Provided by: vzctl_4.9.4-2_amd64 bug

NAME

       vzctl - perform various operations on an OpenVZ container

SYNOPSIS

       vzctl [flags] create CTID --parameter value [...]
       vzctl [flags] start CTID [--wait] [--force] [--skip-fsck] [--skip-remount]
       vzctl [flags] stop CTID [--fast] [--skip-umount]
       vzctl [flags] restart CTID [--wait] [--force] [--fast] [--skip-fsck] [--skip-remount]
       vzctl [flags] suspend | resume CTID [--dumpfile name]
       vzctl [flags] snapshot CTID [--id uuid] [--name name] [--description desc] [--skip-
             suspend] [--skip-config]
       vzctl [flags] snapshot-switch CTID [--skip-resume | --must-resume] [--skip-config] --id
             uuid
       vzctl [flags] snapshot-delete CTID --id uuid
       vzctl [flags] snapshot-mount CTID --id uuid --target dir
       vzctl [flags] snapshot-umount CTID --id uuid
       vzctl [flags] snapshot-list CTID [-H] [-o field[,field...] [--id uuid]
       vzctl [flags] set CTID --parameter value [...]  [--save] [--force]
             [--setmode restart|ignore]
       vzctl [flags] set CTID --reset_ub
       vzctl [flags] destroy | delete | mount | umount | status | quotaon | quotaoff | quotainit
             CTID
       vzctl [flags] console CTID [ttynum]
       vzctl [flags] convert CTID [--layout ploop[:{expanded|plain|raw}]]
       vzctl [flags] compact CTID
       vzctl [flags] exec | exec2 CTID command [arg ...]
       vzctl [flags] enter CTID [--exec command [arg ...]]
       vzctl [flags] runscript CTID script
       vzctl --help | --version

DESCRIPTION

       Utility  vzctl  runs  on  the  host  system  (otherwise known as Hardware Node, or HN) and
       performs direct manipulations with containers (CTs).

       Containers can be referred to by either numeric CTID or by name (see --name option).  Note
       that  CT  ID  <= 100 are reserved for OpenVZ internal purposes. A numeric ID should not be
       more than 2147483644.

OPTIONS

   Flags
       These flags come before a command, and can be used with any command.  They affect  logging
       to console (terminal) only, and do not affect logging to a log file.

       --quiet
           Disables output. Note that scripts run by vzctl are still able to produce some output.

       --verbose
           Increments  logging  level  up  from the default. Can be used multiple times.  Default
           value is set to the value of  VERBOSE  parameter  in  the  global  configuration  file
           vz.conf(5), or to 0 if not set by VERBOSE parameter.

   Setting container parameters
       set CTID [--onboot yes|no] [--bootorder number] [--root path] [--private path]
           [--mount_opts options] [--userpasswd user:pass] [--disabled yes|no] [--name name]
           [--description string] [--ostemplate string] [--stop-timeout seconds] [--ipadd addr]
           [--ipdel addr|all] [--hostname name] [--nameserver addr] [--searchdomain name]
           [--netif_add dev[,params...]]  [--netif_del dev|all] [--ifname dev [--mac hwaddr]
           [--host_ifname dev] [--host_mac hwaddr] [--bridge name] [--mac_filter on|off]]
           [--numproc items] [--numtcpsock items] [--numothersock items] [--vmguarpages pages]
           [--kmemsize bytes] [--tcpsndbuf bytes] [--tcprcvbuf bytes] [--othersockbuf bytes]
           [--dgramrcvbuf bytes] [--oomguarpages pages] [--lockedpages pages]
           [--privvmpages pages] [--shmpages pages] [--numfile items] [--numflock items]
           [--numpty items] [--numsiginfo items] [--dcachesize bytes] [--numiptent num]
           [--physpages pages] [--swappages pages] [--ram bytes] [--swap bytes]
           [--vm_overcommit float] [--cpuunits num] [--cpulimit num] [--cpus num]
           [--cpumask cpus|auto|all] [--nodemask nodes|all] [--meminfo none|mode:value]
           [--iptables name[,...]]  [--netfilter disabled|stateless|stateful|full]
           [--netdev_add ifname] [--netdev_del ifname] [--diskquota yes|no] [--diskspace num]
           [--diskinodes num] [--quotatime seconds] [--quotaugidlimit num]
           [--capability capname:on|off[,...]]  [--devnodes param] [--devices param]
           [--pci_add dev] [--pci_del dev] [--features name:on|off[,...]]  [--applyconfig name]
           [--applyconfig_map group] [--ioprio num] [--iolimit mbps] [--iopslimit iops] [--save]
           [--force] [--reset_ub] [--setmode restart|ignore]

           This  command  sets  various  container  parameters.   If  the  container is currently
           running, vzctl applies these parameters to the container. The following options can be
           used with set command.

       Flags

       --save
           If  this  flag  is  given,  parameters  are  saved  in  container  configuration  file
           ctid.conf(5).

       --force
           If this flag is given together with --save, parameters are saved even if  the  current
           kernel  doesn't  support OpenVZ. Note this flag does not make sense without --save, so
           --save is required.

       --reset_ub
           If this flag is  given,  vzctl  applies  all  User  Beancounter  parameters  from  the
           configuration  file to a running container. This is helpful in case configuration file
           is modified manually. Please note this flag is exclusive, i.e. it can not be  combined
           with any other options or flags.

       --setmode restart | ignore
           A  few  parameters can only be applied by restarting the container.  By default, vzctl
           prints a warning if such parameters are supplied  and  a  container  is  running.  Use
           --setmode  restart together with --save flag to restart a container in such a case, or
           --setmode ignore to suppress the warning.

       Miscellaneous

       --onboot yes | no
           Sets whether the container will be started during system boot.  The container will  be
           started  on  boot  by  vz  initscript  if  either this parameter is set to yes, or the
           container was running just before last reboot, and this parameter is not  set  to  no.
           Default value is unset, meaning the container will be started if it was running before
           the last reboot.

       --bootorder number
           Sets the boot order priority for this CT. The higher the number is, the earlier in the
           boot  process  this  container  starts.  By  default this parameter is unset, which is
           considered to be the lowest priority, so containers with unset  bootorder  will  start
           last.

       --root path
           Sets  the  path to root directory (VE_ROOT) for this container.  This is essentially a
           mount point for container's root  directory.   Argument  can  contain  literal  string
           $VEID, which will be substituted with the numeric CT ID.

       --private path
           Sets  the  path  to  private  directory  (VE_PRIVATE)  for  this container.  This is a
           directory in which all the container's files are stored.  Argument can contain literal
           string $VEID, which will be substituted with the numeric CT ID.

       --mount_opts option[,option...]
           Sets  additional  mount  options  for container file system. Only applicable for ploop
           layout, ignored otherwise.

       --userpasswd user:password
           Sets password for the given user in a container, creating the  user  if  it  does  not
           exists.   Note  that  this option is not saved in configuration file at all (so --save
           flag is useless), it is applied directly to the container,  by  running  distribution-
           specific  programs inside the container.  It is not recommended to combine this option
           with any other options.

           In case  container  was  not  running,  it  is  automatically  started  then  all  the
           appropriate changes are applied, then it is stopped.

           Note that container should be created before using this option.

       --disabled yes | no
           Disable  container  start. To force the start of a disabled container, use vzctl start
           --force.

       --name name
           Add a name for a container. The name can later be used in subsequent calls to vzctl in
           place of CTID. Note this option can not be used without --save.

       --description string
           Add a textual description for a container.

       --ostemplate string
           Sets a new value of OSTEMPLATE parameter in container configuration file ctid.conf(5).
           Requires --save flag. Useful after a change/upgrade of a distribution  running  inside
           container, as vzctl uses the value of OSTEMPLATE to run distribution-specific scripts.

       --stop-timeout seconds
           Sets a time to wait for container to stop on vzctl stop before forcibly killing it, in
           seconds. Note this option can not be used without --save flag.

           Special value of 0 means to use compiled-in default.

       Networking

       --ipadd addr
           Adds an IP address addr to a given container. Address can optionally  have  a  netmask
           specified  in  the  CIDR  notation  (e.g.  10.1.2.3/25).   Note  that  this  option is
           incremental, so addr are added to already existing ones.

       --ipdel addr | all
           Removes IP address addr from a container. If you want to remove all the addresses, use
           --ipdel all.

       --hostname name
           Sets  container  hostname.  vzctl writes it to the appropriate file inside a container
           (distribution-dependent).

       --nameserver addr
           Sets DNS server IP address for a container. If you want to  set  several  nameservers,
           you  should  do  it  at once, so use --nameserver option multiple times in one call to
           vzctl, as all the name server values set in previous calls to vzctl are overwritten.

           A special value of inherit can be used to auto-propagate nameserver value(s) from  the
           host system's /etc/resolv.conf file.

       --searchdomain name
           Sets  DNS  search  domains for a container. If you want to set several search domains,
           you should do it at once, so use --searchdomain option multiple times in one  call  to
           vzctl, as all the search domain values set in previous calls to vzctl are overwritten.

           A  special  value of inherit can be used to auto-propagate search domain value(s) from
           the host system's /etc/resolv.conf file.

       --netif_add ifname[,mac,host_ifname,host_mac,bridge]
           Adds a virtual Ethernet device (veth)  to  a  given  container.  Here  ifname  is  the
           Ethernet  device  name  in  the  container, mac is its MAC address, host_ifname is the
           Ethernet device name on the host, and host_mac  is  its  MAC  address.  MAC  addresses
           should  be in the format like XX:XX:XX:XX:XX:XX. bridge is an optional parameter which
           can be used in custom network start scripts to automatically add the  interface  to  a
           bridge.  All  parameters except ifname are optional and are automatically generated if
           not specified.

       --netif_del dev_name | all
           Removes virtual Ethernet device from a container. If you want to remove  all  devices,
           use all.

       veth interface configuration

       The  following  options  can  be  used to reconfigure the already-created virtual Ethernet
       interface. To select the interface to configure, use --ifname name option.

       --mac XX:XX:XX:XX:XX:XX
              MAC address of interface inside a container.

       --host_ifname name
              interface name for virtual interface in the host system.

       --host_mac XX:XX:XX:XX:XX:XX
              MAC address of interface in the host system.

              If you want an independent communication with the Container through the bridge, you
              should specify a multicast MAC address here (FE:FF:FF:FF:FF:FF).

       --bridge name
              Bridge  name.  Custom network start scripts can use this value to automatically add
              the interface to a bridge.

       --mac_filter on | off
              Enables/disables MAC address filtering  for  the  Container  veth  device  and  the
              possibility  of  configuring  the  MAC  address  of  this  device  from  inside the
              Container. If the filtering is turned on:
               · the veth device accepts only those packets that have  a  MAC  address  in  their
              headers corresponding to that of this device (excluding all broadcast and multicast
              packets);
               · it is impossible to modify the veth MAC address from inside the Container.

              By default, this functionality is enabled for all veth devices existing inside  the
              Container.

       VSwap limits

       The  following  options  sets  memory  and  swap  limits for VSwap-enabled kernels (kernel
       version 042stab042 or greater).

       Argument is in bytes,  unless  otherwise  specified  by  an  optional  suffix.   Available
       suffixes are:

       · T, t    - terabytes;
       · G, g    - gigabytes;
       · M, m    - megabytes;
       · K, k    - kilobytes;
       · P, p    - memory pages (arch-specific, usually 4KB);
       · B, b    - bytes (this is the default).

       --ram bytes
              Sets  physical  memory  (RAM)  available to a container.  Actually, the option is a
              shortcut for setting --physpages limit (the barrier is set to 0).

       --swap bytes
              Set swap space available to a container.  Actually, the option is  a  shortcut  for
              setting --swappages limit (the barrier is set to 0).

       --vm_overcommit float
              Set  VM  overcommitment value to float. If set, it is used to calculate privmmpages
              parameter in case it is not set  explicitly  (see  below).   Default  value  is  0,
              meaning unlimited privvmpages.

       vzctl  checks  if  running  kernel  is  VSwap capable, and refuses to use these parameters
       otherwise. This behavior can be overriden by using --force flag before parameters.

       In VSwap mode, all beancounters other than RAM and swap become optional.  Note though that
       if  some  optional  beancounters  are  not  set,  they  are  calculated  and  set by vzctl
       implicitly, using the following formulae:

       · lockedpages.barrier = oomguarpages.barrier = ram

       · lockedpages.limit = oomguarpages.limit = unlimited

       · vmguarpages.barrier = vmguarpages.limit = ram + swap

       · privvmpages.barrier = privvmpages.limit = (ram + swap) * vm_overcommit

       (if vm_overcommit is 0 or not set, privvmpages is set to "unlimited")

       Here is an example of setting container 777 to have 512 megabytes of RAM and 1 gigabyte of
       swap:
          vzctl set 777 --ram 512M --swap 1G --save

       User Beancounter limits

       The following options sets barrier and limit for various user beancounters.

       Note  that  for  VSwap-enabled  kernels  (version  042stab042 or greater) these limits are
       optional, you must only set --ram and --swap (see above). For older kernels, these  limits
       are obligatory.

       Each option requires one or two arguments. In case of one argument, vzctl sets barrier and
       limit to the same value. In case of two colon-separated arguments, the first is a barrier,
       and  the second is a limit. Each argument is either a number, a number with a suffix, or a
       special value unlimited.

       Arguments are in items, pages or bytes. Note that page size is  architecture-specific,  it
       is 4096 bytes on x86 and x86_64 platforms.

       You  can also specify different suffixes for User Beancounter parameters (except for those
       which names start with num).  For example, vzctl set CTID --privvmpages 5M:6M  should  set
       privvmpages' barrier to 5 megabytes and its limit to 6 megabytes.

       Available suffixes are:

       · T, t    - terabytes;
       · G, g    - gigabytes;
       · M, m    - megabytes;
       · K, k    - kilobytes;
       · P, p    - memory pages (arch-specific, usually 4KB);
       · B, b    - bytes.

       You  can  also  specify the literal word unlimited in place of a number.  In that case the
       corresponding value will be set to LONG_MAX, i. e.  the maximum possible value.

       --numproc items[:items]
              Maximum number of processes and kernel-level threads.  Setting the barrier and  the
              limit to different values does not make practical sense.

       --numtcpsock items[:items]
              Maximum  number of TCP sockets. This parameter limits the number of TCP connections
              and, thus, the number of clients the server application  can  handle  in  parallel.
              Setting  the  barrier  and  the  limit  to different values does not make practical
              sense.

       --numothersock items[:items]
              Maximum number of non-TCP sockets (local sockets, UDP and other types of  sockets).
              Setting  the  barrier  and  the  limit  to different values does not make practical
              sense.

       --vmguarpages pages[:pages]
              Memory allocation guarantee. This parameter controls how much memory  is  available
              to  a  container. The barrier is the amount of memory that container's applications
              are guaranteed to be able to allocate.  The  meaning  of  the  limit  is  currently
              unspecified; it should be set to unlimited.

       --kmemsize bytes[:bytes]
              Maximum  amount of kernel memory used. This parameter is related to --numproc. Each
              process consumes certain amount of kernel  memory  -  16  KB  at  least,  30-50  KB
              typically.  Very  large processes may consume a bit more. It is important to have a
              certain safety gap between the barrier and  the  limit  of  this  parameter:  equal
              barrier  and  limit  may  lead  to the situation where the kernel will need to kill
              container's applications to keep the kmemsize usage under the limit.

       --tcpsndbuf bytes[:bytes]
              Maximum size of TCP send buffers.  Barrier should be  not  less  than  64  KB,  and
              difference  between  barrier  and  limit  should  be equal to or more than value of
              numtcpsock multiplied by 2.5 KB.

       --tcprcvbuf bytes[:bytes]
              Maximum size of TCP receive buffers.  Barrier should be not less than  64  KB,  and
              difference  between  barrier  and  limit  should  be equal to or more than value of
              numtcpsock multiplied by 2.5 KB.

       --othersockbuf bytes[:bytes]
              Maximum size of other (non-TCP) socket send buffers. If container's processes needs
              to  send  very  large  datagrams, the barrier should be set accordingly.  Increased
              limit is necessary for high performance  of  communications  through  local  (UNIX-
              domain) sockets.

       --dgramrcvbuf bytes[:bytes]
              Maximum  size  of  other (non-TCP) socket receive buffers. If container's processes
              needs to receive very large datagrams, the barrier should be set  accordingly.  The
              difference between the barrier and the limit is not needed.

       --oomguarpages pages[:pages]
              Guarantees  against  OOM kill. Under this beancounter the kernel accounts the total
              amount of memory and swap space used by the container's processes.  The barrier  of
              this  parameter  is the out-of-memory guarantee. If the oomguarpages usage is below
              the barrier, processes of this container are guaranteed not to be killed in out-of-
              memory situations.  The meaning of limit is currently unspecified; it should be set
              to unlimited.

       --lockedpages pages[:pages]
              Maximum number of pages acquired by mlock(2).

       --privvmpages pages[:pages]
              Allows controlling the amount of memory allocated by the applications.  For  shared
              (mapped  as MAP_SHARED) pages, each container really using a memory page is charged
              for the fraction of the page (depending on the number  of  others  using  it).  For
              "potentially  private"  pages  (mapped as MAP_PRIVATE), container is charged either
              for a fraction of the size or for the full size if the allocated address space.  In
              the latter case, the physical pages associated with the allocated address space may
              be in memory, in swap or not physically allocated yet.

              The barrier and the limit of this parameter control the upper boundary of the total
              size  of  allocated  memory.  Note that this upper boundary does not guarantee that
              container will be able to allocate that  much  memory.  The  primary  mechanism  to
              control memory allocation is the --vmguarpages guarantee.

       --shmpages pages[:pages]
              Maximum  IPC  SHM  segment  size.   Setting  the barrier and the limit to different
              values does not make practical sense.

       --numfile items[:items]
              Maximum number of open files. In most cases the barrier and the limit should be set
              to  the  same  value.  Setting  the  barrier to 0 effectively disables pre-charging
              optimization for this beancounter in the kernel, which  leads  to  the  held  value
              being precise but could slightly degrade file open performance.

       --numflock items[:items]
              Maximum number of file locks. Safety gap should be between barrier and limit.

       --numpty items[:items]
              Number  of  pseudo-terminals (PTY). Note that in OpenVZ each container can have not
              more than 255 PTYs. Setting the barrier and the limit to different values does  not
              make practical sense.

       --numsiginfo items[:items]
              Number  of  siginfo  structures.   Setting  the  barrier and the limit to different
              values does not make practical sense.

       --dcachesize bytes[:bytes]
              Maximum size of filesystem-related  caches,  such  as  directory  entry  and  inode
              caches. Exists as a separate parameter to impose a limit causing file operations to
              sense memory shortage and return an errno to applications, protecting  from  memory
              shortages  during  critical  operations that should not fail.  Safety gap should be
              between barrier and limit.

       --numiptent num[:num]
              Number of iptables (netfilter) entries.  Setting  the  barrier  and  the  limit  to
              different values does not make practical sense.

       --physpages pages[:pages]
              On VSwap-enabled kernels, this limits the amount of physical memory (RAM) available
              to a container. The barrier should be set to 0, and the limit to a  total  size  of
              RAM that can be used used by a container.

              For  older  kernels, this is an accounting-only parameter, showing the usage of RAM
              by this container. Barrier should  be  set  to  0,  and  limit  should  be  set  to
              unlimited.

       --swappages pages[:pages]
              For VSwap-enabled kernels (042stab042 or greater), this parameter limits the amount
              of swap space available to a container. The barrier should be set  to  0,  and  the
              limit to a total size of swap that can be used by a container.

              For  older  (pre-VSwap)  kernels,  the limit is used to show a total amount of swap
              space available inside the container. The barrier of this parameter is ignored. The
              default value is unlimited, meaning total swap will be reported as 0.

       CPU fair scheduler parameters

       These parameters control CPU usage by container.

       --cpuunits num
              CPU  weight  for  a  container. Argument is positive non-zero number, passed to and
              used in the kernel fair scheduler. The larger the number is, the more CPU time this
              container  gets.  Maximum  value  is  500000,  minimal is 8.  Number is relative to
              weights of all the other  running  containers.   If  cpuunits  are  not  specified,
              default value of 1000 is used.

              You  can  set  CPU  weight  for  CT0  (host system itself) as well (use vzctl set 0
              --cpuunits num). Usually, OpenVZ initscript (/etc/init.d/vz) takes care of  setting
              this.

       --cpulimit num[%]
              Limit  of  CPU  usage  for  the container, in per cent.  Note if the computer has 2
              CPUs, it has total of 200% CPU time. Default CPU limit is 0 (no CPU limit).

       --cpus num
              sets number of CPUs available in the container.

       --cpumask cpus | auto | all
              Sets list of allowed CPUs for the container.  Input  format  is  a  comma-separated
              list  of  decimal  numbers  and/or ranges.  Consecutively set bits are shown as two
              hyphen-separated decimal numbers, the smallest and largest bit numbers set  in  the
              range.   For  example, if you want the container to execute on CPUs 0, 1, 2, 7, you
              should pass 0-2,7.  Default value is all (the container can execute  on  any  CPU).
              If  used  with  the  --nodemask  option,  value  of  auto assigns all CPUs from the
              specified NUMA node to a container.

       --nodemask nodes | all
              Sets list of allowed NUMA nodes for the container. Input format is the same as  for
              --cpumask. Note that --nodemask must be used with the --cpumask option.

       Memory output parameters

       For  VSwap-enabled  kernels (042stab042 or greater), this parameter is ignored.  For older
       kernels, it controls the output of /proc/meminfo inside a container.

       --meminfo none
              No /proc/meminfo virtualization (the same as on host system).

       --meminfo mode:value
              Configure total memory output in a container. Reported  free  memory  is  evaluated
              accordingly  to  the  mode  being  set. Reported swap is evaluated according to the
              settings of --swappages parameter.

              You can use the following modes for mode:
               · pages:value - sets total memory in pages;
               · privvmpages:value - sets total memory as privvmpages * value.

              Default is privvmpages:1.

       Netfilter (iptables) control parameters

       --netfilter disabled|stateless|stateful|full
              Restrict access  to  netfilter/iptables  modules  for  a  container.   This  option
              replaces obsoleted --iptables.

              Note  that  changing  this  parameter requires container restart, so consider using
              --setmode option.

              The following arguments can be used:

              · disabled
                     no modules are allowed

              · stateless
                     all modules except NAT and conntracks are allowed (i.e. filter and  mangle);
                     this is the default

              · stateful
                     all modules except NAT are allowed

              · full all modules are allowed

       --iptables name[,...]
              Note this option is obsoleted, --netfilter should be used instead.

              Allow  to  use  the  functionality  of  name  iptables module inside the container.
              Multiple comma-separated names can be specified.

              The default list of enabled iptables modules is defined by the IPTABLES variable in
              vz.conf(5).

              You  can  use  the  following  values  for  name:  iptable_filter,  iptable_mangle,
              ipt_limit, ipt_multiport, ipt_tos,  ipt_TOS,  ipt_REJECT,  ipt_TCPMSS,  ipt_tcpmss,
              ipt_ttl,  ipt_LOG,  ipt_length,  ip_conntrack,  ip_conntrack_ftp, ip_conntrack_irc,
              ipt_conntrack,  ipt_state,   ipt_helper,   iptable_nat,   ip_nat_ftp,   ip_nat_irc,
              ipt_REDIRECT, xt_mac, ipt_recent, ipt_owner.

       Network devices control parameters

       --netdev_add name
              move network device from the host system to a specified container

       --netdev_del name
              delete network device from a specified container

       Disk quota parameters

       --diskquota yes | no
              allows  to enable or disable disk quota for a container. By default, a global value
              (DISK_QUOTA) from vz.conf(5) is used.

              Note that this parameter is ignored for ploop layout.

       --diskspace num[:num]
              For simfs layout, sets soft and hard disk quota limits.  First  parameter  is  soft
              limit, second is hard limit.

              For  ploop  layout, initiates the procedure of resizing the ploop image file to the
              new size. Since there is no soft/hard  limit  concept  in  ploop,  second  num,  if
              specified, is ignored.

              By  default,  ploop  resize  is  done  online,  i.e. on a mounted ploop.  This is a
              preferred way of doing resize. Although, in a rare case a container was using  lots
              of  disk  space and should now be resized to a much smaller size, an offline resize
              might be more appropriate.  In this case, make sure the container  is  stopped  and
              unmounted and use additional --offline-resize option

              Note  that  ploop  resize  is  NOT performed on container start, so for consistency
              --diskspace must be used together with --save flag.

              Suffixes G, M, K can also be specified (see Resource limits section for  more  info
              on suffixes).  If suffix is not specified, value is in kilobytes.

       --diskinodes num[:num]
              sets  soft  and  hard disk quota limits, in i-nodes. First parameter is soft limit,
              second is hard limit.

              Note that this parameter is ignored for ploop layout.

       --quotatime seconds
              sets quota grace period. Container is permitted to exceed its soft limits  for  the
              grace period, but once it has expired, the soft limit is enforced as a hard limit.

              Note that this parameter is ignored for ploop layout.

       --quotaugidlimit num
              Enables  or disables in-container per-user and per-group disk quotas.  If the value
              is set to 0 or not set, disk quotas  inside  the  container  is  disabled  and  not
              accounted.

              For  simfs  layout containers, non-zero value sets maximum number of user/group IDs
              for which disk quota is accounted.

              For ploop layout containers, any non-zero  value  enables  disk  quota  inside  the
              container;  the  number  of  user/group  IDs  used  by disk quota is not limited by
              OpenVZ.

              Note that  enabling  or  disabling  in-container  disk  quotas  requires  container
              restart, so consider using --setmode option.

       Capability option

       --capability capname:on|off[,...]
              Sets  a  capability  for  a container. Multiple comma-separated capabilities can be
              specified.

              Note that setting a  capability  when  the  container  is  running  does  not  take
              immediate  effect;  restart  the  container in order for the changes to take effect
              (consider using --setmode option).

              A container has the default set of capabilities, thus any operation on capabilities
              is "logical AND" with the default capability mask.

              You can use the following values for capname: chown, dac_override, dac_read_search,
              fowner, fsetid, kill, setgid, setuid, setpcap,  linux_immutable,  net_bind_service,
              net_broadcast,  net_admin,  net_raw,  ipc_lock,  ipc_owner,  sys_module, sys_rawio,
              sys_chroot, sys_ptrace, sys_pacct,  sys_admin,  sys_boot,  sys_nice,  sys_resource,
              sys_time,   sys_tty_config,   mknod,   lease,   setveid,   ve_admin.  For  detailed
              description, see capabilities(7).

              WARNING: setting  some  of  those  capabilities  may  have  far  reaching  security
              implications,  so  do  not do it unless you know what you are doing. Also note that
              setting setpcap:on for a container will most probably lead to  inability  to  start
              it.

       Device access management

       --devnodes device:[r][w][q]|none
              Give  the container an access (r - read, w - write, q - disk quota management, none
              - no access) to a device designated by the special file /dev/device. Device file is
              created in a container by vzctl. Example:
                 vzctl set 777 --devnodes sdb:rwq

       --devices b|c:major:minor|all:[r][w][q]|none
              Give the container an access to a block or character device designated by its major
              and minor numbers. Device file have to be created manually.

       PCI device management

       --pci_add [domain:]bus:slot.func
              Give the container an access to a specified PCI device. All numbers are hexadecimal
              (as printed by lspci(8) in the first column).

       --pci_del [domain:]bus:slot.func
              Delete a PCI device from the container.

              Note  that  vps-pci  configuration script is executed by vzctl then configuring PCI
              devices. The script is usually located at /usr/lib/vzctl/vzctl/scripts/.

       Features management

       --features name:on|off[,...]
              Enable or disable a specific container feature.  Known features  are:  sysfs,  nfs,
              sit,  ipip,  ppp,  ipgre,  bridge,  nfsd.  A few features can be specified at once,
              comma-separated.

       Apply config

       --applyconfig name
              Read  container  parameters  from   the   container   sample   configuration   file
              /etc/vz/conf/ve-name.conf-sample,  and  apply them, if --save option specified save
              to the container config file.  The following parameters are not changed:  HOSTNAME,
              IP_ADDRESS, OSTEMPLATE, VE_ROOT, and VE_PRIVATE.

       --applyconfig_map group
              Apply  container  config  parameters selected by group. Now the only possible value
              for group is name: to restore container name based on NAME  variable  in  container
              configuration file.

       I/O scheduling

       --ioprio priority
              Assigns  disk  I/O  priority  to  container.  Priority  range  is 0-7.  The greater
              priority is, the more time  for  I/O  activity  container  has.   By  default  each
              container has priority of 4.

       --iolimit limit[B|K|M|G]
              Assigns  disk I/O bandwidth limit for a container. Value is either a number with an
              optional suffix, or a literal string unlimited.  Value of 0 means  "unlimited".  By
              default  a  container  has  no I/O limit.  Maximum allowed limit is 2 gigabytes per
              second; values exceeding the limit are truncated.

              If no suffix is provided, the limit is assumed  to  be  in  megabytes  per  second.
              Available suffixes are:
              · b, B -- bytes per second;
              · k, K -- kilobytes per second;
              · m, M -- megabytes per second (default);
              · g, G -- gigabytes per second;

       --iopslimit iops
              Assigns  IOPS  limit  for  a  container,  in  number of input/output operations per
              second. Value is a number  or  a  literal  string  unlimited.   Value  of  0  means
              "unlimited". By default a container has no IOPS limit.

   Suspending and resuming
       Checkpointing  is  a  feature  of  OpenVZ kernel which allows to save a complete in-kernel
       state of a running container, and to restore it later.

       suspend|chkpnt CTID [--dumpfile name]
           This command suspends a container to a dump file If an option --dumpfile is  not  set,
           default dump file name /var/lib/vz/dump/Dump.CTID is used.

       resume|restore CTID [--dumpfile name]
           This command restores a container from the dump file created by the suspend command.

   Snapshotting
       Snapshotting is a feature based on checkpointing and ploop shapshots.  It allows to save a
       complete state of container file system. Plus, if the container is running, it's in-memory
       state  (as  in  checkpointing).   Note  that  snapshot  functionality  is only working for
       containers on ploop device.

       snapshot CTID [--id uuid] [--name name]  [--description  desc]  [--skip-suspend]  [--skip-
       config]
           Creates  a  container  snapshot, i.e. saves the current container state, including its
           file system state, running processes state, and configuration file.

           If a container is running, and --skip-suspend option is not specified, a container  is
           checkpointed and then restored, and CT memory dump becomes the part of snapshot.

           Unless  --skip-config  option  is  given, container configuration file is saved to the
           snapshot.

           If uuid is not specified, it is auto-generated.  Options --name and --description  can
           be  used to specify the snapshot name and description, respectively. Name is displayed
           by snapshot-list.

       snapshot-switch CTID [--skip-resume | --must-resume] [--skip-config] --id uuid
           Switches the container to a snapshot identified by uuid,  restoring  its  file  system
           state, configuration (if available) and its running state (if available).

           Note  that  the  current state of a container (including its file system state and its
           configuration file) is lost!

           Option --skip-resume is used to ignore a CT memory dump  file  in  a  snapshot,  as  a
           result  the  container will end up being in a stopped state (same as if a snapshot has
           been taken with --skip-suspend).

           If option --must-resume is set, absense of a memory dump is treated as an  error,  and
           the  inability  to  restore  from  the  memory dump is treated as an error rather than
           warning.

           Option option --skip-config is used to ignore the CT configuration file in a snapshot,
           i.e. the current configuration file will be left as is.

       snapshot-delete CTID --id uuid
           Removes a specified snapshot.

       snapshot-mount CTID --id uuid --target directory
           Mounts a snapshot specified by uuid to a directory. Note this mount is read-only.

       snapshot-umount CTID --id uuid
           Unmounts a specified snapshot.

       snapshot-list CTID [-H] [-o field[,field...] [--id uuid]
           List container's snapshots.

           You can suppress displaying header using -H option.

           You  can  use the -o option to display only the specified field(s).  List of available
           fields can be obtained using -L option.

   Performing container actions
       create CTID [--ostemplate name] [--config name]
              [--layout simfs|ploop[:{expanded|plain|raw}]] [--diskspace kbytes]
              [--diskinodes num] [--private path] [--root path] [--ipadd addr] [--hostname name]
              [--name name] [--local_uid uid] [--local_gid gid]

           Creates  a  new  container  area. This operation should be done once, before the first
           start of the container.

           By default, an OS template denoted by DEF_OSTEMPLATE parameter of vz.conf(5)  is  used
           to create a container. This can be overwritten by --ostemplate option.

           By  default, a new container configuration file is created from a sample configuration
           denoted by value of CONFIGFILE parameter of vz.conf(5). If the container configuration
           file already exists, it will not be modified.

           The  value  of  CONFIGFILE  can be overwritten by using the --config name option. This
           option can not be used if the container configuration file already exists.

           A new container can either be created using simfs filesystem or on a ploop device. The
           default is set by value of VE_LAYOUT parameter of vz.conf(5) and can be overwritten by
           --layout option. In case ploop is used, one can additionally specify ploop disk  image
           format  after  a colon. Possible ploop formats are expanded, plain and raw. Default is
           expanded.  Using value other than expanded is not recommended  and  is  currently  not
           supported.

           You  can  use  --diskspace  and  --diskinodes options to specify container file system
           size. Note that for ploop layout, you will not be able to change inodes value later.

           If DISKSPACE is not specified  either  in  the  sample  configuration  file  used  for
           creation or in global configuration file vz.conf(5), --diskspace parameter is required
           for ploop layout.

           Suffixes G, M, K can also be specified (see Resource limits section for more  info  on
           suffixes).

           You  can  use --root path option to sets the path to the mount point for the container
           root directory (default is VE_ROOT specified in vz.conf(5) file). Argument can contain
           literal string $VEID, which will be substituted with the numeric CT ID.

           You  can use --private path option to set the path to directory in which all the files
           and directories specific to this very container  are  stored  (default  is  VE_PRIVATE
           specified  in vz.conf(5) file).  Argument can contain literal string $VEID, which will
           be substituted with the numeric CT ID.

           You can use --ipadd addr option to assign an IP address to a container. Note that this
           option can be used multiple times.

           You can use --hostname name option to set a host name for a container.

           When running with an upstream Linux Kernel that supports user namespaces (>= 3.8), the
           parameters --local_uid and --local_gid can  be  used  to  select  which  uid  and  gid
           respectively will be used as a base user in the host system. Note that user namespaces
           provide a 1:1 mapping between container users and host users. If these options are not
           specified,   the  values  LOCAL_UID  and  LOCAL_GID  from  global  configuration  file
           vz.conf(5) are used. An explicit --local_uid value of 0 will  disable  user  namespace
           support,  and  run  the  container  as a privileged user. In this case, --local_gid is
           ignored.

           Warning:  use  --local_uid  and  --local_gid  with  care,  specially  when   migrating
           containers.  In  all  situations,  the container's files in the filesystem needs to be
           correctly owned by the host-side users.

       destroy | delete CTID
           Removes  a  container  private  area  by  deleting  all  files,  directories  and  the
           configuration file of this container.

       start CTID [--wait] [--force] [--skip-fsck] [--skip-remount]
           Mounts (if necessary) and starts a container. Unless --wait option is specified, vzctl
           will return immediately; otherwise an attempt to wait till  the  default  runlevel  is
           reached will be made by vzctl.

           Specify --force if you want to start a container which is disabled (see --disabled).

           Specify  --skip-fsck to skip fsck for ploop-based container filesystem (this option is
           used by vz initscript).

           By default, if a container to  be  started  happens  to  be  already  mounted,  it  is
           unmounted  and  mounted again. This behavior can be turned off by using --skip-remount
           flag.

           Note that this command can lead to execution  of  premount,  mount  and  start  action
           scripts (see ACTION SCRIPTS below).

       stop CTID [--fast] [--skip-umount]
           Stops  a container and unmounts it (unless --skip-umount is given).  Normally, halt(8)
           is executed inside a container;  option  --fast  makes  vzctl  use  reboot(2)  syscall
           instead which is faster but can lead to unclean container shutdown.

           Note  that  vzctl  stop is not asyncronous, in other words vzctl waits for container's
           init to exit (unless --fast is given), which can take up to  a  few  minutes.  Default
           wait  timeout  is  120 seconds; it can be changed globally, by setting STOP_TIMEOUT in
           vz.conf(5), or per container (STOP_TIMEOUT in ctid.conf(5), see --stop-timeout).

           Note that this command can lead to execution of stop,  umount  and  postumount  action
           scripts (see ACTION SCRIPTS below).

       restart CTID [--wait] [--force] [--fast] [--skip-fsck]
           Restarts  a  container, i.e. stops it if it is running, and starts again.  Accepts all
           the start and stop options.

           Note that this command can lead to  execution  of  some  action  scripts  (see  ACTION
           SCRIPTS below).

       status CTID
           Shows a container status. This is a line with five or six words, separated by spaces.

           First word is literally CTID.

           Second word is the numeric CT ID.

           Third  word is showing whether this container exists or not, it can be either exist or
           deleted.

           Fourth word is showing the status of  the  container  filesystem,  it  can  be  either
           mounted or unmounted.

           Fifth word shows if the container is running, it can be either running or down.

           Sixth  word,  if  exists, is suspended. It appears if a dump file exists for a stopped
           container (see suspend).

           This command can also be usable from scripts.

       mount CTID
           Mounts container private area. Note  that  this  command  can  lead  to  execution  of
           premount and mount action scripts (see ACTION SCRIPTS below).

       umount CTID
           Unmounts  container  private  area.  Note  that  this command can lead to execution of
           umount and postumount action scripts (see ACTION SCRIPTS below).

           Note that stop does umount automatically.

       convert CTID [--layout ploop[:{expanded|plain|raw}]]
           Convert CT private area to reside on a  ploop  device  (available  in  kernel  version
           042stab052.8 and greater). Conversion should be performed when a container is stopped,
           plus disk space quota should be set.

       compact CTID
           Compact container image. This only makes sense for ploop layout.

       quotaon CTID
           Turn disk quota on. Not that mount and start does that automatically.

       quotaoff CTID
           Turn disk quota off. Not that umount and stop does that automatically.

       quotainit CTID
           Initialize disk quota (i.e. run vzquota init) with the parameters taken  from  the  CT
           configuration file ctid.conf(5).

       exec CTID command
           Executes  command  in  a  container.  Environment  variables  are  not  set inside the
           container.  Signal handlers may  differ  from  default  settings.  If  command  is  -,
           commands are read from stdin.

       exec2 CTID command
           The same as exec, but return code is that of command.

       runscript CTID script
           Run  specified  shell  script  in the container. Argument script is a file on the host
           system which contents is read by vzctl and executed in the context of  the  container.
           For a running container, the command jumps into the container and executes the script.
           For a stopped container, it enters the container, mounts container's root  filesystem,
           executes  the  script,  and unmounts CT root. In the latter case, the container is not
           really started, no file systems other than  root  (such  as  /proc)  are  mounted,  no
           startup  scripts are executed etc. Thus the environment in which the script is running
           is far from normal and is only usable for very basic operations.

       enter CTID [--exec command [arg ...]]
           Enters into a container (giving a container's root shell). This option is a  back-door
           for host root only. The proper way to have CT root shell is to use ssh(1).

           Option  --exec  is  used  to run command with arguments after entering into container.
           This is useful if command to be run requires a terminal (so  vzctl  exec  can  not  be
           used) and for some reason you can not use ssh(1).

           You  need  to log out manually from the shell to finish session (even if you specified
           --exec).

       console CTID [ttynum]
           Attach to a container console. Optional ttynum argument is tty number (such as  4  for
           tty4), default is 1 which is used for container's /dev/console.

           Note the consoles are persistent, meaning that:
           · it can be attached to even if the container is not running;
           · there is no automatic detachment upon the container stop;
           · detaching from the console leaves anything running in this console as is.

           The  following  escape  sequences  are  recognized  by vzctl console.  Note that these
           sequences are only recognized at the beginning of a line.

           · Esc then . to detach from the console.

           · Esc then ! to kill anything running on the console (SAK). This is helpful  when  one
           expects a login prompt but there isn't one.

   Other options
       --help
           Prints help message with a brief list of possible options.

       --version
           Prints vzctl version.

ACTION SCRIPTS

       vzctl  has an ability to execute user-defined scripts when a specific vzctl command is run
       for a container. The following vzctl commands can trigger  execution  of  action  scripts:
       start, stop, restart, mount and umount.

       Action  scripts  are  located  in the /etc/vz/conf/ directory. There are global and per-CT
       scripts. Global scripts have a literal prefix of vps. and are executed for all containers.
       Per-CT scripts have a CTID. numeric prefix and are executed for the given container only.

       Please  note  scripts  are  executed in a host system (CT0) context, with the exception of
       .start and .stop scripts, which are executed in a container context.

       The following action scripts are currently defined:

       vps.premount, CTID.premount
              Global and per-CT mount scripts which are executed for a  container  before  it  is
              mounted.  Scripts  are  executed  in the host system context, while a CT is not yet
              mounted or running. Global script, if exists, is executed first.

       vps.mount, CTID.mount
              Global and per-CT mount scripts which are executed for a container right  after  it
              is mounted. Otherwise they are the same as .premount scripts.

       CTID.start
              Right  after  vzctl has started a container, it executes this script in a container
              context.

       CTID.stop
              Right before vzctl has stopped a container, it executes this script in a  container
              context.

       vps.umount, CTID.umount
              Global  and  per-CT  umount scripts which are executed for a container before it is
              unmounted. Scripts are executed in the host system context, while a CT is  mounted.
              Global script, if exists, is executed first.

       vps.postumount, CTID.postumount
              Global  and per-CT umount scripts which are executed for a container right after it
              is unmounted. Otherwise they are the same as .umount scripts.

       The environment passed to all the *mount scripts is the standard environment of the parent
       (i.e.  vzctl)  with  two additional variables: $VEID and $VE_CONFFILE. The first one holds
       the ID of the container, and  the  second  one  holds  the  full  path  to  the  container
       configuration  file. If the script needs to get other CT configuration parameters, such as
       $VE_ROOT, it needs to get those from global and per-CT configuration files.

       Here is an example of a mount script, which makes host  system's  /mnt/disk  available  to
       container(s). Script name can either be /etc/vz/conf/vps.mount or /etc/vz/conf/CTID.mount.

          # If one of these files does not exist then something
          # is really broken
          [ -f /etc/vz/vz.conf ] || exit 1
          [ -f $VE_CONFFILE ] || exit 1
          # Source both files. Note the order is important.
          . /etc/vz/vz.conf
          . $VE_CONFFILE
          SRC=/mnt/disk
          DST=/mnt/disk
          mount -n -t simfs $SRC ${VE_ROOT}${DST} -o $SRC

EXIT STATUS

       Returns 0 upon success, or an appropriate error code in case of an error:

       1      Failed to set a UBC parameter

       2      Failed to set a fair scheduler parameter

       3      Generic system error

       5      The running kernel is not an OpenVZ kernel (or some OpenVZ modules are not loaded)

       6      Not enough system resources

       7      ENV_CREATE ioctl failed

       8      Command executed by vzctl exec returned non-zero exit code

       9      Container is locked by another vzctl invocation

       10     Global OpenVZ configuration file vz.conf(5) not found

       11     A vzctl helper script file not found

       12     Permission denied

       13     Capability setting failed

       14     Container configuration file ctid.conf(5) not found

       15     Timeout on vzctl exec

       16     Error during vzctl suspend

       17     Error during vzctl resume

       18     Error from setluid() syscall

       20     Invalid command line parameter

       21     Invalid value for command line parameter

       22     Container root directory (VE_ROOT) not set

       23     Container private directory (VE_PRIVATE) not set

       24     Container template directory (TEMPLATE) not set

       28     Not all required UBC parameters are set, unable to start container

       29     OS template is not specified, unable to create container

       31     Container not running

       32     Container already running

       33     Unable to stop container

       34     Unable to add IP address to container

       40     Container not mounted

       41     Container already mounted

       43     Container private area not found

       44     Container private area already exists

       46     Not enough disk space

       47     Bad/broken container (/sbin/init or /bin/sh not found)

       48     Unable to create a new container private area

       49     Unable to create a new container root area

       50     Unable to mount container

       51     Unable to unmount container

       52     Unable to delete a container

       53     Container private area not exist

       60     vzquota on failed

       61     vzquota init failed

       62     vzquota setlimit failed

       63     Parameter DISKSPACE not set

       64     Parameter DISKINODES not set

       65     Error setting in-container disk quotas

       66     vzquota off failed

       67     ugid quota not initialized

       71     Incorrect IP address format

       74     Error changing password

       78     IP address already in use

       79     Container action script returned an error

       82     Config file copying error

       86     Error setting devices (--devices or --devnodes)

       89     IP address not available

       91     OS template not found

       99     Ploop is not supported by either the running kernel or vzctl.

       100    Unable to find container IP address

       104    VE_NETDEV ioctl error

       105    Container start disabled

       106    Unable to set iptables on a running container

       107    Distribution-specific configuration file not found

       109    Unable to apply a config

       129    Unable to set meminfo parameter

       130    Error setting veth interface

       131    Error setting container name

       133    Waiting for container start failed

       139    Error saving container configuration file

       148    Error setting container IO parameters (ioprio)

       150    Ploop image file not found

       151    Error creating ploop image

       152    Error mounting ploop image

       153    Error unmounting ploop image

       154    Error resizing ploop image

       155    Error converting container to ploop layout

       156    Error creating ploop snapshot

       157    Error merging ploop snapshot

       158    Error deleting ploop snapshot

       159    Error switching  ploop snapshot

       166    Error compacting ploop image

       167    Error listing ploop snapsots

EXAMPLES

       To  create  and  start "basic" container with ID of 1000 using centos-5 OS template and IP
       address of 192.168.10.200:

          vzctl create 1000 --ostemplate centos-5 --config basic
          vzctl set 1000 --ipadd 192.168.10.200 --save
          vzctl start 1000

       To set number of processes barrier/limit to 80/100, and PTY barrier/limit to 16/20 PTYs:

          vzctl set 1000 --numproc 80:100 -t 16:20 --save

       To execute command ls -la in this container:

          vzctl exec 1000 /bin/ls -la

       To execute command pipe ls -l / | sort in this container:

          vzctl exec 1000 'ls -l / | sort'

       To enter this container and execute command apt-get install vim:

          vzctl enter 1000 --exec apt-get install vim

       Note that in the above example you will need to log out from the container's  shell  after
       apt-get finishes.

       To  enter  this container, execute command apt-get install vim and logout after successful
       installation (or stay inside the container if installation process failed) use &&:

          vzctl enter 1000 --exec "apt-get install vim && logout"

       To enter this container, execute command apt-get install vim and logout  independently  of
       exit code of installation process use ;:

          vzctl enter 1000 --exec "apt-get install vim ; logout"

       Note that you need to quote the command if you use && or ;.

       To stop this container:

          vzctl stop 1000

       To permanently remove this container:

          vzctl destroy 1000

FILES

       /etc/vz/vz.conf
       /etc/vz/conf/CTID.conf
       /etc/vz/conf/vps.{premount,mount,umount,postumount}
       /etc/vz/conf/CTID.{premount,mount,start,stop,umount,postumount}
       /proc/vz/veinfo
       /proc/vz/vzquota
       /proc/user_beancounters
       /proc/bc/*
       /proc/fairsched

SEE ALSO

       vz.conf(5),  ctid.conf(5), arpsend(8), vzcalc(8), vzcfgvalidate(8), vzcpucheck(8), vzifup-
       post(8),  vzlist(8),  vzmemcheck(8),  vzmigrate(8),  vzpid(8),   vzquota(8),   vzsplit(8),
       vzubc(8), http://wiki.openvz.org/UBC.

LICENSE

       Copyright (C) 2000-2013, Parallels, Inc. Licensed under GNU GPL.