Ubuntu Manpage: ebook-convert

Provided by: calibre_3.21.0+dfsg-1build1_all

NAME

ebook-convert - ebook-convert

ebook-convert input_file output_file [options]

Convert an e-book from one format to another.

input_file is the input and output_file is the output. Both must be specified as the first
two arguments to the command.

The output e-book format is guessed from the file extension of output_file. output_file
can also be of the special format .EXT where EXT is the output file extension. In this
case, the name of the output file is derived from the name of the input file. Note that
the filenames must not start with a hyphen. Finally, if output_file has no extension, then
it is treated as a directory and an "open e-book" (OEB) consisting of HTML files is
written to that directory. These files are the files that would normally have been passed
to the output plugin.

After specifying the input and output file you can customize the conversion by specifying
various options. The available options depend on the input and output file types. To get
help on them specify the input and output file and then use the -h option.

For full documentation of the conversion system see conversion

Whenever you pass arguments to ebook-convert that have spaces in them, enclose the
arguments in quotation marks. For example: "/some path/with spaces"

The options and default values for the options change depending on both the input and
output formats, so you should always check with:

ebook-convert myfile.input_format myfile.output_format -h

Below are the options that are common to all conversion, followed by the options specific
to every input and output format.

• ΠΑΡΑΜΕΤΡΟΙ ΕΙΣΑΓΩΓΗΣ

• ΠΑΡΑΜΕΤΡΟΙ ΕΞΑΓΩΓΗΣ

• LOOK AND FEEL

• HEURISTIC PROCESSING

• ΑΝΑΖΗΤΗΣΗ ΚΑΙ ΑΝΤΙΚΑΤΑΣΤΑΣΗ

• STRUCTURE DETECTION

• ΠΙΝΑΚΑΣ ΠΕΡΙΕΧΟΜΕΝΩΝ

• ΜΕΤΑΔΕΔΟΜΕΝΑ

• DEBUG

--help, -h
Εμφάνιση μηνύματος βοήθειας και έξοδος

--input-profile
Προσδιορισμός του περιγράμματος εισαγωγής. Το περίγραμμα εισαγωγής δίνει
πληροφορίες στο σύστημα μετατροπής για το πως θα ερμηνεύσει διάφορα στοιχεία στο
εισαγόμενο έγγραφο. Π.χ. αποστάσεις που εξαρτώνται από την ανάλυση (αποστάσεις σε
pixels). Οι επιλογές είναι:cybookg3, cybook_opus, default, hanlinv3, hanlinv5,
illiad, irexdr1000, irexdr800, kindle, msreader, mobipocket, nook, sony, sony300,
sony900

--list-recipes
List builtin recipe names. You can create an e-book from a builtin recipe like
this: ebook-convert "Recipe Name.recipe" output.epub

--output-profile
Specify the output profile. The output profile tells the conversion system how to
optimize the created document for the specified device (such as by resizing images
for the device screen size). In some cases, an output profile can be used to
optimize the output for a particular device, but this is rarely necessary. Choices
are:cybookg3, cybook_opus, default, generic_eink, generic_eink_hd,
generic_eink_large, hanlinv3, hanlinv5, illiad, ipad, ipad3, irexdr1000, irexdr800,
jetbook5, kindle, kindle_dx, kindle_fire, kindle_oasis, kindle_pw, kindle_pw3,
kindle_voyage, kobo, msreader, mobipocket, nook, nook_color, nook_hd_plus,
pocketbook_900, pocketbook_pro_912, galaxy, sony, sony300, sony900, sony-landscape,
sonyt3, tablet

--version
show program's version number and exit

ΠΑΡΑΜΕΤΡΟΙ ΕΙΣΑΓΩΓΗΣ

       Παράμετροι για τον έλεγχο της επεξεργασίας του εισαγόμενου αρχείου mobi

       --input-encoding
              Προσδιορισμός κωδικοποίησης χαρακτήρων του εισαγόμενου εγγράφου. Αυτή η επιλογή, αν
              καθορισθεί,  θα έχει προτεραιότητα έναντι οποιασδήποτε άλλης κωδικοποίησης που έχει
              δηλωθεί από το ίδιο το έγγραφο. Ιδιαιτέρως χρήσιμο για  έγγραφα  που  δεν  δηλώνουν
              κωδικοποίηση ή διαθέτουν εσφαλμένη δήλωση κωδικοποίησης.

ΠΑΡΑΜΕΤΡΟΙ ΕΞΑΓΩΓΗΣ

Παράμετροι για τον έλεγχο της επεξεργασίας του εξαγόμενου αρχείου epub

--dont-split-on-page-breaks
Turn off splitting at page breaks. Normally, input files are automatically split at
every page break into two files. This gives an output e-book that can be parsed
faster and with less resources. However, splitting is slow and if your source file
contains a very large number of page breaks, you should turn off splitting on page
breaks.

--epub-flatten
This option is needed only if you intend to use the EPUB with FBReaderJ. It will
flatten the file system inside the EPUB, putting all files into the top level.

--epub-inline-toc
Insert an inline Table of Contents that will appear as part of the main book
content.

--epub-toc-at-end
Put the inserted inline Table of Contents at the end of the book instead of the
start.

--extract-to
Extract the contents of the generated EPUB file to the specified directory. The
contents of the directory are first deleted, so be careful.

--flow-size
Split all HTML files larger than this size (in KB). This is necessary as most EPUB
readers cannot handle large file sizes. The default of 260KB is the size required
for Adobe Digital Editions. Set to 0 to disable size based splitting.

--no-default-epub-cover
Normally, if the input file has no cover and you don't specify one, a default cover
is generated with the title, authors, etc. This option disables the generation of
this cover.

--no-svg-cover
Do not use SVG for the book cover. Use this option if your EPUB is going to be used
on a device that does not support SVG, like the iPhone or the JetBook Lite. Without
this option, such devices will display the cover as a blank page.

--preserve-cover-aspect-ratio
When using an SVG cover, this option will cause the cover to scale to cover the
available screen area, but still preserve its aspect ratio (ratio of width to
height). That means there may be white borders at the sides or top and bottom of
the image, but the image will never be distorted. Without this option the image may
be slightly distorted, but there will be no borders.

--pretty-print
Αν προσδιορισθεί, το πρόσθετο εξόδου θα προσπαθήσει να δημιουργήσει εξαγόμενα όσο
το δυνατόν ανθρωπίνως αναγνώσιμα. Για ορισμένα πρόσθετα εξόδου μπορεί να μην έχει
κανένα αποτέλεσμα.

--toc-title
Title for any generated in-line table of contents.

LOOK AND FEEL

Παράμετροι για τον έλεγχο της εμφάνισης και του ύφους των εξαγομένων

--asciiize
Transliterate unicode characters to an ASCII representation. Use with care because
this will replace unicode characters with ASCII. For instance it will replace
"Михаил Горбачёв" with "Mikhail Gorbachiov". Also, note that in cases where there
are multiple representations of a character (characters shared by Chinese and
Japanese for instance) the representation based on the current calibre interface
language will be used.

--base-font-size
Το μέγεθος αναφοράς, των γραμματοσειρών , σε σημεία (pts). Όλα τα μεγέθη
γραμματοσειρών στο παραγόμενο βιβλίο θα κλιμακωθούν βασιζόμενα σ'αυτό το μέγεθος.
Επιλέγοντας μεγαλύτερο μέγεθος μεγενθύνονται οι γραμματοσειρές στα εξαγόμενα
κείμενα και αντίστροφα. Αρχικά, το μέγεθος αναφοράς επιλέγεται βάσει του
περιγράμματος εξαγωγής που επιλέξατε.

--change-justification
Change text justification. A value of "left" converts all justified text in the
source to left aligned (i.e. unjustified) text. A value of "justify" converts all
unjustified text to justified. A value of "original" (the default) does not change
justification in the source file. Note that only some output formats support
justification.

--disable-font-rescaling
Απενεργοποίηση της επανακλιμάκωσης των μεγεθών των γραμματοσειρών.

--embed-all-fonts
Embed every font that is referenced in the input document but not already embedded.
This will search your system for the fonts, and if found, they will be embedded.
Embedding will only work if the format you are converting to supports embedded
fonts, such as EPUB, AZW3, DOCX or PDF. Please ensure that you have the proper
license for embedding the fonts used in this document.

--embed-font-family
Embed the specified font family into the book. This specifies the "base" font used
for the book. If the input document specifies its own fonts, they may override this
base font. You can use the filter style information option to remove fonts from the
input document. Note that font embedding only works with some output formats,
principally EPUB, AZW3 and DOCX.

--expand-css
By default, calibre will use the shorthand form for various CSS properties such as
margin, padding, border, etc. This option will cause it to use the full expanded
form instead. Note that CSS is always expanded when generating EPUB files with the
output profile set to one of the Nook profiles as the Nook cannot handle shorthand
CSS.

--extra-css
Either the path to a CSS stylesheet or raw CSS. This CSS will be appended to the
style rules from the source file, so it can be used to override those rules.

--filter-css
A comma separated list of CSS properties that will be removed from all CSS style
rules. This is useful if the presence of some style information prevents it from
being overridden on your device. For example:
font-family,color,margin-left,margin-right

--font-size-mapping
Αντιστοίχιση ονομασιών/μεγεθών, σε σημεία (pts), για τις γραμματοσειρές CSS. Π.χ.
12,12,14,16,18,20,22,24. Αυτές είναι οι αντιστοιχίσεις για τα μεγέθη πολύ πολύ
μικρή (xx-small) έως πολύ πολύ μεγάλη (xx-large), με το τελικό μέγεθος να
αντιστοιχεί σε τεράστια γραμματοσειρά. Ο αλγόριθμος κλιμάκωσης γραμματοσειρών
χρησιμοποιεί αυτά τα μεγέθη για να επανακλιμακώνει, με έξυπνο τρόπο, τις
γραμματοσειρές. Η αρχική αντιστοίχιση που χρησιμοποιείται εξαρτάται από το
περίγραμμα εξαγωγής που επιλέξατε.

--insert-blank-line
Insert a blank line between paragraphs. Will not work if the source file does not
use paragraphs (<p> or <div> tags).

--insert-blank-line-size
Set the height of the inserted blank lines (in em). The height of the lines between
paragraphs will be twice the value set here.

--keep-ligatures
Preserve ligatures present in the input document. A ligature is a special rendering
of a pair of characters like ff, fi, fl et cetera. Most readers do not have support
for ligatures in their default fonts, so they are unlikely to render correctly. By
default, calibre will turn a ligature into the corresponding pair of normal
characters. This option will preserve them instead.

--line-height
The line height in pts. Controls spacing between consecutive lines of text. Only
applies to elements that do not define their own line height. In most cases, the
minimum line height option is more useful. By default no line height manipulation
is performed.

--linearize-tables
Μερικά κακοσχεδιασμένα έγγραφα χρησιμοποιούν πίνακες για να ελέγξουν τη διάταξη του
κειμένου στη σελίδα. Όταν μετατρέπονται, μέρος του κειμένου συχνά βγαίνει εκτός της
σελίδας ή παρατηρούνται άλλες ανωμαλίες. Αυτή η παράμετρος εξαγάγει το περιεχόμενο
απ'αυτούς τους πίνακες και το παρουσιάζει με γραμμικό τρόπο.

--margin-bottom
Set the bottom margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.

--margin-left
Set the left margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.

--margin-right
Set the right margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.

--margin-top
Set the top margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.

--minimum-line-height
The minimum line height, as a percentage of the element's calculated font size.
calibre will ensure that every element has a line height of at least this setting,
irrespective of what the input document specifies. Set to zero to disable. Default
is 120%. Use this setting in preference to the direct line height specification,
unless you know what you are doing. For example, you can achieve "double spaced"
text by setting this to 240.

--remove-paragraph-spacing
Remove spacing between paragraphs. Also sets an indent on paragraphs of 1.5em.
Spacing removal will not work if the source file does not use paragraphs (<p> or
<div> tags).

--remove-paragraph-spacing-indent-size
When calibre removes blank lines between paragraphs, it automatically sets a
paragraph indent, to ensure that paragraphs can be easily distinguished. This
option controls the width of that indent (in em). If you set this value negative,
then the indent specified in the input document is used, that is, calibre does not
change the indentation.

--smarten-punctuation
Convert plain quotes, dashes and ellipsis to their typographically correct
equivalents. For details, see https://daringfireball.net/projects/smartypants

--subset-embedded-fonts
Subset all embedded fonts. Every embedded font is reduced to contain only the
glyphs used in this document. This decreases the size of the font files. Useful if
you are embedding a particularly large font with lots of unused glyphs.

--transform-css-rules
Path to a file containing rules to transform the CSS styles in this book. The
easiest way to create such a file is to use the wizard for creating rules in the
calibre GUI. Access it in the "Look & feel->Transform styles" section of the
conversion dialog. Once you create the rules, you can use the "Export" button to
save them to a file.

--unsmarten-punctuation
Convert fancy quotes, dashes and ellipsis to their plain equivalents.

HEURISTIC PROCESSING

Modify the document text and structure using common patterns. Disabled by default. Use
--enable-heuristics to enable. Individual actions can be disabled with the --disable-*
options.

--disable-dehyphenate
Analyze hyphenated words throughout the document. The document itself is used as a
dictionary to determine whether hyphens should be retained or removed.

--disable-delete-blank-paragraphs
Αφαίρεση άδειων παραγράφων από το κείμενο, όταν υπάρχουν μεταξύ κάθε άλλης
παραγράφου

--disable-fix-indents
Turn indentation created from multiple non-breaking space entities into CSS
indents.

--disable-format-scene-breaks
Left aligned scene break markers are center aligned. Replace soft scene breaks that
use multiple blank lines with horizontal rules.

--disable-italicize-common-cases
Look for common words and patterns that denote italics and italicize them.

--disable-markup-chapter-headings
Detect unformatted chapter headings and sub headings. Change them to h2 and h3
tags. This setting will not create a TOC, but can be used in conjunction with
structure detection to create one.

--disable-renumber-headings
Looks for occurrences of sequential <h1> or <h2> tags. The tags are renumbered to
prevent splitting in the middle of chapter headings.

--disable-unwrap-lines
Unwrap lines using punctuation and other formatting clues.

--enable-heuristics
Enable heuristic processing. This option must be set for any heuristic processing
to take place.

--html-unwrap-factor
Scale used to determine the length at which a line should be unwrapped. Valid
values are a decimal between 0 and 1. The default is 0.4, just below the median
line length. If only a few lines in the document require unwrapping this value
should be reduced

--replace-scene-breaks
Replace scene breaks with the specified text. By default, the text from the input
document is used.

ΑΝΑΖΗΤΗΣΗ ΚΑΙ ΑΝΤΙΚΑΤΑΣΤΑΣΗ

       Modify the document text and structure using user defined patterns.

       --search-replace
              Path to a file containing search and replace regular  expressions.  The  file  must
              contain  alternating  lines  of  regular expression followed by replacement pattern
              (which can be an empty line). The regular expression must be in  the  Python  regex
              syntax and the file must be UTF-8 encoded.

       --sr1-replace
              Replacement to replace the text found with sr1-search.

       --sr1-search
              Search pattern (regular expression) to be replaced with sr1-replace.

       --sr2-replace
              Replacement to replace the text found with sr2-search.

       --sr2-search
              Search pattern (regular expression) to be replaced with sr2-replace.

       --sr3-replace
              Replacement to replace the text found with sr3-search.

       --sr3-search
              Search pattern (regular expression) to be replaced with sr3-replace.

STRUCTURE DETECTION

Έλεγχος αυτόματου εντοπισμού της δομής του εγγράφου

--chapter
An XPath expression to detect chapter titles. The default is to consider <h1> or
<h2> tags that contain the words "chapter", "book", "section", "prologue",
"epilogue" or "part" as chapter titles as well as any tags that have
class="chapter". The expression used must evaluate to a list of elements. To
disable chapter detection, use the expression "/". See the XPath Tutorial in the
calibre User Manual for further help on using this feature.

--chapter-mark
Specify how to mark detected chapters. A value of "pagebreak" will insert page
breaks before chapters. A value of "rule" will insert a line before chapters. A
value of "none" will disable chapter marking and a value of "both" will use both
page breaks and lines to mark chapters.

--disable-remove-fake-margins
Some documents specify page margins by specifying a left and right margin on each
individual paragraph. calibre will try to detect and remove these margins.
Sometimes, this can cause the removal of margins that should not have been removed.
In this case you can disable the removal.

--insert-metadata
Insert the book metadata at the start of the book. This is useful if your e-book
reader does not support displaying/searching metadata directly.

--page-breaks-before
An XPath expression. Page breaks are inserted before the specified elements. To
disable use the expression: /

--prefer-metadata-cover
Use the cover detected from the source file in preference to the specified cover.

--remove-first-image
Remove the first image from the input e-book. Useful if the input document has a
cover image that is not identified as a cover. In this case, if you set a cover in
calibre, the output document will end up with two cover images if you do not
specify this option.

--start-reading-at
An XPath expression to detect the location in the document at which to start
reading. Some e-book reading programs (most prominently the Kindle) use this
location as the position at which to open the book. See the XPath tutorial in the
calibre User Manual for further help using this feature.

ΠΙΝΑΚΑΣ ΠΕΡΙΕΧΟΜΕΝΩΝ

Έλεγχος αυτόματης παραγωγής ενός Πίνακα Περιεχομένων. Ως αρχική τιμή, αν το αρχείο
προέλευσης έχει Πίνακα Περιεχομένων, αυτός θα χρησιμοποιηθεί κατά προτεραιότητα σε σχέση
μ'εκείνον που παράγεται αυτόματα.

--duplicate-links-in-toc
When creating a TOC from links in the input document, allow duplicate entries, i.e.
allow more than one entry with the same text, provided that they point to a
different location.

--level1-toc
XPath expression that specifies all tags that should be added to the Table of
Contents at level one. If this is specified, it takes precedence over other forms
of auto-detection. See the XPath Tutorial in the calibre User Manual for examples.

--level2-toc
XPath expression that specifies all tags that should be added to the Table of
Contents at level two. Each entry is added under the previous level one entry. See
the XPath Tutorial in the calibre User Manual for examples.

--level3-toc
XPath expression that specifies all tags that should be added to the Table of
Contents at level three. Each entry is added under the previous level two entry.
See the XPath Tutorial in the calibre User Manual for examples.

--max-toc-links
Μέγιστος αριθμός συνδέσμων που θα προστεθούν στον Πίνακα Περιεχομένων. Δώστε τιμή 0
για απενεργοποίηση. Αρχική τιμή : 50. Μόνο αν εντοπιστούν λιγότερα κεφάλαια από την
τιμή-όριο θα προστεθούν σύνδεσμοι στον Πίνακα Περιεχομένων.

--no-chapters-in-toc
Να μην προστεθούν κεφάλαια, που έχουν εντοπιστεί αυτόματα, στον Πίνακα Περιεχομένων

--toc-filter
Αφαίρεση των καταχωρήσεων, από τον Πίνακα Περιεχομένων, των οποίων οι τίτλοι
ταιριάζουν σε μια προσδιορισμένη κανονική έκφραση. Οι καταχωρήσεις που ταιριάζουν
και τα παιδιά τους αφαιρούνται.

--toc-threshold
Αν εντοπιστούν κεφάλαια λιγότερα απ'αυτόν εδώ τον αριθμό, να προστεθούν σύνδεσμοι
στον Πίνακα Περιεχομένων. Αρχική τιμή : 6

--use-auto-toc
Κανονικά, αν το αρχείο-πηγή έχει ήδη Πίνακα Περιεχομένων, αυτός χρησιμοποιείται
αντί εκείνου που παράγεται αυτόματα. Μ'αυτή εδώ την παράμετρο, χρησιμοποιείται
πάντα ο αυτόματα παραγόμενος.

ΜΕΤΑΔΕΔΟΜΕΝΑ

Παράμετροι για τον καθορισμό των μεταδεδομένων στα εξαγόμενα

--author-sort
Η συμβολοσειρά που θα χρησιμοποιηθεί κατά την ταξινόμηση κατά όνομα συγγραφέα.

--authors
Εισαγωγή συγγραφέων. Πολλαπλοί συγγραφείς θα πρέπει να διαχωρίζονται από το σύμβολο
&.

--book-producer
Καθορισμός του εκδότη του βιβλίου.

--comments
Set the e-book description.

--cover
Set the cover to the specified file or URL

--isbn Εισαγωγή του κωδικού ISBN του βιβλίου

--language
Ρυθμίστε την γλώσσα.

--pubdate
Set the publication date (assumed to be in the local timezone, unless the timezone
is explicitly specified)

--publisher
Set the e-book publisher.

--rating
Καταχώρηση βαθμολογίας. Επιλέξτε ένα νούμερο από 1 έως και 5.

--read-metadata-from-opf, --from-opf, -m
Ανάγνωση μεταδεδομένων από τo προσδιορισθέν αρχείο OPF. Τα μεταδεδομένα που θα
διαβαστούν απ' αυτό το αρχείο θα υπερισχύσουν των μεταδομένων του πηγαίου αρχείου.

--series
Set the series this e-book belongs to.

--series-index
Set the index of the book in this series.

--tags Set the tags for the book. Should be a comma separated list.

--timestamp
Set the book timestamp (no longer used anywhere)

--title
Εισαγωγή τίτλου.

--title-sort
The version of the title to be used for sorting.

DEBUG

       Παράμετροι που βοηθούν στη διόρθωση (αποσφαλμάτωση) της μετατροπής

       --debug-pipeline, -d
              Αποθήκευση των εξαγομένων από διαφορετικά στάδια της διαδικασίας  μετατροπής,  στον
              φάκελο  που  έχει  προσδιοριστεί.  Χρήσιμο  όταν δε γνωρίζετε το ακριβές στάδιο της
              διαδικασίας μετατροπής όπου εμφανίζεται κάποιο σφάλμα.

       --verbose, -v
              Level of verbosity. Specify multiple times for  greater  verbosity.  Specifying  it
              twice  will  result  in  full verbosity, once medium verbosity and zero times least
              verbosity.

AUTHOR

       Kovid Goyal

COPYRIGHT

       Kovid Goyal