Provided by: network-manager_1.4.2-2ubuntu4_amd64 bug

NAME

       nmcli-examples - usage examples of nmcli

SYNOPSIS

       nmcli [OPTIONS...]

DESCRIPTION

       nmcli is a command-line client for NetworkManager. It allows
       controlling NetworkManager and reporting its status. For more
       information please refer to nmcli(1) manual page.

       The purpose of this manual page is to provide you with various examples
       and usage scenarios of nmcli.

EXAMPLES

       Example 1. Listing available Wi-Fi APs

           $ nmcli device wifi list
           *  SSID               MODE    CHAN  RATE       SIGNAL  BARS  SECURITY
              netdatacomm_local  Infra   6     54 Mbit/s  37      ▂▄__  WEP
           *  F1                 Infra   11    54 Mbit/s  98      ▂▄▆█  WPA1
              LoremCorp          Infra   1     54 Mbit/s  62      ▂▄▆_  WPA2 802.1X
              Internet           Infra   6     54 Mbit/s  29      ▂___  WPA1
              HPB110a.F2672A     Ad-Hoc  6     54 Mbit/s  22      ▂___  --
              Jozinet            Infra   1     54 Mbit/s  19      ▂___  WEP
              VOIP               Infra   1     54 Mbit/s  20      ▂___  WEP
              MARTINA            Infra   4     54 Mbit/s  32      ▂▄__  WPA2
              N24PU1             Infra   7     11 Mbit/s  22      ▂___  --
              alfa               Infra   1     54 Mbit/s  67      ▂▄▆_  WPA2
              bertnet            Infra   5     54 Mbit/s  20      ▂___  WPA1 WPA2

       This command shows how to list available Wi-Fi networks (APs). You can
       also use --fields option for displaying different columns.  nmcli -f
       all dev wifi list will show all of them.

       Example 2. Showing general information and properties for a Wi-Fi
       interface

           $ nmcli -p -f general,wifi-properties device show wlan0
           ===========================================================================
                                   Device details (wlan0)
           ===========================================================================
           GENERAL.DEVICE:           wlan0
           GENERAL.TYPE:             wifi
           GENERAL.VENDOR:           Intel Corporation
           GENERAL.PRODUCT:          PRO/Wireless 5100 AGN [Shiloh] Network Connection
           GENERAL.DRIVER:           iwlwifi
           GENERAL.DRIVER-VERSION:   3.8.13-100.fc17.x86_64
           GENERAL.FIRMWARE-VERSION: 8.83.5.1 build 33692
           GENERAL.HWADDR:           00:1E:65:37:A1:D3
           GENERAL.MTU:              1500
           GENERAL.STATE:            100 (connected)
           GENERAL.REASON:           0 (No reason given)
           GENERAL.UDI:              /sys/devices/pci0000:00/0000:00:1c.1/net/wlan0
           GENERAL.IP-IFACE:         wlan0
           GENERAL.IS-SOFTWARE:      no
           GENERAL.NM-MANAGED:       yes
           GENERAL.AUTOCONNECT:      yes
           GENERAL.FIRMWARE-MISSING: no
           GENERAL.CONNECTION:       My Alfa WiFi
           GENERAL.CON-UUID:         85194f4c-d496-4eec-bae0-d880b4cbcf26
           GENERAL.CON-PATH:         /org/freedesktop/NetworkManager/ActiveConnection/
           10
           ---------------------------------------------------------------------------
           WIFI-PROPERTIES.WEP:      yes
           WIFI-PROPERTIES.WPA:      yes
           WIFI-PROPERTIES.WPA2:     yes
           WIFI-PROPERTIES.TKIP:     yes
           WIFI-PROPERTIES.CCMP:     yes
           WIFI-PROPERTIES.AP:       no
           WIFI-PROPERTIES.ADHOC:    yes
           ---------------------------------------------------------------------------

       This command shows information about a Wi-Fi device.

       Example 3. Listing NetworkManager polkit permissions

           $ nmcli general permissions
           PERMISSION                                                VALUE
           org.freedesktop.NetworkManager.enable-disable-network     yes
           org.freedesktop.NetworkManager.enable-disable-wifi        yes
           org.freedesktop.NetworkManager.enable-disable-wwan        yes
           org.freedesktop.NetworkManager.enable-disable-wimax       yes
           org.freedesktop.NetworkManager.sleep-wake                 no
           org.freedesktop.NetworkManager.network-control            yes
           org.freedesktop.NetworkManager.wifi.share.protected       yes
           org.freedesktop.NetworkManager.wifi.share.open            yes
           org.freedesktop.NetworkManager.settings.modify.system     yes
           org.freedesktop.NetworkManager.settings.modify.own        yes
           org.freedesktop.NetworkManager.settings.modify.hostname   auth
           org.freedesktop.NetworkManager.settings.modify.global-dns auth
           org.freedesktop.NetworkManager.reload                     auth

       This command shows configured polkit permissions for various
       NetworkManager operations. These permissions or actions (using polkit
       language) are configured by a system administrator and are not meant to
       be changed by users. The usual place for the polkit configuration is
       /usr/share/polkit-1/actions/org.freedesktop.NetworkManager.policy.
       pkaction command can display description for polkit actions.

             pkaction --action-id org.freedesktop.NetworkManager.network-control --verbose

       More information about polkit can be found at
       http://www.freedesktop.org/wiki/Software/polkit.

       Example 4. Listing NetworkManager log level and domains

           $ nmcli general logging
           LEVEL  DOMAINS
           INFO   PLATFORM,RFKILL,ETHER,WIFI,BT,MB,DHCP4,DHCP6,PPP,WIFI_SCAN,IP4,IP6,A
           UTOIP4,DNS,VPN,SHARING,SUPPLICANT,AGENTS,SETTINGS,SUSPEND,CORE,DEVICE,OLPC,
           WIMAX,INFINIBAND,FIREWALL,ADSL,BOND,VLAN,BRIDGE,DBUS_PROPS,TEAM,CONCHECK,DC
           B,DISPATCH

       This command shows current NetworkManager logging status.

       Example 5. Changing NetworkManager logging

           $ nmcli g log level DEBUG domains CORE,ETHER,IP
           $ nmcli g log level INFO domains DEFAULT

       The first command makes NetworkManager log in DEBUG level, and only for
       CORE, ETHER and IP domains. The second command restores the default
       logging state. Please refer to the NetworkManager.conf(5) manual page
       for available logging levels and domains.

       Example 6. Adding a bonding master and two slave connection profiles

           $ nmcli con add type bond ifname mybond0 mode active-backup
           $ nmcli con add type ethernet ifname eth1 master mybond0
           $ nmcli con add type ethernet ifname eth2 master mybond0

       This example demonstrates adding a bond master connection and two
       slaves. The first command adds a master bond connection, naming the
       bonding interface mybond0 and using active-backup mode. The next two
       commands add slaves connections, both enslaved to mybond0. The first
       slave will be bound to eth1 interface, the second to eth2.

       Example 7. Adding a team master and two slave connection profiles

           $ nmcli con add type team con-name Team1 ifname Team1 config team1-master-json.conf
           $ nmcli con add type ethernet con-name Team1-slave1 ifname em1 master Team1
           $ nmcli con add type ethernet con-name Team1-slave2 ifname em2 master Team1

       This example demonstrates adding a team master connection profile and
       two slaves. It is very similar to the bonding example. The first
       command adds a master team profile, naming the team interface and the
       profile Team1. The team configuration for the master is read from
       team1-master-json.conf file. Later, you can change the configuration
       with modify command (nmcli con modify Team1 team.config
       team1-master-another-json.conf). The last two commands add slaves
       profiles, both enslaved to Team1. The first slave will be bound to em1
       interface, the second to em2. The slaves don't specify config and thus
       teamd will use its default configuration. You will activate the whole
       setup by activating both slaves:

             $ nmcli con up Team1-slave1
             $ nmcli con up Team1-slave2

       By default, the created profiles are marked for auto-activation. But if
       another connection has been activated on the device, the new profile
       won't activate automatically and you need to activate it manually.

       Example 8. Adding a bridge and two slave profiles

           $ nmcli con add type bridge con-name TowerBridge ifname TowerBridge
           $ nmcli con add type ethernet con-name br-slave-1 ifname ens3 master TowerBridge
           $ nmcli con add type ethernet con-name br-slave-2 ifname ens4 master TowerBridge
           $ nmcli con modify TowerBridge bridge.stp no

       This example demonstrates adding a bridge master connection and two
       slaves. The first command adds a master bridge connection, naming the
       bridge interface and the profile as TowerBridge. The next two commands
       add slaves profiles, both will be enslaved to TowerBridge. The first
       slave will be tied to ens3 interface, the second to ens4. The last
       command will disable 802.1D STP for the TowerBridge profile.

       Example 9. Adding an ethernet connection profile with manual IP
       configuration

           $ nmcli con add con-name my-con-em1 ifname em1 type ethernet \
             ip4 192.168.100.100/24 gw4 192.168.100.1 ip4 1.2.3.4 ip6 abbe::cafe
           $ nmcli con mod my-con-em1 ipv4.dns "8.8.8.8 8.8.4.4"
           $ nmcli con mod my-con-em1 +ipv4.dns 1.2.3.4
           $ nmcli con mod my-con-em1 ipv6.dns "2001:4860:4860::8888 2001:4860:4860::8844"
           $ nmcli -p con show my-con-em1

       The first command adds an Ethernet connection profile named my-con-em1
       that is bound to interface name em1. The profile is configured with
       static IP addresses. Three addresses are added, two IPv4 addresses and
       one IPv6. The first IP 192.168.100.100 has a prefix of 24 (netmask
       equivalent of 255.255.255.0). Gateway entry will become the default
       route if this profile is activated on em1 interface (and there is no
       connection with higher priority). The next two addresses do not specify
       a prefix, so a default prefix will be used, i.e. 32 for IPv4 and 128
       for IPv6. The second, third and fourth commands modify DNS parameters
       of the new connection profile. The last con show command displays the
       profile so that all parameters can be reviewed.

       Example 10. Escaping colon characters in tabular mode

           $ nmcli -t -f general -e yes -m tab dev show eth0
           GENERAL:eth0:ethernet:Intel Corporation:82567LM Gigabit Network Connection:
           e1000e:2.1.4-k:1.8-3:00\:22\:68\:15\:29\:21:1500:100 (connected):0 (No reas
           on given):/sys/devices/pci0000\:00/0000\:00\:19.0/net/eth0:eth0:yes:yes:no:
           ethernet-13:89cbcbc6-dc85-456c-9c8b-bd828fee3917:/org/freedesktop/NetworkMa
           nager/ActiveConnection/9

       This example shows escaping colon characters in tabular mode. It may be
       useful for script processing, because ':' is used as a field separator.

       Example 11. nmcli usage in a NetworkManager dispatcher script to make
       Ethernet and Wi-Fi mutually exclusive

           #!/bin/bash
           export LC_ALL=C

           enable_disable_wifi ()
           {
               result=$(nmcli dev | grep "ethernet" | grep -w "connected")
               if [ -n "$result" ]; then
                   nmcli radio wifi off
               else
                   nmcli radio wifi on
               fi
           }

           if [ "$2" = "up" ]; then
               enable_disable_wifi
           fi

           if [ "$2" = "down" ]; then
               enable_disable_wifi
           fi

       This dispatcher script makes Wi-Fi mutually exclusive with wired
       networking. When a wired interface is connected, Wi-Fi will be set to
       airplane mode (rfkilled). When the wired interface is disconnected,
       Wi-Fi will be turned back on. Name this script e.g.
       70-wifi-wired-exclusive.sh and put it into
       /etc/NetworkManager/dispatcher.d/ directory. See NetworkManager(8)
       manual page for more information about NetworkManager dispatcher
       scripts.

       Example sessions of interactive connection editor

       Example 12. Adding an ethernet connection profile in interactive editor
       (a)

           $ nmcli connection edit type ethernet

           ===| nmcli interactive connection editor |===

           Adding a new '802-3-ethernet' connection

           Type 'help' or '?' for available commands.
           Type 'describe [<setting>.<prop>]' for detailed property description.

           You may edit the following settings: connection, 802-3-ethernet (ethernet),
           802-1x, ipv4, ipv6, dcb
           nmcli> print
           ===========================================================================
                                     Connection details
           ===========================================================================
           connection.id:                      ethernet-4
           connection.uuid:                    de89cdeb-a3e1-4d53-8fa0-c22546c775f4
           connection.interface-name:          --
           connection.type:                    802-3-ethernet
           connection.autoconnect:             yes
           connection.autoconnect-priority:    0
           connection.timestamp:               0
           connection.read-only:               no
           connection.permissions:
           connection.zone:                    --
           connection.master:                  --
           connection.slave-type:              --
           connection.secondaries:
           connection.gateway-ping-timeout:    0
           ---------------------------------------------------------------------------
           802-3-ethernet.port:                --
           802-3-ethernet.speed:               0
           802-3-ethernet.duplex:              --
           802-3-ethernet.auto-negotiate:      yes
           802-3-ethernet.mac-address:         --
           802-3-ethernet.cloned-mac-address:  --
           802-3-ethernet.mac-address-blacklist:
           802-3-ethernet.mtu:                 auto
           802-3-ethernet.s390-subchannels:
           802-3-ethernet.s390-nettype:        --
           802-3-ethernet.s390-options:
           ---------------------------------------------------------------------------
           ipv4.method:                        auto
           ipv4.dns:
           ipv4.dns-search:
           ipv4.addresses:
           ipv4.gateway:                       --
           ipv4.routes:
           ipv4.route-metric:                  -1
           ipv4.ignore-auto-routes:            no
           ipv4.ignore-auto-dns:               no
           ipv4.dhcp-client-id:                --
           ipv4.dhcp-send-hostname:            yes
           ipv4.dhcp-hostname:                 --
           ipv4.never-default:                 no
           ipv4.may-fail:                      yes
           ---------------------------------------------------------------------------
           ipv6.method:                        auto
           ipv6.dns:
           ipv6.dns-search:
           ipv6.addresses:
           ipv6.gateway:                       --
           ipv6.routes:
           ipv6.route-metric:                  -1
           ipv6.ignore-auto-routes:            no
           ipv6.ignore-auto-dns:               no
           ipv6.never-default:                 no
           ipv6.may-fail:                      yes
           ipv6.ip6-privacy:                   -1 (unknown)
           ipv6.dhcp-hostname:                 --
           ---------------------------------------------------------------------------
           nmcli> goto ethernet
           You may edit the following properties: port, speed, duplex, auto-negotiate,
            mac-address, cloned-mac-address, mac-address-blacklist, mtu, s390-subchann
           els, s390-nettype, s390-options
           nmcli 802-3-ethernet> set mtu 1492
           nmcli 802-3-ethernet> b
           nmcli> goto ipv4.addresses
           nmcli ipv4.addresses> desc

           === [addresses] ===
           [NM property description]
           Array of IP addresses.

           [nmcli specific description]
           Enter a list of IPv4 addresses formatted as:
             ip[/prefix], ip[/prefix],...
           Missing prefix is regarded as prefix of 32.

           Example: 192.168.1.5/24, 10.0.0.11/24

           nmcli ipv4.addresses> set 192.168.1.100/24
           Do you also want to set 'ipv4.method' to 'manual'? [yes]: yes
           nmcli ipv4.addresses>
           nmcli ipv4.addresses> print
           addresses: 192.168.1.100/24
           nmcli ipv4.addresses> back
           nmcli ipv4> b
           nmcli> set ipv4.gateway 192.168.1.1
           nmcli> verify
           Verify connection: OK
           nmcli> print
           ===========================================================================
                                     Connection details
           ===========================================================================
           connection.id:                      ethernet-4
           connection.uuid:                    de89cdeb-a3e1-4d53-8fa0-c22546c775f4
           connection.interface-name:          --
           connection.type:                    802-3-ethernet
           connection.autoconnect:             yes
           connection.autoconnect-priority:    0
           connection.timestamp:               0
           connection.read-only:               no
           connection.permissions:
           connection.zone:                    --
           connection.master:                  --
           connection.slave-type:              --
           connection.secondaries:
           connection.gateway-ping-timeout:    0
           ---------------------------------------------------------------------------
           802-3-ethernet.port:                --
           802-3-ethernet.speed:               0
           802-3-ethernet.duplex:              --
           802-3-ethernet.auto-negotiate:      yes
           802-3-ethernet.mac-address:         --
           802-3-ethernet.cloned-mac-address:  --
           802-3-ethernet.mac-address-blacklist:
           802-3-ethernet.mtu:                 1492
           802-3-ethernet.s390-subchannels:
           802-3-ethernet.s390-nettype:        --
           802-3-ethernet.s390-options:
           ---------------------------------------------------------------------------
           ipv4.method:                        manual
           ipv4.dns:
           ipv4.dns-search:
           ipv4.addresses:                     192.168.1.100/24
           ipv4.gateway:                       192.168.1.1
           ipv4.routes:
           ipv4.route-metric:                  -1
           ipv4.ignore-auto-routes:            no
           ipv4.ignore-auto-dns:               no
           ipv4.dhcp-client-id:                --
           ipv4.dhcp-send-hostname:            yes
           ipv4.dhcp-hostname:                 --
           ipv4.never-default:                 no
           ipv4.may-fail:                      yes
           ---------------------------------------------------------------------------
           ipv6.method:                        auto
           ipv6.dns:
           ipv6.dns-search:
           ipv6.addresses:
           ipv6.routes:
           ipv6.route-metric:                  -1
           ipv6.ignore-auto-routes:            no
           ipv6.ignore-auto-dns:               no
           ipv6.never-default:                 no
           ipv6.may-fail:                      yes
           ipv6.ip6-privacy:                   -1 (unknown)
           ipv6.dhcp-hostname:                 --
           ---------------------------------------------------------------------------
           nmcli> set ipv4.dns 8.8.8.8 8.8.4.4
           nmcli> print
           ===========================================================================
                                     Connection details
           ===========================================================================
           connection.id:                      ethernet-4
           connection.uuid:                    de89cdeb-a3e1-4d53-8fa0-c22546c775f4
           connection.interface-name:          --
           connection.type:                    802-3-ethernet
           connection.autoconnect:             yes
           connection.autoconnect-priority:    0
           connection.timestamp:               0
           connection.read-only:               no
           connection.permissions:
           connection.zone:                    --
           connection.master:                  --
           connection.slave-type:              --
           connection.secondaries:
           connection.gateway-ping-timeout:    0
           ---------------------------------------------------------------------------
           802-3-ethernet.port:                --
           802-3-ethernet.speed:               0
           802-3-ethernet.duplex:              --
           802-3-ethernet.auto-negotiate:      yes
           802-3-ethernet.mac-address:         --
           802-3-ethernet.cloned-mac-address:  --
           802-3-ethernet.mac-address-blacklist:
           802-3-ethernet.mtu:                 1492
           802-3-ethernet.s390-subchannels:
           802-3-ethernet.s390-nettype:        --
           802-3-ethernet.s390-options:
           ---------------------------------------------------------------------------
           ipv4.method:                        manual
           ipv4.dns:                           8.8.8.8,8.8.4.4
           ipv4.dns-search:
           ipv4.addresses:                     192.168.1.100/24
           ipv4.gateway:                       192.168.1.1
           ipv4.routes:
           ipv4.route-metric:                  -1
           ipv4.ignore-auto-routes:            no
           ipv4.ignore-auto-dns:               no
           ipv4.dhcp-client-id:                --
           ipv4.dhcp-send-hostname:            yes
           ipv4.dhcp-hostname:                 --
           ipv4.never-default:                 no
           ipv4.may-fail:                      yes
           ---------------------------------------------------------------------------
           ipv6.method:                        auto
           ipv6.dns:
           ipv6.dns-search:
           ipv6.addresses:
           ipv6.gateway:                       --
           ipv6.routes:
           ipv6.route-metric:                  -1
           ipv6.ignore-auto-routes:            no
           ipv6.ignore-auto-dns:               no
           ipv6.never-default:                 no
           ipv6.may-fail:                      yes
           ipv6.ip6-privacy:                   -1 (unknown)
           ipv6.dhcp-hostname:                 --
           ---------------------------------------------------------------------------
           nmcli> verify
           Verify connection: OK
           nmcli> save
           Connection 'ethernet-4' (de89cdeb-a3e1-4d53-8fa0-c22546c775f4) successfully
            saved.
           nmcli> quit

       Example session in the nmcli interactive connection editor. The
       scenario creates an Ethernet connection profile with static addressing
       (IPs and DNS).

SEE ALSO

       nmcli(1), NetworkManager(8), NetworkManager.conf(5), nm-settings(5),
       nm-online(1), nm-applet(1), nm-connection-editor(1)