peña <jfs at computer.org>, including a number of checks for the GNU/Linux operating systems (check_listeningprocs) and some specific for Debian (deb_checkadvisories, deb_checkmd5sums and deb_nopackfiles).